Skip to content

L
linux
Switch branch/tag
  1. 18 Jun, 2020 4 commits
    • Tiezhu Yang's avatar
      perf build: Fix error message when asking for -fsanitize=address without required libraries · 6a1515c9
      Tiezhu Yang authored 
      When build perf with ASan or UBSan, if libasan or libubsan can not find,
the feature-glibc is 0 and there exists the following error log which is
wrong, because we can find gnu/libc-version.h in /usr/include,
glibc-devel is also installed.

  [yangtiezhu@linux perf]$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address'
    BUILD:   Doing 'make -j4' parallel build
    HOSTCC   fixdep.o
    HOSTLD   fixdep-in.o
    LINK     fixdep
  <stdin>:1:0: warning: -fsanitize=address and -fsanitize=kernel-address are not supported for this target
  <stdin>:1:0: warning: -fsanitize=address not supported for this target

  Auto-detecting system features:
  ...                         dwarf: [ OFF ]
  ...            dwarf_getlocations: [ OFF ]
  ...                         glibc: [ OFF ]
  ...                          gtk2: [ OFF ]
  ...                      libaudit: [ OFF ]
  ...                        libbfd: [ OFF ]
  ...                        libcap: [ OFF ]
  ...                        libelf: [ OFF ]
  ...                       libnuma: [ OFF ]
  ...        numa_num_possible_cpus: [ OFF ]
  ...                       libperl: [ OFF ]
  ...                     libpython: [ OFF ]
  ...                     libcrypto: [ OFF ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ OFF ]
  ...                          zlib: [ OFF ]
  ...                          lzma: [ OFF ]
  ...                     get_cpuid: [ OFF ]
  ...                           bpf: [ OFF ]
  ...                        libaio: [ OFF ]
  ...                       libzstd: [ OFF ]
  ...        disassembler-four-args: [ OFF ]

  Makefile.config:393: *** No gnu/libc-version.h found, please install glibc-dev[el].  Stop.
  Makefile.perf:224: recipe for target 'sub-make' failed
  make[1]: *** [sub-make] Error 2
  Makefile:69: recipe for target 'all' failed
  make: *** [all] Error 2
  [yangtiezhu@linux perf]$ ls /usr/include/gnu/libc-version.h
  /usr/include/gnu/libc-version.h

After install libasan and libubsan, the feature-glibc is 1 and the build
process is success, so the cause is related with libasan or libubsan, we
should check them and print an error log to reflect the reality.

Committer testing:

  $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
  $ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j12' parallel build
    HOSTCC   /tmp/build/perf/fixdep.o
    HOSTLD   /tmp/build/perf/fixdep-in.o
    LINK     /tmp/build/perf/fixdep

  Auto-detecting system features:
  ...                         dwarf: [ OFF ]
  ...            dwarf_getlocations: [ OFF ]
  ...                         glibc: [ OFF ]
  ...                          gtk2: [ OFF ]
  ...                        libbfd: [ OFF ]
  ...                        libcap: [ OFF ]
  ...                        libelf: [ OFF ]
  ...                       libnuma: [ OFF ]
  ...        numa_num_possible_cpus: [ OFF ]
  ...                       libperl: [ OFF ]
  ...                     libpython: [ OFF ]
  ...                     libcrypto: [ OFF ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ OFF ]
  ...                          zlib: [ OFF ]
  ...                          lzma: [ OFF ]
  ...                     get_cpuid: [ OFF ]
  ...                           bpf: [ OFF ]
  ...                        libaio: [ OFF ]
  ...                       libzstd: [ OFF ]
  ...        disassembler-four-args: [ OFF ]

  Makefile.config:401: *** No libasan found, please install libasan.  Stop.
  make[1]: *** [Makefile.perf:231: sub-make] Error 2
  make: *** [Makefile:70: all] Error 2
  make: Leaving directory '/home/acme/git/perf/tools/perf'
  $
  $
  $ sudo dnf install libasan
  <SNIP>
  Installed:
    libasan-9.3.1-2.fc31.x86_64
  $
  $
  $ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j12' parallel build

