- 10 Sep, 2009 1 commit
-
-
Benny Halevy authored
Move struct rpc_buffer's definition into a sunrpc.h, a common, internal header file, in preparation for supporting the nfsv4.1 backchannel. Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfs41: sunrpc: #include <linux/net.h> from sunrpc.h] Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
- 04 Sep, 2009 3 commits
-
-
J. Bruce Fields authored
Note the !dchild->d_inode case can leak the filehandle. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
J. Bruce Fields authored
Make the return from compose_entry_fh() zero or an error, even though the returned error isn't used, just to make the meaning of the return immediately obvious. Move some repeated code out of main function into helper. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
J. Bruce Fields authored
A number of callers (nfsd4_encode_fattr(), at least) don't bother to release the filehandle returned to fh_compose() if fh_compose() returns an error. So, modify fh_compose() to release the filehandle before returning an error. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
- 03 Sep, 2009 3 commits
-
-
Trond Myklebust authored
nfsd4_path() allocates a temporary filehandle and then fails to free it before the function exits, leaking reference counts to the dentry and export that it refers to. Also, nfsd4_lookupp() puts the result of exp_pseudoroot() in a temporary filehandle which it releases on success of exp_pseudoroot() but not on failure; fix exp_pseudoroot to ensure that on failure it releases the filehandle before returning. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
J. Bruce Fields authored
More trivial cleanup. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
J. Bruce Fields authored
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
- 02 Sep, 2009 5 commits
-
-
Andy Adamson authored
Use NFSD_SLOT_CACHE_SIZE size buffers for sessions DRC instead of holding nfsd pages in cache. Connectathon testing has shown that 1024 bytes for encoded compound operation responses past the sequence operation is sufficient, 512 bytes is a little too small. Set NFSD_SLOT_CACHE_SIZE to 1024. Allocate memory for the session DRC in the CREATE_SESSION operation to guarantee that the memory resource is available for caching responses. Allocate each slot individually in preparation for slot table size negotiation. Remove struct nfsd4_cache_entry and helper functions for the old page-based DRC. The iov_len calculation in nfs4svc_encode_compoundres is now always correct. Replay is now done in nfsd4_sequence under the state lock, so the session ref count is only bumped on non-replay. Clean up the nfs4svc_encode_compoundres session logic. The nfsd4_compound_state statp pointer is also not used. Remove nfsd4_set_statp(). Move useful nfsd4_cache_entry fields into nfsd4_slot. Signed-off-by: Andy Adamson <andros@netapp.com Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
nfserr_resource is not a legal error for NFSv4.1. Replace it with nfserr_serverfault for EXCHANGE_ID and CREATE_SESSION processing. We will also need to map nfserr_resource to other errors in routines shared by NFSv4.0 and NFSv4.1 Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
This fixes a bug in the sequence operation reply. The sequence operation returns the highest slotid it will accept in the future in sr_highest_slotid, and the highest slotid it prefers the client to use. Since we do not re-negotiate the session slot table yet, these should both always be set to the session ca_maxrequests. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Andy Adamson authored
By using the requested ca_maxresponsesize_cached * ca_maxresponses to bound a forechannel drc request size, clients can tailor a session to usage. For example, an I/O session (READ/WRITE only) can have a much smaller ca_maxresponsesize_cached (for only WRITE compound responses) and a lot larger ca_maxresponses to service a large in-flight data window. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Trond Myklebust authored
The fact that the filesystem doesn't currently list any alternate locations does _not_ imply that the fs_locations attribute should be marked as "unsupported". Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
- 28 Aug, 2009 1 commit
-
-
Andy Adamson authored
Compounds consisting of only a sequence operation don't need any additional caching beyond the sequence information we store in the slot entry. Fix nfsd4_is_solo_sequence to identify this case correctly. The additional check for a failed sequence in nfsd4_store_cache_entry() is redundant, since the nfsd4_is_solo_sequence call lower down catches this case. The final ce_cachethis set in nfsd4_sequence is also redundant. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
- 27 Aug, 2009 3 commits
-
-
Frank Filz authored
RFC 3530 says "ACE4_IDENTIFIER_GROUP flag MUST be ignored on entries with these special identifiers. When encoding entries with these special identifiers, the ACE4_IDENTIFIER_GROUP flag SHOULD be set to zero." It really shouldn't matter either way, but the point is that this flag is used to distinguish named users from named groups (since unix allows a group to have the same name as a user), so it doesn't really make sense to use it on a special identifier such as this.) Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Wei Yongjun authored
sunrpc: "Move close processing to a single place" (d7979ae4) moved the close processing before the recvfrom method. This may cause the close processing never to execute. So this patch moves it to the right place. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Benny Halevy authored
