1. 09 Aug, 2019 9 commits
  2. 08 Aug, 2019 1 commit
  3. 07 Aug, 2019 2 commits
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 13dfb3fa
      David S. Miller authored
      Just minor overlapping changes in the conflicts here.
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      13dfb3fa
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 33920f1e
      Linus Torvalds authored
      Pull networking fixes from David Miller:
       "Yeah I should have sent a pull request last week, so there is a lot
        more here than usual:
      
         1) Fix memory leak in ebtables compat code, from Wenwen Wang.
      
         2) Several kTLS bug fixes from Jakub Kicinski (circular close on
            disconnect etc.)
      
         3) Force slave speed check on link state recovery in bonding 802.3ad
            mode, from Thomas Falcon.
      
         4) Clear RX descriptor bits before assigning buffers to them in
            stmmac, from Jose Abreu.
      
         5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF
            loops, from Nishka Dasgupta.
      
         6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean.
      
         7) Need to hold sock across skb->destructor invocation, from Cong
            Wang.
      
         8) IP header length needs to be validated in ipip tunnel xmit, from
            Haishuang Yan.
      
         9) Use after free in ip6 tunnel driver, also from Haishuang Yan.
      
        10) Do not use MSI interrupts on r8169 chips before RTL8168d, from
            Heiner Kallweit.
      
        11) Upon bridge device init failure, we need to delete the local fdb.
            From Nikolay Aleksandrov.
      
        12) Handle erros from of_get_mac_address() properly in stmmac, from
            Martin Blumenstingl.
      
        13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef
            Kadlecsik.
      
        14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with
            some devices, so revert. From Johannes Berg.
      
        15) Fix deadlock in rxrpc, from David Howells.
      
        16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue
            Haibing.
      
        17) Fix mvpp2 crash on module removal, from Matteo Croce.
      
        18) Fix race in genphy_update_link, from Heiner Kallweit.
      
        19) bpf_xdp_adjust_head() stopped working with generic XDP when we
            fixes generic XDP to support stacked devices properly, fix from
            Jesper Dangaard Brouer.
      
        20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from
            David Ahern.
      
        21) Several memory leaks in new sja1105 driver, from Vladimir Oltean"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits)
        net: dsa: sja1105: Fix memory leak on meta state machine error path
        net: dsa: sja1105: Fix memory leak on meta state machine normal path
        net: dsa: sja1105: Really fix panic on unregistering PTP clock
        net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well
        net: dsa: sja1105: Fix broken learning with vlan_filtering disabled
        net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus()
        net: sched: sample: allow accessing psample_group with rtnl
        net: sched: police: allow accessing police->params with rtnl
        net: hisilicon: Fix dma_map_single failed on arm64
        net: hisilicon: fix hip04-xmit never return TX_BUSY
        net: hisilicon: make hip04_tx_reclaim non-reentrant
        tc-testing: updated vlan action tests with batch create/delete
        net sched: update vlan action for batched events operations
        net: stmmac: tc: Do not return a fragment entry
        net: stmmac: Fix issues when number of Queues >= 4
        net: stmmac: xgmac: Fix XGMAC selftests
        be2net: disable bh with spin_lock in be_process_mcc
        net: cxgb3_main: Fix a resource leak in a error path in 'init_one()'
        net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs
        net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER
        ...
      33920f1e
  4. 06 Aug, 2019 28 commits
    • David S. Miller's avatar
      Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue · 05bb5203
      David S. Miller authored
      Jeff Kirsher says:
      
      ====================
      40GbE Intel Wired LAN Driver Updates 2019-08-05
      
      This series contains updates to i40e driver only.
      
      Dmitrii adds missing statistic counters for VEB and VEB TC's.
      
      Slawomir adds support for logging the "Disable Firmware LLDP" flag
      option and its current status.
      
      Jake fixes an issue where VF's being notified of their link status
      before their queues are enabled which was causing issues.  So always
      report link status down when the VF queues are not enabled.  Also adds
      future proofing when statistics are added or removed by adding checks to
      ensure the data pointer for the strings lines up with the expected
      statistics count.
      