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...            dwarf_getlocations: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libcap: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...        numa_num_possible_cpus: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                     libcrypto: [ on  ]
  ...                     libunwind: [ on  ]
  ...            libdw-dwarf-unwind: [ on  ]
  ...                          zlib: [ on  ]
  ...                          lzma: [ on  ]
  ...                     get_cpuid: [ on  ]
  ...                           bpf: [ on  ]
  ...                        libaio: [ on  ]
  ...                       libzstd: [ on  ]
  ...        disassembler-four-args: [ on  ]
   <SNIP>
    CC       /tmp/build/perf/util/pmu-flex.o
    FLEX     /tmp/build/perf/util/expr-flex.c
    CC       /tmp/build/perf/util/expr-bison.o
    CC       /tmp/build/perf/util/expr.o
    CC       /tmp/build/perf/util/expr-flex.o
    CC       /tmp/build/perf/util/parse-events-flex.o
    CC       /tmp/build/perf/util/parse-events.o
    LD       /tmp/build/perf/util/intel-pt-decoder/perf-in.o
    LD       /tmp/build/perf/util/perf-in.o
    LD       /tmp/build/perf/perf-in.o
    LINK     /tmp/build/perf/perf
  <SNIP>
    INSTALL  python-scripts
    INSTALL  perf_completion-script
    INSTALL  perf-tip
  make: Leaving directory '/home/acme/git/perf/tools/perf'
  $ ldd ~/bin/perf | grep asan
  	libasan.so.5 => /lib64/libasan.so.5 (0x00007f0904164000)
  $

And if we rebuild without -fsanitize-address:

  $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
  $ make O=/tmp/build/perf -C tools/perf/ install-bin
  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j12' parallel build
    HOSTCC   /tmp/build/perf/fixdep.o
    HOSTLD   /tmp/build/perf/fixdep-in.o
    LINK     /tmp/build/perf/fixdep

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...            dwarf_getlocations: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libcap: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...        numa_num_possible_cpus: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                     libcrypto: [ on  ]
  ...                     libunwind: [ on  ]
  ...            libdw-dwarf-unwind: [ on  ]
  ...                          zlib: [ on  ]
  ...                          lzma: [ on  ]
  ...                     get_cpuid: [ on  ]
  ...                           bpf: [ on  ]
  ...                        libaio: [ on  ]
  ...                       libzstd: [ on  ]
  ...        disassembler-four-args: [ on  ]

    GEN      /tmp/build/perf/common-cmds.h
    CC       /tmp/build/perf/exec-cmd.o
  <SNIP>
    INSTALL  perf_completion-script
    INSTALL  perf-tip
  make: Leaving directory '/home/acme/git/perf/tools/perf'
  $ ldd ~/bin/perf | grep asan
  $
Signed-off-by: default avatarTiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: default avatarJiri Olsa <jolsa@redhat.com>
Tested-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tiezhu yang <yangtiezhu@loongson.cn>
Cc: xuefeng li <lixuefeng@loongson.cn>
Link: http://lore.kernel.org/lkml/1592445961-28044-1-git-send-email-yangtiezhu@loongson.cnSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      6a1515c9
    • Steven Rostedt (VMware)'s avatar
      tools lib traceevent: Add handler for __builtin_expect() · 1b20d949
      Steven Rostedt (VMware) authored 
      In order to move pointer checks like IS_ERR_VALUE() out of the hotpath
and into the reader path of a trace event, user space tools need to be
able to parse that. IS_ERR_VALUE() is defined as:

 #define IS_ERR_VALUE() unlikely((unsigned long)(void *)(x) >= (unsigned long)-MAX_ERRNO)

Which eventually turns into:

  __builtin_expect(!!((unsigned long)(void *)(x) >= (unsigned long)-4095), 0)

Now the traceevent parser can handle most of that except for the
__builtin_expect(), which needs to be added.

