- 18 Feb, 2019 40 commits
-
-
Rui Miguel Silva authored
Some imx system do not have IPU, so prepare the imx media drivers to support this kind of devices. Rename the group ids to include an _IPU_ prefix, add a new group id to support systems with only a CSI without IPU, and also rename the create internal links to make it clear that only systems with IPU have internal subdevices. Signed-off-by:
Rui Miguel Silva <rui.silva@linaro.org> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Rui Miguel Silva authored
Refactor and move media device initialization code to a new common module, so it can be used by other devices, this will allow for example a near to introduce imx7 CSI driver, to use this media device. Signed-off-by:
-
Patrick Lerda authored
smipcie: switch to RC_DRIVER_IR_RAW. Signed-off-by:
Patrick Lerda <patrick9876@free.fr> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Matthias Reichl authored
The Zotac RC2604323/01G and RC2604329/02BG remotes use the 32-bit rc6 protocol and toggle bit 15 (0x8000) on repeated button presses, like MCE remotes. Add the customer code 0x80340000 to the 32-bit rc6 toggle handling code to get proper scancodes and toggle reports. Signed-off-by:
Matthias Reichl <hias@horus.com> Signed-off-by:
-
Patrick Lerda authored
media: add support for RCMM infrared remote controls. Signed-off-by:
-
Akinobu Mita authored
The runtime PM of this device is enabled after v4l2_ctrl_handler_setup(), and this makes this device's runtime PM usage count a negative value. The ov7740_set_ctrl() tries to do something only if the device's runtime PM usage counter is nonzero. ov7740_set_ctrl() { if (!pm_runtime_get_if_in_use(&client->dev)) return 0; <do something>; pm_runtime_put(&client->dev); return ret; } However, the ov7740_set_ctrl() is called by v4l2_ctrl_handler_setup() while the runtime PM of this device is not yet enabled. In this case, the pm_runtime_get_if_in_use() returns -EINVAL (!= 0). Therefore we can't bail out of this function and the usage count is decreased by pm_runtime_put() without increment. This fixes this problem by enabling the runtime PM of this device before v4l2_ctrl_handler_setup() so that the ov7740_set_ctrl() is always called when the runtime PM is enabled. Cc: Wenyou Yang <wenyou.yang@microchip.com> Signed-off-by:Akinobu Mita <akinobu.mita@gmail.com> Tested-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Dafna Hirschfeld authored
Add a flag 'FWHT_FL_I_FRAME' that indicates that this is an I-frame. This requires incrementing to version 3 This flag is needed for the upcoming stateless FWHT decoder since it has to know if an encoded frame is an I or a P frame. Signed-off-by:
Dafna Hirschfeld <dafna3@gmail.com> [hverkuil-cisco@xs4all.nl: added the last paragraph of the commit msg] Signed-off-by:
-
Paul Kocialkowski authored
Since there's a v4l2_m2m_get_vq helper, use it instead of accessing the queue directly, which slightly increases readability. Also reformat the code using the queue a bit while at it. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Paul Kocialkowski authored
Check that our queues are not busy before setting the format or return EBUSY if that's the case. This ensures that our format can't change once buffers are allocated for the queue. Signed-off-by:
-
Colin Ian King authored
The check to see if type is V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE is redundant as this has been already checked at the start of the function and if it's not that value then -ENOSYS is returned. Hence the sprintf can be replaced by a simpler string copy. Detected by CoverityScan, CID#1309450 ("Logically dead code") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Ezequiel Garcia authored
This commit changes the return type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove which currently return void pointer. In every case, the actual return type is a struct vb2_v4l2_buffer pointer. Change the return type of the listed functions, so type checking can be properly used. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Jacopo Mondi authored
Since the removal of the stale soc_camera headers, Migo-R board fails to build due to missing dma-mapping include directive. Include missing dma-mapping.h header in Migo-R board file to fix the build error. Fixes: a50c7738 ("media: sh: migor: Remove stale soc_camera include") Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Tim Harvey authored
set_edid never wrote the new EDID to state->edid.edid, it was only written to the hardware. Since get_edid returned state->edid.edid, it was never returning the right EDID. Signed-off-by:
Tim Harvey <tharvey@gateworks.com> Signed-off-by:
-
Chen-Yu Tsai authored
The CSI controller can take raw data from the data bus and output it directly to capture buffers. This can be used to support the JPEG media bus format. While the controller can report minimum and maximum bytes per line, it has no way to report how many lines were captured in the last frame. Thus, even when the on-bus data is framed correctly, we have no way to accertain the actual amount of data captured, unless we scan the buffer for JPEG EOI markers, or sequential zeros. For now we leave bytesused alone, and leave it up to userspace applications to parse the data. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Chen-Yu Tsai authored
