Skip to content

L
linux
Switch branch/tag
  1. 06 Jul, 2018 8 commits
    • Jiong Wang's avatar
      nfp: bpf: rename umin/umax to umin_src/umax_src · 662c5472
      Jiong Wang authored 
      The two fields are a copy of umin and umax info of bpf_insn->src_reg
generated by verifier.

Rename to make their meaning clear.
Signed-off-by: default avatarJiong Wang <jiong.wang@netronome.com>
Reviewed-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: default avatarSong Liu <songliubraving@fb.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      662c5472
    • Jiong Wang's avatar
      lib: reciprocal_div: implement the improved algorithm on the paper mentioned · 06ae4826
      Jiong Wang authored 
      The new added "reciprocal_value_adv" implements the advanced version of the
algorithm described in Figure 4.2 of the paper except when
"divisor > (1U << 31)" whose ceil(log2(d)) result will be 32 which then
requires u128 divide on host. The exception case could be easily handled
before calling "reciprocal_value_adv".

The advanced version requires more complex calculation to get the
reciprocal multiplier and other control variables, but then could reduce
the required emulation operations.

It makes no sense to use this advanced version for host divide emulation,
those extra complexities for calculating multiplier etc could completely
waive our saving on emulation operations.

However, it makes sense to use it for JIT divide code generation (for
example eBPF JIT backends) for which we are willing to trade performance of
JITed code with that of host. As shown by the following pseudo code, the
required emulation operations could go down from 6 (the basic version) to 3
or 4.

To use the result of "reciprocal_value_adv", suppose we want to calculate
n/d, the C-style pseudo code will be the following, it could be easily
changed to real code generation for other JIT targets.

  struct reciprocal_value_adv rvalue;
  u8 pre_shift, exp;

  // handle exception case.
  if (d >= (1U << 31)) {
    result = n >= d;
    return;
  }
  rvalue = reciprocal_value_adv(d, 32)
  exp = rvalue.exp;
  if (rvalue.is_wide_m && !(d & 1)) {
    // floor(log2(d & (2^32 -d)))
    pre_shift = fls(d & -d) - 1;
    rvalue = reciprocal_value_adv(d >> pre_shift, 32 - pre_shift);
  } else {
    pre_shift = 0;
  }

  // code generation starts.
  if (imm == 1U << exp) {
    result = n >> exp;
  } else if (rvalue.is_wide_m) {
    // pre_shift must be zero when reached here.
    t = (n * rvalue.m) >> 32;
    result = n - t;
    result >>= 1;
    result += t;
    result >>= rvalue.sh - 1;
  } else {
    if (pre_shift)
      result = n >> pre_shift;
    result = ((u64)result * rvalue.m) >> 32;
    result >>= rvalue.sh;
  }
Signed-off-by: default avatarJiong Wang <jiong.wang@netronome.com>
Reviewed-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      06ae4826
    • Roman Gushchin's avatar
      bpftool: add bash completion for cgroup tree command · 02000b55
      Roman Gushchin authored 
      This commit adds a bash completion to the bpftool cgroup tree
command.
Signed-off-by: default avatarRoman Gushchin <guro@fb.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Acked-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      02000b55
    • Roman Gushchin's avatar
      bpftool: document cgroup tree command · 7d31a0a1
      Roman Gushchin authored 
      Describe cgroup tree command in the corresponding bpftool man page.
Signed-off-by: default avatarRoman Gushchin <guro@fb.com>
Acked-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      7d31a0a1
    • Roman Gushchin's avatar
      bpftool: introduce cgroup tree command · 2058b383
      Roman Gushchin authored 
      This commit introduces a new bpftool command: cgroup tree.
The idea is to iterate over the whole cgroup tree and print
all attached programs.

I was debugging a bpf/systemd issue, and found, that there is
no simple way to listen all bpf programs attached to cgroups.
I did master something in bash, but after some time got tired of it,
and decided, that adding a dedicated bpftool command could be
a better idea.

So, here it is:
  $ sudo ./bpftool cgroup tree
  CgroupPath
  ID       AttachType      AttachFlags     Name
  /sys/fs/cgroup/system.slice/systemd-machined.service
      18       ingress
      17       egress
  /sys/fs/cgroup/system.slice/systemd-logind.service
      20       ingress
      19       egress
  /sys/fs/cgroup/system.slice/systemd-udevd.service
      16       ingress
      15       egress
  /sys/fs/cgroup/system.slice/systemd-journald.service
      14       ingress
      13       egress
Signed-off-by: default avatarRoman Gushchin <guro@fb.com>
Acked-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      2058b383
    • David S. Miller's avatar
      Merge branch 'IP-listification-follow-ups' · ab8565af
      David S. Miller authored 
      Edward Cree says:

====================
IP listification follow-ups

While working on IPv6 list processing, I found another bug in the IPv4
 version.  So this patch series has that fix, and the IPv6 version with
 both fixes incorporated.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ab8565af
    • Edward Cree's avatar
      net: ipv6: listify ipv6_rcv() and ip6_rcv_finish() · d8269e2c
      Edward Cree authored 
      Essentially the same as the ipv4 equivalents.
Signed-off-by: default avatarEdward Cree <ecree@solarflare.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d8269e2c
    • Edward Cree's avatar
      net: ipv4: fix list processing on L3 slave devices · efe6aaca
      Edward Cree authored 
      If we have an L3 master device, l3mdev_ip_rcv() will steal the skb, but
 we were returning NET_RX_SUCCESS from ip_rcv_finish_core() which meant
 that ip_list_rcv_finish() would keep it on the list.  Instead let's
 move the l3mdev_ip_rcv() call into the caller, so that our response to
 a steal can be different in the single packet path (return
 NET_RX_SUCCESS) and the list path (forget this packet and continue).

Fixes: 5fa12739 ("net: ipv4: listify ip_rcv_finish")
Signed-off-by: default avatarEdward Cree <ecree@solarflare.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      efe6aaca
  3. 05 Jul, 2018 32 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7