- 19 Feb, 2019 10 commits
-
-
Thomas Bogendoerfer authored
This commit rearranges the HUB interrupt code by using MIPS_IRQ_CPU interrupt handling code and modern Linux IRQ framework features to get rid of global arrays. It also adds support for irq affinity setting. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Thomas Bogendoerfer authored
To make use of per_cpu variables in interrupt code per_cpu_init() must be done after setup_per_cpu_areas(). This is achieved by calling it in smp_prepare_boot_cpu() via a new smp_ops method. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Thomas Bogendoerfer authored
Move xtalk scanning to a later boot stage to be able using things like kmalloc and friends. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Thomas Bogendoerfer authored
Topology and NMI output needs pr_cont() to look the way it was in the old days of printk. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Thomas Bogendoerfer authored
Introduced bridge_read/bridge_write/bridge_set/bridge_clr for accessing bridge register and get rid of volatile declarations. Also removed all typedefs from arch/mips/include/asm/pci/bridge.h and cleaned up language in arch/mips/pci/ops-bridge.c Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Thomas Bogendoerfer authored
Replace hub register access with __raw_readq/__raw_writeq and get rid of hubreg_t completely. Also remove no longer (probably never used) used defines Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Liu Xiang authored
The irq_pages is the number of pages for irq stack, but not the order which is needed by __get_free_pages(). We can use get_order() to calculate the accurate order. Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn> Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: fe8bd18f ("MIPS: Introduce irq_stack") Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.11+
-
Paul Burton authored
Commit e36863a5 ("MIPS: HIGHMEM DMA on noncoherent MIPS32 processors") introduced code which: 1) Calculates an offset within a page, by ANDing an address with ~PAGE_MASK. 2) Checks whether that offset is >= PAGE_SIZE. This check can never evaluate true, making the code it guards unreachable. smatch spots bogus arithmetic resulting from the impossible condition, resulting in the following warning: arch/mips/mm/dma-noncoherent.c:125 dma_sync_phys() warn: mask and shift to zero Fix this by removing the impossible to satisfy condition & the unreachable code it guards. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Christoph Hellwig <hch@lst.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Robin Murphy <robin.murphy@arm.com>
-
Paul Burton authored
REG_32BIT_ZERO_EX and REG_64BIT are always handled in exactly the same way, and reg_val_propagate_range() never actually sets any register to type REG_32BIT_ZERO_EX. Remove the redundant & unused REG_32BIT_ZERO_EX. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jiong Wang <jiong.wang@netronome.com>
-
Paul Burton authored
The function prototype used to call JITed eBPF code (ie. the type of the struct bpf_prog bpf_func field) returns an unsigned int. The MIPS n64 ABI that MIPS64 kernels target defines that 32 bit integers should always be sign extended when passed in registers as either arguments or return values. This means that when returning any value which may not already be sign extended (ie. of type REG_64BIT or REG_32BIT_ZERO_EX) we need to perform that sign extension in order to comply with the n64 ABI. Without this we see strange looking test failures from test_bpf.ko, such as: test_bpf: #65 ALU64_MOV_X: dst = 4294967295 jited:1 ret -1 != -1 FAIL (1 times) Although the return value printed matches the expected value, this is only because printf is only examining the least significant 32 bits of the 64 bit register value we returned. The register holding the expected value is sign extended whilst the v0 register was set to a zero extended value by our JITed code, so when compared by a conditional branch instruction the values are not equal. We already handle this when the return value register is of type REG_32BIT_ZERO_EX, so simply extend this to also cover REG_64BIT. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: b6bd53f9 ("MIPS: Add missing file for eBPF JIT.") Cc: stable@vger.kernel.org # v4.13+ Cc: linux-mips@vger.kernel.org Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jiong Wang <jiong.wang@netronome.com>
-
- 15 Feb, 2019 1 commit
-
-
Paul Burton authored
mips_cm_error_report() contains a function call that's incorrectly indented a level further than it ought to be. Remove a tab from the start of both affected lines. Signed-off-by: Paul Burton <paul.burton@mips.com>
-
- 11 Feb, 2019 1 commit
-
-
Rafał Miłecki authored
1) Fix reset button support which is active *high* 2) Specify LEDs colors Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org
-
- 07 Feb, 2019 6 commits
-
-
Aaro Koskinen authored