The CSI controller can take raw data from the data bus and output RGB565 format. The controller does not distinguish between RGB565 LE and BE. Instead this is determined by the media bus format, i.e. the format or order the sensor is sending data in. Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Chen-Yu Tsai authored
max_register is currently set to 0x1000. This is beyond the mapped address range of the hardware, so attempts to dump the regmap from debugfs would trigger a kernel exception. Furthermore, the useful registers only occupy a small section at the beginning of the full range. Change the value to 0x9c, the last known register on the V3s and H3. On the A31, the register range is extended to support additional capture channels. Since this is not yet supported, ignore it for now. Fixes: 5cc7522d ("media: sun6i: Add support for Allwinner CSI V3s") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Fabrizio Castro authored
Document RZ/G2 support. Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Fabrizio Castro authored
Document RZ/G1 and RZ/G2 support. Signed-off-by:
-
Hans Verkuil authored
drivers/media/platform/vsp1/vsp1_drm.c: drivers/media/platform/vsp1/vsp1_drm.c:336 vsp1_du_pipeline_setup_brx() error: we previously assumed 'pipe->brx' could be null (see line 244) smatch missed that if pipe->brx was NULL, then later on it will be set with a non-NULL value. But it is easier to just use the brx pointer so smatch doesn't get confused. Tested-on: Salvator-XS-ES2.0, Salvator-XS-M3N Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by:
-
Hans Verkuil authored
The uvc driver uses this function to fill in bus_info for VIDIOC_QUERYCAP, so use the same function when filling in the bus_info for the media device. The current implementation only fills in part of the info. E.g. if the full bus_info is usb-0000:01:00.0-1.4.2, then the media bus_info only has 1.4.2. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
drivers/media/usb/uvc/uvc_video.c: drivers/media/usb/uvc/uvc_video.c:1893 uvc_video_start_transfer() warn: argument 2 to %u specifier is cast from pointer Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by:
-
Yong Zhi authored
Language improvements, fix entity naming, make pipeline a graph and move device usage documentation to device documentation ipu3.rst. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
-
Jagan Teki authored
CSI block in Allwinner A64 has similar features as like in H3, but the default CSI_SCLK rate cannot work properly to drive the connected sensor interface. The tested mod cock rate is 300 MHz and BSP vfe media driver is also using the same rate. Unfortunately there is no valid information about clock rate in manual or any other sources except the BSP driver. so more faith on BSP code, because same has tested in mainline. So, add support for A64 CSI block by setting updated mod clock rate. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Acked-by:
-
Jagan Teki authored
Allwinner A64 CSI is a single channel time-multiplexed BT.656 protocol interface. Add separate compatible string for A64 since it require explicit change in sun6i_csi driver to update default CSI_SCLK rate. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Hans Verkuil authored
The extended-controls.rst file had become too big. Split it up: each control class reference gets its own rst file, and this file just describes the Extended Control API. Each control class reference is also moved up one level into the table of contents to make it easier to find e.g. the codec control reference. Finally I rearranged the order so that all camera-related control classes are grouped together, ditto for codec/jpeg and fm-rx/tx. The ext-ctrls-codec.rst is still pretty big and it is a candidate to split up further in the future, possibly per codec. Signed-off-by:
-
Hans Verkuil authored
The epoll function expects that whenever the poll file op is called, the poll_wait function is also called. That didn't always happen in dvb_demux_poll(), dvb_dvr_poll() and dvb_ca_en50221_io_poll(). Fix this, otherwise epoll() can timeout when it shouldn't. Signed-off-by:
-
Hans Verkuil authored
The epoll function expects that whenever the poll file op is called, the poll_wait function is also called. That didn't always happen in videobuf_poll_stream(). Fix this, otherwise epoll() would timeout when it shouldn't. Signed-off-by:
-
Hans Verkuil authored
The v4l2_m2m_poll function didn't check whether q->error was set for either of the two queues. Add support for this. Signed-off-by:
-
Hans Verkuil authored
The epoll function expects that whenever the poll file op is called, the poll_wait function is also called. That didn't always happen in v4l2_m2m_poll(). Fix this, otherwise epoll() would timeout when it shouldn't. Signed-off-by:
-
Hans Verkuil authored
The epoll function expects that whenever the poll file op is called, the poll_wait function is also called. That didn't always happen in v4l2_ctrl_poll(). Fix this, otherwise epoll() would timeout when it shouldn't. Signed-off-by:
-
Hans Verkuil authored
The epoll function expects that whenever the poll file op is called, the poll_wait function is also called. That didn't always happen in vb2_core_poll() and vb2_poll(). Fix this, otherwise epoll() would timeout when it shouldn't. Signed-off-by:
Yi Qingliang <niqingliang2003@gmail.com> Signed-off-by:
-