      Czeslaw fixes the advertised mode reported in ethtool for FEC, where the
      "None BaseR RS" was always being displayed no matter what the mode it
      was in.  Also added logging information when the PF is entering or
      leaving "allmulti" (or promiscuous) mode.  Fixed up the logging logic
      for VF's when leaving multicast mode to not include unicast as well.
      
      v2: drop Aleksandr's patch (previously patch #2 in the series) to
          display the VF MAC address that is set by the VF while community
          feedback is addressed.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      05bb5203
    • Yifeng Sun's avatar
      openvswitch: Print error when ovs_execute_actions() fails · aa733660
      Yifeng Sun authored
      Currently in function ovs_dp_process_packet(), return values of
      ovs_execute_actions() are silently discarded. This patch prints out
      an debug message when error happens so as to provide helpful hints
      for debugging.
      Acked-by: default avatarPravin B Shelar <pshelar@ovn.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      aa733660
    • David S. Miller's avatar
      Merge branch 'sja1105-fixes' · feac1d68
      David S. Miller authored
      Vladimir Oltean says:
      
      ====================
      Fixes for SJA1105 DSA: FDBs, Learning and PTP
      
      This is an assortment of functional fixes for the sja1105 switch driver
      targeted for the "net" tree (although they apply on net-next just as
      well).
      
      Patch 1/5 ("net: dsa: sja1105: Fix broken learning with vlan_filtering
      disabled") repairs a breakage introduced in the early development stages
      of the driver: support for traffic from the CPU has broken "normal"
      frame forwarding (based on DMAC) - there is connectivity through the
      switch only because all frames are flooded.
      I debated whether this patch qualifies as a fix, since it puts the
      switch into a mode it has never operated in before (aka SVL). But
      "normal" forwarding did use to work before the "Traffic support for
      SJA1105 DSA driver" patchset, and arguably this patch should have been
      part of that.
      Also, it would be strange for this feature to be broken in the 5.2 LTS.
      
      Patch 2/5 ("net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as
      well") is a simplification of a previous FDB-related patch that is
      currently in the 5.3 rc's.
      
      Patches 3/5 - 5/5 fix various crashes found while running linuxptp over the
      switch ports for extended periods of time, or in conjunction with other
      error conditions. The fixed-up commits were all introduced in 5.2.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      feac1d68
    • Vladimir Oltean's avatar
      net: dsa: sja1105: Fix memory leak on meta state machine error path · 93fa8587
      Vladimir Oltean authored
      When RX timestamping is enabled and two link-local (non-meta) frames are
      received in a row, this constitutes an error.
      
      The tagger is always caching the last link-local frame, in an attempt to
      merge it with the meta follow-up frame when that arrives. To recover
      from the above error condition, the initial cached link-local frame is
      dropped and the second frame in a row is cached (in expectance of the
      second meta frame).
      
      However, when dropping the initial link-local frame, its backing memory
      was being leaked.
      
      Fixes: f3097be2 ("net: dsa: sja1105: Add a state machine for RX timestamping")
      Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      93fa8587
    • Vladimir Oltean's avatar
      net: dsa: sja1105: Fix memory leak on meta state machine normal path · f163fed2
      Vladimir Oltean authored
      After a meta frame is received, it is associated with the cached
      sp->data->stampable_skb from the DSA tagger private structure.
      
      Cached means its refcount is incremented with skb_get() in order for
      dsa_switch_rcv() to not free it when the tagger .rcv returns NULL.
      
      The mistake is that skb_unref() is not the correct function to use. It
      will correctly decrement the refcount (which will go back to zero) but
      the skb memory will not be freed.  That is the job of kfree_skb(), which
      also calls skb_unref().
      
      But it turns out that freeing the cached stampable_skb is in fact not
      necessary.  It is still a perfectly valid skb, and now it is even
      annotated with the partial RX timestamp.  So remove the skb_copy()
      altogether and simply pass the stampable_skb with a refcount of 1
      (incremented by us, decremented by dsa_switch_rcv) up the stack.
      
      Fixes: f3097be2 ("net: dsa: sja1105: Add a state machine for RX timestamping")
      Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f163fed2
    • Vladimir Oltean's avatar
      net: dsa: sja1105: Really fix panic on unregistering PTP clock · 6cb0abbd
      Vladimir Oltean authored
      The IS_ERR_OR_NULL(priv->clock) check inside
      sja1105_ptp_clock_unregister() is preventing cancel_delayed_work_sync
      from actually being run.
      
      Additionally, sja1105_ptp_clock_unregister() does not actually get run,
      when placed in sja1105_remove(). The DSA switch gets torn down, but the
      sja1105 module does not get unregistered. So sja1105_ptp_clock_unregister
      needs to be moved to sja1105_teardown, to be symmetrical with
      sja1105_ptp_clock_register which is called from the DSA sja1105_setup.
      
