The arm64 MMU supports a Contiguous bit which is a hint that the TTE
is one of a set of contiguous entries which can be cached in a single
TLB entry.  Supporting this bit adds new intermediate huge page sizes.

The set of huge page sizes available depends on the base page size.
Without using contiguous pages the huge page sizes are as follows.

 4KB:   2MB  1GB
64KB: 512MB

With a 4KB granule, the contiguous bit groups together sets of 16 pages
and with a 64KB granule it groups sets of 32 pages.  This enables two new
huge page sizes in each case, so that the full set of available sizes
is as follows.

 4KB:  64KB   2MB  32MB  1GB
64KB:   2MB 512MB  16GB

If a 16KB granule is used then the contiguous bit groups 128 pages
at the PTE level and 32 pages at the PMD level.

If the base page size is set to 64KB then 2MB pages are enabled by
default.  It is possible in the future to make 2MB the default huge
page size for both 4KB and 64KB granules.
Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com>
Reviewed-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: David Woods <dwoods@ezchip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

In systems with three levels of cache(PoU at L1 and PoC at L3),
PoC cache flush instructions flushes L2 and L3 caches which could affect
performance.
For cache flushes for I and D coherency, PoU should suffice.
So changing all I and D coherency related cache flushes to PoU.

Introduced a new __clean_dcache_area_pou API for dcache flush till PoU
and provided a common macro for __flush_dcache_area and
__clean_dcache_area_pou.

Also, now in __sync_icache_dcache, icache invalidation for non-aliasing
VIPT icache is done only for that particular page instead of the earlier
__flush_icache_all.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Defer dcache flushing to __sync_icache_dcache by calling
flush_dcache_page which clears PG_dcache_clean flag.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ashok Kumar <ashoks@broadcom.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The code for switching to irq_stack stores three pieces of information on
the stack, fp+lr, as a fake stack frame (that lets us walk back onto the
interrupted tasks stack frame), and the address of the struct pt_regs that
contains the register values from kernel entry. (which dump_backtrace()
will print in any stack trace).

To reduce this, we store fp, and the pointer to the struct pt_regs.
unwind_frame() can recognise this as the irq_stack dummy frame, (as it only
appears at the top of the irq_stack), and use the struct pt_regs values
to find the missing interrupted link-register.
Suggested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Merge in EFI memblock changes from Ard, which form the preparatory work
for UEFI support on 32-bit ARM.

In paging_init, we allocate the zero page, memset it to zero and then
point TTBR0 to it in order to avoid speculative fetches through the
identity mapping.

In order to guarantee that the freshly zeroed page is indeed visible to
the page table walker, we need to execute a dsb instruction prior to
writing the TTBR.

Cc: <stable@vger.kernel.org> # v3.14+, for older kernels need to drop the 'ishst'
Signed-off-by: Will Deacon <will.deacon@arm.com>

It's not immediately obvious which hardware errata are worked around in
the Linux kernel for an arbitrary kernel tree, so add a file to keep
track of what we're working around.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

We drop __cpu_setup in .text.init, which ends up being part of .text.
The .text.init section was a legacy section name which has been unused
elsewhere for a long time.

The ".text.init" name is misleading if read as a synonym for
".init.text". Any CPU may execute __cpu_setup before turning the MMU on,
so it should simply live in .text.

Remove the pointless section assignment. This will leave __cpu_setup in
the .text section.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The arm64 asm/cmpxchg.h includes linux/mmdebug.h but doesn't so far as I
can tell actually use anything from it.  Removing the inclusion reduces
spurious header dependency rebuilds and also avoids issues with
recursive inclusions of headers causing build breaks due to attempts to
use things before they are defined if linux/mmdebug.h starts pulling in
more low level headers.

