- 30 Oct, 2014 5 commits
-
-
Eric Rannaud authored
The man page for open(2) indicates that when O_CREAT is specified, the 'mode' argument applies only to future accesses to the file: Note that this mode applies only to future accesses of the newly created file; the open() call that creates a read-only file may well return a read/write file descriptor. The man page for open(2) implies that 'mode' is treated identically by O_CREAT and O_TMPFILE. O_TMPFILE, however, behaves differently: int fd = open("/tmp", O_TMPFILE | O_RDWR, 0); assert(fd == -1); assert(errno == EACCES); int fd = open("/tmp", O_TMPFILE | O_RDWR, 0600); assert(fd > 0); For O_CREAT, do_last() sets acc_mode to MAY_OPEN only: if (*opened & FILE_CREATED) { /* Don't check for write permission, don't truncate */ open_flag &= ~O_TRUNC; will_truncate = false; acc_mode = MAY_OPEN; path_to_nameidata(path, nd); goto finish_open_created; } But for O_TMPFILE, do_tmpfile() passes the full op->acc_mode to may_open(). This patch lines up the behavior of O_TMPFILE with O_CREAT. After the inode is created, may_open() is called with acc_mode = MAY_OPEN, in do_tmpfile(). A different, but related glibc bug revealed the discrepancy: https://sourceware.org/bugzilla/show_bug.cgi?id=17523 The glibc lazily loads the 'mode' argument of open() and openat() using va_arg() only if O_CREAT is present in 'flags' (to support both the 2 argument and the 3 argument forms of open; same idea for openat()). However, the glibc ignores the 'mode' argument if O_TMPFILE is in 'flags'. On x86_64, for open(), it magically works anyway, as 'mode' is in RDX when entering open(), and is still in RDX on SYSCALL, which is where the kernel looks for the 3rd argument of a syscall. But openat() is not quite so lucky: 'mode' is in RCX when entering the glibc wrapper for openat(), while the kernel looks for the 4th argument of a syscall in R10. Indeed, the syscall calling convention differs from the regular calling convention in this respect on x86_64. So the kernel sees mode = 0 when trying to use glibc openat() with O_TMPFILE, and fails with EACCES. Signed-off-by:Eric Rannaud <e@nanocritical.com> Acked-by:
Andy Lutomirski <luto@amacapital.net> Cc: stable@vger.kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxLinus Torvalds authored
Pull fbdev fixes from Tomi Valkeinen: - fix fb console option parsing - fixes for OMAPDSS/OMAPFB crashes related to module unloading and device/driver binding & unbinding. - fix for OMAP HDMI PLL locking failing in certain cases - misc minor fixes for atmel lcdfb and OMAP * tag 'fbdev-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: omap: dss: connector-analog-tv: Add missing module device table OMAPDSS: DSI: Fix PLL_SELFEQDCO field width OMAPDSS: fix dispc register dump for preload & mflag OMAPDSS: DISPC: fix mflag offset OMAPDSS: HDMI: fix regsd write OMAPDSS: HDMI: fix PLL GO bit handling OMAPFB: fix releasing overlays OMAPFB: fix overlay disable when freeing resources. OMAPDSS: apply: wait pending updates on manager disable OMAPFB: remove __exit annotation OMAPDSS: set suppress_bind_attrs OMAPFB: add missing MODULE_ALIAS() drivers: video: fbdev: atmel_lcdfb.c: remove unnecessary header video/console: Resolve several shadow warnings fbcon: Fix option parsing control flow in fb_console_setup
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Although the diffstat looks scary, it's just because of the removal of the dead code (s6000), thus it must not affect anything serious. Other than that, all small fixes. The only core fix is zero-clear for a PCM compat ioctl. The rest are driver-specific, bebob, sgtl500, adau1761, intel-sst, ad1889 and a few HD-audio quirks as usual" * tag 'sound-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add workaround for CMI8888 snoop behavior ALSA: pcm: Zero-clear reserved fields of PCM status ioctl in compat mode ALSA: bebob: Uninitialized id returned by saffirepro_both_clk_src_get ALSA: hda/realtek - New SSID for Headset quirk ALSA: ad1889: Fix probable mask then right shift defects ALSA: bebob: fix wrong decoding of clock information for Terratec PHASE 88 Rack FW ALSA: hda/realtek - Update restore default value for ALC283 ALSA: hda/realtek - Update restore default value for ALC282 ASoC: fsl: use strncpy() to prevent copying of over-long names ASoC: adau1761: Fix input PGA volume ASoC: s6000: remove driver ASoC: Intel: HSW/BDW only support S16 and S24 formats. ASoC: sgtl500: Document the required supplies