Link: https://lore.kernel.org/linux-mm/20200320055823.27089-3-jaewon31.kim@samsung.com/Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jaewon Kim <jaewon31.kim@samsung.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200324200956.821799393@goodmis.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      1b20d949
    • Steven Rostedt (VMware)'s avatar
      tools lib traceevent: Handle __attribute__((user)) in field names · 74621d92
      Steven Rostedt (VMware) authored 
      Commit c61f13ea ("gcc-plugins: Add structleak for more stack
initialization") added "__attribute__((user))" to the user when
stackleak detector is enabled. This now appears in the field format of
system call trace events for system calls that have user buffers. The
"__attribute__((user))" breaks the parsing in libtraceevent. That needs
to be handled.
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jaewon Kim <jaewon31.kim@samsung.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org
Cc: linux-trace-devel@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200324200956.663647256@goodmis.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      74621d92
    • Steven Rostedt (VMware)'s avatar
      tools lib traceevent: Add append() function helper for appending strings · 27d4d336
      Steven Rostedt (VMware) authored 
      There's several locations that open code realloc and strcat() to append
text to strings. Add an append() function that takes a delimiter and a
string to append to another string.
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jaewon Lim <jaewon31.kim@samsung.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: linux-mm@kvack.org
Cc: linux-trace-devel@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lore.kernel.org/lkml/20200324200956.515118403@goodmis.orgSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      27d4d336
  3. 17 Jun, 2020 10 commits
    • Arnaldo Carvalho de Melo's avatar
      tools headers UAPI: Sync linux/fs.h with the kernel sources · 0e093c77
      Arnaldo Carvalho de Melo authored 
      To pick the changes from:

  b383a73f ("fs/ext4: Introduce DAX inode flag")

And silence this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
  diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h

It causes various beautifiers for things like fspick, fsmount, etc (see
below) to get rebuilt, but this specific change doesn't make 'perf
trace' be capable of decoding anything new, as we still don't decode
what comes from ioctls, just its cmds.

Details about the update:

  $ cp include/uapi/linux/fs.h tools/include/uapi/linux/fs.h
  $ git diff
  diff --git a/tools/include/uapi/linux/fs.h b/tools/include/uapi/linux/fs.h
  index 379a612f8f1d..f44eb0a04afd 100644
  --- a/tools/include/uapi/linux/fs.h
  +++ b/tools/include/uapi/linux/fs.h
  @@ -262,6 +262,7 @@ struct fsxattr {
   #define FS_EA_INODE_FL                 0x00200000 /* Inode used for large EA */
   #define FS_EOFBLOCKS_FL                        0x00400000 /* Reserved for ext4 */
   #define FS_NOCOW_FL                    0x00800000 /* Do not cow file */
  +#define FS_DAX_FL                      0x02000000 /* Inode is DAX */
   #define FS_INLINE_DATA_FL              0x10000000 /* Reserved for ext4 */
   #define FS_PROJINHERIT_FL              0x20000000 /* Create with parents projid */
   #define FS_CASEFOLD_FL                 0x40000000 /* Folder is case insensitive */
  $ m
  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j8' parallel build
    INSTALL  GTK UI
    CC       /tmp/build/perf/builtin-trace.o
    DESCEND  plugins
    CC       /tmp/build/perf/trace/beauty/fsmount.o
    CC       /tmp/build/perf/trace/beauty/fspick.o
    CC       /tmp/build/perf/trace/beauty/mount_flags.o
    CC       /tmp/build/perf/trace/beauty/move_mount.o
    CC       /tmp/build/perf/trace/beauty/renameat.o
    CC       /tmp/build/perf/trace/beauty/sync_file_range.o
    INSTALL  trace_plugins
    LD       /tmp/build/perf/trace/beauty/perf-in.o
    LD       /tmp/build/perf/perf-in.o
    LINK     /tmp/build/perf/perf
  <SNIP>

