- 20 Oct, 2004 40 commits
-
-
Dinakar Guniguntala authored
/proc shows the wrong PID as parent in the following case Process A creates Threads 1 & 2 (using pthread_create) Thread 2 then forks and execs process B getppid() for Process B shows Process A (rightly) as parent, however /proc/B/status shows Thread 3 as PPid (incorrect). Signed-off-by:
Dinakar Guniguntala <dino@in.ibm.com> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Adrian Bunk authored
There's no reason to directly #include <asm/bitops.h> since it's available on all architectures and also included by #include <linux/bitops.h>. This patch changes #include <asm/bitops.h> to #include <linux/bitops.h>. Signed-off-by:
-
Dave Hansen authored
I don't know what this is trying to do. It might be some kind of artifact from when get_pgd_slow() was removed. The expanded expression with __pa() ends up looking something like this: (unsigned long)(u64)(u32)pmd-PAGE_OFFSET and that is just nutty because pmd is a pointer now, anyway. Attached patch removes the casts. Signed-off-by:
Dave Hansen <haveblue@us.ibm.com> Signed-off-by:
-
Paolo \'Blaisorblade\' Giarrusso authored
Use, in the rb_entry definition, the container_of macro instead of reinventing the wheel; compared to using offset_of() as I did in the prev. version, it has type safety checking. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade_spam@yahoo.it> Signed-off-by:
-
Pavel Machek authored
Overwrite __init section so calls to __init functions from normal code are caught, reliably. (Plus a fix from Dave Hansen) Signed-off-by:
-
Andrew Morton authored
remove unneeded preempt_disable/enable. pte_offset_map/unmap already does that. Signed-off-by:
-
Jesper Juhl authored
Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
-
Matt Domsch authored
Separate the module source and header checksum into a separate modinfo field srcversion. With CONFIG_MODULE_SRCVERSION_ALL=y, put srcversion into every module, not just those with MODULE_VERSION("something"). Patch by Rusty Russell, trivial merging and testing by Matt Domsch Signed-off-by:Matt Domsch <Matt_Domsch@dell.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Matt Domsch authored
Below is a patch to suppress printing uninformative errors from ide-floppy.c in response to commands to floppy drives in which no media is present. Without this patch, commands sent to ide-floppy devices without media inserted cause error messages on the console (KERN_ERR level) such as: ide-floppy: ide: I/O error, pc = 0 key = 2, asc = 3a asq = 0 ide-floppy: ide: I/O error, pc = 1b key = 2, asc = 3a asq = 0 ide-floppy: ide: I/O error, pc = 23 key = 2, asc = 3a asq = 0 ide-floppy: ide: I/O error, pc = 1e key = 2, asc = 3a asq = 0 ide-floppy: ide: I/O error, pc = 1e key = 2, asc = 3a asq = 0 Dell's Virtual Floppy (system management presents to the local system an IDE floppy device, which is actually a floppy device in a remote system connected over an IP link) exhibits this also, when connecting to a remote floppy drive with no media present. Signed-off-by:
-
Colin Leroy authored
This one fixes another unitialized var warning (which is harmless, but whatever). Signed-off-by:
Colin Leroy <colin@colino.net> Signed-off-by:
-
Hideo Aoki authored
In Documentation/filesystems/proc.txt, explanation of /proc/meminfo is described in section 1.3 (IDE devices in /proc/ide). I think that it should be described in section 1.2 (Kernel data). Signed-off-by:
Hideo Aoki <aoki@sdl.hitachi.co.jp> Signed-off-by:
-
Hideo Aoki authored
This patch adds "swap_token_timeout" parameter in /proc/sys/vm. The parameter means expired time of token. Unit of the value is HZ, and the default value is the same as current SWAP_TOKEN_TIMEOUT (i.e. HZ * 300). Signed-off-by:
-
Matt Domsch authored