Such errors have happened in -next recently, for example:

In file included from include/linux/completion.h:11:0,
                 from include/linux/rcupdate.h:43,
                 from include/linux/tracepoint.h:19,
                 from include/linux/mmdebug.h:6,
                 from ./arch/arm64/include/asm/cmpxchg.h:22,
                 from ./arch/arm64/include/asm/atomic.h:41,
                 from include/linux/atomic.h:4,
                 from include/linux/spinlock.h:406,
                 from include/linux/seqlock.h:35,
                 from include/linux/time.h:5,
                 from include/uapi/linux/timex.h:56,
                 from include/linux/timex.h:56,
                 from include/linux/sched.h:19,
                 from arch/arm64/kernel/asm-offsets.c:21:
include/linux/wait.h: In function 'wait_on_atomic_t':
include/linux/wait.h:1218:2: error: implicit declaration of function 'atomic_read' [-Werror=implicit-function-declaration]
 if (atomic_read(val) == 0)
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Currently we treat the alternatives separately from other data that's
only used during initialisation, using separate .altinstructions and
.altinstr_replacement linker sections. These are freed for general
allocation separately from .init*. This is problematic as:

* We do not remove execute permissions, as we do for .init, leaving the
  memory executable.

* We pad between them, making the kernel Image bianry up to PAGE_SIZE
  bytes larger than necessary.

This patch moves the two sections into the contiguous region used for
.init*. This saves some memory, ensures that we remove execute
permissions, and allows us to remove some code made redundant by this
reorganisation.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Currently we place an ALIGN_DEBUG_RO between text and data for the .text
and .init sections, and depending on configuration each of these may
result in up to SECTION_SIZE bytes worth of padding (for
DEBUG_RODATA_ALIGN).

We make no distinction between the text and data in each of these
sections at any point when creating the initial page tables in head.S.
We also make no distinction when modifying the tables; __map_memblock,
fixup_executable, mark_rodata_ro, and fixup_init only work at section
granularity. Thus this padding is unnecessary.

For the spit between init text and data we impose a minimum alignment of
16 bytes, but this is also unnecessary. The init data is output
immediately after the padding before any symbols are defined, so this is
not required to keep a symbol for linker a section array correctly
associated with the data. Any objects within the section will be given
at least their usual alignment regardless.

This patch removes the redundant padding.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

As pgd_offset{,_k} shift the input address by PGDIR_SHIFT, the sub-page
bits will always be shifted out. There is no need to apply PAGE_MASK
before this.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jeremy Linton <jeremy.linton@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

On entry from el0, we save all the registers on the kernel stack, and
restore them before returning. x29 remains unchanged when we call out
to C code, which will store x29 as the frame-pointer on the stack.

Instead, write 0 into x29 after entry from el0, to avoid any risk of
tracing into user space.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

When unwind_frame() reaches the bottom of the irq_stack, the last fp
points to the original task stack. unwind_frame() uses
IRQ_STACK_TO_TASK_STACK() to find the sp value. If either values is
wrong, we may end up walking a corrupt stack.

Check these values are sane by testing if they are both on the stack
pointed to by current->stack.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

irq_stack is a per_cpu variable, that needs to be access from entry.S.
Use an assembler macro instead of the unreadable details.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

This refactors the EFI init and runtime code that will be shared
between arm64 and ARM so that it can be built for both archs.
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

This splits off the early EFI init and runtime code that
- discovers the EFI params and the memory map from the FDT, and installs
  the memblocks and config tables.
- prepares and installs the EFI page tables so that UEFI Runtime Services
  can be invoked at the virtual address installed by the stub.

This will allow it to be reused for 32-bit ARM.
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Change the EFI memory reservation logic to use memblock_mark_nomap()
rather than memblock_reserve() to mark UEFI reserved regions as
occupied. In addition to reserving them against allocations done by
memblock, this will also prevent them from being covered by the linear
mapping.
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Take the new memblock attribute MEMBLOCK_NOMAP into account when
deciding whether a certain region is or should be covered by the
kernel direct mapping.
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

This introduces the MEMBLOCK_NOMAP attribute and the required plumbing
to make it usable as an indicator that some parts of normal memory
should not be covered by the kernel direct mapping. It is up to the
arch to actually honor the attribute when laying out this mapping,
but the memblock code itself is modified to disregard these regions
for allocations and other general use.

Cc: linux-mm@kvack.org
Cc: Alexander Kuleshov <kuleshovmail@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Running with CONFIG_DEBUG_SPINLOCK=y can trigger a BUG with the new IRQ
stack code:

  BUG: spinlock lockup suspected on CPU#1

This is due to the IRQ_STACK_TO_TASK_STACK macro incorrectly retrieving
the task stack pointer stashed at the top of the IRQ stack.