      It is strange to fix a "fixes" patch, but the probe failure can only be
      seen when the attached PHY does not respond to MDIO (issue which I can't
      pinpoint the reason to) and it goes away after I power-cycle the board.
      This time the patch was validated on a failing board, and the kernel
      panic from the fixed commit's message can no longer be seen.
      
      Fixes: 29dd908d ("net: dsa: sja1105: Cancel PTP delayed work on unregister")
      Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6cb0abbd
    • Vladimir Oltean's avatar
      net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well · 4b7da3d8
      Vladimir Oltean authored
      It looks like the FDB dump taken from first-generation switches also
      contains information on whether entries are static or not. So use that
      instead of searching through the driver's tables.
      
      Fixes: d7637782 ("net: dsa: sja1105: Implement is_static for FDB entries on E/T")
      Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4b7da3d8
    • Vladimir Oltean's avatar
      net: dsa: sja1105: Fix broken learning with vlan_filtering disabled · 6d7c7d94
      Vladimir Oltean authored
      When put under a bridge with vlan_filtering 0, the SJA1105 ports will
      flood all traffic as if learning was broken. This is because learning
      interferes with the rx_vid's configured by dsa_8021q as unique pvid's.
      
      So learning technically still *does* work, it's just that the learnt
      entries never get matched due to their unique VLAN ID.
      
      The setting that saves the day is Shared VLAN Learning, which on this
      switch family works exactly as desired: VLAN tagging still works
      (untagged traffic gets the correct pvid) and FDB entries are still
      populated with the correct contents including VID. Also, a frame cannot
      violate the forwarding domain restrictions enforced by its classified
      VLAN. It is just that the VID is ignored when looking up the FDB for
      taking a forwarding decision (selecting the egress port).
      
      This patch activates SVL, and the result is that frames with a learnt
      DMAC are no longer flooded in the scenario described above.
      
      Now exactly *because* SVL works as desired, we have to revisit some
      earlier patches:
      
      - It is no longer necessary to manipulate the VID of the 'bridge fdb
        {add,del}' command when vlan_filtering is off. This is because now,
        SVL is enabled for that case, so the actual VID does not matter*.
      
      - It is still desirable to hide dsa_8021q VID's in the FDB dump
        callback. But right now the dump callback should no longer hide
        duplicates (one per each front panel port's pvid, plus one for the
        VLAN that the CPU port is going to tag a TX frame with), because there
        shouldn't be any (the switch will match a single FDB entry no matter
        its VID anyway).
      
      * Not really... It's no longer necessary to transform a 'bridge fdb add'
        into 5 fdb add operations, but the user might still add a fdb entry with
        any vid, and all of them would appear as duplicates in 'bridge fdb
        show'. So force a 'bridge fdb add' to insert the VID of 0**, so that we
        can prune the duplicates at insertion time.
      
      ** The VID of 0 is better than 1 because it is always guaranteed to be
         in the ports' hardware filter. DSA also avoids putting the VID inside
         the netlink response message towards the bridge driver when we return
         this particular VID, which makes it suitable for FDB entries learnt
         with vlan_filtering off.
      
      Fixes: 227d07a0 ("net: dsa: sja1105: Add support for traffic through standalone ports")
      Signed-off-by: default avatarVladimir Oltean <olteanv@gmail.com>
      Signed-off-by: default avatarGeorg Waibel <georg.waibel@sensor-technik.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6d7c7d94
    • Nishka Dasgupta's avatar
      net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus() · f26e0cca
      Nishka Dasgupta authored
      Each iteration of for_each_available_child_of_node() puts the previous
      node, but in the case of a return from the middle of the loop, there
      is no put, thus causing a memory leak. Hence add an of_node_put() before
      the return.
      Additionally, the local variable ports in the function
      qca8k_setup_mdio_bus() takes the return value of of_get_child_by_name(),
      which gets a node but does not put it. If the function returns without
      putting ports, it may cause a memory leak. Hence put ports before the
      mid-loop return statement, and also outside the loop after its last usage
      in this function.
      Issues found with Coccinelle.
      Signed-off-by: default avatarNishka Dasgupta <nishkadg.linux@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f26e0cca
    • David S. Miller's avatar
      Merge branch 'Support-tunnels-over-VLAN-in-NFP' · ef68de56
      David S. Miller authored
      John Hurley says:
      
      ====================
      Support tunnels over VLAN in NFP
      
      This patchset deals with tunnel encap and decap when the end-point IP
      address is on an internal port (for example and OvS VLAN port). Tunnel
      encap without VLAN is already supported in the NFP driver. This patchset
      extends that to include a push VLAN along with tunnel header push.
      
