Skip to content

L
linux
Switch branch/tag
  1. 11 Dec, 2009 9 commits
    • Christoph Hellwig's avatar
      xfs: simplify xfs_buf_get / xfs_buf_read interfaces · 6ad112bf
      Christoph Hellwig authored 
      Currently the low-level buffer cache interfaces are highly confusing
as we have a _flags variant of each that does actually respect the
flags, and one without _flags which has a flags argument that gets
ignored and overriden with a default set.  Given that very few places
use the default arguments get rid of the duplication and convert all
callers to pass the flags explicitly.  Also remove the now confusing
_flags postfix.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarDave Chinner <david@fromorbit.com>
Signed-off-by: default avatarAlex Elder <aelder@sgi.com>
      6ad112bf
    • Christoph Hellwig's avatar
      xfs: remove IO_ISAIO · c355c656
      Christoph Hellwig authored 
      We set the IO_ISAIO flag for all read/write I/O since early Linux
2.6.x.  Remove it as it has lost it's purpose long ago.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarDave Chinner <david@fromorbit.com>
Reviewed-by: default avatarEric Sandeen <sandeen@sandeen.net>
Signed-off-by: default avatarAlex Elder <aelder@sgi.com>
      c355c656
    • Andy Poling's avatar
      xfs: Wrapped journal record corruption on read at recovery · fc5bc4c8
      Andy Poling authored 
      Summary of problem:

If a journal record wraps at the physical end of the journal, it has to be
read in two parts in xlog_do_recovery_pass(): a read at the physical end and a
read at the physical beginning.  If xlog_bread() has to re-align the first
read, the second read request does not take that re-alignment into account.
If the first read was re-aligned, the second read over-writes the end of the
data from the first read, effectively corrupting it.  This can happen either
when reading the record header or reading the record data.

The first sanity check in xlog_recover_process_data() is to check for a valid
clientid, so that is the error reported.

Summary of fix:

If there was a first read at the physical end, XFS_BUF_PTR() returns where the
data was requested to begin.  Conversely, because it is the result of
xlog_align(), offset indicates where the requested data for the first read
actually begins - whether or not xlog_bread() has re-aligned it.

Using offset as the base for the calculation of where to place the second read
data ensures that it will be correctly placed immediately following the data
from the first read instead of sometimes over-writing the end of it.

The attached patch has resolved the reported problem of occasional inability
to recover the journal (reporting "bad clientid").
Signed-off-by: default avatarAndy Poling <andy@realbig.com>
Reviewed-by: default avatarAlex Elder <aelder@sgi.com>
Signed-off-by: default avatarAlex Elder <aelder@sgi.com>
      fc5bc4c8
    • Christoph Hellwig's avatar
      xfs: cleanup data end I/O handlers · 5ec4fabb
      Christoph Hellwig authored 
      Currently we have different end I/O handlers for read vs the different
types of write I/O.  But they are all very similar so we could just
use one with a few conditionals and reduce code size a lot.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarAlex Elder <aelder@sgi.com>
Signed-off-by: default avatarAlex Elder <aelder@sgi.com>
      5ec4fabb
    • Christoph Hellwig's avatar
      xfs: use WRITE_SYNC_PLUG for synchronous writeout · 06342cf8
      Christoph Hellwig authored 
      The VM and I/O schedulers now expect us to use WRITE_SYNC_PLUG for
synchronous writeout.  Right now I can't see any changes in performance
numbers with this, but we're getting some beating for not using it,
and the knowledge definitely could help the block code to make better
decisions.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarAlex Elder <aelder@sgi.com>
Signed-off-by: default avatarAlex Elder <aelder@sgi.com>
      06342cf8
    • Christoph Hellwig's avatar
      xfs: reset the i_iolock lock class in the reclaim path · 033da48f
      Christoph Hellwig authored 
      The iolock is used for protecting reads, writes and block truncates
against each other.  We have two classes of callers, the first one is
induced by a file operation and requires a reference to the inode be
held and not dropped after the operation is done:

 - xfs_vm_vmap, xfs_vn_fallocate, xfs_read, xfs_write, xfs_splice_read,
   xfs_splice_write and xfs_setattr are all implementations of VFS
   methods that require a live inode
 - xfs_getbmap and xfs_swap_extents are ioctl subcommand for which the
   same is true
 - xfs_truncate_file is only called on quota inodes just returned from
   xfs_iget
 - xfs_sync_inode_data does the lock just after an igrab()
 - xfs_filestream_associate and xfs_filestream_new_ag take the iolock
   on the parent inode of an inode which by VFS rules must be referenced

And we have various calls to truncate blocks past EOF or the whole
file when dropping the last reference to an inode.  Unfortunately
lockdep complains when we do memory allocations that can recurse into
the filesystem in the first class because the second class happens to
take the same lock.  To avoid this re-init the iolock in the beginning
of xfs_fs_clear_inode to get a new lock class.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarAlex Elder <aelder@sgi.com>
Signed-off-by: default avatarAlex Elder <aelder@sgi.com>
      033da48f
    • Christoph Hellwig's avatar
      xfs: I/O completion handlers must use NOFS allocations · 80641dc6
      Christoph Hellwig authored 
      When completing I/O requests we must not allow the memory allocator to
recurse into the filesystem, as we might deadlock on waiting for the
I/O completion otherwise.  The only thing currently allocating normal
GFP_KERNEL memory is the allocation of the transaction structure for
the unwritten extent conversion.  Add a memflags argument to
_xfs_trans_alloc to allow controlling the allocator behaviour.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Reported-by: default avatarThomas Neumann <tneumann@users.sourceforge.net>
Tested-by: default avatarThomas Neumann <tneumann@users.sourceforge.net>
Reviewed-by: default avatarAlex Elder <aelder@sgi.com>
Signed-off-by: default avatarAlex Elder <aelder@sgi.com>
      80641dc6
    • Christoph Hellwig's avatar
      xfs: fix mmap_sem/iolock inversion in xfs_free_eofblocks · c56c9631
      Christoph Hellwig authored 
      When xfs_free_eofblocks is called from ->release the VM might already
hold the mmap_sem, but in the write path we take the iolock before
taking the mmap_sem in the generic write code.

Switch xfs_free_eofblocks to only trylock the iolock if called from
->release and skip trimming the prellocated blocks in that case.
We'll still free them later on the final iput.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarAlex Elder <aelder@sgi.com>
Signed-off-by: default avatarAlex Elder <aelder@sgi.com>
      c56c9631
    • Christoph Hellwig's avatar
      xfs: simplify inode teardown · 848ce8f7
      Christoph Hellwig authored 
      Currently the reclaim code for the case where we don't reclaim the
final reclaim is overly complicated.  We know that the inode is clean
but instead of just directly reclaiming the clean inode we go through
the whole process of marking the inode reclaimable just to directly
reclaim it from the calling context.  Besides being overly complicated
this introduces a race where iget could recycle an inode between
marked reclaimable and actually being reclaimed leading to panics.

This patch gets rid of the existing reclaim path, and replaces it with
a simple call to xfs_ireclaim if the inode was clean.  While we're at
it we also use the slightly more lax xfs_inode_clean check we'd use
later to determine if we need to flush the inode here.

Finally get rid of xfs_reclaim function and place the remaining small
bits of reclaim code directly into xfs_fs_destroy_inode.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Reported-by: default avatarPatrick Schreurs <patrick@news-service.com>
Reported-by: default avatarTommy van Leeuwen <tommy@news-service.com>
Tested-by: default avatarPatrick Schreurs <patrick@news-service.com>
Reviewed-by: default avatarAlex Elder <aelder@sgi.com>
Signed-off-by: default avatarAlex Elder <aelder@sgi.com>
      848ce8f7
  3. 03 Dec, 2009 1 commit
  5. 02 Dec, 2009 26 commits
  7. 01 Dec, 2009 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7