Sayeth James:

| Yup, this is what is happening. Its an off-by-one due to broken
| thinking about how the stack works. My broken thinking was:
|
| >   top ------------
| >       | dummy_lr | <- irq_stack_ptr
| >       ------------
| >       |   x29    |
| >       ------------
| >       |   x19    | <- irq_stack_ptr - 0x10
| >       ------------
| >       |   xzr    |
| >       ------------
|
| But the stack-pointer is decreased before use. So it actually looks
| like this:
|
| >       ------------
| >       |          |  <- irq_stack_ptr
| >   top ------------
| >       | dummy_lr |
| >       ------------
| >       |   x29    | <- irq_stack_ptr - 0x10
| >       ------------
| >       |   x19    |
| >       ------------
| >       |   xzr    | <- irq_stack_ptr - 0x20
| >       ------------
|
| The value being used as the original stack is x29, which in all the
| tests is sp but without the current frames data, hence there are no
| missing frames in the output.
|
| Jungseok Lee picked it up with a 32bit user space because aarch32
| can't use x29, so it remains 0 forever. The fix he posted is correct.

This patch fixes the macro and adds some of this wisdom to a comment,
so that the layout of the IRQ stack is well understood.

Cc: James Morse <james.morse@arm.com>
Reported-by: Jungseok Lee <jungseoklee85@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

entry.S is modified to switch to the per_cpu irq_stack during el{0,1}_irq.
irq_count is used to detect recursive interrupts on the irq_stack, it is
updated late by do_softirq_own_stack(), when called on the irq_stack, before
__do_softirq() re-enables interrupts to process softirqs.

do_softirq_own_stack() is added by this patch, but does not yet switch
stack.

This patch adds the dummy stack frame and data needed by the previous
stack tracing patches.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

This patch allows unwind_frame() to traverse from interrupt stack to task
stack correctly. It requires data from a dummy stack frame, created
during irq_stack_entry(), added by a later patch.

A similar approach is taken to modify dump_backtrace(), which expects to
find struct pt_regs underneath any call to functions marked __exception.
When on an irq_stack, the struct pt_regs is stored on the old task stack,
the location of which is stored in the dummy stack frame.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
[james.morse: merged two patches, reworked for per_cpu irq_stacks, and
 no alignment guarantees, added irq_stack definitions]
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

There is need for figuring out how to manage struct thread_info data when
IRQ stack is introduced. struct thread_info information should be copied
to IRQ stack under the current thread_info calculation logic whenever
context switching is invoked. This is too expensive to keep supporting
the approach.

Instead, this patch pays attention to sp_el0 which is an unused scratch
register in EL1 context. sp_el0 utilization not only simplifies the
management, but also prevents text section size from being increased
largely due to static allocated IRQ stack as removing masking operation
using THREAD_SIZE in many places.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Make sure to clear out any ptrace singlestep state when a ptrace(2)
PTRACE_DETACH call is made on arm64 systems.

Otherwise, the previously ptraced task will die off with a SIGTRAP
signal if the debugger just previously singlestepped the ptraced task.

Cc: <stable@vger.kernel.org>
Signed-off-by: John Blackwood <john.blackwood@ccur.com>
[will: added comment to justify why this is in the arch code]
Signed-off-by: Will Deacon <will.deacon@arm.com>

When a kernel is built with CONFIG_TRACE_IRQFLAGS the following warning
is produced when entering userspace for the first time:

