- 01 Aug, 2006 2 commits
-
-
Sam Ravnborg authored
Signed-off-by:Sam Ravnborg <sam@ravnborg.org>
-
Sam Ravnborg authored
When we introduced -rR then aic7xxx no loger could pick up definition of YACC&LEX from make - so do it explicit now. Signed-off-by:
-
- 31 Jul, 2006 38 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Minor comment fix for misc_64.S [POWERPC] Use H_CEDE on non-SMT [POWERPC] force 64bit mode in fwnmi handlers to workaround firmware bugs [POWERPC] PMAC_APM_EMU should depend on ADB_PMU [POWERPC] Fix new interrupt code (MPIC detection) [POWERPC] Fix new interrupt code (MPIC endianness) [POWERPC] Add cpufreq support for Xserve G5 [POWERPC] Xserve G5 thermal control fixes [POWERPC] Fix mem= handling when the memory limit is > RMO size [POWERPC] More offb/bootx fixes [POWERPC] Fix legacy_serial.c error handling on 32 bits [POWERPC] Fix default clock for udbg_16550 [POWERPC] Fix non-MPIC CHRPs with CONFIG_SMP set [POWERPC] Fix 32 bits warning in prom_init.c [POWERPC] Workaround Pegasos incorrect ISA "ranges" [POWERPC] fix up front-LED Kconfig
-
Guido Guenther authored
Since we now use the generic backlight infrastructure, I think we need to call rivafb_bl_init before calling register_framebuffer since otherwise rivafb_bl_init might race with the framebuffer layer already opening the device and setting up the video mode. In this case we might end up with a not yet fully intialized backlight (info->bl_dev still NULL) when calling riva_bl_set_power via rivafb_set_par/rivafb_load_video_mode and the kernel dies without any further notice during boot. This fixes booting current git on a PB 6,1. In this case radeonfb/atyfb would be affected too - I can fix that too but don't have any hardware to test this on. Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Arthur Othieno authored
CONFIG_FB_NVIDIA already depends on CONFIG_PCI in drivers/video/Kconfig. Driver does an extra ``sanity check'' which is then redundant. Signed-off-by:
Arthur Othieno <apgo@patchbomb.org> Cc: Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Michael Hanselmann authored
This patch fixes several problems: - The legacy backlight value might be set at interrupt time. Introduced a worker to prevent it from directly calling the backlight code. - via-pmu allows the backlight to be grabbed, in which case we need to prevent other kernel code from changing the brightness. - Don't send PMU requests in via-pmu-backlight when the machine is about to sleep or waking up. - More Kconfig fixes. Signed-off-by:
Michael Hanselmann <linux-kernel@hansmi.ch> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Volker Braun authored
Many IBM Thinkpad T4* models and some R* and X* with radeon video cards draw too much power when suspended to RAM, reducing drastically the battery lifetime. The solution is to enable suspend-to-D2 on these machines. They are whitelisted through their subsystem vendor/device ID. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=3022 The patch introduces a framework to alter the pm_mode and reinit_func fields of the radeonfb_info structure based on a whitelist. This should facilitate future hardware-dependent workarounds. The workaround for the Samsung P35 that is already in the radeonfb code has been rewritten using this framework. The behavior can be overridden with module options: i) video=radeonfb:force_sleep=1 enable suspend-to-D2 also on non-whitelisted machines (useful for testing new notebook models), ii) video=radeonfb:ignore_devlist=1 Disable checking the whitelist and do not apply any workarounds. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Antonino A. Daplas authored
The backlight and lcd subsystems can be notified by the framebuffer layer of blanking events. However, these subsystems, as a whole, can function independently from the framebuffer layer. But in order to enable to the lcd and backlight subsystems, the framebuffer has to be compiled also, effectively sucking in a huge amount of unneeded code. To prevent dependency problems, separate out the framebuffer notification mechanism from the framebuffer layer and permanently link it to the kernel. Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Eric Van Hensbergen authored
Based on a bug report from Russ Ross <russruss@gmail.com> According to the spec: "The remove request asks the file server both to remove the file represented by fid and to clunk the fid, even if the remove fails." but the Linux client seems to expect the fid to be valid after a failed remove attempt. Specifically, I'm getting this behavior when attempting to remove a non-empty directory. Signed-off-by:
Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by:
-
Randy Dunlap authored