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      0e093c77
    • Arnaldo Carvalho de Melo's avatar
      tools include UAPI: Sync linux/vhost.h with the kernel sources · f64925c1
      Arnaldo Carvalho de Melo authored 
      To get the changes in:

  776f3950 ("vhost_vdpa: Support config interrupt in vdpa")

Silencing this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
  diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h

This automatically picks the new ioctl introduced in the above patch,
making tools such as 'perf trace' aware of them and possibly allowing to
use the strings in filters, etc:

  # perf trace -e ioctl --pid 7951
  <SNIP>
     0.178 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
     0.194 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
     0.209 ( 0.010 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
     0.224 (249.413 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   249.660 ( 0.011 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   249.675 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   249.686 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   249.697 ( 0.008 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   249.709 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   249.720 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   249.730 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   249.740 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   249.752 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   249.762 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   249.772 ( 0.007 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   249.782 (120.138 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   370.201 ( 0.039 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e1420) = 0
   370.254 ( 0.052 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   370.575 ( 0.365 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   370.973 ( 0.028 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   371.015 ( 0.037 ms): CPU 0/KVM/8023 ioctl(fd: 14, cmd: KVM_RUN) = 0
   371.071 ( 0.009 ms): CPU 0/KVM/8023 ioctl(fd: 12, cmd: KVM_IRQ_LINE_STATUS, arg: 0x7f744f9e14b0) = 0
  <SNIP>
  #

Details about the update:

  $ diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
  --- tools/include/uapi/linux/vhost.h	2020-04-16 13:19:12.056763843 -0300
  +++ include/uapi/linux/vhost.h	2020-06-17 10:04:20.532056428 -0300
  @@ -15,6 +15,8 @@
   #include <linux/types.h>
   #include <linux/ioctl.h>

  +#define VHOST_FILE_UNBIND -1
  +
   /* ioctls */

   #define VHOST_VIRTIO 0xAF
  @@ -140,4 +142,6 @@
   /* Get the max ring size. */
   #define VHOST_VDPA_GET_VRING_NUM	_IOR(VHOST_VIRTIO, 0x76, __u16)

  +/* Set event fd for config interrupt*/
  +#define VHOST_VDPA_SET_CONFIG_CALL	_IOW(VHOST_VIRTIO, 0x77, int)
   #endif
  $
  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
  $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
  $ diff -u before after
  --- before	2020-06-17 10:15:35.123275966 -0300
  +++ after	2020-06-17 10:15:51.812482117 -0300
  @@ -27,6 +27,7 @@
   	[0x72] = "VDPA_SET_STATUS",
   	[0x74] = "VDPA_SET_CONFIG",
   	[0x75] = "VDPA_SET_VRING_ENABLE",
  +	[0x77] = "VDPA_SET_CONFIG_CALL",
   };
   static const char *vhost_virtio_ioctl_read_cmds[] = {
   	[0x00] = "GET_FEATURES",
  $

This causes these parts to get rebuilt:

  CC       /tmp/build/perf/trace/beauty/ioctl.o
  INSTALL  trace_plugins
  LD       /tmp/build/perf/trace/beauty/perf-in.o
  LD       /tmp/build/perf/perf-in.o
  LINK     /tmp/build/perf/perf

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zhu Lingshan <lingshan.zhu@intel.com>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      f64925c1
    • Arnaldo Carvalho de Melo's avatar
      tools arch x86: Sync the msr-index.h copy with the kernel sources · 25ca7e5c
      Arnaldo Carvalho de Melo authored 
      To pick up the changes in:

  7e5b3c26 ("x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation")

Addressing these tools/perf build warnings:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
  diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h

