- 25 Jan, 2005 40 commits
-
-
Steffen Klassert authored
With this patch get_ethtool_stats() provides the NIC-specific extra stats. Signed-off-by:
Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Brian Gerst authored
This patch cleans up usage of UTS_RELEASE, by replacing many references with system_utsname.release, and deleting others. This eliminates a dependency on version.h for these files, so they don't get rebuilt if EXTRAVERSION or localversion change. Signed-off-by:
Brian Gerst <bgerst@didntduck.org> Signed-off-by:
-
Christoph Hellwig authored
With Steffen Klassert <klassert@mathematik.tu-chemnitz.de> no more users left, time to kill the various implementations Signed-off-by:
-
Pavel Machek authored
This enables swsusp on SMP machines. It should be working in 2.6.10, already (but you may need noapic in 2.6.10). Signed-off-by:
-
Pavel Machek authored
Signed-off-by:
-
Yoshinori Sato authored
Fix build error when .config does not exist Signed-off-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Yoshinori Sato authored
update argument type Signed-off-by:
-
Andi Kleen authored
The following patch speeds up the restoring of swsusp images on x86-64 and makes the assembly code more readable (tested and works on AMD64). Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Changed by AK to not hardcode any C values and get them from offset.h instead and not flushing CR3 needlessly (according to Pavel it was just an old debugging measure that is not needed anymore) Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Andi Kleen authored
Remove invisible earlyprintk help. Signed-off-by:
-
Andi Kleen authored
Enlarge max nodes mask in k8 northbridge scan code. Signed-off-by:
-
Andi Kleen authored
There's usually no reason for including the same header file twice. The patch below removes such duplicate includes in x86_64 specific files. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Andi Kleen authored
Drop unused centaur mtrr support code. Signed-off-by:
-
Andi Kleen authored
Remove unused get_cr2 function (from i386) Signed-off-by:
-
Rusty Russell authored
Andi Kleen reported a problem where a very slow boot caused the timer interrupt on a secondary CPU to go off before the CPU was actually brought up by the core code, so the CPU_PREPARE notifier hadn't been called, so the per-cpu timer code wasn't set up. This was caused by enabling interrupts around calibrate_delay() on secondary CPUs, which is not actually neccessary (interrupts on CPU 0 increments jiffies, which is all that is required). So delay enabling interrupts until the actual __cpu_up() call for that CPU. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch adds the missing ioremap call to pci_iomap on ppc64. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Anton Blanchard authored
Enable the virtual ethernet and virtual scsi drivers in the pseries config. Since our root device may be on either we need them compiled in (unless we play initrd tricks). Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Anton Blanchard authored
The kernel wouldnt link when SYSVIPC was disabled. x86-64 was already defining a cond_syscall, instead of duplicating it in the ppc64 port move it into the arch specific portion of kernel/sys_ni.c Signed-off-by:
-
Anton Blanchard authored
The debug information in the boot wrapper can be quite verbose (it prints an entry for every address it attempts to claim). Disable it. Signed-off-by:
-
Anton Blanchard authored
Allow EEH to be disabled for pSeries targets, but only if the EMBEDDED option is enabled. This version incorporates some suggestions from Arnd Bergmann and Linas Vepstas. Signed-off-by:
-
Paul Mackerras authored
This patch is from Nathan Lynch <nathanl@austin.ibm.com>. This changes struct device_node and associated code to use the kref api for object refcounting and freeing. I've given it some testing on pSeries with cpu add/remove and verified that the release function works. The change is somewhat cosmetic but it does make the code easier to understand... at least I think so =) The only real change is that the refcount on all device_nodes is initialized at 1, and the device node is freed when the refcount reaches 0 (of_remove_node has the extra "put" to ensure that this happens). This lets us get rid of the OF_STALE flag and macros in prom.h. Signed-off-by:
Nathan Lynch <nathanl@austin.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Paul Mackerras authored
This patch is originally from Nathan Lynch <nathanl@austin.ibm.com>. Sparse gives a warning "constant ... is so big it is long" for every expression where we check bits in the cur_cpu_spec->cpu_features value. This patch removes the warnings by using the ASM_CONST macro. Signed-off-by:
-
Paul Mackerras authored
This patch is originally from Linas Vepstas <linas@linas.org>. This is a dumb, dorky cleanup patch: Per last round of emails, the concept of EEH_REGION is gone, but a few stubs remained. This patch removes them. Signed-off-by:
Linas Vepstas <linas@linas.org> Signed-off-by:
-
Paul Mackerras authored
This patch is from Nishanth Aravamudan <nacc@us.ibm.com>. Replace schedule_timeout() with ssleep to simplify the code and to express the delay in seconds instead of HZ. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
-
Paul Mackerras authored
