In the most common use case, the Synopsys DW UART driver does not
set the set_termios callback function.  This prevents UPSTAT_AUTOCTS
from being set when the UART flag CRTSCTS is set.  As a result, the
driver will use software flow control as opposed to hardware flow
control.

To fix the problem, the set_termios callback function is set to the
DW specific function.  The logic to set UPSTAT_AUTOCTS is moved so
that any clock error will not affect setting the hardware flow
control.
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Jason Uy <jason.uy@broadcom.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SCI instances found in SH SoCs have different spacing between registers
depending on the SoC. The platform data contains a regshift field that
tells the driver by how many bits to shift the register offset to
compute its address. We can compute the regshift value automatically
based on the memory resource size, there's no need to pass the value
through platform data.

Fix the sh7750 SCI and sh7760 SIM port memory resources length to ensure
proper computation of the regshift value.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The field isn't set by any platform but is only used internally in the
driver to hold data parsed from DT. Move it to the sci_port structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sh-sci driver implements manual break debouncing for a few SH
platforms by reading the value of the RX pin port register. This feature
is optional and the driver considers all negative or zero values of the
platform data port_reg field as invalid. As the four platforms that set
the field to a register address all use an address higher than
0x7fffffff, the driver will always consider the value as invalid and
never perform debouncing. The feature is unused, remove it.

Debouncing could be implemented properly in the future using the pinctrl
and GPIO APIs if desired.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Only SH platforms still use platform data for the sh-sci, and none of
them declare DMA channels connected to the SCI. Remove the corresponding
platform data fields and simplify the driver accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The fifo size, overrun register and mask, sampling rate mask and error
mask all depend on the port type only and don't need to be computed at
runtime. Add them to the sci_port_parameters structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver modifies platform data for internal purpose only. Fix that
and make the platform data structure const.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Turn the regmap two-dimensional array to an array of port parameters and
store a pointer to the port parameters in the sci_port structure. This
will allow handling additional port type dependent parameters.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The compiler zeros uninitialized fields, don't zero them manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Even though most of its registers are 8-bit wide, the IRDA has two
16-bit registers that make it a 16-bit peripheral and not a 8-bit
peripheral with addresses shifted by one. Fix the registers offset in
the driver and the platform data regshift value.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

According to the datasheets, the sh7760 SIM and sh7723 SCIFA instances
don't implement the REIE bit. Don't set it in platform data.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The bit is only set by platforms that also set the CKE1 but, in which
case its value is ignored by the device. Don't set it, this simplifies
platform data and only leaves the CKE1 bit to be handled.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver considers all negative or zero values of the port_reg field
as invalid. The four platforms that set the field to a register address
all use an address higher than 0x7fffffff, which is thus considered by
the driver as invalid. The feature is thus never used, remove it.

The feature could be implemented properly in the future using the
pinctrl and GPIO APIs if desired.

While at it, don't set the field to SCIx_NOT_SUPPORTED (-1) either,
leaving it unset leads to the same result. This will allow removing the
SCIx_NOT_SUPPORTED macro.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The flag is set by the driver internally, don't set it in platform data.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The SCIF ports on sh7264 and sh7269 don't support the TOIE bit according
to the datasheets.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The scscr platform data field is used by the driver in three locations.
One of them masks out all bits except SCSCR_REIE. The two other are the
set_termios handler and the console write handler.

The set_termios handler calls sci_start_rx() to enable the receiver,
which sets the RIE bit unconditionally. It then calls sci_port_disable()
that effectively disables both the transmitter and the receiver. The
TIE bit will thus get set later when the serial cores reenables the
serial port.

The console write handler runs with interrupts disabled, and saves and
restores the SCSCR register value. The RIE and TIE bits are thus not
needed there.

The bits are thus not necessary in platform data, remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The bits are set by the driver internally, don't set them in platform
data.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The UPF_BOOT_AUTOCONF platform data flag is set by all platforms,
hardcode it.

The UPF_IOREMAP flag is set by a single SH platform and thus needs to be
kept. However, for ARM platforms, we can base the decision on whether an
OF node is present and bypass the platform data flags completely.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Transmit Enable and Receive Enable bits are set in the scscr field
of all instances of the sh-sci platform data. Set them in the driver
directly to prepare for their removal from platform data.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the serial/tty fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull namespace fixes from Eric Biederman:
 "This tree contains 4 fixes.

