- 26 Jul, 2013 2 commits
-
-
Alexander Shiyan authored
The data pointer should point to DT data, and not to the ID array. Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
John Sheu authored
The video encode/decode paths have duplicated logic between VIDIOC_TRY_FMT and VIDIOC_S_FMT that should be de-duped. Also, video decode reports V4L2_PIX_FMT_NV12MT_16X16 output format, regardless of what the actual output has been set at. Fix this. Signed-off-by:
John Sheu <sheu@google.com> Signed-off-by:
-
- 08 Jul, 2013 1 commit
-
-
Mauro Carvalho Chehab authored
As mchehab@redhat.com is no longer valid, update it to reflect the new one. Signed-off-by:
-
- 05 Jul, 2013 1 commit
-
-
Mauro Carvalho Chehab authored
According with Manu Abraham, stb0899 seek algorithm is broken for symbol rates bellow to 5Mbauds. So, revert those patches: 55b3318b [media] stb0899: allow minimum symbol rate of 2000000 2eeed77f [media] stb0899: allow minimum symbol rate of 1000000 Requested-by:
Manu Abraham <abraham.manu@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 28 Jun, 2013 30 commits
-
-
Sylwester Nawrocki authored
Ensure the colorspace is properly adjusted by the driver for YUV and Bayer image formats. The subdev try_fmt helper is simplified. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Ensure there are valid initial image formats on the FIMC.n subdev pads. Signed-off-by:
-
Sylwester Nawrocki authored
Ensure there is a valid initial resolution and pixel format set at the FIMC-IS-ISP subdev pads. Signed-off-by:
-
Sylwester Nawrocki authored
Ensure TRY formats are propagated from the sink pad to the source pads of the FIMC-IS-ISP subdev and the TRY and ACTIVE formats are separated. [mchehab@redhat.com: Whitespace cleanup] Signed-off-by:
Kyungmin Park <kyungin.park@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Ensure the image resolution and crop rectangle on the FIMC-LITE.n subdevs and fimc-lite.n.capture video nodes is properly configured upon the driver's initialization. Signed-off-by:
-
Sylwester Nawrocki authored
FIMC-LITE subdevs have one sink pad and two source pads on which the image formats are always same. This patch implements missing format propagation from the sink pad to the source pads, to allow user space to negotiate TRY format on whole media pipeline involving FIMC-LITE.n subdevs. The subdev try_fmt helper is simplified. Signed-off-by:
Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
This change is mainly to update the driver's path changed from drivers/media/platform/s5p-fimc to drivers/media/platform/exynos4-is/. While at it, remove non-existent files rule, move the whole entry to the Samsung drivers section and add the patch tracking system site URL. Signed-off-by:
-
Sylwester Nawrocki authored
Update the documentation with the driver's path changed in commit 56fa1a6a [media] s5p-fimc: Change the driver directory to exynos4-is Signed-off-by:
-
Sylwester Nawrocki authored
This patch changes the firmware file names of the FIMC-IS subsystem. It is needed since there are different firmwares used across various SoC series, e.g. Exynos4 and Exynos5. Also the sensor specific "setfile" name is changed, to account for it depends on an image sensor and is also specific to the FIMC-IS and the SoC. This is a change for a driver merged in 3.10. Signed-off-by:
-
Sylwester Nawrocki authored
Add compatible property for the Exynos5250 and enable the frame start and frame end interrupts. These interrupts are needed for the Exynos5 FIMC-IS firmware. The driver enables those interrupt only where available, depending on the 'compatible' property. This can be optimized further, by exposing some API at the subdev driver, so the host driver can enable extra interrupts only for the image processing chains involving FIMC-IS. Signed-off-by:
Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds support for the Exynos5250 SoC variant of the FIMC-LITE IP. A 'compatible' string is added for Exynos5250 compatible devices and the capture DMA handling is reworked to use the FLITE_REG_CIFCNTSEQ register, masking output DMA buffer address slots. The frame interrupt is enabled so there are now 2 interrupts per frame. This likely can be optimized in future by using any status registers that allow to figure out what the last and the currently written frame buffer is. It would also be more reliable in cases where there are high interrupt service latencies. Signed-off-by:
Arun Kumar K <arun.kk@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
The FIMC-LITE IP block is available only on platforms instantiated from device tree. Signed-off-by:
-
Lad, Prabhakar authored
This patch removes manual setting of subdev name in the probe, ideally subdev names must be unique. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Lad, Prabhakar authored
This patch removes manual setting of subdev name in the probe, ideally subdev names must be unique. Signed-off-by:
-
Hans Verkuil authored
The m2m-deinterlace, mem2mem_testdev and mx2_emmaprp drivers didn't set the v4l2_dev pointer in struct video_device, even though a v4l2_device was registered correctly. These days this v4l2_dev pointer must be set correctly, so this patch adds that for these three drivers. Signed-off-by:
-
Hans Verkuil authored
This struct is now required for all video device nodes, but it was missing in this driver. Signed-off-by:
-
Lars-Peter Clausen authored
client->driver->id_table will always point to the first entry in the device id table. So all devices will use the same init sequence. Use the id table entry that gets passed to the driver's probe() function to get the right init sequence. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
