- 26 Feb, 2010 40 commits
-
-
Márton Németh authored
The loop counter j is declared twice in function error_handler(). Remove the redundant declaration. This will remove the following sparse warning (see "make C=1"): * symbol 'j' shadows an earlier one Signed-off-by:
Márton Németh <nm127@freemail.hu> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Márton Németh authored
The second parameter of g_input_status operation in <media/v4l2-subdev.h> is unsigned so also call it with unsigned paramter. This will remove the following sparse warning (see "make C=1"): * incorrect type in argument 2 (different signedness) expected unsigned int [usertype] *status got int *<noident> Signed-off-by: -
Roel Kluin authored
The wrong command was printed for case CX2341X_ENC_SET_DNR_FILTER_MODE, and a typo in case CX2341X_ENC_SET_PCR_ID. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-By:
Steven Toth <stoth@kernellabs.com> Signed-off-by:
-
Stefan Richter authored
Before each FCP transdaction, the entire 512 bytes of the FCP frame were cleared, then values filled in. Clear only the bytes between filled-in bytes and end of the - request frame, or - response frame if data from a larger response will be needed, or - whole frame if data from a variable length response will be taken. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Stefan Richter authored
FCP transactions as well as CMP transactions were serialized with mutex_lock_interruptible. It is extremely unlikly though that a signal will arrive while a concurrent process holds the mutex. And even if one does, the duration of a transaction is reasonably short (1.2 seconds if all retries time out, usually much shorter). Hence simplify the code to plain mutex_lock. Signed-off-by:
-
Stefan Richter authored
This is a portability fix and reduces stack usage. The DMA mapping API cannot map on-stack addresses, as explained in Documentation/DMA-mapping.txt. Convert the two cases of on-stack packet payload buffers in firedtv (payload of write requests in avc_write and of lock requests in cmp_lock) to slab-allocated memory. We use the 512 bytes sized FCP frame buffer in struct firedtv for this purpose. Previously it held only incoming FCP responses, now it holds pending FCP requests and is then overwriten by an FCP response from the tuner subunit. Ditto for CMP lock requests and responses. Accesses to the payload buffer are serialized by fdtv->avc_mutex. As a welcome side effect, stack usage of the AV/C transaction functions is reduced by 512 bytes. Alas, avc_register_remote_control() is a special case: It previously did not wait for a response. To fit better in with the other FCP transactions, let it wait for an interim response. Signed-off-by:
-
Mauro Carvalho Chehab authored
WARNING: drivers/media/video/cx18/cx18-alsa.o(.text+0x4de): Section mismatch in reference from the function cx18_alsa_load() to the function .init.text:snd_cx18_init() The function cx18_alsa_load() references the function __init snd_cx18_init(). This is often because cx18_alsa_load lacks a __init annotation or the annotation of snd_cx18_init is wrong. WARNING: drivers/media/video/cx18/built-in.o(.text+0x1c022): Section mismatch in reference from the function cx18_alsa_load() to the function .init.text:snd_cx18_init() The function cx18_alsa_load() references the function __init snd_cx18_init(). This is often because cx18_alsa_load lacks a __init annotation or the annotation of snd_cx18_init is wrong. WARNING: drivers/media/video/built-in.o(.text+0x28cc56): Section mismatch in reference from the function cx18_alsa_load() to the function .init.text:snd_cx18_init() The function cx18_alsa_load() references the function __init snd_cx18_init(). This is often because cx18_alsa_load lacks a __init annotation or the annotation of snd_cx18_init is wrong. WARNING: drivers/media/built-in.o(.text+0x2d2432): Section mismatch in reference from the function cx18_alsa_load() to the function .init.text:snd_cx18_init() The function cx18_alsa_load() references the function __init snd_cx18_init(). This is often because cx18_alsa_load lacks a __init annotation or the annotation of snd_cx18_init is wrong. Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/video/cx18/cx18-driver.c:252: warning: ‘request_modules’ used but never defined Signed-off-by: -
Jean-Francois Moine authored
Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Antonio Ospite authored
Fix a regression, introduced in the driver split, which made the ov534 driver unusable. Plus, the debug message should reflect that we discard also packets beyond the expected frame size. Signed-off-by:
Antonio Ospite <ospite@studenti.unina.it> Signed-off-by:
-
Antonio Ospite authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
There is only one page to load (page 3 for pac7302 and page 4 for pac7311). Signed-off-by:
-
Hans de Goede authored
The sensors adcm2700, mc501cb and ov7620 cannot have the full height permitted by the zc3xx bridges. This change removes 8 pixels at the bottom of the images. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Huang Weiyi authored
Remove duplicated #include('s) in drivers/media/dvb/mantis/mantis_hif.c drivers/media/dvb/mantis/mantis_pci.c Signed-off-by:Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
Márton Németh authored
'extern' is not needed at function definition. This will remove the following sparse warning (see "make C=1"): * function 'dib0090_dcc_freq' with external linkage has definition Signed-off-by:
-
Márton Németh authored