This patch is from Nishanth Aravamudan <nacc@us.ibm.com>. Replace schedule_timeout() with msleep to simplify the code and to express the delay in milliseconds instead of HZ. Signed-off-by:
-
Paul Mackerras authored
This patch is from Nishanth Aravamudan <nacc@us.ibm.com>. Replace schedule_timeout() with msleep to simplify the code and to express the delay in milliseconds instead of HZ. Signed-off-by:
-
Paul Mackerras authored
This patch is from Nishanth Aravamudan <nacc@us.ibm.com>. Replace schedule_timeout() with msleep to simplify the code and to express the delay in milliseconds instead of HZ. Signed-off-by:
-
Paul Mackerras authored
This patch is from Craig Chaney <cchaney@us.ibm.com>. This patch moves the restoring of the stack pointer in the system call exit path to after the point where we clear the RI (recoverable interrupt) bit in the MSR. Normally, loading the stack pointer before clearing RI doesn't cause any problem because there is no trap that can normally occur in between. But if we are tracing the code using a tool that single-steps instructions, this can cause a problem. In this case, clearing RI serves as an indication that the following code can't be safely single-stepped. Signed-off-by:
Craig Chaney <cchaney@us.ibm.com> Signed-off-by:
-
Paul Mackerras authored
This patch is from Jake Moilanen <moilanen@austin.ibm.com>. The instruction syntax for the in_be64 inline asm was incorrect for the "m" constraint for the address parameter. This patch fixes the instruction in the inline asm. Signed-off-by:
Jake Moilanen <moilanen@austin.ibm.com> Signed-off-by:
-
Paul Mackerras authored
This patch is originally from Jake Moilanen <moilanen@austin.ibm.com>, substantially modified by me. On PPC64 systems with a hypervisor, we can't set the Data Address Breakpoint Register (DABR) directly, we have to do it through a hypervisor call. Signed-off-by:
-
Anton Blanchard authored
We were allocating 48 segment tables on UP kernels. Remove them and save 192kB of kernel memory on UP builds. Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch, mostly from Sven Luther and reworked by me, adds support for Pegasos machines to the ppc32 arch. The patch contains all of the arch code. I'll send separately a few driver changes as well. Signed-off-by:
-
Kumar Gala authored
The ppc pci bus and resource fixups will automatically adjust the IO space mappings by (hose->io_base_virt - isa_io_base). Since we map all of PCI IO space (PCI1 & PCI2) with a single mapping so it is continguious in virtual, physical, and PCI IO space the offset will equal MPC85XX_PCI1_IO_SIZE. There for we needed to reduce the setting by that amount for everything to work properly on CDS. Signed-off-by:
Kumar Gala <kumar.gala@freescale.com> Signed-off-by:
-
Randy Vinson authored
The PPC version of pci_iomap seems to be missing a call to ioremap. This patch corrects that oversight and has been tested on a IBM PPC750FX Eval board. Signed-off-by:
Randy Vinson <rvinson@mvista.com> Signed-off-by:
-
Kumar Gala authored
Allows a platform to initialize serial_state completely from gen550_init and no longer requires it to define SERIAL_PORT_DFNS. Signed-off-by:
-
Kumar Gala authored
Adds default config files the MPC8540 ADS, MPC8560 ADS, and MPC8555 CDS reference boards. Hopefully people will stop asking me for mine :) Signed-off-by:
-
Andrea Arcangeli authored
Fix up an smp race introduced in 2.6.11-rc1 Signed-off-by:
Andrea Arcangeli <andrea@suse.de> Signed-off-by:
-
Andrea Arcangeli authored
With Rik van Riel <riel@redhat.com> Simply running "dd if=/dev/zero of=/dev/hd<one you can miss>" can cause excessive amounts of dirty lowmem pagecache, due to the blockdev's non-highmem page allocation strategy. This patch effectively lowers the dirty limit for mappings which cannot be cached in highmem, counting the dirty limit as a percentage of lowmem instead. This should prevent heavy block device writers from pushing the VM over the edge and triggering OOM kills. Signed-off-by:
Rik van Riel <riel@redhat.com> Acked-by:
-
Chris Wright authored
Fix a bug spotted by "Michael S. Tsirkin" <mst@mellanox.co.il> Introduce a simple helper, vfs_ioctl(), so that both sys_ioctl() and compat_sys_ioctl() call the security hook in all cases and without duplication. Signed-off-by:
Chris Wright <chrisw@osdl.org> Signed-off-by:
-
Akinobu Mita authored
When some hardware setups or architectures do not allow OProfile to use performance counters, OProfile operates in timer mode. But, from 2.6.11-rc1, we need to specify the module parameter "timer=1" to work on timer interrupt mode. Change things so that we detect the absence of the high-resolution timer and fall back to timer-based profiling automatically. Furthermore we can easily get oops by reading /dev/oprofile/cpu_type. Signed-off-by:
Akinobu Mita <amgta@yacht.ocn.ne.jp> Signed-off-by:
-
Yoichi Yuasa authored
arch/mips/lib/csum_partial_copy.c:21: error: conflicting types for `csum_partial_copy_nocheck' include/asm/checksum.h:65: error: previous declaration of `csum_partial_copy_nocheck' arch/mips/lib/csum_partial_copy.c:38: error: conflicting types for `csum_partial_copy_from_user' include/asm/checksum.h:38: error: previous declaration of `csum_partial_copy_from_user' make[1]: *** [arch/mips/lib/csum_partial_copy.o] Error 1 make: *** [arch/mips/lib] Error 2 Signed-off-by:
Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by:
-