Some controller BIOSes have problems with the legacy int13 fn02 READ SECTORS command. int13 fn42 EXTENDED READ is used in preference by most boot loaders today, so lets use that. If EXTENDED READ fails or isn't supported, fall back to READ SECTORS. This hopefully resolves the three reports of BIOSes which would either long-pause (30+ seconds) or hang completely on the legacy READ SECTORS command. This also adds CONFIG_EDD_SKIP_MBR to eliminate reading the MBR on each BIOS-presented disk, in case there are further problems in this area. Signed-off-by:
-
Ryan S. Arnold authored
This patch prevents execution of hvc_write() and hvc_hangup() after the tty layer has executed a final hvc_close() against a device. This patch provides a better method than was previously used. tty->driver_data is no longer invalidated so we'll no longer get oopses when the tty layer allows late hangup() and write() operations. - Removed silly tty->driver_data = NULL; from hvc_close which prevents possible oops in hvc_write() and hvc_hangup() due to improperly acting ldisc close ordering. - Added hp->count <= 0 check to hvc_write() and hvc_hangup() to prevent execution of these function after hvc_close() has been invoked by the tty layer. Same tty ldisc issues as above are the reason. - Added some comments to clarify the situation. - Awaiting a forth coming patch from Alan Cox which should clean up the close ordering and prevent the late hangup and write ops from happening. Signed-off-by:
Ryan S. Arnold <rsa@us.ibm.com> Signed-off-by:
-
Yoichi Yuasa authored
This patch had added missing definition and had fixed typo for VRC4173. Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by:
-
Ed Schouten authored
print a couple of ipv4 addresses as dotted quads, not as hex. Signed-off-by:
-
Olaf Hering authored
I'm not sure why these defines and typedefs exists, the driver compiles fine without it. Signed-off-by:
Olaf Hering <olh@suse.de> Signed-off-by:
-
Duncan Sands authored
The error exit path in request_firmware frees the allocated struct firmware *firmware, which is good. What is not so good is that the value of firmware has already been copied out to the caller as *firmware_p. The risk is that the caller will pass this to release_firmware, a double free. This is exactly what will happen if the caller copied the example code if(request_firmware(&fw_entry, $FIRMWARE, device) == 0) copy_fw_to_device(fw_entry->data, fw_entry->size); release(fw_entry); from the firmware documentation. Signed-off-by: -
Geert Uytterhoeven authored
Amiga frame buffer: We used to have a local hack in fbmem.c to always call the fbdev setup() routines, even when an fbdev was explicitly disabled on the kernel command line (video=xxx:off). This allowed amifb to suspend the monitor, but program the sync generator of the video controller in Denise/Lisa to a 31 kHz/70 Hz mode, increasing the maximum audio playback frequency. Thanks to the recently introduced fb_get_options() routine, we can kill the local hack and just use the return value of fb_get_options(). Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
A few more NULL vs. 0 cleanups, as detected by sparse. Signed-off-by:
-
Geert Uytterhoeven authored
Kill remainings of the DMI Resolver support code that got removed somewhere between 2.0 and 2.2. Signed-off-by:
-
Geert Uytterhoeven authored
Amiga frame buffer: The new convention (introduced in 2.6.9-rc1) requires that the usable color depth for pseudocolor visuals is indicated by the lengths of the color bitfields. Update amifb for this convention, and add a special case for HAM (Hold-and-Modify) mode (colormap has 16 (HAM6) or 64 (HAM8) entries). Signed-off-by:
-
Geert Uytterhoeven authored
Recent versions of ld add an empty stack program header to the kernel image, which makes it incompatible with current m68k bootstrap loaders. Modify the linker script to make sure we see only the program headers that are really needed. (from Roman Zippel) Signed-off-by:
-
Geert Uytterhoeven authored
M68k PCI: Removes unnecessary min/max macros and change calls to use kernel.h macros instead. Signed-off-by:
Michael Veeck <michael.veeck@gmx.net> Signed-off-by:
Maximilian Attems <janitor@sternwelten.at> Signed-off-by:
-
Geert Uytterhoeven authored
Atari ACSI: Correct a small problem in the dependencies of ATARI_BIONET and ATARI_PAMSNET (e.g. ATARI_ACSI=m shouldn't allow ATARI_BIONET=y). Signed-off-by:
Adrian Bunk <bunk@fs.tum.de> Signed-off-by:
-
Geert Uytterhoeven authored
Fix off-by-one error in zone size calculation (from Didier Mequignon and Petr Stehlik) Signed-off-by:
-
Maximilian Attems authored
hch send in a patch to remove MOD_{DEC,INC}_USE_COUNT. Let's also remove useless references to it (comments, old ifdefs). Signed-off-by: -
Oleg Nesterov authored
{set,clear}_child_tid initialized in copy_process() right after return from copy_thread(). These vars are not used in cleanup path if copy_thread() fails. grep -r _child_tid arch/ shows only ia64/kernel/asm-offsets.c, so i blindly patched non i386 archs too. Signed-off-by:Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Venkatesh Pallipadi authored
phys_proc_id gets initialized only when (smp_num_siblings > 1). But gets printed even when (smp_num_siblings == 1). As a result we print incorrect physical processor id in /proc/cpuinfo, when HT is disabled. Signed-off-by:
: "Venkatesh Pallipadi" <venkatesh.pallipadi@intel.com> Signed-off-by:
-
Christoph Hellwig authored
<linux/irq.h> is internals for the generic irq handler implementation, which is used on most but not all platforms. Signed-off-by:
-
Oleg Nesterov authored
Now there is no point in calling costly find_pid(type) if __detach_pid(type) returned non zero value. Acked-By:
Kirill Korotaev <dev@sw.ru> Signed-off-by:
-
Oleg Nesterov authored
Kirill's kernel/pid.c rework broke optimization logic in detach_pid(). Non zero return from __detach_pid() was used to indicate, that this pid can probably be freed. Current version always (modulo idle threads) return non zero value, thus resulting in unneccesary pid_hash scanning. Also, uninlining __detach_pid() reduces pid.o text size from 2492 to 1600 bytes. Acked-By:
-
Christoph Lameter authored
* Add CLOCK_SGI_CYCLE provided by drivers/char/mmtimer Signed-off-by:
-
Christoph Lameter authored
POSIX clocks are to be implemented in the following way according to V3 of the Single Unix Specification: 1. CLOCK_PROCESS_CPUTIME_ID Implementations shall also support the special clockid_t value CLOCK_PROCESS_CPUTIME_ID, which represents the CPU-time clock of the calling process when invoking one of the clock_*() or timer_*() functions. For these clock IDs, the values returned by clock_gettime() and specified by clock_settime() represent the amount of execution time of the process associated with the clock. 2. CLOCK_THREAD_CPUTIME_ID Implementations shall also support the special clockid_t value CLOCK_THREAD_CPUTIME_ID, which represents the CPU-time clock of the calling thread when invoking one of the clock_*() or timer_*() functions. For these clock IDs, the values returned by clock_gettime() and specified by clock_settime() shall represent the amount of execution time of the thread associated with the clock. These times mentioned are CPU processing times and not the time that has passed since the startup of a process. Glibc currently provides its own implementation of these two clocks which is designed to return the time that passed since the startup of a process or a thread. Moreover Glibc's clocks are bound to CPU timers which is problematic when the frequency of the clock changes or the process is moved to a different processor whose cpu timer may not be fully synchronized to the cpu timer of the current CPU. This patchset results in a both clocks working reliably. The patch