  WARNING: at /work/Linux/linux-2.6-aarch64/kernel/locking/lockdep.c:3519
  Modules linked in:
  CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc3+ #639
  Hardware name: Juno (DT)
  task: ffffffc9768a0000 ti: ffffffc9768a8000 task.ti: ffffffc9768a8000
  PC is at check_flags.part.22+0x19c/0x1a8
  LR is at check_flags.part.22+0x19c/0x1a8
  pc : [<ffffffc0000fba6c>] lr : [<ffffffc0000fba6c>] pstate: 600001c5
  sp : ffffffc9768abe10
  x29: ffffffc9768abe10 x28: ffffffc9768a8000
  x27: 0000000000000000 x26: 0000000000000001
  x25: 00000000000000a6 x24: ffffffc00064be6c
  x23: ffffffc0009f249e x22: ffffffc9768a0000
  x21: ffffffc97fea5480 x20: 00000000000001c0
  x19: ffffffc00169a000 x18: 0000005558cc7b58
  x17: 0000007fb78e3180 x16: 0000005558d2e238
  x15: ffffffffffffffff x14: 0ffffffffffffffd
  x13: 0000000000000008 x12: 0101010101010101
  x11: 7f7f7f7f7f7f7f7f x10: fefefefefefeff63
  x9 : 7f7f7f7f7f7f7f7f x8 : 6e655f7371726964
  x7 : 0000000000000001 x6 : ffffffc0001079c4
  x5 : 0000000000000000 x4 : 0000000000000001
  x3 : ffffffc001698438 x2 : 0000000000000000
  x1 : ffffffc9768a0000 x0 : 000000000000002e
  Call trace:
  [<ffffffc0000fba6c>] check_flags.part.22+0x19c/0x1a8
  [<ffffffc0000fc440>] lock_is_held+0x80/0x98
  [<ffffffc00064bafc>] __schedule+0x404/0x730
  [<ffffffc00064be6c>] schedule+0x44/0xb8
  [<ffffffc000085bb0>] ret_to_user+0x0/0x24
  possible reason: unannotated irqs-off.
  irq event stamp: 502169
  hardirqs last  enabled at (502169): [<ffffffc000085a98>] el0_irq_naked+0x1c/0x24
  hardirqs last disabled at (502167): [<ffffffc0000bb3bc>] __do_softirq+0x17c/0x298
  softirqs last  enabled at (502168): [<ffffffc0000bb43c>] __do_softirq+0x1fc/0x298
  softirqs last disabled at (502143): [<ffffffc0000bb830>] irq_exit+0xa0/0xf0

This happens because we disable interrupts in ret_to_user before calling
schedule() in work_resched. This patch adds the necessary
trace_hardirqs_off annotation.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

There is no need to worry about module and __init text disappearing
case, because that ftrace has a module notifier that is called when
a module is being unloaded and before the text goes away and this
code grabs the ftrace_lock mutex and removes the module functions
from the ftrace list, such that it will no longer do any
modifications to that module's text, the update to make functions
be traced or not is done under the ftrace_lock mutex as well.
And by now, __init section codes should not been modified
by ftrace, because it is black listed in recordmcount.c and
ignored by ftrace.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

For ftrace on arm64, kstop_machine which is hugely disruptive
to a running system is not needed to convert nops to ftrace calls
or back, because that to be modified instrucions, that NOP, B or BL,
are all safe instructions which called "concurrent modification
and execution of instructions", that can be executed by one
thread of execution as they are being modified by another thread
of execution without requiring explicit synchronization.
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Boqun Feng reported a rather nasty ordering issue with spin_unlock_wait
on architectures implementing spin_lock with LL/SC sequences and acquire
semantics:

 | CPU 1                   CPU 2                     CPU 3
 | ==================      ====================      ==============
 |                                                   spin_unlock(&lock);
 |                         spin_lock(&lock):
 |                           r1 = *lock; // r1 == 0;
 |                         o = READ_ONCE(object); // reordered here
 | object = NULL;
 | smp_mb();
 | spin_unlock_wait(&lock);
 |                           *lock = 1;
 | smp_mb();
 | o->dead = true;
 |                         if (o) // true
 |                           BUG_ON(o->dead); // true!!

The crux of the problem is that spin_unlock_wait(&lock) can return on
CPU 1 whilst CPU 2 is in the process of taking the lock. This can be
resolved by upgrading spin_unlock_wait to a LOCK operation, forcing it
to serialise against a concurrent locker and giving it acquire semantics
in the process (although it is not at all clear whether this is needed -
different callers seem to assume different things about the barrier
semantics and architectures are similarly disjoint in their
implementations of the macro).