With this one will be able to use these new AMD MSRs in filters, by
name, e.g.:

  # perf trace -e msr:* --filter "msr==IA32_MCU_OPT_CTRL"
  ^C#

Using -v we can see how it sets up the tracepoint filters, converting
from the string in the filter to the numeric value:

  # perf trace -v -e msr:* --filter "msr==IA32_MCU_OPT_CTRL"
  Using CPUID GenuineIntel-6-8E-A
  0x123
  New filter for msr:read_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
  0x123
  New filter for msr:write_msr: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
  0x123
  New filter for msr:rdpmc: (msr==0x123) && (common_pid != 335 && common_pid != 30344)
  mmap size 528384B
  ^C#

The updating process shows how this affects tooling in more detail:

  $ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
  --- tools/arch/x86/include/asm/msr-index.h	2020-06-03 10:36:09.959910238 -0300
  +++ arch/x86/include/asm/msr-index.h	2020-06-17 10:04:20.235052901 -0300
  @@ -128,6 +128,10 @@
   #define TSX_CTRL_RTM_DISABLE		BIT(0)	/* Disable RTM feature */
   #define TSX_CTRL_CPUID_CLEAR		BIT(1)	/* Disable TSX enumeration */

  +/* SRBDS support */
  +#define MSR_IA32_MCU_OPT_CTRL		0x00000123
  +#define RNGDS_MITG_DIS			BIT(0)
  +
   #define MSR_IA32_SYSENTER_CS		0x00000174
   #define MSR_IA32_SYSENTER_ESP		0x00000175
   #define MSR_IA32_SYSENTER_EIP		0x00000176
  $ set -o vi
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
  $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
  $ diff -u before after
  --- before	2020-06-17 10:05:49.653114752 -0300
  +++ after	2020-06-17 10:06:01.777258731 -0300
  @@ -51,6 +51,7 @@
   	[0x0000011e] = "IA32_BBL_CR_CTL3",
   	[0x00000120] = "IDT_MCR_CTRL",
   	[0x00000122] = "IA32_TSX_CTRL",
  +	[0x00000123] = "IA32_MCU_OPT_CTRL",
   	[0x00000140] = "MISC_FEATURES_ENABLES",
   	[0x00000174] = "IA32_SYSENTER_CS",
   	[0x00000175] = "IA32_SYSENTER_ESP",
  $

The related change to cpu-features.h affects this:

  CC       /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
  CC       /tmp/build/perf/bench/mem-memset-x86-64-asm.o

This shouldn't be affecting that 'perf bench' entry:

  $ find tools/perf/ -type f | xargs grep SRBDS
  $

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Gross <mgross@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      25ca7e5c
    • Arnaldo Carvalho de Melo's avatar
      Merge remote-tracking branch 'torvalds/master' into perf/urgent · 08a7c777
      Arnaldo Carvalho de Melo authored 
      To get some newer headers that got out of sync with the copies in tools/
so that we can try to have the tools/perf/ build clean for v5.8 with
fewer pull requests.
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      08a7c777
    • Milian Wolff's avatar
      perf script: Initialize zstd_data · b13b04d9
      Milian Wolff authored 
      Fixes segmentation fault when trying to interpret zstd-compressed data
with perf script:

```
  $ perf record -z ls
  ...
  [ perf record: Captured and wrote 0,010 MB perf.data, compressed (original 0,001 MB, ratio is 2,190) ]
  $ memcheck perf script
  ...
  ==67911== Invalid read of size 4
  ==67911==    at 0x5568188: ZSTD_decompressStream (in /usr/lib/libzstd.so.1.4.5)
  ==67911==    by 0x6E726B: zstd_decompress_stream (zstd.c:100)
  ==67911==    by 0x65729C: perf_session__process_compressed_event (session.c:72)
  ==67911==    by 0x6598E8: perf_session__process_user_event (session.c:1583)
  ==67911==    by 0x65BA59: reader__process_events (session.c:2177)
  ==67911==    by 0x65BA59: __perf_session__process_events (session.c:2234)
  ==67911==    by 0x65BA59: perf_session__process_events (session.c:2267)
  ==67911==    by 0x5A7397: __cmd_script (builtin-script.c:2447)
  ==67911==    by 0x5A7397: cmd_script (builtin-script.c:3840)
  ==67911==    by 0x5FE9D2: run_builtin (perf.c:312)
  ==67911==    by 0x711627: handle_internal_command (perf.c:364)
  ==67911==    by 0x711627: run_argv (perf.c:408)
  ==67911==    by 0x711627: main (perf.c:538)
  ==67911==  Address 0x71d8 is not stack'd, malloc'd or (recently) free'd
```
Signed-off-by: default avatarMilian Wolff <milian.wolff@kdab.com>
Acked-by: default avatarAlexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
LPU-Reference: 20200612230333.72140-1-milian.wolff@kdab.com
Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
      b13b04d9
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 69119673
      Linus Torvalds authored 
      Pull networking fixes from David Miller:

 1) Don't get per-cpu pointer with preemption enabled in nft_set_pipapo,
    fix from Stefano Brivio.

 2) Fix memory leak in ctnetlink, from Pablo Neira Ayuso.

 3) Multiple definitions of MPTCP_PM_MAX_ADDR, from Geliang Tang.

 4) Accidently disabling NAPI in non-error paths of macb_open(), from
    Charles Keepax.

 5) Fix races between alx_stop and alx_remove, from Zekun Shen.

 6) We forget to re-enable SRIOV during resume in bnxt_en driver, from
    Michael Chan.

 7) Fix memory leak in ipv6_mc_destroy_dev(), from Wang Hai.

 8) rxtx stats use wrong index in mvpp2 driver, from Sven Auhagen.

 9) Fix memory leak in mptcp_subflow_create_socket error path, from Wei
    Yongjun.

10) We should not adjust the TCP window advertised when sending dup acks
    in non-SACK mode, because it won't be counted as a dup by the sender
    if the window size changes. From Eric Dumazet.

11) Destroy the right number of queues during remove in mvpp2 driver,
    from Sven Auhagen.

12) Various WOL and PM fixes to e1000 driver, from Chen Yu, Vaibhav
    Gupta, and Arnd Bergmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
  e1000e: fix unused-function warning
  e1000: use generic power management
  e1000e: Do not wake up the system via WOL if device wakeup is disabled
  lan743x: add MODULE_DEVICE_TABLE for module loading alias
  mlxsw: spectrum: Adjust headroom buffers for 8x ports
  bareudp: Fixed configuration to avoid having garbage values
  mvpp2: remove module bugfix
  tcp: grow window for OOO packets only for SACK flows
  mptcp: fix memory leak in mptcp_subflow_create_socket()
  netfilter: flowtable: Make nf_flow_table_offload_add/del_cb inline
  net/sched: act_ct: Make tcf_ct_flow_table_restore_skb inline
  net: dsa: sja1105: fix PTP timestamping with large tc-taprio cycles
  mvpp2: ethtool rxtx stats fix
  MAINTAINERS: switch to my private email for Renesas Ethernet drivers
  rocker: fix incorrect error handling in dma_rings_init
  test_objagg: Fix potential memory leak in error handling
  net: ethernet: mtk-star-emac: simplify interrupt handling
  mld: fix memory leak in ipv6_mc_destroy_dev()
  bnxt_en: Return from timer if interface is not in open state.
  bnxt_en: Fix AER reset logic on 57500 chips.
  ...
      69119673
    • Linus Torvalds's avatar
      Merge tag 'afs-fixes-20200616' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs · 26c20ffc
      Linus Torvalds authored 
      Pull AFS fixes from David Howells:
 "I've managed to get xfstests kind of working with afs. Here are a set
  of patches that fix most of the bugs found.