also implements the access to other the thread and process clocks of linux processes by using negative clockid's: 1. For CLOCK_PROCESS_CPUTIME_ID: -pid 2. For CLOCK_THREAD_CPUTIME_ID: -(pid + PID_MAX_LIMIT) This allows clock_getcpuclockid(pid) to return -pid and pthread_getcpuiclock(pid) to return -(pid + PID_MAX_LIMIT) to allow access to the corresponding clocks. Todo: - The timer API to generate events by a non tick based timer is not usable in its current state. The posix timer API seems to be only useful at this point to define clock_get/set. Need to revise this. - Implement timed interrupts in mmtimer after API is revised. The mmtimer patch is unchanged from V6 and stays as is in 2.6.9-rc3-mm2. But I expect to update the driver as soon as the interface to setup hardware timer interrupts is usable. Single Thread Testing CLOCK_THREAD_CPUTIME_ID= 0.494140878 resolution= 0.000976563 CLOCK_PROCESS_CPUTIME_ID= 0.494140878 resolution= 0.000976563 Multi Thread Testing Starting Thread: 0 1 2 3 4 5 6 7 8 9 Joining Thread: 0 1 2 3 4 5 6 7 8 9 0 Cycles= 0 Thread= 0.000000000ns Process= 0.495117441ns 1 Cycles=1000000 Thread= 0.140625072ns Process= 2.523438792ns 2 Cycles=2000000 Thread= 0.966797370ns Process= 8.512699671ns 3 Cycles=3000000 Thread= 0.806641038ns Process= 7.561527309ns 4 Cycles=4000000 Thread= 1.865235330ns Process= 12.891608163ns 5 Cycles=5000000 Thread= 1.604493009ns Process= 11.528326215ns 6 Cycles=6000000 Thread= 2.086915131ns Process= 13.500983475ns 7 Cycles=7000000 Thread= 2.245118337ns Process= 13.947272766ns 8 Cycles=8000000 Thread= 1.604493009ns Process= 12.252935961ns 9 Cycles=9000000 Thread= 2.160157356ns Process= 13.977546219ns Clock status at the end of the timer tests: Gettimeofday() = 1097084999.489938000 CLOCK_REALTIME= 1097084999.490116229 resolution= 0.000000040 CLOCK_MONOTONIC= 177.071675109 resolution= 0.000000040 CLOCK_PROCESS_CPUTIME_ID= 13.978522782 resolution= 0.000976563 CLOCK_THREAD_CPUTIME_ID= 0.497070567 resolution= 0.000976563 CLOCK_SGI_CYCLE= 229.967982280 resolution= 0.000000040 PROCESS clock of 1 (init)= 4.833986850 resolution= 0.000976563 THREAD clock of 1 (init)= 0.009765630 resolution= 0.000976563 Signed-off-by: -
Frank Hirtz authored
The following patch will have the committed memory limit (per the current overcommit ratio) and the amount of memory remaining under this limit displayed in meminfo. It's presently somewhat difficult to use the strict memory overcommit settings as it's somewhat difficult to determine the amount of memory remaining under the cap. This patch would make using strict overcommit a good bit simpler. Signed-off-by:
-
Stephen Hemminger authored
A couple chrdev routines take a constant string and should be declared with const char *. Signed-off-by:
-
Michael A. Halcrow authored
This patch includes documentation on using the BSD Secure Levels LSM. Signed-off-by:
Michael A. Halcrow <mahalcro@us.ibm.com> Signed-off-by:
-
Michael A. Halcrow authored
This patch modifies Kconfig and Makefile to support building the BSD Secure Levels LSM, in addition to the module itself. Signed-off-by:
-
Michael A. Halcrow authored
I have received positive feedback from various individuals who have applied my BSD Secure Levels LSM patch, and so at this point I am submitting it to you with a request to merge it in. Nothing has changed in this patch since when I last posted it to the LKML, so I am not re-sending it there. This first patch adds hooks to catch attempts to set the system clock back. Signed-off-by:
-
Roland McGrath authored
I don't know why struct k_itimer was ever declared in sched.h; perhaps at one time it was referenced by something else there. There is no need for it now. This patch moves the struct where it belongs, in linux/posix-timers.h. It has zero effect on anything except keeping the source easier to read. Signed-off-by:
-