Use preferred email address. Remove sf.net project reference. It is no longer used. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Russ Ross authored
Signed-off-by:
Russ Ross <russross@gmail.com> Signed-off-by:
-
Badari Pulavarty authored
For files other than IFREG, nobh option doesn't make sense. Modifications to them are journalled and needs buffer heads to do that. Without this patch, we get kernel oops in page_buffers(). Signed-off-by:
Badari Pulavarty <pbadari@us.ibm.com> Cc: <stable@kernel.org> Signed-off-by:
-
Josh Triplett authored
kernel/timer.c defines a (per-cpu) pointer to tvec_base_t, but initializes it using { &a_tvec_base_t }, which sparse warns about; change this to just &a_tvec_base_t. Signed-off-by:Josh Triplett <josh@freedesktop.org> Signed-off-by:
-
Josh Triplett authored
Commit 7b2fd697427e73c81d5fa659efd91bd07d303b0e in the historical GIT tree stopped calling the readdir member of a file_operations struct with the big kernel lock held, and fixed up all the readdir functions to do their own locking. However, that change added calls to unlock_kernel() in vxfs_readdir, but no call to lock_kernel(). Fix this by adding a call to lock_kernel(). Signed-off-by:
-
Thomas Horsley authored
I spent a long time the other day trying to examine an initrd image on a fedora core 5 system because the initrd.txt file is apparently obsolete. Here is a patch which I hope will reduce future confusion for others. Signed-off-by:
Thomas Horsley <tom.horsley@ccur.com> Signed-off-by:
-
Ingo Molnar authored
Clean up ipc/msg.c to conform to Documentation/CodingStyle. (before it was an inconsistent hodepodge of various coding styles) Verified that the before/after .o's are identical. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Miklos Szeredi authored
Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Miklos Szeredi authored
It is entirely possible (though rare) that jiffies half-wraps around, while a dentry/inode remains in the cache. This could mean that the dentry/inode is not invalidated for another half wraparound-time. To get around this problem, use 64-bit jiffies. The only problem with this is that dentry->d_time is 32 bits on 32-bit archs. So use d_fsdata as the high 32 bits. This is an ugly hack, but far simpler, than having to allocate private data just for this purpose. Since 64-bit jiffies can be assumed never to wrap around, simple comparison can be used, and a zero time value can represent "invalid". Signed-off-by:
-
Miklos Szeredi authored
An attribute and entry timeout of zero should mean, that the entity is invalidated immediately after the operation. Previously invalidation only happened at the next clock tick. Reported and tested by Craig Davies. Signed-off-by:
-
Markus Armbruster authored
CFA needs to be adjusted upwards for push, and downwards for pop. arch/i386/kernel/entry.S gets it wrong in one place. Signed-off-by:
Markus Armbruster <armbru@redhat.com> Acked-by:
Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Roland McGrath authored
The latest toolchains can produce a new ELF section in DSOs and dynamically-linked executables. The new section ".gnu.hash" replaces ".hash", and allows for more efficient runtime symbol lookups by the dynamic linker. The new ld option --hash-style={sysv|gnu|both} controls whether to produce the old ".hash", the new ".gnu.hash", or both. In some new systems such as Fedora Core 6, gcc by default passes --hash-style=gnu to the linker, so that a standard invocation of "gcc -shared" results in producing a DSO with only ".gnu.hash". The new ".gnu.hash" sections need to be dealt with the same way as ".hash" sections in all respects; only the dynamic linker cares about their contents. To work with older dynamic linkers (i.e. preexisting releases of glibc), a binary must have the old ".hash" section. The --hash-style=both option produces binaries that a new dynamic linker can use more efficiently, but an old dynamic linker can still handle. The new section runs afoul of the custom linker scripts used to build vDSO images for the kernel. On ia64, the failure mode for this is a boot-time panic because the vDSO's PT_IA_64_UNWIND segment winds up ill-formed. This patch addresses the problem in two ways. First, it mentions ".gnu.hash" in all the linker scripts alongside ".hash". This produces correct vDSO images with --hash-style=sysv (or old tools), with --hash-style=gnu, or with --hash-style=both. Second, it passes the --hash-style=sysv option when building the vDSO images, so that ".gnu.hash" is not actually produced. This is the most conservative choice for compatibility with any old userland. There is some concern that some ancient glibc builds (though not any known old production system) might choke on --hash-style=both binaries. The optimizations provided by the new style of hash section do not really matter for a DSO with a tiny number of symbols, as the vDSO has. If someone wants to use =gnu or =both for their vDSO builds and worry less about that compatibility, just change the option and the linker script changes will make any choice work fine. Signed-off-by:Roland McGrath <roland@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Andi Kleen <ak@muc.de> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Michael Buesch authored
