- 30 Nov, 2011 7 commits
-
-
Mauro Carvalho Chehab authored
All devices should support alsa module. Devices with DVB will auto-load the dvb module. This way, tm6000-based devices should now have hot plugin. Signed-off-by:Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
This should allow using 24 or 32 bits NEC IR decoding tables with those devices. Signed-off-by: -
Mauro Carvalho Chehab authored
Now that the tm6000 driver is on a good shape, we can enable device autodetection, based on the USB ID. Signed-off-by: -
Mauro Carvalho Chehab authored
The IR support were broken on my tests with HVR-900H. Also, there were several issues on the current implementation. This patch is a major rewrite of the IR support for this - Improve debug messages; - Don't do polling for interrrupt based IR; - Add proper support for RC-5 protocol; - Always provide 16 bits for NEC and RC-5; - Fix polling code; - Split polling functions from URB Interrupt ones; - Don't hardcode the XTAL reference for tm6000 IR; - If a URB submit fails, retries after 100ms; - etc. Tested on Hauppauge HVR-900H, with RC-5 and NEC remotes. Issues on IR handling, on this device: - Repeat events aren't detected (neither on NEC or RC-5); - NEC codes are always provided with 16 bits. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Fix lock bit to better indicate signal strength, from 4096 to 65535. Signed-off-by: -
Mauro Carvalho Chehab authored
IR registers 0xd9 to 0xdf were badly named, making harder to check what's the register accessed at the RC code. Fix the name convention. No functional changes on this patch. Signed-off-by:
-
- 28 Nov, 2011 8 commits
-
-
Mauro Carvalho Chehab authored
drivers/media/video/tm6000/tm6000-video.c: In function ‘tm6000_release’: drivers/media/video/tm6000/tm6000-video.c:1608:7: warning: unused variable ‘err’ [-Wunused-variable] Signed-off-by: -
Stefan Ringel authored
beholder use a map with 3 bytes, but many rc maps have 2 bytes, so I add a workaround for beholder rc. Signed-off-by:
Stefan Ringel <linuxtv@stefanringel.de> Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Stefan Ringel authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
A V4L2 standards mask may contain several standards. A more restricted mask with just one standard is used when user needs to bind to an specific standard that can't be auto-detect among a more generic mask. So, Improve the autodetection logic to detect the correct audio standard most of the time. Based on a patch made by Dmitri Belimov <d.belimov@gmail.com>. Signed-off-by: -
Mauro Carvalho Chehab authored
There are some properties found on em28xx, but not on tm6000. Add them, in order to be more consistent. Signed-off-by:
-
- 26 Nov, 2011 2 commits
-
-
Janusz Krzysztofik authored
Otherwise compilation breaks with: ... after apparently no longer included recursively from other header files. Signed-off-by:
Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by:
-
Dan Carpenter authored
This silences the following Sparse warnings: lirc_imon.c:404:32: warning: incorrect type in argument 1 (different address spaces) lirc_imon.c:404:32: expected void const [noderef] <asn:1>*<noident> lirc_imon.c:404:32: got char const *buf lirc_imon.c:117:28: warning: incorrect type in initializer (incompatible argument 2 (different address spaces)) lirc_imon.c:117:28: expected long ( *write )( ... ) lirc_imon.c:117:28: got long ( static [toplevel] *<noident> )( ... ) Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 25 Nov, 2011 5 commits
-
-
Dan Carpenter authored
We pass this to fm_tx_set_radio_text() which expects a NUL terminated string. Signed-off-by:
-
Hans Verkuil authored
V4L2_FBUF_CAP_SRC_CHROMAKEY is the opposite of V4L2_FBUF_CAP_CHROMAKEY, but according to the documentation it was the same. The terms 'video' and 'framebuffer' were accidentally swapped in the text. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> CC: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
-
Hans Verkuil authored
high-latency devices. Thanks to Hans de Goede for our discussions on this topic. Signed-off-by:
-
Hans Verkuil authored
As per discussion during the 2011 V4L-DVB workshop. Signed-off-by:
-
Hans Verkuil authored
For some reason the V4L2_TUNER_CAP_RDS_CONTROLS/BLOCK_IO capabilities were never documented in the proper table. In addition, then RDS interface section incorrectly referred to them as V4L2_TUNER_SUB_RDS_... instead of CAP_RDS_... This is now fixed. Signed-off-by:
-
- 24 Nov, 2011 18 commits
-
-
Pete authored
commit a846d8fce9e8be30046be3c512982bd0345e7015 The 2250 board uses bulk endpoint for interrupt handling, and should use a bulk urb instead of an int urb. Signed-off-by:
Pete Eberlein <pete@sensoray.com> Signed-off-by:
-
Thomas Meyer authored
The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
-
Thomas Meyer authored
The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by:
-
Thomas Meyer authored
The semantic patch that makes this change is available in scripts/coccinelle/api/alloc/drop_kmalloc_cast.cocci. Signed-off-by:
-
Thomas Meyer authored
The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by:
-
Thomas Meyer authored
The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by:
-
Olivier Grenie authored
The intend of this patch is to limit the maximum I2C speed. Signed-off-by:
Olivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by:
Patrick Boettcher <patrick.boettcher@dibcom.fr> Signed-off-by:
-
Olivier Grenie authored
The intend of this patch is to add the support for the DiBcom reference board TFE8096P. Signed-off-by:
-
Olivier Grenie authored
The purpose of this patch is to support the DiBcom chip dib8096P. Signed-off-by:
-
Olivier Grenie authored
The intend of this patch is to add the support for the DiBcom reference board TFE7790E. Signed-off-by:
-
Olivier Grenie authored
This patches improves the tuning of the dib8000 and correct the monitoringr of the SNR.The patch allows to faster detect that there is no ISDB-T channel on the wanted frequency. Signed-off-by:
-
Olivier Grenie authored
The intend of this patch is to correct some warnings given. Signed-off-by:
-
Olivier Grenie authored
The intend of this patch is to add the support for the DiBcom reference board TFE7090E. Signed-off-by:
-
Olivier Grenie authored
This patch intends to update the dib7000p and dib0090 driver in order to improve the performances. Signed-off-by:
-
Gianluca Gennari authored
Add support for the Sky Italia Digital Key, an USB dongle offered by Sky Italia to its customers for use with their satellite set-top-boxes. This is the "green led" model based on the Abilis as102 chip, while the so called "blue led" model is based on the Avermedia A867 design. Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
Sylwester Nawrocki <snjw23@gmail.com> Signed-off-by:
Gianluca Gennari <gennarone@gmail.com> Signed-off-by:
-
Andreas Oberritter authored
Signed-off-by:
Andreas Oberritter <obi@linuxtv.org> Signed-off-by:
-
Tomas Winkler authored
Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
Drop usb_class_driver and collaterals as it is not used Signed-off-by:
-