-
Tomi Valkeinen authored
-
Marek Belisko authored
Without that fix connector-analog-tv driver isn't probed when compiled as module. Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com>
-
- 29 Oct, 2014 30 commits
-
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "21 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits) mm/balloon_compaction: fix deflation when compaction is disabled sh: fix sh770x SCIF memory regions zram: avoid NULL pointer access in concurrent situation mm/slab_common: don't check for duplicate cache names ocfs2: fix d_splice_alias() return code checking mm: rmap: split out page_remove_file_rmap() mm: memcontrol: fix missed end-writeback page accounting mm: page-writeback: inline account_page_dirtied() into single caller lib/bitmap.c: fix undefined shift in __bitmap_shift_{left|right}() drivers/rtc/rtc-bq32k.c: fix register value memory-hotplug: clear pgdat which is allocated by bootmem in try_offline_node() drivers/rtc/rtc-s3c.c: fix initialization failure without rtc source clock kernel/kmod: fix use-after-free of the sub_info structure drivers/rtc/rtc-pm8xxx.c: rework to support pm8941 rtc mm, thp: fix collapsing of hugepages on madvise drivers: of: add return value to of_reserved_mem_device_init() mm: free compound page with correct order gcov: add ARM64 to GCOV_PROFILE_ALL fsnotify: next_i is freed during fsnotify_unmount_inodes. mm/compaction.c: avoid premature range skip in isolate_migratepages_range ... -
Konstantin Khlebnikov authored
If CONFIG_BALLOON_COMPACTION=n balloon_page_insert() does not link pages with balloon and doesn't set PagePrivate flag, as a result balloon_page_dequeue() cannot get any pages because it thinks that all of them are isolated. Without balloon compaction nobody can isolate ballooned pages. It's safe to remove this check. Fixes: d6d86c0a ("mm/balloon_compaction: redesign ballooned pages management"). Signed-off-by:
Konstantin Khlebnikov <k.khlebnikov@samsung.com> Reported-by:
Matt Mullins <mmullins@mmlx.us> Cc: <stable@vger.kernel.org> [3.17] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andriy Skulysh authored
Resources scif1_resources & scif2_resources overlap. Actual SCIF region size is 0x10. This is regression from commit d850acf9 ("sh: Declare SCIF register base and IRQ as resources") Signed-off-by:
Andriy Skulysh <askulysh@gmail.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Weijie Yang authored
There is a rare NULL pointer bug in mem_used_total_show() and mem_used_max_store() in concurrent situation, like this: zram is not initialized, process A is a mem_used_total reader which runs periodically, while process B try to init zram. process A process B access meta, get a NULL value init zram, done init_done() is true access meta->mem_pool, get a NULL pointer BUG This patch fixes this issue. Signed-off-by:
Weijie Yang <weijie.yang@samsung.com> Acked-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
Mikulas Patocka authored
The SLUB cache merges caches with the same size and alignment and there was long standing bug with this behavior: - create the cache named "foo" - create the cache named "bar" (which is merged with "foo") - delete the cache named "foo" (but it stays allocated because "bar" uses it) - create the cache named "foo" again - it fails because the name "foo" is already used That bug was fixed in commit 69461747 ("slab_common: fix the check for duplicate slab names") by not warning on duplicate cache names when the SLUB subsystem is used. Recently, cache merging was implemented the with SLAB subsystem too, in 12220dea ("mm/slab: support slab merge")). Therefore we need stop checking for duplicate names even for the SLAB subsystem. This patch fixes the bug by removing the check. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Richard Weinberger authored
d_splice_alias() can return a valid dentry, NULL or an ERR_PTR. Currently the code checks not for ERR_PTR and will cuase an oops in ocfs2_dentry_attach_lock(). Fix this by using IS_ERR_OR_NULL(). Signed-off-by:
Richard Weinberger <richard@nod.at> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Johannes Weiner authored
page_remove_rmap() has too many branches on PageAnon() and is hard to follow. Move the file part into a separate function. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by:
-
Johannes Weiner authored
Commit 0a31bc97 ("mm: memcontrol: rewrite uncharge API") changed page migration to uncharge the old page right away. The page is locked, unmapped, truncated, and off the LRU, but it could race with writeback ending, which then doesn't unaccount the page properly: test_clear_page_writeback() migration wait_on_page_writeback() TestClearPageWriteback() mem_cgroup_migrate() clear PCG_USED mem_cgroup_update_page_stat() if (PageCgroupUsed(pc)) decrease memcg pages under writeback release pc->mem_cgroup->move_lock The per-page statistics interface is heavily optimized to avoid a function call and a lookup_page_cgroup() in the file unmap fast path, which means it doesn't verify whether a page is still charged before clearing PageWriteback() and it has to do it in the stat update later. Rework it so that it looks up the page's memcg once at the beginning of the transaction and then uses it throughout. The charge will be verified before clearing PageWriteback() and migration can't uncharge the page as long as that is still set. The RCU lock will protect the memcg past uncharge. As far as losing the optimization goes, the following test results are from a microbenchmark that maps, faults, and unmaps a 4GB sparse file three times in a nested fashion, so that there are two negative passes that don't account but still go through the new transaction overhead. There is no actual difference: old: 33.195102545 seconds time elapsed ( +- 0.01% ) new: 33.199231369 seconds time elapsed ( +- 0.03% ) The time spent in page_remove_rmap()'s callees still adds up to the same, but the time spent in the function itself seems reduced: # Children Self Command Shared Object Symbol old: 0.12% 0.11% filemapstress [kernel.kallsyms] [k] page_remove_rmap new: 0.12% 0.08% filemapstress [kernel.kallsyms] [k] page_remove_rmap Signed-off-by:
-
Johannes Weiner authored
A follow-up patch would have changed the call signature. To save the trouble, just fold it instead. Signed-off-by:
-
Jan Kara authored
If __bitmap_shift_left() or __bitmap_shift_right() are asked to shift by a multiple of BITS_PER_LONG, they will try to shift a long value by BITS_PER_LONG bits which is undefined. Change the functions to avoid the undefined shift. Coverity id: 1192175 Coverity id: 1192174 Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Pavel Machek authored
Fix register value in bq32000 trickle charging. Mike reported that I'm using wrong value in one trickle-charging case, and after checking docs, I must admit he's right. Signed-off-by:
Pavel Machek <pavel@denx.de> Reported-by:
Mike Bremford <mike@bfo.com> Signed-off-by:
-
Yasuaki Ishimatsu authored
When hot adding the same memory after hot removal, the following messages are shown: WARNING: CPU: 20 PID: 6 at mm/page_alloc.c:4968 free_area_init_node+0x3fe/0x426() ... Call Trace: dump_stack+0x46/0x58 warn_slowpath_common+0x81/0xa0 warn_slowpath_null+0x1a/0x20 free_area_init_node+0x3fe/0x426 hotadd_new_pgdat+0x90/0x110 add_memory+0xd4/0x200 acpi_memory_device_add+0x1aa/0x289 acpi_bus_attach+0xfd/0x204 acpi_bus_attach+0x178/0x204 acpi_bus_scan+0x6a/0x90 acpi_device_hotplug+0xe8/0x418 acpi_hotplug_work_fn+0x1f/0x2b process_one_work+0x14e/0x3f0 worker_thread+0x11b/0x510 kthread+0xe1/0x100 ret_from_fork+0x7c/0xb0 The detaled explanation is as follows: When hot removing memory, pgdat is set to 0 in try_offline_node(). But if the pgdat is allocated by bootmem allocator, the clearing step is skipped. And when hot adding the same memory, the uninitialized pgdat is reused. But free_area_init_node() checks wether pgdat is set to zero. As a result, free_area_init_node() hits WARN_ON(). This patch clears pgdat which is allocated by bootmem allocator in try_offline_node(). Signed-off-by:Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Zhen <zhenzhang.zhang@huawei.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by:
Toshi Kani <toshi.kani@hp.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Marek Szyprowski authored
Fix unconditional initialization failure on non-exynos3250 SoCs. Commit df9e26d0 ("rtc: s3c: add support for RTC of Exynos3250 SoC") introduced rtc source clock support, but also added initialization failure on SoCs, which doesn't need such clock. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Martin Schwidefsky authored