The geode hwrng leaks an iomapped resource, if hwrng_register() fails. This fixes it. Signed-off-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
Michael Buesch authored
The intel hwrng leaks an iomapped resource, if hwrng_register() failes. This fixes it. Signed-off-by:
-
Rolf Eike Beer authored
kmem_cache_alloc() was documented twice, but kmem_cache_zalloc() never. Fix this obvious typo to get things right. Signed-off-by:
Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by:
-
Steven Rostedt authored
In order to prevent Doc Rot, this patch adds a reference to the design document for rtmutex.c in rtmutex.c. So when someone needs to update or change the design of that file they will know that a document actually exists that explains the design (helping them change it), and hopefully that they will update the document if they too change the design. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
-
Uwe Zeisberger authored
There is currently no affected user in the tree, but usage is less surprising that way. Signed-off-by:
Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by:
-
Tim Chen authored
The recent changes from irqtrace feature has added overheads to local_bh_disable and local_bh_enable that reduces UDP performance across x86_64 and IA64, even though IA64 does not support the irqtrace feature. Patch in question is [PATCH]lockdep: irqtrace subsystem, core http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=c ommit;h=de30a2b3 Prior to this patch, local_bh_disable was a short macro. Now it is a function which calls __local_bh_disable with added irq flags save and restore. The irq flags save and restore were also added to local_bh_enable, probably for injecting the trace irqs code. This overhead is on the generic code path across all architectures. On a IA_64 test machine (Itanium-2 1.6 GHz) running a benchmark like netperf's UDP streaming test, the added overhead results in a drop of 3% in throughput, as udp_sendmsg calls the local_bh_enable/disable several times. Other workloads that have heavy usages of local_bh_enable/disable could also be affected. The patch ideally should not have affected IA-64 performance as it does not have IRQ tracing support. A significant portion of the overhead is in the added irq flags save and restore, which I think is not needed if IRQ tracing is unused. A suggested patch is attached below that recovers the lost performance. However, the "ifdef"s in the patch are a bit ugly. Signed-off-by:
Tim Chen <tim.c.chen@intel.com> Acked-by:
-
Pete Zaitcev authored
Change "Thrid" into "Third", and realign similarly to other entries. Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Cc: <device@lanana.org> Signed-off-by:
-
Josh Triplett authored
Signed-off-by:
-
Josh Triplett authored
ufs_symlink, in one of its error paths, calls unlock_kernel without ever having called lock_kernel(); fix this by creating and jumping to a new label out_notlocked rather than the out label used after calling lock_kernel(). Signed-off-by:
-
Josh Triplett authored
The EFS filesystem does not have an entry in MAINTAINERS; add one, giving the EFS filesystem and listing the status as Orphan, per the note on that page saying "I'm no longer actively maintaining EFS". Signed-off-by:
-
Josh Triplett authored
If efs_symlink_readpage hits the -ENAMETOOLONG error path, it will call unlock_kernel without ever having called lock_kernel(); fix this by creating and jumping to a new label fail_notlocked rather than the fail label used after calling lock_kernel(). Signed-off-by:
-
Josh Triplett authored
Commit 398c53a757702e1e3a7a2c24860c7ad26acb53ed (in the historical GIT tree) moved the lock_kernel() in coda_open after the allocation of a coda_file_info struct, but left an unlock_kernel() in the allocation failure error path; remove it. Signed-off-by:
Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by:
-
Ondrej Zary authored