Until we work out the state locking so we can use a spin lock to protect the cl_lru, we need to take the state_lock to renew the client. Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: Do not renew state on error] Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: Simplify exit code] Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
- 25 Aug, 2009 3 commits
-
-
Wei Yongjun authored
When an RPC message is received with RPCSEC_GSS with an unknown service (not RPC_GSS_SVC_NONE, RPC_GSS_SVC_INTEGRITY, or RPC_GSS_SVC_PRIVACY), svcauth_gss_accept() returns AUTH_BADCRED, but svcauth_gss_release() subsequently drops the response entirely, discarding the error. Fix that so the AUTH_BADCRED error is returned to the client. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Ryusei Yamaguchi authored
lock_kernel() in knfsd was replaced with a mutex. The later commit 03cf6c9f ("knfsd: add file to export stats about nfsd pools") did not follow that change. This patch fixes the issue. Also move the get and put of nfsd_serv to the open and close methods (instead of start and stop methods) to allow atomic check and increment of reference count in the open method (where we can still return an error). Signed-off-by: Ryusei Yamaguchi <mandel59@gmail.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: Greg Banks <gnb@fmeh.org> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Frank Filz authored
The group deny entries end up denying tcy even though tcy was just allowed by the allow entry. This appears to be due to: ace->access_mask = mask_from_posix(deny, flags); instead of: ace->access_mask = deny_mask_from_posix(deny, flags); Denying a previously allowed bit has no effect, so this shouldn't affect behavior, but it's ugly. Signed-off-by: Frank Filz <ffilzlnx@us.ibm.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
- 24 Aug, 2009 1 commit
-
-
Alexandros Batsakis authored
Factor functionality out of svc_tcp_recvfrom() to simplify routine Signed-off-by: Alexandros Batsakis <batsakis@netapp.com> Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
- 21 Aug, 2009 8 commits
-
-
Jeff Layton authored
When a SETCLIENTID call comes in, one of the args given is the svc_rqst. This struct contains an rq_addr field which holds the address that sent the call. If this is an IPv6 address, then we can use the sin6_scope_id field in this address to populate the sin6_scope_id field in the callback address. AFAICT, the rq_addr.sin6_scope_id is non-zero if and only if the client mounted the server's link-local address. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Jeff Layton authored
The framework to add this is all in place. Now, add the code to allow support for establishing a callback channel on an IPv6 socket. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Jeff Layton authored
...rather than as a separate address and port fields. This will be necessary for implementing callbacks over IPv6. Also, convert gen_callback to use the standard rpcuaddr2sockaddr routine rather than its own private one. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Jeff Layton authored
It's currently a __be32, which isn't big enough to hold an IPv6 address. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Jeff Layton authored
Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
Jeff Layton authored
lockd needs these sort of routines, as does the NFSv4 callback code. Move lockd's routines into common code and rename them so that they can be used by others. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
-
J. Bruce Fields authored
Merge branch 'nfs-for-2.6.32' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6 into for-2.6.32-incoming Conflicts: net/sunrpc/cache.c
-
Trond Myklebust authored
We can oops if rpc_pipefs isn't properly initialised before we start to set up objects that depend upon it. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 20 Aug, 2009 1 commit
-
-
J. Bruce Fields authored
This include is needed for the definition of delayed_work. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 19 Aug, 2009 6 commits
-
-
Jan Kara authored
generic_file_direct_write() no longer calls generic_osync_inode() so remove the comment. CC: linux-nfs@vger.kernel.org CC: Neil Brown <neilb@suse.de> CC: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Otherwise we Oops if the module containing the cache detail is removed before all cache readers have closed the file. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
In the referral code, use it to look up the new server's ip address if the fs_locations attribute contains a hostname. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
The NFSv4 and NFSv4.1 protocols both allow for the redirection of a client from one server to another in order to support filesystem migration and replication. For full protocol support, we need to add the ability to convert a DNS host name into an IP address that we can feed to the RPC client. We'll reuse the sunrpc cache, now that it has been converted to work with rpc_pipefs. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
We want the channel to be a regular file, so that we don't need to supply rpc_pipe_ops. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Conflicts: fs/nfs/nfs4xdr.c
-
- 14 Aug, 2009 5 commits
-
-
Benny Halevy authored
do not increment decoding ptr if not needed. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Benny Halevy authored
Use xdr_inline_decode instead. Open code debug printout and error return. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Benny Halevy authored
Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Benny Halevy authored
Just directly call memcpy. Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Benny Halevy authored
Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-