  The first is a fix for a race that can causes oopses under the right
  circumstances, and that someone just recently encountered.

  Past that are several small trivial correct fixes. A real issue that
  was blocking development of an out of tree driver, but does not appear
  to have caused any actual problems for in-tree code. A potential
  deadlock that was reported by lockdep. And a deadlock people have
  experienced and took the time to track down caused by a cleanup that
  removed the code to drop a reference count"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  sysctl: Drop reference added by grab_header in proc_sys_readdir
  pid: fix lockdep deadlock warning due to ucount_lock
  libfs: Modify mount_pseudo_xattr to be clear it is not a userspace mount
  mnt: Protect the mountpoint hashtable with mount_lock

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc driver fixes for 4.10-rc4 that resolve
  some reported issues.

  The MEI driver issue resolves a lot of problems that people have been
  having, as does the mem driver fix. The other minor fixes resolve
  other reported issues.

  All of these have been in linux-next for a while"

* tag 'char-misc-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  vme: Fix wrong pointer utilization in ca91cx42_slave_get
  auxdisplay: fix new ht16k33 build errors
  ppdev: don't print a free'd string
  extcon: return error code on failure
  drivers: char: mem: Fix thinkos in kmem address checks
  mei: bus: enable OS version only for SPT and newer

Merge tag 'driver-core-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "Here is a single patch being reverted to remove a feature that was
  added in 4.10-rc1 that isn't quite ready for release.

  It will be redone as a debugfs file instead of a sysfs file in the
  future"

* tag 'driver-core-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Revert "driver core: Add deferred_probe attribute to devices in sysfs"

Pull tty/serial fixes from Greg KH:
 "Here are some small tty/serial driver fixes for 4.10-rc4 to resolve a
  number of reported issues.

  Nothing major here at all, one revert of a problematic patch, and some
  other tiny bugfixes. Full details are in the shortlog below.

  All have been in linux-next with no reported issues"

* tag 'tty-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  sysrq: attach sysrq handler correctly for 32-bit kernel
  Revert "tty: serial: 8250: add CON_CONSDEV to flags"
  Clearing FIFOs in RS485 emulation mode causes subsequent transmits to break
  8250_pci: Fix potential use-after-free in error path
  tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done
  tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx

Pull USB fixes from Greg KH:
 "Here are a few small USB driver fixes for 4.10-rc4 to resolve some
  reported issues.

  The "largest" here is a number of bugs being fixed in the ch341
  usb-serial driver, to hopefully resolve the mess of different devices
  floating around that use this driver that have been having problems
  with the 4.10-rc1 release.

  There's also a tiny musb fix that I missed in the last pull request,
  as well as the traditional xhci fix rounding out the batch.

  All have been in linux-next with no reported issues"

* tag 'usb-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: fix deadlock at host remove by running watchdog correctly
  USB: serial: ch341: fix control-message error handling
  usb: musb: fix runtime PM in debugfs
  wusbcore: Fix one more crypto-on-the-stack bug
  USB: serial: kl5kusb105: fix line-state error handling
  USB: serial: ch341: fix baud rate and line-control handling
  USB: serial: ch341: fix line settings after reset-resume
  USB: serial: ch341: fix resume after reset
  USB: serial: ch341: fix open error handling
  USB: serial: ch341: fix modem-control and B0 handling
  USB: serial: ch341: fix open and resume after B0
  USB: serial: ch341: fix initial modem-control state

Pull i2c fixes from Wolfram Sang:
 "Bugfixes for I2C. Mostly core this time which is a bit unusual but
  nothing really scary in there"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: piix4: Avoid race conditions with IMC
  i2c: fix spelling mistake: "insufficent" -> "insufficient"
  i2c: print correct device invalid address
  i2c: do not enable fall back to Host Notify by default
  i2c: fix kernel memory disclosure in dev interface