      Patches 1-4 extend the flow_offload IR API to include actions that use
      skbedit to set the ptype of an SKB and that send a packet to port ingress
      from the act_mirred module. Such actions are used in flower rules that
      forward tunnel packets to internal ports where they can be decapsulated.
      OvS and its TC API is an example of a user-space app that produces such
      rules.
      
      Patch 5 modifies the encap offload code to allow the pushing of a VLAN
      header after a tunnel header push.
      
      Patches 6-10 deal with tunnel decap when the end-point is on an internal
      port. They detect 'pre-tunnel rules' which do not deal with tunnels
      themselves but, rather, forward packets to internal ports where they
      can be decapped if required. Such rules are offloaded to a table in HW
      along with an indication of whether packets need to be passed to this
      table of not (based on their destination MAC address). Matching against
      this table prior to decapsulation in HW allows the correct parsing and
      handling of outer VLANs on tunnelled packets and the correct updating of
      stats for said 'pre-tunnel' rules.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ef68de56
    • John Hurley's avatar
      nfp: flower: encode mac indexes with pre-tunnel rule check · 2e0bc7f3
      John Hurley authored
      When a tunnel packet arrives on the NFP card, its destination MAC is
      looked up and MAC index returned for it. This index can help verify the
      tunnel by, for example, ensuring that the packet arrived on the expected
      port. If the packet is destined for a known MAC that is not connected to a
      given physical port then the mac index can have a global value (e.g. when
      a series of bonded ports shared the same MAC).
      
      If the packet is to be detunneled at a bridge device or internal port like
      an Open vSwitch VLAN port, then it should first match a 'pre-tunnel' rule
      to direct it to that internal port.
      
      Use the MAC index to indicate if a packet should match a pre-tunnel rule
      before decap is allowed. Do this by tracking the number of internal ports
      associated with a MAC address and, if the number if >0, set a bit in the
      mac_index to forward the packet to the pre-tunnel table before continuing
      with decap.
      Signed-off-by: default avatarJohn Hurley <john.hurley@netronome.com>
      Reviewed-by: default avatarSimon Horman <simon.horman@netronome.com>
      Acked-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2e0bc7f3
    • John Hurley's avatar
      nfp: flower: remove offloaded MACs when reprs are applied to OvS bridges · 09aa811b
      John Hurley authored
      MAC addresses along with an identifying index are offloaded to firmware to
      allow tunnel decapsulation. If a tunnel packet arrives with a matching
      destination MAC address and a verified index, it can continue on the
      decapsulation process. This replicates the MAC verifications carried out
      in the kernel network stack.
      
      When a netdev is added to a bridge (e.g. OvS) then packets arriving on
      that dev are directed through the bridge datapath instead of passing
      through the network stack. Therefore, tunnelled packets matching the MAC
      of that dev will not be decapped here.
      
      Replicate this behaviour on firmware by removing offloaded MAC addresses
      when a MAC representer is added to an OvS bridge. This can prevent any
      false positive tunnel decaps.
      Signed-off-by: default avatarJohn Hurley <john.hurley@netronome.com>
      Reviewed-by: default avatarSimon Horman <simon.horman@netronome.com>
      Acked-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      09aa811b
    • John Hurley's avatar
      nfp: flower: offload pre-tunnel rules · f12725d9
      John Hurley authored
      Pre-tunnel rules are TC flower and OvS rules that forward a packet to the
      tunnel end point where it can then pass through the network stack and be
      decapsulated. These are required if the tunnel end point is, say, an OvS
      internal port.
      
      Currently, firmware determines that a packet is in a tunnel and decaps it
      if it has a known destination IP and MAC address. However, this bypasses
      the flower pre-tunnel rule and so does not update the stats. Further to
      this it ignores VLANs that may exist outside of the tunnel header.
      
      Offload pre-tunnel rules to the NFP. This embeds the pre-tunnel rule into
      the tunnel decap process based on (firmware) mac index and VLAN. This
      means that decap can be carried out correctly with VLANs and that stats
      can be updated for all kernel rules correctly.
      Signed-off-by: default avatarJohn Hurley <john.hurley@netronome.com>
      Reviewed-by: default avatarSimon Horman <simon.horman@netronome.com>
      Acked-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f12725d9
    • John Hurley's avatar
      nfp: flower: verify pre-tunnel rules · 120ffd84
      John Hurley authored
      Pre-tunnel rules must direct packets to an internal port based on L2
      information. Rules that egress to an internal port are already indicated
      by a non-NULL device in its nfp_fl_payload struct. Verfiy the rest of the
      match fields indicate that the rule is a pre-tunnel rule. This requires a
      full match on the destination MAC address, an option VLAN field, and no
      specific matches on other lower layer fields (with the exception of L4
      proto and flags).
      