This patch implements spin_unlock_wait using an LL/SC sequence with
acquire semantics on arm64. For v8.1 systems with the LSE atomics, the
exclusive writeback is omitted, since the spin_lock operation is
indivisible and no intermediate state can be observed.
Signed-off-by: Will Deacon <will.deacon@arm.com>

arm64 relies on the arm_arch_timer for sched_clock, so we can select
HAVE_IRQ_TIME_ACCOUNTING and have the core sched-clock code enable the
feature at runtime based on the rate.
Reported-by: Mario Smarduch <m.smarduch@samsung.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

ARM glibc uses (4 * __getpagesize()) for SHMLBA, which is correct for
4KB pages and works fine for 64KB pages, but the kernel uses a hardcoded
16KB that is too small for 64KB page based kernels. This changes the
definition to what user space sees when using 64KB pages.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

These functions/variables are not needed after booting, so mark them
as __init or __initdata.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

This patch implements the pte_accessible() macro, which can be used to
test whether or not a given pte is a candidate for allocation in the
TLB.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Callees of __create_mapping may decide to create section mappings if
sufficient low bits of the physical and virtual addresses they were
passed are zero. While __create_mapping rounds the virtual base address
down, it does not similarly round the physical base address down, and
hence non-zero bits in the physical address can prevent use of a section
mapping, even where a whole next-level table would be used instead.

Round down the physical base address in __create_mapping to enable all
callees to always create section mappings when such a mapping is
possible.

Cc: Laura Abbott <labbott@fedoraproject.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

If a caller of __create_mapping provides a PA and VA which have
different sub-page offsets, it is not clear which offset they expect to
apply to the mapping, and is indicative of a bad caller.

In some cases, the region we wish to map may validly have a sub-page
offset in the physical and virtual addresses. For example, EFI runtime
regions have 4K granularity, yet may be mapped by a 64K page kernel. So
long as the physical and virtual offsets are the same, the region will
be mapped at the expected VAs.

Disallow calls with differing sub-page offsets, and WARN when they are
encountered, so that we can detect and fix such cases.

Cc: Laura Abbott <labbott@fedoraproject.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Pull nouveau and radeon fixes from Dave Airlie:
 "Just some nouveau and radeon/amdgpu fixes.

  The nouveau fixes look large as the firmware context files are
  regenerated, but the actual change is quite small"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: make some dpm errors debug only
  drm/nouveau/volt/pwm/gk104: fix an off-by-one resulting in the voltage not being set
  drm/nouveau/nvif: allow userspace access to its own client object
  drm/nouveau/gr/gf100-: fix oops when calling zbc methods
  drm/nouveau/gr/gf117-: assume no PPC if NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK is zero
  drm/nouveau/gr/gf117-: read NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK from correct GPC
  drm/nouveau/gr/gf100-: split out per-gpc address calculation macro
  drm/nouveau/bios: return actual size of the buffer retrieved via _ROM
  drm/nouveau/instmem: protect instobj list with a spinlock
  drm/nouveau/pci: enable c800 magic for some unknown Samsung laptop
  drm/nouveau/pci: enable c800 magic for Clevo P157SM
  drm/radeon: make rv770_set_sw_state failures non-fatal
  drm/amdgpu: move dependency handling out of atomic section v2
  drm/amdgpu: optimize scheduler fence handling
  drm/amdgpu: remove vm->mutex
  drm/amdgpu: add mutex for ba_va->valids/invalids
  drm/amdgpu: adapt vce session create interface changes
  drm/amdgpu: vce use multiple cache surface starting from stoney
  drm/amdgpu: reset vce trap interrupt flag

Pull RTC fixes from Alexandre Belloni:
 "Two fixes for the ds1307 alarm and wakeup"

* tag 'rtc-4.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: ds1307: fix alarm reading at probe time
  rtc: ds1307: fix kernel splat due to wakeup irq handling

Pull MIPS fix from Ralf Baechle:
 "Just a fix for empty loops that may be removed by non-antique GCC"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Fix delay loops which may be removed by GCC.

Pull m68k fixes from Geert Uytterhoeven:
 "Summary:

   - Add missing initialization of max_pfn, which is needed to make
     selftests/vm/mlock2-tests succeed,

   - Wire up new mlock2 syscall"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Wire up mlock2
  m68knommu: Add missing initialization of max_pfn and {min,max}_low_pfn
  m68k/mm: sun3 - Add missing initialization of max_pfn and {min,max}_low_pfn
  m68k/mm: m54xx - Add missing initialization of max_pfn
  m68k/mm: motorola - Add missing initialization of max_pfn