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - unwinder fixes
   - AMD CPU topology enumeration fixes
   - microcode loader fixes
   - x86 embedded platform fixes
   - fix for a bootup crash that may trigger when clearcpuid= is used
     with invalid values"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mpx: Use compatible types in comparison to fix sparse error
  x86/tsc: Add the Intel Denverton Processor to native_calibrate_tsc()
  x86/entry: Fix the end of the stack for newly forked tasks
  x86/unwind: Include __schedule() in stack traces
  x86/unwind: Disable KASAN checks for non-current tasks
  x86/unwind: Silence warnings for non-current tasks
  x86/microcode/intel: Use correct buffer size for saving microcode data
  x86/microcode/intel: Fix allocation size of struct ucode_patch
  x86/microcode/intel: Add a helper which gives the microcode revision
  x86/microcode: Use native CPUID to tickle out microcode revision
  x86/CPU: Add native CPUID variants returning a single datum
  x86/boot: Add missing declaration of string functions
  x86/CPU/AMD: Fix Bulldozer topology
  x86/platform/intel-mid: Rename 'spidev' to 'mrfld_spidev'
  x86/cpu: Fix typo in the comment for Anniedale
  x86/cpu: Fix bootup crashes by sanitizing the argument of the 'clearcpuid=' command-line option

Pull NOHZ fix from Ingo Molnar:
 "This fixes an old NOHZ race where we incorrectly calculate the next
  timer interrupt in certain circumstances where hrtimers are pending,
  that can cause hard to reproduce stalled-values artifacts in
  /proc/stat"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  nohz: Fix collision between tick and other hrtimers

Pull perf fixes from Ingo Molnar:
 "Misc race fixes uncovered by fuzzing efforts, a Sparse fix, two PMU
  driver fixes, plus miscellanous tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Reject non sampling events with precise_ip
  perf/x86/intel: Account interrupts for PEBS errors
  perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' race
  perf/core: Fix sys_perf_event_open() vs. hotplug
  perf/x86/intel: Use ULL constant to prevent undefined shift behaviour
  perf/x86/intel/uncore: Fix hardcoded socket 0 assumption in the Haswell init code
  perf/x86: Set pmu->module in Intel PMU modules
  perf probe: Fix to probe on gcc generated symbols for offline kernel
  perf probe: Fix --funcs to show correct symbols for offline module
  perf symbols: Robustify reading of build-id from sysfs
  perf tools: Install tools/lib/traceevent plugins with install-bin
  tools lib traceevent: Fix prev/next_prio for deadline tasks
  perf record: Fix --switch-output documentation and comment
  perf record: Make __record_options static
  tools lib subcmd: Add OPT_STRING_OPTARG_SET option
  perf probe: Fix to get correct modname from elf header
  samples/bpf trace_output_user: Remove duplicate sys/ioctl.h include
  samples/bpf sock_example: Avoid getting ethhdr from two includes
  perf sched timehist: Show total scheduling time

Pull EFI fixes from Ingo Molnar:
 "A number of regression fixes:

   - Fix a boot hang on machines that have somewhat unusual memory map
     entries of phys_addr=0x0 num_pages=0, which broke due to a recent
     commit. This commit got cherry-picked from the v4.11 queue because
     the bug is affecting real machines.

   - Fix a boot hang also reported by KASAN, caused by incorrect init
     ordering introduced by a recent optimization.

   - Fix a recent robustification fix to allocate_new_fdt_and_exit_boot()
     that introduced an invalid assumption. Neither bugs were seen in
     the wild AFAIK"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/x86: Prune invalid memory map entries and fix boot regression
  x86/efi: Don't allocate memmap through memblock after mm_init()
  efi/libstub/arm*: Pass latest memory map to the kernel

Pull vfs fixes from Al Viro.

The most notable fix here is probably the fix for a splice regression
("fix a fencepost error in pipe_advance()") noticed by Alan Wylie.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix a fencepost error in pipe_advance()
  coredump: Ensure proper size of sparse core files
  aio: fix lock dep warning
  tmpfs: clear S_ISGID when setting posix ACLs

Pull block fixes from Jens Axboe:

 - the virtio_blk stack DMA corruption fix from Christoph, fixing and
   issue with VMAP stacks.

 - O_DIRECT blkbits calculation fix from Chandan.

 - discard regression fix from Christoph.

 - queue init error handling fixes for nbd and virtio_blk, from Omar and
   Jeff.

 - two small nvme fixes, from Christoph and Guilherme.