Found this in the message log on a s390 system: BUG kmalloc-192 (Not tainted): Poison overwritten Disabling lock debugging due to kernel taint INFO: 0x00000000684761f4-0x00000000684761f7. First byte 0xff instead of 0x6b INFO: Allocated in call_usermodehelper_setup+0x70/0x128 age=71 cpu=2 pid=648 __slab_alloc.isra.47.constprop.56+0x5f6/0x658 kmem_cache_alloc_trace+0x106/0x408 call_usermodehelper_setup+0x70/0x128 call_usermodehelper+0x62/0x90 cgroup_release_agent+0x178/0x1c0 process_one_work+0x36e/0x680 worker_thread+0x2f0/0x4f8 kthread+0x10a/0x120 kernel_thread_starter+0x6/0xc kernel_thread_starter+0x0/0xc INFO: Freed in call_usermodehelper_exec+0x110/0x1b8 age=71 cpu=2 pid=648 __slab_free+0x94/0x560 kfree+0x364/0x3e0 call_usermodehelper_exec+0x110/0x1b8 cgroup_release_agent+0x178/0x1c0 process_one_work+0x36e/0x680 worker_thread+0x2f0/0x4f8 kthread+0x10a/0x120 kernel_thread_starter+0x6/0xc kernel_thread_starter+0x0/0xc There is a use-after-free bug on the subprocess_info structure allocated by the user mode helper. In case do_execve() returns with an error ____call_usermodehelper() stores the error code to sub_info->retval, but sub_info can already have been freed. Regarding UMH_NO_WAIT, the sub_info structure can be freed by __call_usermodehelper() before the worker thread returns from do_execve(), allowing memory corruption when do_execve() failed after exec_mmap() is called. Regarding UMH_WAIT_EXEC, the call to umh_complete() allows call_usermodehelper_exec() to continue which then frees sub_info. To fix this race the code needs to make sure that the call to call_usermodehelper_freeinfo() is always done after the last store to sub_info->retval. Signed-off-by:Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by:
Oleg Nesterov <oleg@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
-
Stanimir Varbanov authored
Adds support for RTC device inside PM8941 PMIC. The RTC in this PMIC have two register spaces. Thus the rtc-pm8xxx is slightly reworked to reflect these differences. The register set for different PMIC chips are selected on DT compatible string base. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: simplify and fix locking in pm8xxx_rtc_set_time()] Signed-off-by:
Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Josh Cartwright <joshc@codeaurora.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David Rientjes authored
If an anonymous mapping is not allowed to fault thp memory and then madvise(MADV_HUGEPAGE) is used after fault, khugepaged will never collapse this memory into thp memory. This occurs because the madvise(2) handler for thp, hugepage_madvise(), clears VM_NOHUGEPAGE on the stack and it isn't stored in vma->vm_flags until the final action of madvise_behavior(). This causes the khugepaged_enter_vma_merge() to be a no-op in hugepage_madvise() when the vma had previously had VM_NOHUGEPAGE set. Fix this by passing the correct vma flags to the khugepaged mm slot handler. There's no chance khugepaged can run on this vma until after madvise_behavior() returns since we hold mm->mmap_sem. It would be possible to clear VM_NOHUGEPAGE directly from vma->vm_flags in hugepage_advise(), but I didn't want to introduce special case behavior into madvise_behavior(). I think it's best to just let it always set vma->vm_flags itself. Signed-off-by:
David Rientjes <rientjes@google.com> Reported-by:
Suleiman Souhlal <suleiman@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Marek Szyprowski authored
Driver calling of_reserved_mem_device_init() might be interested if the initialization has been successful or not, so add support for returning error code. This fixes a build warining caused by commit 7bfa5ab6 ("drivers: dma-coherent: add initialization from device tree"), which has been merged without this change and without fixing function return value. Fixes: 7bfa5ab6 ("drivers: dma-coherent: add initialization from device tree") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Josh Cartwright <joshc@codeaurora.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Yu Zhao authored