The 3rd parameter v4l2_subdev_notify() is passed to the notify() callback which is a pointer, see <media/v4l2-subdev.h> and <media/v4l2-device.h>. This will remove the following sparse warning (see "make C=1"): * Using plain integer as NULL pointer Signed-off-by:
-
Márton Németh authored
Some functions are only used locally so mark them static. This will remove the following sparse warnings (see "make C=1"): * symbol 'extract_mask_pos' was not declared. Should it be static? * symbol 'stv0900_initialize' was not declared. Should it be static? * symbol 'stv0900_get_mclk_freq' was not declared. Should it be static? * symbol 'stv0900_set_mclk' was not declared. Should it be static? * symbol 'stv0900_get_err_count' was not declared. Should it be static? Signed-off-by:
-
Márton Németh authored
The functions stv0900_sw_algo() and stv0900_set_dvbs1_track_car_loop() are only used locally so mark them static. This will remove the following sparse warnings (see "make C=1"): * symbol 'stv0900_sw_algo' was not declared. Should it be static? * symbol 'stv0900_set_dvbs1_track_car_loop' was not declared. Should it be static? Signed-off-by:
-
Márton Németh authored
Remove the following sparse error (see "make C=1"): * error: incompatible types for operation (<) left side has type struct dvb_frontend * right side has type int Signed-off-by: -
Thiago Farina authored
drivers/media/dvb/dvb-core/dvb_frontend.c | 6 ++---- Signed-off-by:
Thiago Farina <tfransosi@gmail.com> Signed-off-by:
-
Márton Németh authored
Remove the following sparse warning (see "make C=1"): * warning: Using plain integer as NULL pointer Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Muralidharan Karicheri authored
This adds platform code for ccdc driver on DM355 and DM6446. 1) new ccdc platform devices added 2) added clock aliases master and slave for CCDC clocks 3) added dm355_ccdc_setup_pinmux() pin-mux setup hook in dm355 ccdc driver platform data Reviewed-by:
Vaibhav Hiremath <hvaibhav@ti.com> Reviewed-by:
Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by:
-
Muralidharan Karicheri authored
1) clocks are configured using generic clock names 2) converting the driver to a platform driver 3) cleanup - consolidate all static variables inside a structure, ccdc_cfg The ccdc driver now uses generic names for clocks - master and slave. On individual platforms these clocks will inherit from the platform specific clock. This will allow re-use of the driver for the same IP across different SoCs. Reviewed-by:
-
Muralidharan Karicheri authored
1) clocks are configured using generic clock names; 2) converts the driver to a platform driver; 3) cleanup - consolidate all static variables inside a structure, ccdc_cfg; The ccdc now uses a generic name for clocks. "master" and "slave". On individual platforms these clocks will inherit from the platform specific clock. This will allow re-use of the driver for the same IP across different SoCs. Updated based on Kevin's comments on clock configuration and error code (v3, v4). Reviewed-by:
-
Muralidharan Karicheri authored
1) removed the platform code and clk configuration. They are now part of ccdc driver (part of the ccdc patches and platform patches 2-4); 2) Added proper error codes for ccdc register function. Reviewed-by:
-
Pete Eberlein authored
The kernel i2c model uses right-aligned 7-bit i2c addresses, but the 2250 firmware uses an 8-bit address in the usb vendor request. A previous patch by Jean Delvare shifted the i2c addresses 1 bit to the right, and this patch fixes the write_reg function to shift it back before sending the vendor request. To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.htmlSigned-off-by:
Pete Eberlein <pete@sensoray.com> Signed-off-by:
-
Devin Heitmueller authored
Clarify the rates available for the device, and move the freeing of the buffer to the free routine instead of the close (per Takashi's suggestion). Thanks to Takashi Iwai for reviewing and providing feedback. This work was sponsored by ONELAN Limited. Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Devin Heitmueller authored
Eliminate the possibility of passing NULL to snd_card_free(). Thanks to Takashi Iwai for reviewing and pointing this out. This work was sponsored by ONELAN Limited. Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Devin Heitmueller authored
Move the cx18_alsa_announce_pcm_data() function further up in the file, since apparently "make checkpatch" has never heard of a forward declaration. Note that despite the hg diff showing everything else as having been deleted/added, in reality it was only that one function that got moved (and the forward declaration was removed from the top of the file). This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
Remove some dead code and make a PCM specific module debug parameter to avoid an extern reference. Signed-off-by:
-
Devin Heitmueller authored
Codingstyle fixes, some introduced as a result of the ALSA work, some pre-existing. This patch is a whitespace change only. This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
Fix codingstyle issues, and make the minimum version for cx18-alsa required to be 2.6.17, so that we don't need all the #ifdefs related to the changes to ALSA structures. This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
Address coding style issue with cx18-alsa-main.c This work was sponsored by ONELAN Limited. Signed-off-by:
-
Devin Heitmueller authored
If the stream is already in use, make sure we free up the memory allocated earlier. Thanks to Andy Wall for reviewing and pointing this out. This work was sponsored by ONELAN Limited. Signed-off-by:
-