 - rename of blk_queue_zone_size and bdev_zone_size to _sectors instead,
   to more closely follow what we do in other places in the block layer.
   This interface is new for this series, so let's get the naming right
   before releasing a kernel with this feature. From Damien.

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: don't try to discard from __blkdev_issue_zeroout
  sd: remove __data_len hack for WRITE SAME
  nvme: use blk_rq_payload_bytes
  scsi: use blk_rq_payload_bytes
  block: add blk_rq_payload_bytes
  block: Rename blk_queue_zone_size and bdev_zone_size
  nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too
  nvme-rdma: fix nvme_rdma_queue_is_ready
  virtio_blk: fix panic in initialization error path
  nbd: blk_mq_init_queue returns an error code on failure, not NULL
  virtio_blk: avoid DMA to stack for the sense buffer
  do_direct_IO: Use inode->i_blkbits to compute block count to be cleaned

The logics in pipe_advance() used to release all buffers past the new
position failed in cases when the number of buffers to release was equal
to pipe->buffers.  If that happened, none of them had been released,
leaving pipe full.  Worse, it was trivial to trigger and we end up with
pipe full of uninitialized pages.  IOW, it's an infoleak.

Cc: stable@vger.kernel.org # v4.9
Reported-by: "Alan J. Wylie" <alan@wylie.me.uk>
Tested-by: "Alan J. Wylie" <alan@wylie.me.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

If the last section of a core file ends with an unmapped or zero page,
the size of the file does not correspond with the last dump_skip() call.
gdb complains that the file is truncated and can be confusing to users.

After all of the vma sections are written, make sure that the file size
is no smaller than the current file position.

This problem can be demonstrated with gdb's bigcore testcase on the
sparc architecture.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

lockdep reports a warnning. file_start_write/file_end_write only
acquire/release the lock for regular files. So checking the files in aio
side too.

[  453.532141] ------------[ cut here ]------------
[  453.533011] WARNING: CPU: 1 PID: 1298 at ../kernel/locking/lockdep.c:3514 lock_release+0x434/0x670
[  453.533011] DEBUG_LOCKS_WARN_ON(depth <= 0)
[  453.533011] Modules linked in:
[  453.533011] CPU: 1 PID: 1298 Comm: fio Not tainted 4.9.0+ #964
[  453.533011] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.0-1.fc24 04/01/2014
[  453.533011]  ffff8803a24b7a70 ffffffff8196cffb ffff8803a24b7ae8 0000000000000000
[  453.533011]  ffff8803a24b7ab8 ffffffff81091ee1 ffff8803a5dba700 00000dba00000008
[  453.533011]  ffffed0074496f59 ffff8803a5dbaf54 ffff8803ae0f8488 fffffffffffffdef
[  453.533011] Call Trace:
[  453.533011]  [<ffffffff8196cffb>] dump_stack+0x67/0x9c
[  453.533011]  [<ffffffff81091ee1>] __warn+0x111/0x130
[  453.533011]  [<ffffffff81091f97>] warn_slowpath_fmt+0x97/0xb0
[  453.533011]  [<ffffffff81091f00>] ? __warn+0x130/0x130
[  453.533011]  [<ffffffff8191b789>] ? blk_finish_plug+0x29/0x60
[  453.533011]  [<ffffffff811205d4>] lock_release+0x434/0x670
[  453.533011]  [<ffffffff8198af94>] ? import_single_range+0xd4/0x110
[  453.533011]  [<ffffffff81322195>] ? rw_verify_area+0x65/0x140
[  453.533011]  [<ffffffff813aa696>] ? aio_write+0x1f6/0x280
[  453.533011]  [<ffffffff813aa6c9>] aio_write+0x229/0x280
[  453.533011]  [<ffffffff813aa4a0>] ? aio_complete+0x640/0x640
[  453.533011]  [<ffffffff8111df20>] ? debug_check_no_locks_freed+0x1a0/0x1a0
[  453.533011]  [<ffffffff8114793a>] ? debug_lockdep_rcu_enabled.part.2+0x1a/0x30
[  453.533011]  [<ffffffff81147985>] ? debug_lockdep_rcu_enabled+0x35/0x40
[  453.533011]  [<ffffffff812a92be>] ? __might_fault+0x7e/0xf0
[  453.533011]  [<ffffffff813ac9bc>] do_io_submit+0x94c/0xb10
[  453.533011]  [<ffffffff813ac2ae>] ? do_io_submit+0x23e/0xb10
[  453.533011]  [<ffffffff813ac070>] ? SyS_io_destroy+0x270/0x270
[  453.533011]  [<ffffffff8111d7b3>] ? mark_held_locks+0x23/0xc0
[  453.533011]  [<ffffffff8100201a>] ? trace_hardirqs_on_thunk+0x1a/0x1c
[  453.533011]  [<ffffffff813acb90>] SyS_io_submit+0x10/0x20
[  453.533011]  [<ffffffff824f96aa>] entry_SYSCALL_64_fastpath+0x18/0xad
[  453.533011]  [<ffffffff81119190>] ? trace_hardirqs_off_caller+0xc0/0x110
[  453.533011] ---[ end trace b2fbe664d1cc0082 ]---

Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull dmaengine fixes from Vinod Koul:
 "The fixes this time around are spread over drivers, pretty normal
  update:

   - PCI ID for SKL ioatdma, workaround for SKX and
     ioat_alloc_chan_resources sleepy allocation fix

   - dw kconfig typo fix

   - null pointer deref for stm32

   - MAINTAINERS Update for at_hdmac

   - pl330 runtime pm fixes

   - omap-dma port window fix

   - rcar-dmac unmap slave resource fix"

* tag 'dmaengine-fix-4.10-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: rcar-dmac: unmap slave resource when channel is freed
  dmaengine: omap-dma: Fix the port_window support
  dmaengine: iota: ioat_alloc_chan_resources should not perform sleeping allocations.
  dmaengine: pl330: Fix runtime PM support for terminated transfers
  MAINTAINERS: dmaengine: Update + Hand over the at_hdmac driver to Ludovic
  dmaengine: omap-dma: Fix dynamic lch_map allocation
  dmaengine: ti-dma-crossbar: Add some 'of_node_put()' in error path.
  dmaengine: stm32-dma: Fix null pointer dereference in stm32_dma_tx_status
  dmaengine: stm32-dma: Set correct args number for DMA request from DT
  dmaengine: dw: fix typo in Kconfig
  dmaengine: ioatdma: workaround SKX ioatdma version
  dmaengine: ioatdma: Add Skylake PCI Dev ID

Some machines, such as the Lenovo ThinkPad W541 with firmware GNET80WW
(2.28), include memory map entries with phys_addr=0x0 and num_pages=0.

These machines fail to boot after the following commit,

  commit 8e80632f ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()")

Fix this by removing such bogus entries from the memory map.

Furthermore, currently the log output for this case (with efi=debug)
looks like:

 [    0.000000] efi: mem45: [Reserved           |   |  |  |  |  |  |  |  |  |  |  |  ] range=[0x0000000000000000-0xffffffffffffffff] (0MB)

This is clearly wrong, and also not as informative as it could be.  This
patch changes it so that if we find obviously invalid memory map
entries, we print an error and skip those entries.  It also detects the
display of the address range calculation overflow, so the new output is:

 [    0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries:
 [    0.000000] efi: mem45: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)

It also detects memory map sizes that would overflow the physical
address, for example phys_addr=0xfffffffffffff000 and
num_pages=0x0200000000000001, and prints:

 [    0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries:
 [    0.000000] efi: mem45: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[phys_addr=0xfffffffffffff000-0x20ffffffffffffffff] (invalid)

It then removes these entries from the memory map.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[ardb: refactor for clarity with no functional changes, avoid PAGE_SHIFT]
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
[Matt: Include bugzilla info in commit log]
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=191121Signed-off-by: Ingo Molnar <mingo@kernel.org>

This reverts commit 6751667a.

Rob Herring objected to it, and a replacement for it will be added using
debugfs in the future.

Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As Peter suggested [1] rejecting non sampling PEBS events,
because they dont make any sense and could cause bugs
in the NMI handler [2].

  [1] http://lkml.kernel.org/r/20170103094059.GC3093@worktop
  [2] http://lkml.kernel.org/r/1482931866-6018-3-git-send-email-jolsa@kernel.orgSigned-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vince@deater.net>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20170103142454.GA26251@kravaSigned-off-by: Ingo Molnar <mingo@kernel.org>