Compound page should be freed by put_page() or free_pages() with correct order. Not doing so will cause tail pages leaked. The compound order can be obtained by compound_order() or use HPAGE_PMD_ORDER in our case. Some people would argue the latter is faster but I prefer the former which is more general. This bug was observed not just on our servers (the worst case we saw is 11G leaked on a 48G machine) but also on our workstations running Ubuntu based distro. $ cat /proc/vmstat | grep thp_zero_page_alloc thp_zero_page_alloc 55 thp_zero_page_alloc_failed 0 This means there is (thp_zero_page_alloc - 1) * (2M - 4K) memory leaked. Fixes: 97ae1749 ("thp: implement refcounting for huge zero page") Signed-off-by:
Yu Zhao <yuzhao@google.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: David Rientjes <rientjes@google.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: <stable@vger.kernel.org> [3.8+] Signed-off-by:
-
Riku Voipio authored
Following up the arm testing of gcov, turns out gcov on ARM64 works fine as well. Only change needed is adding ARM64 to Kconfig depends. Tested with qemu and mach-virt Signed-off-by:
Riku Voipio <riku.voipio@linaro.org> Acked-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
-
Jerry Hoemann authored
During file system stress testing on 3.10 and 3.12 based kernels, the umount command occasionally hung in fsnotify_unmount_inodes in the section of code: spin_lock(&inode->i_lock); if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) { spin_unlock(&inode->i_lock); continue; } As this section of code holds the global inode_sb_list_lock, eventually the system hangs trying to acquire the lock. Multiple crash dumps showed: The inode->i_state == 0x60 and i_count == 0 and i_sb_list would point back at itself. As this is not the value of list upon entry to the function, the kernel never exits the loop. To help narrow down problem, the call to list_del_init in inode_sb_list_del was changed to list_del. This poisons the pointers in the i_sb_list and causes a kernel to panic if it transverse a freed inode. Subsequent stress testing paniced in fsnotify_unmount_inodes at the bottom of the list_for_each_entry_safe loop showing next_i had become free. We believe the root cause of the problem is that next_i is being freed during the window of time that the list_for_each_entry_safe loop temporarily releases inode_sb_list_lock to call fsnotify and fsnotify_inode_delete. The code in fsnotify_unmount_inodes attempts to prevent the freeing of inode and next_i by calling __iget. However, the code doesn't do the __iget call on next_i if i_count == 0 or if i_state & (I_FREEING | I_WILL_FREE) The patch addresses this issue by advancing next_i in the above two cases until we either find a next_i which we can __iget or we reach the end of the list. This makes the handling of next_i more closely match the handling of the variable "inode." The time to reproduce the hang is highly variable (from hours to days.) We ran the stress test on a 3.10 kernel with the proposed patch for a week without failure. During list_for_each_entry_safe, next_i is becoming free causing the loop to never terminate. Advance next_i in those cases where __iget is not done. Signed-off-by:Jerry Hoemann <jerry.hoemann@hp.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Ken Helias <kenhelias@firemail.de> Signed-off-by:
-
Joonsoo Kim authored
Commit edc2ca61 ("mm, compaction: move pageblock checks up from isolate_migratepages_range()") commonizes isolate_migratepages variants and make them use isolate_migratepages_block(). isolate_migratepages_block() could stop the execution when enough pages are isolated, but, there is no code in isolate_migratepages_range() to handle this case. In the result, even if isolate_migratepages_block() returns prematurely without checking all pages in the range, isolate_migratepages_block() is called repeately on the following pageblock and some pages in the previous range are skipped to check. Then, CMA is failed frequently due to this fact. To fix this problem, this patch let isolate_migratepages_range() know the situation that enough pages are isolated and stop the isolation in that case. Note that isolate_migratepages() has no such problem, because, it always stops the isolation after just one call of isolate_migratepages_block(). Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by:
-
Wang Nan authored