  There are a number of primary issues:

   - Incorrect handling of mtime and non-handling of ctime. It might be
     argued, that the latter isn't a bug since the AFS protocol doesn't
     support ctime, but I should probably still update it locally.

   - Shared-write mmap, truncate and writeback bugs. This includes not
     changing i_size under the callback lock, overwriting local i_size
     with the reply from the server after a partial writeback, not
     limiting the writeback from an mmapped page to EOF.

   - Checks for an abort code indicating that the primary vnode in an
     operation was deleted by a third-party are done in the wrong place.

   - Silly rename bugs. This includes an incomplete conversion to the
     new operation handling, duplicate nlink handling, nlink changing
     not being done inside the callback lock and insufficient handling
     of third-party conflicting directory changes.

  And some secondary ones:

   - The UAEOVERFLOW abort code should map to EOVERFLOW not EREMOTEIO.

   - Remove a couple of unused or incompletely used bits.

   - Remove a couple of redundant success checks.

  These seem to fix all the data-corruption bugs found by

	./check -afs -g quick

  along with the obvious silly rename bugs and time bugs.

  There are still some test failures, but they seem to fall into two
  classes: firstly, the authentication/security model is different to
  the standard UNIX model and permission is arbitrated by the server and
  cached locally; and secondly, there are a number of features that AFS
  does not support (such as mknod). But in these cases, the tests
  themselves need to be adapted or skipped.

  Using the in-kernel afs client with xfstests also found a bug in the
  AuriStor AFS server that has been fixed for a future release"

* tag 'afs-fixes-20200616' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix silly rename
  afs: afs_vnode_commit_status() doesn't need to check the RPC error
  afs: Fix use of afs_check_for_remote_deletion()
  afs: Remove afs_operation::abort_code
  afs: Fix yfs_fs_fetch_status() to honour vnode selector
  afs: Remove yfs_fs_fetch_file_status() as it's not used
  afs: Fix the mapping of the UAEOVERFLOW abort code
  afs: Fix truncation issues and mmap writeback size
  afs: Concoct ctimes
  afs: Fix EOF corruption
  afs: afs_write_end() should change i_size under the right lock
  afs: Fix non-setting of mtime when writing into mmap
      26c20ffc
    • Randy Dunlap's avatar
      Documentation: remove SH-5 index entries · f17957f7
      Randy Dunlap authored 
      Remove SH-5 documentation index entries following the removal
of SH-5 source code.

Error: Cannot open file ../arch/sh/mm/tlb-sh5.c
Error: Cannot open file ../arch/sh/mm/tlb-sh5.c
Error: Cannot open file ../arch/sh/include/asm/tlb_64.h
Error: Cannot open file ../arch/sh/include/asm/tlb_64.h

Fixes: 3b69e8b4 ("Merge tag 'sh-for-5.8' of git://git.libc.org/linux-sh")
Signed-off-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Reviewed-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Cc: Rich Felker <dalias@libc.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: ysato@users.sourceforge.jp
Cc: linux-sh@vger.kernel.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f17957f7
    • Linus Torvalds's avatar
      Merge tag 'flex-array-conversions-5.8-rc2' of... · ffbc9376
      Linus Torvalds authored 
      Merge tag 'flex-array-conversions-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull flexible-array member conversions from Gustavo A. R. Silva:
 "Replace zero-length arrays with flexible-array members.

  Notice that all of these patches have been baking in linux-next for
  two development cycles now.

  There is a regular need in the kernel to provide a way to declare
  having a dynamically sized set of trailing elements in a structure.
  Kernel code should always use “flexible array members”[1] for these
  cases. The older style of one-element or zero-length arrays should no
  longer be used[2].

