- 30 Jan, 2008 40 commits
-
-
Roland McGrath authored
This reorders the code in the 32-bit vDSO images to put the signal trampolines first and __kernel_vsyscall after them. The order does not matter to userland, it just uses what AT_SYSINFO or e_entry says. Since the signal trampolines are the same size in both versions of the vDSO, putting them first is the simplest way to get the addresses to line up. This makes it work to use a more compact layout for the vDSO. Signed-off-by:
Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Roland McGrath authored
This removes all the old vsyscall code from arch/x86/ia32/ that is no longer used because arch/x86/vdso/ code has replaced it. Signed-off-by:
-
Roland McGrath authored
This makes x86_64's ia32 emulation support share the sources used in the 32-bit kernel for the 32-bit vDSO and much of its setup code. The 32-bit vDSO mapping now behaves the same on x86_64 as on native 32-bit. The abi.syscall32 sysctl on x86_64 now takes the same values that vm.vdso_enabled takes on the 32-bit kernel. That is, 1 means a randomized vDSO location, 2 means the fixed old address. The CONFIG_COMPAT_VDSO option is now available to make this the default setting, the same meaning it has for the 32-bit kernel. (This does not affect the 64-bit vDSO.) The argument vdso32=[012] can be used on both 32-bit and 64-bit kernels to set this paramter at boot time. The vdso=[012] argument still does this same thing on the 32-bit kernel. Signed-off-by:
-
Roland McGrath authored
This puts the syscall version of the 32-bit vDSO in arch/x86/vdso/vdso32/ for 64-bit IA32 support. This is not used yet, but it paves the way for consolidating the 32-bit vDSO source and build logic all in one place. Signed-off-by:
-
Roland McGrath authored
This changes the 64-bit kernel's support for the 32-bit sysenter instruction to use stored fields rather than constants for the user-mode return address, as the 32-bit kernel does. This adds a sysenter_return field to struct thread_info, as 32-bit has. There is no observable effect from this yet. It makes the assembly code independent of the 32-bit vDSO mapping address, paving the way for making the vDSO address vary as it does on the 32-bit kernel. [ akpm@linux-foundation.org: build fix on !CONFIG_IA32_EMULATION ] Signed-off-by:
-
Roland McGrath authored
This harmonizes the name for the entry point from the 32-bit sysenter instruction across 32-bit and 64-bit kernels. Signed-off-by:
-
Roland McGrath authored
This moves arch/x86/kernel/sysenter_32.c to arch/x86/vdso/vdso32-setup.c, keeping all the code relating only to vDSO magic in the vdso/ subdirectory. This is a pure renaming, but it paves the way to consolidating the code for dealing with 32-bit vDSOs across CONFIG_X86_32 and CONFIG_IA32_EMULATION. Signed-off-by:
-
Roland McGrath authored
This enables 'make vdso_install' for i386 as on x86_64 and powerpc. Signed-off-by:
-
Roland McGrath authored
This updates the exceptions for absolute relocs for the new symbol name convention used for symbols extracted from the vDSO images. Signed-off-by:
-
Roland McGrath authored
This makes the i386 kernel use the new vDSO build in arch/x86/vdso/vdso32/ to replace the old one from arch/x86/kernel/. Signed-off-by:
-
Roland McGrath authored
This builds the 32-bit vDSO images in the arch/x86/vdso subdirectory. Nothing uses the images yet, but this paves the way for consolidating the vDSO build logic all in one place. The new images use a linker script sharing the layout parts from vdso-layout.lds.S with the 64-bit vDSO. A new vdso32-syms.lds is generated in the style of vdso-syms.lds. Signed-off-by:
-
Roland McGrath authored
This moves the i386 vDSO sources into arch/x86/vdso/vdso32/, a new directory. This patch is a pure renaming, but paves the way for consolidating the vDSO build logic. Signed-off-by:
-
Roland McGrath authored
This change harmonizes the asm-offsets macros used in the 32-bit vDSO across 32-bit and 64-bit builds. It's a purely cosmetic change for now, but it paves the way for consolidating the 32-bit vDSO builds. Signed-off-by:
-
Roland McGrath authored
This revamps the vDSO linker script to lay things out with the best packing of the data and good, separate alignment of the code. The rigid layout using VDSO_TEXT_OFFSET no longer matters to the kernel. I've moved the layout parts of the linker script into a new include file, vdso-layout.lds.S; this is in preparation for sharing the script for the 32-bit vDSO builds too. Signed-off-by:
-
Roland McGrath authored
Get rid of vdso-syms.o from the kernel link. We don't need it any more. Signed-off-by:
-
Roland McGrath authored
This patch changes the kernel's references to addresses in the vDSO image to be based on the symbols defined by vdso-syms.lds instead of the old vdso-syms.o symbols. This is all wrapped up in a macro defined by the new asm-x86/vdso.h header; that's the only place in the kernel source that has to know the details of the scheme for getting vDSO symbol values. Signed-off-by:
-
Roland McGrath authored
This patch adds a new way of extracting symbols from the built vDSO image. This is much simpler and less fragile than using ld -R; it removes the need to control the DSO layout quite so exactly. I was clearly unduly distracted by clever ld uses when I did the original vDSO implementation. Signed-off-by:
-
Jiri Kosina authored