Commit ff7ee93f ("cgroup/kmemleak: Annotate alloc_page() for cgroup allocations") introduces kmemleak_alloc() for alloc_page_cgroup(), but corresponding kmemleak_free() is missing, which makes kmemleak be wrongly disabled after memory offlining. Log is pasted at the end of this commit message. This patch add kmemleak_free() into free_page_cgroup(). During page offlining, this patch removes corresponding entries in kmemleak rbtree. After that, the freed memory can be allocated again by other subsystems without killing kmemleak. bash # for x in 1 2 3 4; do echo offline > /sys/devices/system/memory/memory$x/state ; sleep 1; done ; dmesg | grep leak Offlined Pages 32768 kmemleak: Cannot insert 0xffff880016969000 into the object search tree (overlaps existing) CPU: 0 PID: 412 Comm: sleep Not tainted 3.17.0-rc5+ #86 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x46/0x58 create_object+0x266/0x2c0 kmemleak_alloc+0x26/0x50 kmem_cache_alloc+0xd3/0x160 __sigqueue_alloc+0x49/0xd0 __send_signal+0xcb/0x410 send_signal+0x45/0x90 __group_send_sig_info+0x13/0x20 do_notify_parent+0x1bb/0x260 do_exit+0x767/0xa40 do_group_exit+0x44/0xa0 SyS_exit_group+0x17/0x20 system_call_fastpath+0x16/0x1b kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff880016900000 (size 524288): kmemleak: comm "swapper/0", pid 0, jiffies 4294667296 kmemleak: min_count = 0 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: log_early+0x63/0x77 kmemleak_alloc+0x4b/0x50 init_section_page_cgroup+0x7f/0xf5 page_cgroup_init+0xc5/0xd0 start_kernel+0x333/0x408 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0xf5/0xfc Fixes: ff7ee93f (cgroup/kmemleak: Annotate alloc_page() for cgroup allocations) Signed-off-by:
Wang Nan <wangnan0@huawei.com> Acked-by:
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block layer fixes from Jens Axboe: "A small collection of fixes for the current kernel. This contains: - Two error handling fixes from Jan Kara. One for null_blk on failure to add a device, and the other for the block/scsi_ioctl SCSI_IOCTL_SEND_COMMAND fixing up the error jump point. - A commit added in the merge window for the bio integrity bits unfortunately disabled merging for all requests if CONFIG_BLK_DEV_INTEGRITY wasn't set. Reverse the logic, so that integrity checking wont disallow merges when not enabled. - A fix from Ming Lei for merging and generating too many segments. This caused a BUG in virtio_blk. - Two error handling printk() fixups from Robert Elliott, improving the information given when we rate limit. - Error handling fixup on elevator_init() failure from Sudip Mukherjee. - A fix from Tony Battersby, fixing up a memory leak in the scatterlist handling with scsi-mq" * 'for-linus' of git://git.kernel.dk/linux-block: block: Fix merge logic when CONFIG_BLK_DEV_INTEGRITY is not defined lib/scatterlist: fix memory leak with scsi-mq block: fix wrong error return in elevator_init() scsi: Fix error handling in SCSI_IOCTL_SEND_COMMAND null_blk: Cleanup error recovery in null_add_dev() blk-merge: recaculate segment if it isn't less than max segments fs: clarify rate limit suppressed buffer I/O errors fs: merge I/O error prints into one line -
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - workarounds for a couple of misbehaving Elan Touchscreens, by Adel Gadllah - fix for TransducerSerialNumber field implementation, by Jason Gerecke - a couple of new HID usages (added by HUT), by Olivier Gay * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: input: Fix TransducerSerialNumber implementation HID: add keyboard input assist hid usages HID: usbhid: enable always-poll quirk for Elan Touchscreen 016f HID: usbhid: enable always-poll quirk for Elan Touchscreen 009b
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull Integrity subsystem fix from James Morris: "These changes fix a bug in xattr handling, where the evm and ima inode_setxattr() functions do not check for empty xattrs being passed from userspace (leading to user-triggerable null pointer dereferences)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: evm: check xattr value length and type in evm_inode_setxattr() ima: check xattr value length and type in the ima_inode_setxattr()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linuxLinus Torvalds authored
Pull powerpc updates from Michael Ellerman: "There's some bug fixes or cleanups to facilitate fixes, a MAINTAINERS update, and a new syscall (bpf)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/numa: ensure per-cpu NUMA mappings are correct on topology update powerpc/numa: use cached value of update->cpu in update_cpu_topology cxl: Fix PSL error due to duplicate segment table entries powerpc/mm: Use appropriate ESID mask in copro_calculate_slb() cxl: Refactor cxl_load_segment() and find_free_sste() cxl: Disable secondary hash in segment table Revert "powerpc/powernv: Fix endian bug in LPC bus debugfs accessors" powernv: Use _GLOBAL_TOC for opal wrappers powerpc: Wire up sys_bpf() syscall MAINTAINERS: nx-842 driver maintainer change powerpc/mm: Remove redundant #if case powerpc/mm: Fix build error with hugetlfs disabled