swsusp is unable to suspend my machine (DTK FortisPro TOP-5A notebook) with kernel 2.6.17.5 because it's unable to suspend PNP device 00:16 (mouse). The problem is in PNP BIOS. pnp_bus_suspend() calls pnp_stop_dev() for the device if the device can be disabled according to pnp_can_disable(). The problem is that pnpbios_disable_resources() returns -EPERM if the device is not dynamic (!pnpbios_is_dynamic()) but insert_device() happily sets PNP_DISABLE capability/flag even if the device is not dynamic. So we try to disable non-dynamic devices which will fail. This patch prevents insert_device() from setting PNP_DISABLE if the device is not dynamic and fixes suspend on my system. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Arjan van de Ven authored
This is a real deadlock, a nice complex one: (warning: long explanation follows so that Andrew can have a complete patch description) it's an ABCDA deadlock: A iprune_mutex B inode->inotify_mutex C ih->mutex D dev->ev_mutex The AB relationship comes straight from invalidate_inodes() int invalidate_inodes(struct super_block * sb) { int busy; LIST_HEAD(throw_away); mutex_lock(&iprune_mutex); spin_lock(&inode_lock); inotify_unmount_inodes(&sb->s_inodes); where inotify_umount_inodes() takes the mutex_lock(&inode->inotify_mutex); The BC relationship comes directly from inotify_find_update_watch(): s32 inotify_find_update_watch(struct inotify_handle *ih, struct inode *inode, u32 mask) { ... mutex_lock(&inode->inotify_mutex); mutex_lock(&ih->mutex); The CD relationship comes from inotify_rm_wd: inotify_rm_wd does mutex_lock(&inode->inotify_mutex); mutex_lock(&ih->mutex) and then calls inotify_remove_watch_locked() which calls notify_dev_queue_event() which does mutex_lock(&dev->ev_mutex); (this strictly is a BCD relationship) The DA relationship comes from the most interesting part: [<ffffffff8022d9f2>] shrink_icache_memory+0x42/0x270 [<ffffffff80240dc4>] shrink_slab+0x11d/0x1c9 [<ffffffff802b5104>] try_to_free_pages+0x187/0x244 [<ffffffff8020efed>] __alloc_pages+0x1cd/0x2e0 [<ffffffff8025e1f8>] cache_alloc_refill+0x3f8/0x821 [<ffffffff8020a5e5>] kmem_cache_alloc+0x85/0xcb [<ffffffff802db027>] kernel_event+0x2e/0x122 [<ffffffff8021d61c>] inotify_dev_queue_event+0xcc/0x140 inotify_dev_queue_event schedules a kernel_event which does a kmem_cache_alloc( , GFP_KERNEL) which may try to shrink slabs, including the inode cache .. which then takes iprune_mutex. And voila, there is an AB, a BC, a CD relationship (even a direct BCD), and also now a DA relationship -> a circular type AB-BA deadlock but involving 4 locks. The solution is simple: kernel_event() is NOT allowed to use GFP_KERNEL, but must use GFP_NOFS to not cause recursion into the VFS. Signed-off-by:Arjan van de Ven <arjan@linux.intel.com> Acked-by:
Robert Love <rml@novell.com> Signed-off-by:
-
Steven Rostedt authored
Since I didn't know about the linux-mm mailing list until I spammed all those that had their names anywhere in the mm directory, I'm sending this patch to add the linux-mm mailing list to the MAINTAINERS file. Also, since mm is so broad, it doesn't have a single person to maintain it, and thus no maintainer is listed. I also left the status as Maintained, since it obviously is. Signed-off-by:
-
Heiko Carstens authored
Initialize init task's pi_waiters plist. Otherwise cpu hotplug of cpu 0 might crash, since rt_mutex_getprio() accesses an uninitialized list head. call chain which led to crash: take_cpu_down sched_idle_next __setscheduler rt_mutex_getprio Using PLIST_HEAD_INIT in the INIT_TASK macro doesn't work unfortunately, since the pi_waiters member is only conditionally present. Cc: Arjan van de Ven <arjan@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Olaf Hering authored
Hide the video drivers for onboard graphics found in early PCI PowerMacs in Apple G5 config files. drivers/built-in.o: In function `.platinumfb_probe': platinumfb.c:(.text+0x377a0): undefined reference to `.nvram_read_byte' platinumfb.c:(.text+0x37830): undefined reference to `.nvram_read_byte' drivers/built-in.o: In function `.control_init': controlfb.c:(.init.text+0x1938): undefined reference to `.nvram_read_byte' controlfb.c:(.init.text+0x1968): undefined reference to `.nvram_read_byte' drivers/built-in.o: In function `.valkyriefb_init': (.init.text+0x2300): undefined reference to `.nvram_read_byte' drivers/built-in.o:(.init.text+0x239c): more undefined references to `.nvram_read_byte' follow Signed-off-by:
Olaf Hering <olh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Olaf Hering authored
Enable mac partition table support per default also for a powermac config. Signed-off-by:
-
Daniel Ritz authored
Values displayed when by cardctl config are horribly wrong for 16bit cards. this fixes it up by not using memcpy() since source and target struct are very different. Signed-off-by:
Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