  C99 introduced “flexible array members”, which lacks a numeric size
  for the array declaration entirely:

        struct something {
                size_t count;
                struct foo items[];
        };

  This is the way the kernel expects dynamically sized trailing elements
  to be declared. It allows the compiler to generate errors when the
  flexible array does not occur last in the structure, which helps to
  prevent some kind of undefined behavior[3] bugs from being
  inadvertently introduced to the codebase.

  It also allows the compiler to correctly analyze array sizes (via
  sizeof(), CONFIG_FORTIFY_SOURCE, and CONFIG_UBSAN_BOUNDS). For
  instance, there is no mechanism that warns us that the following
  application of the sizeof() operator to a zero-length array always
  results in zero:

        struct something {
                size_t count;
                struct foo items[0];
        };

        struct something *instance;

        instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
        instance->count = count;

        size = sizeof(instance->items) * instance->count;
        memcpy(instance->items, source, size);

  At the last line of code above, size turns out to be zero, when one
  might have thought it represents the total size in bytes of the
  dynamic memory recently allocated for the trailing array items. Here
  are a couple examples of this issue[4][5].

  Instead, flexible array members have incomplete type, and so the
  sizeof() operator may not be applied[6], so any misuse of such
  operators will be immediately noticed at build time.

  The cleanest and least error-prone way to implement this is through
  the use of a flexible array member:

        struct something {
                size_t count;
                struct foo items[];
        };

        struct something *instance;

        instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
        instance->count = count;

        size = sizeof(instance->items[0]) * instance->count;
        memcpy(instance->items, source, size);

  instead"

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
[4] commit f2cd32a4 ("rndis_wlan: Remove logically dead code")
[5] commit ab91c2a8 ("tpm: eventlog: Replace zero-length array with flexible-array member")
[6] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html

* tag 'flex-array-conversions-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (41 commits)
  w1: Replace zero-length array with flexible-array
  tracing/probe: Replace zero-length array with flexible-array
  soc: ti: Replace zero-length array with flexible-array
  tifm: Replace zero-length array with flexible-array
  dmaengine: tegra-apb: Replace zero-length array with flexible-array
  stm class: Replace zero-length array with flexible-array
  Squashfs: Replace zero-length array with flexible-array
  ASoC: SOF: Replace zero-length array with flexible-array
  ima: Replace zero-length array with flexible-array
  sctp: Replace zero-length array with flexible-array
  phy: samsung: Replace zero-length array with flexible-array
  RxRPC: Replace zero-length array with flexible-array
  rapidio: Replace zero-length array with flexible-array
  media: pwc: Replace zero-length array with flexible-array
  firmware: pcdp: Replace zero-length array with flexible-array
  oprofile: Replace zero-length array with flexible-array
  block: Replace zero-length array with flexible-array
  tools/testing/nvdimm: Replace zero-length array with flexible-array
  libata: Replace zero-length array with flexible-array
  kprobes: Replace zero-length array with flexible-array
  ...
      ffbc9376
    • Arvind Sankar's avatar
      x86/purgatory: Add -fno-stack-protector · ff58155c
      Arvind Sankar authored 
      The purgatory Makefile removes -fstack-protector options if they were
configured in, but does not currently add -fno-stack-protector.

If gcc was configured with the --enable-default-ssp configure option,
this results in the stack protector still being enabled for the
purgatory (absent distro-specific specs files that might disable it
again for freestanding compilations), if the main kernel is being
compiled with stack protection enabled (if it's disabled for the main
kernel, the top-level Makefile will add -fno-stack-protector).

This will break the build since commit
  e4160b2e ("x86/purgatory: Fail the build if purgatory.ro has missing symbols")
and prior to that would have caused runtime failure when trying to use
kexec.

Explicitly add -fno-stack-protector to avoid this, as done in other
Makefiles that need to disable the stack protector.
Reported-by: default avatarGabriel C <nix.or.die@googlemail.com>
Signed-off-by: default avatarArvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ff58155c
  5. 16 Jun, 2020 26 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7