Program rx/tx-delay always from DT. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Aaro Koskinen authored
Delete board-specific link status. This info should now come from the DT only. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Aaro Koskinen authored
The fixed-link node in the DT should now take care of the link status, so this hack can be deleted. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Aaro Koskinen authored
Warn if deprecated link status is being used. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Aaro Koskinen authored
Currently OCTEON ethernet falls back to phyless operation on boards where we have no known PHY address or a fixed-link node. Add fixed-link support for boards that need it, so we can clean up the platform code and ethernet driver from some legacy code. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
Commit adcc81f1 ("MIPS: math-emu: Write-protect delay slot emulation pages") left flush_cache_sigtramp() unused. Delete the dead code. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: linux-mips@vger.kernel.org
-
- 06 Feb, 2019 1 commit
-
-
Paul Burton authored
Commit 46011e6e ("MIPS: Make set_pte() SMP safe.") introduced an open-coded version of cmpxchg() within set_pte(), that always operated on a value the size of an unsigned long. That is, it used ll/sc instructions when CONFIG_32BIT=y or lld/scd instructions when CONFIG_64BIT=y. This was broken for configurations in which pte_t is larger than an unsigned long (with the exception of XPA configurations which have a different implementation of set_pte()), because we no longer update the whole PTE. Indeed commit 46011e6e ("MIPS: Make set_pte() SMP safe.") notes: > The case of CONFIG_64BIT_PHYS_ADDR && CONFIG_CPU_MIPS32 is *not* > handled. In practice this affects Netlogic XLR/XLS systems including nlm_xlr_defconfig. Commit 82f4f66d ("MIPS: Remove open-coded cmpxchg() in set_pte()") then replaced this open-coded version of cmpxchg() with an actual call to cmpxchg(). Unfortunately the configurations mentioned above then fail to build because cmpxchg() can only operate on values 32 bits or smaller in size, resulting in: arch/mips/include/asm/cmpxchg.h:166:11: error: call to '__cmpxchg_called_with_bad_pointer' declared with attribute error: Bad argument size for cmpxchg One option that would fix the build failure & restore the previous behaviour would be to cast the pte pointer to a pointer to unsigned long, so that cmpxchg() would operate on just 32 bits of the PTE as it has been since commit 46011e6e ("MIPS: Make set_pte() SMP safe."). That feels like an ugly hack though, and the behaviour of set_pte() is likely a little broken. Instead we take advantage of the fact that the affected configurations already know at compile time that the CPU will support 64 bits (ie. have hardcoded cpu_has_64bits in cpu-feature-overrides.h) in order to allow cmpxchg64() to be used in these configurations. set_pte() then makes use of cmpxchg64() when necessary. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 46011e6e ("MIPS: Make set_pte() SMP safe.") Fixes: 82f4f66d ("MIPS: Remove open-coded cmpxchg() in set_pte()")
-
- 05 Feb, 2019 1 commit
-
-
Paul Burton authored
KVM makes use of check_switch_mmu_context(), check_mmu_context() & get_new_mmu_context() which are no longer static inline functions in a header. As such they need to be exported for KVM to successfully build as a module, which was previously overlooked. Add the missing exports. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 4ebea49c ("MIPS: mm: Un-inline get_new_mmu_context") Fixes: 42d5b846 ("MIPS: mm: Unify ASID version checks")
-
- 04 Feb, 2019 19 commits
-
-
Paul Burton authored
Commit 7b3415f5 ("MIPS: Loongson32: Remove unused platform devices") removed the definitions of platform devices which have no in tree drivers from common Loongson32 code, but missed their removal from Loongson 1B board code in arch/mips/loongson32/ls1b/board.c. This causes build failures due to the missing declarations of ls1x_dma_pdev, ls1x_nand_pdev & their associated *_set_platdata functions. Remove the dead code from arch/mips/loongson32/ls1b/board.c to fix the build. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: 7b3415f5 ("MIPS: Loongson32: Remove unused platform devices")
-
Paul Burton authored
Commit a96d68ba ("MIPS: Loongson32: clarify we don't support MIPS16 and merge configs") attempted to reduce duplication in Kconfig by consolidating some selects common to Loongson 1B & 1C CPUs under CPU_LOONGSON1. Unfortunately it clearly wasn't tested because by removing SYS_SUPPORTS_32BIT_KERNEL it prevented 32BIT from being enabled leading to all sorts of strange build errors from a kernel configured to build as neither 32 nor 64 bit. Both loongson1b_defconfig & loongson1c_defconfig failed to build due to this problem. Revert the cleanup portions of commit a96d68ba ("MIPS: Loongson32: clarify we don't support MIPS16 and merge configs"), keeping only its removal of the selection of SYS_SUPPORTS_MIPS16. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: a96d68ba ("MIPS: Loongson32: clarify we don't support MIPS16 and merge configs")