      If a rule is identified as a pre-tunnel rule then mark it for offload to
      the pre-tunnel table. Similarly, remove it from the pre-tunnel table on
      rule deletion. The actual offloading of these commands is left to a
      following patch.
      Signed-off-by: default avatarJohn Hurley <john.hurley@netronome.com>
      Reviewed-by: default avatarSimon Horman <simon.horman@netronome.com>
      Acked-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      120ffd84
    • John Hurley's avatar
      nfp: flower: detect potential pre-tunnel rules · f5c977ee
      John Hurley authored
      Pre-tunnel rules are used when the tunnel end-point is on an 'internal
      port'. These rules are used to direct the tunnelled packets (based on outer
      header fields) to the internal port where they can be detunnelled. The
      rule must send the packet to ingress the internal port at the TC layer.
      
      Currently FW does not support an action to send to ingress so cannot
      offload such rules. However, in preparation for populating the pre-tunnel
      table to represent such rules, check for rules that send to the ingress of
      an internal port and mark them as such. Further validation of such rules
      is left to subsequent patches.
      Signed-off-by: default avatarJohn Hurley <john.hurley@netronome.com>
      Reviewed-by: default avatarSimon Horman <simon.horman@netronome.com>
      Acked-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f5c977ee
    • John Hurley's avatar
      nfp: flower: push vlan after tunnel in merge · 4b10c53d
      John Hurley authored
      NFP allows the merging of 2 flows together into a single offloaded flow.
      In the kernel datapath the packet must match 1 flow, impliment its
      actions, recirculate, match the 2nd flow and also impliment its actions.
      Merging creates a single flow with all actions from the 2 original flows.
      
      Firmware impliments a tunnel header push as the packet is about to egress
      the card. Therefore, if the first merge rule candiate pushes a tunnel,
      then the second rule can only have an egress action for a valid merge to
      occur (or else the action ordering will be incorrect). This prevents the
      pushing of a tunnel header followed by the pushing of a vlan header.
      
      In order to support this behaviour, firmware allows VLAN information to
      be encoded in the tunnel push action. If this is non zero then the fw will
      push a VLAN after the tunnel header push meaning that 2 such flows with
      these actions can be merged (with action order being maintained).
      
      Support tunnel in VLAN pushes by encoding VLAN information in the tunnel
      push action of any merge flow requiring this.
      Signed-off-by: default avatarJohn Hurley <john.hurley@netronome.com>
      Reviewed-by: default avatarSimon Horman <simon.horman@netronome.com>
      Acked-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4b10c53d
    • John Hurley's avatar
      net: sched: add ingress mirred action to hardware IR · 48e584ac
      John Hurley authored
      TC mirred actions (redirect and mirred) can send to egress or ingress of a
      device. Currently only egress is used for hw offload rules.
      
      Modify the intermediate representation for hw offload to include mirred
      actions that go to ingress. This gives drivers access to such rules and
      can decide whether or not to offload them.
      Signed-off-by: default avatarJohn Hurley <john.hurley@netronome.com>
      Reviewed-by: default avatarSimon Horman <simon.horman@netronome.com>
      Reviewed-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      48e584ac
    • John Hurley's avatar
      net: tc_act: add helpers to detect ingress mirred actions · d7609c96
      John Hurley authored
      TC mirred actions can send to egress or ingress on a given netdev. Helpers
      exist to detect actions that are mirred to egress. Extend the header file
      to include helpers to detect ingress mirred actions.
      Signed-off-by: default avatarJohn Hurley <john.hurley@netronome.com>
      Reviewed-by: default avatarSimon Horman <simon.horman@netronome.com>
      Reviewed-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d7609c96
    • John Hurley's avatar
      net: sched: add skbedit of ptype action to hardware IR · fb1b775a
      John Hurley authored
      TC rules can impliment skbedit actions. Currently actions that modify the
      skb mark are passed to offloading drivers via the hardware intermediate
      representation in the flow_offload API.
      