Randomize the location of the heap (brk) for i386 and x86_64. The range is randomized in the range starting at current brk location up to 0x02000000 offset for both architectures. This, together with pie-executable-randomization.patch and pie-executable-randomization-fix.patch, should make the address space randomization on i386 and x86_64 complete. Arjan says: This is known to break older versions of some emacs variants, whose dumper code assumed that the last variable declared in the program is equal to the start of the dynamically allocated memory region. (The dumper is the code where emacs effectively dumps core at the end of it's compilation stage; this coredump is then loaded as the main program during normal use) iirc this was 5 years or so; we found this way back when I was at RH and we first did the security stuff there (including this brk randomization). It wasn't all variants of emacs, and it got fixed as a result (I vaguely remember that emacs already had code to deal with it for other archs/oses, just ifdeffed wrongly). It's a rare and wrong assumption as a general thing, just on x86 it mostly happened to be true (but to be honest, it'll break too if gcc does something fancy or if the linker does a non-standard order). Still its something we should at least document. Note 2: afaik it only broke the emacs *build*. I'm not 100% sure about that (it IS 5 years ago) though. [ akpm@linux-foundation.org: deuglification ] Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Jakub Jelinek <jakub@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Robert Richter authored
Also macro definitions in apicdef.h has been updated. Signed-off-by:
-
Andi Kleen authored
Earlier patch added IO APIC setup into local APIC setup. This caused modpost warnings. Fix them by untangling setup_local_APIC() and splitting it into smaller functions. The IO APIC initialization is only called for the BP init. Also removed some outdated debugging code and minor cleanup. [ tglx: arch/x86 adaptation ] Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Yinghai Lu authored
We shoud use core id bits instead of max cores, in case later with AMD downcores Quad core Opteron. [ tglx: arch/x86 adaptation ] Signed-off-by:
Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by:
-
Yinghai Lu authored
We need to store core id bits to cpuinfo_x86 in early_identify_cpu. So we use it to create acpiid_to_node array in k8topolgy.c Signed-off-by:
-
Adrian Bunk authored
Contrary to the comment "newer gccs do it by default", newer gcc versions default to -maccumulate-outgoing-args only with CONFIG_CC_OPTIMIZE_FOR_SIZE=n, and then only with some CPU settings. Measured with an i386 defconfig, gcc 4.2.1 and kernel 2.6.23-rc1 ("orig" is the plain kernel, "changed is with -maccumulate-outgoing-args removed): $ ls -la vmlinux* -rwxrwxr-x 1 bunk bunk 6269713 2007-07-24 22:19 vmlinux.changed -rwxrwxr-x 1 bunk bunk 6425361 2007-07-24 22:19 vmlinux.orig $ size vmlinux.* text data bss dec hex filename 4493465 504108 614400 5611973 55a1c5 vmlinux.changed 4646160 504108 614400 5764668 57f63c vmlinux.orig $ That's a 2.5% size increase that does for sure hurt small systems. If the stack unwinder ever comes back and needs this as indicated in the comment, adding it to the cflags when the user enabled the unwinder should be a better option. [ tglx: arch/x86 adaptation ] Signed-off-by:Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Yinghai Lu authored
4 socket quad core, 8 socket quad core will do apic ID lifting for BSP. But io-apic regs for ExtINT still use 0 as dest. so when we enable apic error vector in BSP, we will get one APIC error. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/4 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 enabled ExtINT on CPU#0 ESR value after enabling vector: 00000000, after 0000000c APIC error on CPU0: 0c(08) ENABLING IO-APIC IRQs Synchronizing Arb IDs. So move enable_IO_APIC from setup_IO_APIC into setup_local_APIC and call it before enabling the ACPI error vector. [ tglx: arch/x86 adaptation ] Signed-off-by:
Yinghai Lu <yinghai.lu@sun.com> Signed-off-by:
-
Thomas Gleixner authored
Clean it up before applying more patches to it. Signed-off-by:
-
Steven Rostedt authored
So this patch simply removes the "thread" from asm-offsets.c since I can't find an owner for it. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Dave Jones authored
Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Reorder defines and do white space / coding style cleanups to get a readable diff. Also convert the macros to inline functions. Move the pci related inlines to pci.h Signed-off-by:
-
Thomas Gleixner authored
Use the 64bit numa variable names for numa32 as well. Signed-off-by:
-
Thomas Gleixner authored
Using a variable name, which is the same as a macro name is not really smart. Change the variable names and fixup all users. Signed-off-by:
-
Thomas Gleixner authored
Clean it up before applying more patches. Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Signed-off-by:
-
Thomas Gleixner authored
Merge the files. [ mingo@elte.hu: build fix ] Signed-off-by:
-
Thomas Gleixner authored
Fix coding style to get a readable diff Signed-off-by:
-
Thomas Gleixner authored
Bring the smp.h variants into sync to prepare merging and paravirt support. Signed-off-by:
-
Thomas Gleixner authored
The delta is now minimal. Merge them Signed-off-by:
-