-
Paul Burton authored
Commit f263f2a2 ("MIPS: Compile post DMA flush only when needed") pushed the selection of ARCH_HAS_SYNC_DMA_FOR_CPU down to various SYS_HAS_CPU_* Kconfig entries corresponding to CPUs for which cpu_needs_post_dma_flush() might return true, but unfortunately missed the fact that some of these CPUs can be used in configurations with DMA_NONCOHERENT=n. When this is the case the kernel build does not include our definition of arch_sync_dma_for_cpu() from arch/mips/mm/dma-noncoherent.c and the build fails with a link error. One example of this problem is ip27_defconfig: kernel/dma/direct.o: In function `dma_direct_sync_single_for_cpu': direct.c:(.text+0x6c): undefined reference to `arch_sync_dma_for_cpu' kernel/dma/direct.o: In function `dma_direct_sync_sg_for_cpu': direct.c:(.text+0x1f0): undefined reference to `arch_sync_dma_for_cpu' kernel/dma/direct.o: In function `dma_direct_alloc': direct.c:(.text+0xc20): undefined reference to `arch_dma_alloc' kernel/dma/direct.o: In function `dma_direct_free': direct.c:(.text+0xc3c): undefined reference to `arch_dma_free' make[1]: *** [Makefile:1021: vmlinux] Error 1 make: *** [Makefile:152: sub-make] Error 2 Fix this by selecting ARCH_HAS_SYNC_DMA_FOR_CPU only when DMA_NONCOHERENT is also selected. The SYS_HAS_CPU_BMIPS5000 case is left as-is because systems with that CPU always select DMA_NONCOHERENT anyway. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: f263f2a2 ("MIPS: Compile post DMA flush only when needed")
-
Paul Burton authored
Our hugepage support already exists for MIPS64 CPUs, and is already enabled for older architecture revisions. There's nothing MIPSr6 specific involved, and our hugepage support already works fine for MIPS64r6 CPUs such as the I6500, so allow it to be selected in Kconfig. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
set_pte() contains an open coded version of cmpxchg() - it atomically replaces the buddy pte's value if it is currently zero. Simplify the code considerably by just using cmpxchg() instead of reinventing it. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
Introduce support for using MemoryMapIDs (MMIDs) as an alternative to Address Space IDs (ASIDs). The major difference between the two is that MMIDs are global - ie. an MMID uniquely identifies an address space across all coherent CPUs. In contrast ASIDs are non-global per-CPU IDs, wherein each address space is allocated a separate ASID for each CPU upon which it is used. This global namespace allows a new GINVT instruction be used to globally invalidate TLB entries associated with a particular MMID across all coherent CPUs in the system, removing the need for IPIs to invalidate entries with separate ASIDs on each CPU. The allocation scheme used here is largely borrowed from arm64 (see arch/arm64/mm/context.c). In essence we maintain a bitmap to track available MMIDs, and MMIDs in active use at the time of a rollover to a new MMID version are preserved in the new version. The allocation scheme requires efficient 64 bit atomics in order to perform reasonably, so this support depends upon CONFIG_GENERIC_ATOMIC64=n (ie. currently it will only be included in MIPS64 kernels). The first, and currently only, available CPU with support for MMIDs is the MIPS I6500. This CPU supports 16 bit MMIDs, and so for now we cap our MMIDs to 16 bits wide in order to prevent the bitmap growing to absurd sizes if any future CPU does implement 32 bit MMIDs as the architecture manuals suggest is recommended. When MMIDs are in use we also make use of GINVT instruction which is available due to the global nature of MMIDs. By executing a sequence of GINVT & SYNC 0x14 instructions we can avoid the overhead of an IPI to each remote CPU in many cases. One complication is that GINVT will invalidate wired entries (in all cases apart from type 0, which targets the entire TLB). In order to avoid GINVT invalidating any wired TLB entries we set up, we make sure to create those entries using a reserved MMID (0) that we never associate with any address space. Also of note is that KVM will require further work in order to support MMIDs & GINVT, since KVM is involved in allocating IDs for guests & in configuring the MMU. That work is not part of this patch, so for now when MMIDs are in use KVM is disabled. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
Add a family of ginvt_* functions making it easy to emit a GINVT instruction to globally invalidate TLB entries. We make use of the _ASM_MACRO infrastructure to support emitting the instructions even if the assembler isn't new enough to support them natively. An associated STYPE_GINV definition & sync_ginv() function are added to emit a sync instruction of type 0x14, which operates as a completion barrier for these new GINVT (and GINVI) instructions. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