      Extend this to include skbedit actions that modify the packet type of the
      skb. Such actions may be used to set the ptype to HOST when redirecting a
      packet to ingress.
      Signed-off-by: default avatarJohn Hurley <john.hurley@netronome.com>
      Reviewed-by: default avatarSimon Horman <simon.horman@netronome.com>
      Reviewed-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fb1b775a
    • John Hurley's avatar
      net: tc_act: add skbedit_ptype helper functions · 77feb4ee
      John Hurley authored
      The tc_act header file contains an inline function that checks if an
      action is changing the skb mark of a packet and a further function to
      extract the mark.
      
      Add similar functions to check for and get skbedit actions that modify
      the packet type of the skb.
      Signed-off-by: default avatarJohn Hurley <john.hurley@netronome.com>
      Reviewed-by: default avatarSimon Horman <simon.horman@netronome.com>
      Reviewed-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      77feb4ee
    • David S. Miller's avatar
      Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue · 55a47dc2
      David S. Miller authored
      Jeff Kirsher says:
      
      ====================
      100GbE Intel Wired LAN Driver Updates 2019-08-04
      
      This series contains more updates to fm10k from Jake Keller.
      
      Jake removes the unnecessary initialization of some variables to help
      resolve static code checker warnings.  Explicitly return success during
      resume, since the value of 'err' is always success.  Fixed a issue with
      incrementing a void pointer, which can produce undefined behavior.  Used
      the __always_unused macro for function templates that are passed as
      parameters in functions, but are not used.  Simplified the code by
      removing an unnecessary macro in determining the value of NON_Q_VECTORS.
      Fixed an issue, using bitwise operations to prevent the low address
      overwriting the high portion of the address.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      55a47dc2
    • Heiner Kallweit's avatar
      r8169: sync PCIe PHY init with vendor driver 8.047.01 · a7a92cf8
      Heiner Kallweit authored
      Synchronize PCIe PHY initialization with vendor driver version 8.047.01.
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a7a92cf8
    • Heiner Kallweit's avatar
      r8169: add helper r8168_mac_ocp_modify · ef712ede
      Heiner Kallweit authored
      Add a helper for MAC OCP read-modify-write operations.
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ef712ede
    • Heiner Kallweit's avatar
      r8169: remove access to legacy register MultiIntr · a14cc4d2
      Heiner Kallweit authored
      This code piece was inherited from RTL8139 code, the register at
      address 0x5c however has a different meaning on RTL8169 and is unused.
      So we can remove this.
      Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a14cc4d2
    • David S. Miller's avatar
      Merge branch 'fq_codel-small-optimizations' · 2af8cfac
      David S. Miller authored
      Dave Taht says:
      
      ====================
      Two small fq_codel optimizations
      
      These two patches improve fq_codel performance
      under extreme network loads. The first patch
      more rapidly escalates the codel count under
      overload, the second just kills a totally useless
      statistic.
      
      (sent together because they'd otherwise conflict)
      ====================
      Signed-off-by: default avatarDave Taht <dave.taht@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2af8cfac
    • Dave Taht's avatar
      fq_codel: Kill useless per-flow dropped statistic · 77ddaff2
      Dave Taht authored
      It is almost impossible to get anything other than a 0 out of
      flow->dropped statistic with a tc class dump, as it resets to 0
      on every round.
      
      It also conflates ecn marks with drops.
      
      It would have been useful had it kept a cumulative drop count, but
      it doesn't. This patch doesn't change the API, it just stops
      tracking a stat and state that is impossible to measure and nobody
      uses.
      Signed-off-by: default avatarDave Taht <dave.taht@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      77ddaff2
    • Dave Taht's avatar
      Increase fq_codel count in the bulk dropper · ae697f3b
      Dave Taht authored
      In the field fq_codel is often used with a smaller memory or
      packet limit than the default, and when the bulk dropper is hit,
      the drop pattern bifircates into one that more slowly increases
      the codel drop rate and hits the bulk dropper more than it should.
      
      The scan through the 1024 queues happens more often than it needs to.
      
      This patch increases the codel count in the bulk dropper, but
      does not change the drop rate there, relying on the next codel round
      to deliver the next packet at the original drop rate
      (after that burst of loss), then escalate to a higher signaling rate.
      Signed-off-by: default avatarDave Taht <dave.taht@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ae697f3b
    • David S. Miller's avatar
      Merge branch 'flow_offload-action-fixes' · 443bfb4a
      David S. Miller authored
      Vlad Buslov says:
      
      ====================
      action fixes for flow_offload infra compatibility
      
      Fix rcu warnings due to usage of action helpers that expect rcu read lock
      protection from rtnl-protected context of flow_offload infra.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      443bfb4a