-
Emil Goode authored
Adding a __user annotation fixes the following sparse warnings. drivers/media/pci/saa7134/saa7134-video.c:1578:45: warning: incorrect type in initializer (different address spaces) drivers/media/pci/saa7134/saa7134-video.c:1578:45: expected struct v4l2_clip *clips drivers/media/pci/saa7134/saa7134-video.c:1578:45: got struct v4l2_clip [noderef] <asn:1>*clips drivers/media/pci/saa7134/saa7134-video.c:1589:26: warning: incorrect type in assignment (different address spaces) drivers/media/pci/saa7134/saa7134-video.c:1589:26: expected struct v4l2_clip [noderef] <asn:1>*clips drivers/media/pci/saa7134/saa7134-video.c:1589:26: got struct v4l2_clip *clips Signed-off-by:Emil Goode <emilgoode@gmail.com> Signed-off-by:
-
Hans Verkuil authored
build/media_build/v4l/saa7164-core.c: In function 'saa7164_initdev': build/media_build/v4l/saa7164-core.c:1192:6: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] int err, i; ^ Signed-off-by: -
Hans Verkuil authored
The comment for the FM_RX class was copied from the DV class unchanged. Fixed. Also made the FM_TX comment consistent with the others. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
media-git/drivers/media/platform/omap/omap_vout.c: In function ‘omapvid_init’: media-git/drivers/media/platform/omap/omap_vout.c:382:17: warning: ‘mode’ may be used uninitialized in this function [-Wmaybe-uninitialized] vout->dss_mode = video_mode_to_dss_mode(vout); ^ media-git/drivers/media/platform/omap/omap_vout.c:332:23: note: ‘mode’ was declared here enum omap_color_mode mode; ^ Signed-off-by: -
Hans Verkuil authored
media-git/drivers/media/platform/blackfin/bfin_capture.c: In function ‘bcap_probe’: media-git/drivers/media/platform/blackfin/bfin_capture.c:1007:16: warning: ignoring return value of ‘vb2_queue_init’, declared with attribute warn_unused_result [-Wunused-result] vb2_queue_init(q); ^ Signed-off-by:Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
-
Hans Verkuil authored
build/media_build/v4l/ml86v7667.c: In function 'ml86v7667_s_ctrl': build/media_build/v4l/ml86v7667.c:120:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret = 0; ^ Signed-off-by: -
Guennadi Liakhovetski authored
The scaling / cropping library, that has been extracted from the CEU driver still contained a couple of references to the original hardware. Clean them up. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
The sh_mobile_ceu_camera driver implements a generic algorithm for setting up an optimal client and host scaling and cropping configuration. This patch makes those functions available for all drivers. Signed-off-by:
-
Guennadi Liakhovetski authored
Several functions in the sh_mobile_ceu_camera driver implement generic algorithms and can be re-used by other V4L2 camera host drivers too. These functions attempt to optimise scaling and cropping functions of the subdevice, e.g. a camera sensor. This patch makes those functions generic for future re-use by other camera host drivers. Signed-off-by:
-
Guennadi Liakhovetski authored
Add documentation for the V4L2 clock and V4L2 asynchronous probing APIs to v4l2-framework.txt. Signed-off-by:
-
Guennadi Liakhovetski authored
In scan_async_group() if the size parameter is negative, the sasd pointer will be used uninitialised: drivers/media/platform/soc_camera/soc_camera.c: In function "soc_camera_host_register": drivers/media/platform/soc_camera/soc_camera.c:1514:55: warning: "sasd" may be used uninitialized in this function [-Wmaybe-uninitialized] sasd->asd.match.i2c.adapter_id, sasd->asd.match.i2c.address); ^ drivers/media/platform/soc_camera/soc_camera.c:1464:34: note: "sasd" was declared here struct soc_camera_async_subdev *sasd; Fix this by making "size" and the array, from which it is assigned unsigned. Signed-off-by: -
Guennadi Liakhovetski authored
i2c_verify_client() is only available, if I2C is enabled. Fix v4l2-async.c compilation if I2C is disabled. Signed-off-by:
-
Guennadi Liakhovetski authored
The sh_vou driver needs CONFIG_I2C or CONFIG_I2C_MODULE to build, add the respective dependency. Signed-off-by:
-
- 25 Jun, 2013 2 commits
-
-
Mauro Carvalho Chehab authored
* v4l_for_linus: [media] Fix build when drivers are builtin and frontend modules [media] s5p makefiles: don't override other selections on obj-[ym] [media] exynos4-is: Fix FIMC-IS clocks initialization [media] rtl28xxu: fix buffer overflow when probing Rafael Micro r820t tuner Signed-off-by: -
Laurent Pinchart authored
The uvcvideo driver lost its dependency on VIDEO_V4L2 during the big media directory reorganization. Add it back. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
- 21 Jun, 2013 4 commits
-
-
Guennadi Liakhovetski authored
Both synchronous and asynchronous imx074 subdevice probing is supported by this patch. Signed-off-by:
-
Guennadi Liakhovetski authored
Use the v4l2-async API to support asynchronous subdevice probing, including the CSI2 subdevice. Synchronous probing is still supported too. Signed-off-by:
-
Guennadi Liakhovetski authored
Add support for asynchronous subdevice probing, using the v4l2-async API. The legacy synchronous mode is still supported too, which allows to gradually update drivers and platforms. The selected approach adds a notifier for each struct soc_camera_device instance, i.e. for each video device node, even when there are multiple such instances registered with a single soc-camera host simultaneously. Signed-off-by:
-
Guennadi Liakhovetski authored
Instead of centrally enabling and disabling subdevice master clocks in soc-camera core, let subdevice drivers do that themselves, using the V4L2 clock API and soc-camera convenience wrappers. Signed-off-by:
-