When we gain MMID support we'll be storing MMIDs as atomic64_t values and accessing them via atomic64_* functions. This necessitates that we don't use cpu_context() as the left hand side of an assignment, ie. as a modifiable lvalue. In preparation for this introduce a new set_cpu_context() function & replace all assignments with cpu_context() on their left hand side with an equivalent call to set_cpu_context(). To enforce that cpu_context() should not be used for assignments, we rewrite it as a static inline function. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
Introduce a new check_mmu_context() function to check an mm's ASID version & get a new one if it's outdated, and a check_switch_mmu_context() function which additionally sets up the new ASID & page directory. Simplify switch_mm() & various get_new_mmu_context() callsites in MIPS KVM by making use of the new functions, which will help reduce the amount of code that requires modification to gain MMID support. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
In preparation for adding MMID support to get_new_mmu_context() which will increase the size of the function somewhat, move it from asm/mmu_context.h into a C file. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
Split always-included objects to one per line in order to make it easier to modify the list of included objects. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
All 3 variants of local_flush_tlb_mm() are now effectively simple calls to drop_mmu_context(). Remove them and use drop_mmu_context() directly. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
The r4k variant of local_flush_tlb_mm() wraps its call to drop_mmu_context() with a preempt_disable() & preempt_enable() pair, but this is redundant since drop_mmu_context() disables interrupts and from Documentation/preempt-locking.txt: Note that you do not need to explicitly prevent preemption if you are holding any locks or interrupts are disabled, since preemption is implicitly disabled in those cases. Remove the redundant preempt_disable() & preempt_enable() calls. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
drop_mmu_context() is preceded by a comment indicating what happens if the mm provided is currently active on the local CPU. Move that comment into the block that executes in this case, adjusting slightly to reflect its new location. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
If an mm does not have an ASID on the local CPU then drop_mmu_context() is always redundant, since there's no context to "drop". Various callers of drop_mmu_context() check whether the mm has been allocated an ASID before making the call. Move that check into drop_mmu_context() and remove it from callers to simplify them. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
If drop_mmu_context() is called with an mm that is not currently active on the local CPU then there's no need for us to stop & start a hardware page table walker because it can't be fetching entries for the ASID corresponding to the mm we're operating on. Move the htw_stop() & htw_start() calls into the block which we run only if the mm is currently active, in order to avoid the redundant work. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
get_new_mmu_context() accepts a cpu argument, but implicitly assumes that this is always equal to smp_processor_id() by operating on the local CPU's TLB & icache. Remove the cpu argument and have get_new_mmu_context() call smp_processor_id() instead. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
The drop_mmu_context() function accepts a cpu argument, but it implicitly expects that this is always equal to smp_processor_id() by allocating & configuring an ASID on the local CPU when the mm is active on the CPU indicated by the cpu argument. All callers do provide the value of smp_processor_id() to the cpu argument. Remove the redundant argument and have drop_mmu_context() call smp_processor_id() itself, making it clearer that the cpu variable always represents the local CPU. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
MIPS has separate definitions of activate_mm() & switch_mm() which are identical apart from switch_mm() checking that the ASID is valid before acquiring a new one. We know that when activate_mm() is called cpu_context(X, mm) will be zero, and this will never be considered a valid ASID because we never allow the ASID version number to be zero, instead beginning with version 1 using asid_first_version(). Therefore switch_mm() will always allocate a new ASID when called for a new task, meaning that it will behave identically to activate_mm(). Take advantage of this to remove the duplication & define activate_mm() using switch_mm() just like many other architectures do. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-
- 28 Jan, 2019 1 commit
-
-
Aaro Koskinen authored
Delete unused cvmx-smix-defs.h. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org
-