- 22 Oct, 2005 40 commits
-
-
Matthew Wilcox authored
Update drivers to new input layer changes. Signed-off-by:
Helge Deller <deller@parisc-linux.org> Signed-off-by:
Matthew Wilcox <willy@parisc-linux.org> Reorder code in gscps2_interrupt() and only enable ports when opened. This fixes issues with hangs booting an SMP kernel on my C360. Previously serio_interrupt() could be called before the lock in struct serio was initialised. Signed-off-by:
Richard Hirst <rhirst@parisc-linux.org> Signed-off-by:
Kyle McMartin <kyle@parisc-linux.org>
-
Matthew Wilcox authored
Missing spin_lock_init() made the Mux driver hang on SMP systems. Fix up users of ->hpa to use ->hpa.start instead Remove warning in 8250_gsc.c by eliminating serial_line_nr Signed-off-by:
-
Matthew Wilcox authored
Fix lasi700 for James's ioread*be() changes Signed-off-by:
-
Randolph Chung authored
don't use *printf %f in the kernel, mm'kay? Signed-off-by:
Randolph Chung <tausq@parisc-linux.org> Signed-off-by:
-
Grant Grundler authored
.align applies to the current section - ie section directives come first. Thanks to Joel Soete for catching this. Signed-off-by:
Grant Grundler <grundler@parisc-linux.org> Signed-off-by:
-
Grant Grundler authored
fixup.S needs to specify .level and use correct LDREG macro. New binutils has a bug where it doesn't "promote" from PA1.0 to PA1.1 correctly when using ",s" completer. remove use of __LP64__ in assembly.h and add some white space. Signed-off-by:
-
Matthew Wilcox authored
Specify sr4 when flushing kernel space (we could equally well use sr5-7, but must not use sr0). Signed-off-by:
-
Grant Grundler authored
replace use of "0" with "%r0" since PA 1.1 I/D flush ops only take a general register and not an immediate value for the index field. This just forces the code to always be PA 1.1 "clean". From: Joel Soete <soete.joel@tiscali.be> Signed-off-by:
-
Grant Grundler authored
2.6.12-rc2-pa3 fix copy_user_page_asm to NOT access past end of page. My bad. /o\ Lamont confirmed that instructions following a conditional branch are *alway* executed regardless if the branch is taken or not. Unless they are nullified (which was missing in this case). He also noted: Conditional branches nullify on forward taken branch, and on non-taken backward branch. Note that .+4 is a backwards branch. This makes alot more sense than the giberish in the PA20 arch book. Compiles and boots on both 64-bit (a500) and 32-bit (j6k). Signed-off-by:
-
Sven Schnelle authored
add netpoll support Patch by Sven Schnelle <svens@gmx.de> Signed-off-by:
Sven Schnelle <svens@gmx.de> Signed-off-by:
-
James Bottomley authored
remove the spurious do_softirq calls from entry.S With these in we were calling do_softirq twice; plus the calls in entry.S took no account of nesting. Signed-off-by:
James Bottomley <jejb@parisc-linux.org> Signed-off-by:
-
Grant Grundler authored
drivers/infiniband depends on definition of pgprot_noncached() macro. Someone else will have to fix it's wrong. Signed-off-by: Grant Grundler <grundler@parisc-linux.org Signed-off-by: -
Kyle McMartin authored
Add IDs for some other STI graphics cards found on HP PA-RISC machines. Signed-off-by: -
Grant Grundler authored
add ECANCELED - SuSv3 wants one L. IB/SDP actually returns this error. Signed-off-by:
-
James Bottomley authored
Fix the alloc_slabmgmt panic Hopefully this should also fix a lot of other intermittent kernel bugs. The problem has been around since 2.6.9-rc2-pa6 when we allowed floating point registers to be used in kernel code. The essence of the problem is that gcc prefers to use floating point for integer divides and multiples. Further, it can rely on the values in the no clobber fp regs being correct across a function call. Unfortunately, our task switch function only saves the integer no clobber registers, not the fp ones, so if gcc makes a function call to any function in the kernel which could sleep, the values it is relying on in any no clobber floating point register may be lost. In the case of alloc_slabmgmt, the value of the page offset is being stored in %fr12 across a call to kmem_getpages(), which sleeps if no pages are available. Thus, the offset can be trashed and the slab code can end up with a completely bogus address leading to corruption. Kudos to Randolph who came up with the program to trip this problem at will and thus allowed it to be tracked and fixed. Signed-off-by:
-
Carlos O'Donell authored
* arch/parisc/kernel/process.c (sys_clone): Use 5 args, and process CLONE_PARENT_SETTID, CLONE_CHILD_SETTID, CLONE_CHILD_CLEARTID. (copy_thread): First cut at CLONE_SETTLS. Signed-off-by:
Carlos O'Donell <carlos@parisc-linux.org> Signed-off-by:
-
Grant Grundler authored
2.6.14-rc2-pa1: enable 100/250/1000HZ itimer selection Signed-off-by:
Thibaut VARENE <varenet@parisc-linux.org> Signed-off-by:
-
Randolph Chung authored
Prefix changed in debian, include "gnu" in the commandline. Signed-off-by:
-
Grant Grundler authored
Document history of PDC_NARROW a bit as it will still show up in an older kernel's .config file. Signed-off-by:
-
Jesper Juhl authored
2.6.12-rc2-pa2 kfree cleanups from Jesper Juhl Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
-
Grant Grundler authored
1) cleanup whitespace and handle proc_mkdir() failures. From: Christophe Lucas <clucas@rotomalug.org> 2) rename "dino" entry to "pcxl_dma"...also seems like it's in the wrong location. 3) don't dump resource bitmap in /proc/pcxl_dma output 4) fixup compiler warning Signed-off-by:
-
Grant Grundler authored
Generate a more informative message when a resource does not have a parent. Signed-off-by:
-
Matthew Wilcox authored
Get rid of some unnecessary includes Remove a layer of macro indirection around pdc_console_device Delete pdc_console_die() as it is unused Avoid double-printing on panic by clearing CON_PRINTBUFFER rather than setting con_start to be log_end Make con_start and log_end static again Signed-off-by:
-
Randolph Chung authored
2.6.13-rc6-pa2 use force_sigsegv() if we have a problem setting up a frame. This is required to prevent SIGSEGV loops. Signed-off-by:
-
Thibaut Varene authored
We're using fp regs now in the kernel, so we want to print them on stack dump Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
-
Randolph Chung authored
Disable use of fpregs in pa_memcpy, and turn on the -mdisable-fpregs flag. Signed-off-by:
-
Kyle McMartin authored
git commit 976ecd12 changed our locking characteristics, and put the onus of spin_lock_init on superio.c. Signed-off-by:
-
Grant Grundler authored
PA20 arch book (page 7-52 and 7-55) indicate a "sync" is required after the FDC "to enforce instruction ordering". And we want to make sure FIC is executed after FDC has retired. Signed-off-by:
-
Grant Grundler authored
minor cleanup: qualify constant with "UL" Acked-by:
"Hmamouche, Youssef" <youssef@ece.utexas.edu> Signed-off-by:
-
Grant Grundler authored
2.6.12-rc4-pa3 s/__LP64__/CONFIG_64BIT/ and fixup config.h usage Signed-off-by:
-
Grant Grundler authored
2.6.12-rc1-pa6 use work queue in LED/LCD driver instead of tasklet. Main advantage is it allows use of msleep() in the led_LCD_driver to "atomically" perform two MMIO writes (CMD, then DATA). Lead to nice cleanup of the main led_work_func() and led_LCD_driver(). Kudos to David for being persistent. From: David Pye <dmp@davidmpye.dyndns.org> Signed-off-by:
-
Jens Axboe authored
add syscall entries for ioprio_set/get as per Jens Axboe. Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Grant Grundler authored
Optimize ext2_find_next_zero_bit. Gives about 25% perf improvement with a rsync test with ext3. Signed-off-by:
-
Stuart Brady authored
update comment about CAFL_STRIDE Signed-off-by:
Stuart Brady <sdb@parisc-linux.org> Signed-off-by:
-
Kyle McMartin authored
Add support for changing unaligned trap behaviour on a per-thread basis. Signed-off-by: -
Randolph Chung authored
convert some bl calls to b,l or bv to use longer offsets Signed-off-by:
-
Stuart Brady authored
o Added a control for the input source (which can be either "line" or "mic") o Mute the speaker/line-out/headphone outputs by default. o Increased the buffer size from 10 pages to 16. Signed-off-by:
-
Randolph Chung authored
export profile_pc() symbol - oprofile needs it when built as a module. Signed-off-by:
-
Matthew Wilcox authored
Fix some whitespace issues Reorganise parisc_device probe routine to be a little less convoluted Use ->hpa.start instead of ->hpa Signed-off-by:
-
