- 26 Sep, 2012 12 commits
-
-
Hans Verkuil authored
ENODATA should be returned if the API used for getting, changing, querying or enumerating the current video timings is not supported by the current input or output. This was decided during the 2012 Media Workshop. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
A number of old drivers still had the experimental tag. Time to remove it. It concerns the following drivers: VIDEO_TLV320AIC23B USB_STKWEBCAM VIDEO_CX18 VIDEO_CX18_ALSA VIDEO_ZORAN_AVS6EYES DVB_USB_AF9005 MEDIA_TUNER_TEA5761 VIDEO_NOON010PC30 This decision was taken during the 2012 Media Workshop. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Hans Verkuil authored
As per decision taken during the 2012 Media Workshop. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Hans Verkuil authored
V4L2_BUF_TYPE_PRIVATE was used in these driver for internal purposes. It turned out though that it wasn't used at all, so it could be removed. I know it was used in the past, but clearly later changes made this obsolete. Signed-off-by:
-
Hans Verkuil authored
This buffer type isn't used at all, and since it is effectively undefined what it should do it is deprecated. The define still exists, but any internal support for such buffers is removed. The decisions to deprecate this was taken during the 2012 Media Workshop. Signed-off-by:
-
Hans Verkuil authored
Prefix bus_info with "platform:". Signed-off-by:
-
Hans Verkuil authored
During the 2012 Media Workshop it was decided that bus_info as returned by VIDIOC_QUERYCAP can no longer be empty. It should be a unique identifier, and empty strings are obviously not unique. Signed-off-by:
-
Hans Verkuil authored
- S/TRY_FMT should always succeed, unless an invalid type field is passed in. - TRY_FMT should give the same result as S_FMT, all other things being equal. - ENUMFMT may return different formats for different inputs or outputs. This was decided during the 2012 Media Workshop. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
-
Hans Verkuil authored
Specify that STREAMON/OFF should return 0 if the stream is already started/stopped. The spec never specified what the correct behavior is. This ambiguity was resolved during the 2012 Media Workshop. Signed-off-by:
-
Hans Verkuil authored
During the 2012 Media Workshop it was decided to split off the control definitions into their own v4l2-controls.h header, included by videodev2.h. Because controls make up such a large part of V4L2 they made it hard to read videodev2.h. Splitting off the control definitions makes life easier. Signed-off-by:
-
Sakari Ailus authored
Remove experimantal tag from the following API elements: V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY buffer type. V4L2_CAP_VIDEO_OUTPUT_OVERLAY capability flag. VIDIOC_ENUM_FRAMESIZES IOCTL. VIDIOC_ENUM_FRAMEINTERVALS IOCTL. VIDIOC_G_ENC_INDEX IOCTL. VIDIOC_ENCODER_CMD and VIDIOC_TRY_ENCODER_CMD IOCTLs. VIDIOC_DECODER_CMD and VIDIOC_TRY_DECODER_CMD IOCTLs. Signed-off-by:
-
Hans Verkuil authored
Remove the printk.h include: this header is already via kernel.h, so, there's no need to explicitly add it at ivtv-alsa-pcm.c. Signed-off-by:
Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
- 25 Sep, 2012 7 commits
-
-
David Härdeman authored
Change winbond-cir's tx support to be asynchronous and not to mess with the TX buffer. Essentially the winbond-cir counterpart to the patch Sean Young sent for iguanair. Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
David Härdeman authored
This is a minor correctness fix for the duration calculation in winbond-cir (the read value should be incremented by one). Signed-off-by:
-
Ezequiel Garcia authored
If start_streaming() fails (e.g. out of memory) the driver needs to rewind the start procedure. This implies possibly stopping the device and clearing the buffer queue. Signed-off-by:
Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by:
-
Ezequiel Garcia authored
The driver was expecting to get a valid pixelformat on s_fmt and try_fmt. This is wrong, since the user may pass a bitmask and expect the driver to change it, returning a valid (fourcc) pixelformat. This problem was spotted by v4l2-compliance. Signed-off-by:
-
Ezequiel Garcia authored
When an urb buffer can't be allocated, the currently allocated buffer count must be saved so they can properly released. Moreover, it's sufficient to call stk1160_free_isoc to have all urb buffers released. Signed-off-by:
-
Ezequiel Garcia authored
This is just a cleaning patch to produce more useful debug messages. Signed-off-by:
-
Lad, Prabhakar authored
due to structure change for video drivers, change the description with correct path. Signed-off-by:
Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by:
Manjunath Hadli <manjunath.hadli@ti.com> Signed-off-by:
-
- 24 Sep, 2012 2 commits
-
-
Evgeny Plehov authored
Adds support for filtering multistream TS using stv090x hardware. Signed-off-by:
Evgeny Plehov <EvgenyPlehov@ukr.net> Signed-off-by:
-
Evgeny Plehov authored
Document the multistream support at the DVBAPI, describing what delivery systems currently support it (DVB-T2, DVB-S2, ISDB-S). DVBAPI version increased to 5.8. [mchehab@redhat.com: Made some corrections - mostly language] Signed-off-by:
-
- 23 Sep, 2012 19 commits
-
-
Evgeny Plehov authored
Unify multistream support at the DVBAPI: several delivery systems allow it. Yet, each one had its own name. So, instead of adding a third version of this field, remove the per-standard naming, unifying it into a common name. The legacy code number can still be used by old applications. Version increased to 5.8. [mchehab@redhat.com: joined the va1j5jf007s patch, in order to avoid compilation breakage] Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Plain '-1' is not very good error code. Use more suitable error code definitions. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
... and some minor logging changes. Signed-off-by:
-
Antti Palosaari authored
This optimizes few hundred bytes from data to text segment. Also remove one unused function that was commented out already. Signed-off-by:
-
Antti Palosaari authored
Use .get_if_frequency() as all used tuner drivers (mt2060/qt1010/mxl5005s) supports it. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