-
Takashi Iwai authored
CMI8888 shows the stuttering playback when the snooping is disabled on the audio buffer. Meanwhile, we've got reports that CORB/RIRB doesn't work in the snooped mode. So, as a compromise, disable the snoop only for CORB/RIRB and enable the snoop for the stream buffers. The resultant patch became a bit ugly, unfortunately, but we still can live with it. Reported-and-tested-by:
Geoffrey McRae <geoff@spacevs.com> Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Jason Gerecke authored
The commit which introduced TransducerSerialNumber (368c9664) is missing two crucial implementation details. Firstly, the commit does not set the type/code/bit/max fields as expected later down the code which can cause the driver to crash when a tablet with this usage is connected. Secondly, the call to 'set_bit' causes MSC_PULSELED to be sent instead of the expected MSC_SERIAL. This commit addreses both issues. Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz>
-
James Morris authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into for-linus
-
Martin K. Petersen authored
Commit 4eaf99be switched to returning bool and as a result reversed the logic of the integrity merge checks. However, the empty stubs used when the block integrity code is compiled out were still returning 0. Make these stubs return "true". Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Reported-by:
Michael L. Semon <mlsemon35@gmail.com> Tested-by:
Jens Axboe <axboe@fb.com>
-
- 28 Oct, 2014 5 commits
-
-
Nishanth Aravamudan authored
We received a report of warning in kernel/sched/core.c where the sched group was NULL on an LPAR after a topology update. This seems to occur because after the topology update has moved the CPUs, cpu_to_node is returning the old value still, which ends up breaking the consistency of the NUMA topology in the per-cpu maps. Ensure that we update the per-cpu fields when we re-map CPUs. Signed-off-by:
Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Nishanth Aravamudan authored
There isn't any need to keep referring to update->cpu, as we've already checked cpu == update->cpu at this point. Signed-off-by:
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull two nfsd fixes from Bruce Fields: "One regression from the 3.16 xdr rewrite, one an older bug exposed by a separate bug in the client's new SEEK code" * 'for-3.18' of git://linux-nfs.org/~bfields/linux: nfsd4: fix crash on unknown operation number nfsd4: fix response size estimation for OP_SEQUENCE
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace trampoline accounting fixes from Steven Rostedt: "Adding the new code for 3.19, I discovered a couple of minor bugs with the accounting of the ftrace_ops trampoline logic. One was that the old hash was not updated before calling the modify code for an ftrace_ops. The second bug was what let the first bug go unnoticed, as the update would check the current hash for all ftrace_ops (where it should only check the old hash for modified ones). This let things work when only one ftrace_ops was registered to a function, but could break if more than one was registered depending on the order of the look ups. The worse thing that can happen if this bug triggers is that the ftrace self checks would find an anomaly and shut itself down" * tag 'trace-fixes-v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix checking of trampoline ftrace_ops in finding trampoline ftrace: Set ops->old_hash on modifying what an ops hooks to
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A couple of ARM fixes. We fix some printk formats for ptrdiff_t quantities which cause GCC 4.9 to complain, and we also blacklist known buggy GCC 4.8.x compilers as their miscompilation is serious enough to cause filesystem corruption, even through many distros have fixed their versions" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: fix some printk formats ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854
-
