- 16 Feb, 2012 10 commits
-
-
Grant Likely authored
irq_domain_add_simple() was a stop-gap measure until complete irq_domain support was complete. This patch removes the irq_domain_add_simple() interface. This patch also drops the explicit irq_domain initialization performed by the mach-versatile code because the versatile interrupt controller already has irq_domain support built into it. This was a bug that was hanging around quietly for a while, but with the full irq_domain which actually verifies that irq_domain ranges are available it would cause the registration to fail and the system wouldn't boot. v4: Fixed number of irqs in mx5 gpio code v2: Updated to pass in host_data pointer on irq_domain allocation. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Cc: Russell King <linux@arm.linux.org.uk> Tested-by: Olof Johansson <olof@lixom.net>
-
Grant Likely authored
This patch removes the simplistic implementation of irq_domains and enables the powerpc infrastructure for all irq_domain users. The powerpc infrastructure includes support for complex mappings between Linux and hardware irq numbers, and can manage allocation of irq_descs. This patch also converts the few users of irq_domain_add()/irq_domain_del() to call irq_domain_add_legacy() instead. v3: Fix bug that set up too many irqs in translation range. v2: Fix removal of irq_alloc_descs() call in gic driver Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
-
Benoit Cousson authored
TWL4030 does handle 3 different interrupts ranges: 8 for the core, 8 for the power events and 18 for the GPIOs. Change the total number of interrupts managed by TWL4030 from 8 to 34. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-
Grant Likely authored
As the title says, this patch adds empty implementations for the address translation functions so that they can be used when CONFIG_OF is disabled. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com>
-
Grant Likely authored
Add support for a legacy mapping where irq = (hwirq - first_hwirq + first_irq) so that a controller driver can allocate a fixed range of irq_descs and use a simple calculation to translate back and forth between linux and hw irq numbers. This is needed to use an irq_domain with many of the ARM interrupt controller drivers that manage their own irq_desc allocations. Ultimately the goal is to migrate those drivers to use the linear revmap, but doing it this way allows each driver to be converted separately which makes the migration path easier. This patch generalizes the IRQ_DOMAIN_MAP_LEGACY method to use (first_irq-first_hwirq) as the offset between hwirq and linux irq number, and adds checks to make sure that the hwirq number does not exceed range assigned to the controller. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
-
Grant Likely authored
Each revmap type has different arguments for setting up the revmap. This patch splits up the generator functions so that each revmap type can do its own setup and the user doesn't need to keep track of how each revmap type handles the arguments. This patch also adds a host_data argument to the generators. There are cases where the host_data pointer will be needed before the function returns. ie. the legacy map calls the .map callback for each irq before returning. v2: - Add void *host_data argument to irq_domain_add_*() functions - fixed failure to compile - Moved IRQ_DOMAIN_MAP_* defines into irqdomain.c Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
-
Grant Likely authored
No functional changes. Replaces non-exported references to 'host' with domain. Does not change any symbol names referenced by other .c files. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
-
Grant Likely authored
zero always means no irq when using irq domains. Get rid of the NO_IRQ references. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
-
Grant Likely authored
This patch only moves the code. It doesn't make any changes, and the code is still only compiled for powerpc. Follow-on patches will generalize the code for other architectures. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
-
Grant Likely authored
There is only one user, and it is trivial to open-code. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
-
- 14 Feb, 2012 14 commits
-
-
Grant Likely authored
This patch drops the powerpc-specific irq_map table and replaces it with directly using the irq_alloc_desc()/irq_free_desc() interfaces for allocating and freeing irq_desc structures. This patch is a preparation step for generalizing the powerpc-specific virq infrastructure to become irq_domains. As part of this change, the irq_big_lock is changed to a mutex from a raw spinlock. There is no longer any need to use a spin lock since the irq_desc allocation code is now responsible for the critical section of finding an unused range of irq numbers. The radix lookup table is also changed to store the irq_data pointer instead of the irq_map entry since the irq_map is removed. This should end up being functionally equivalent since only allocated irq_descs are ever added to the radix tree. v5: - Really don't ever allocate virq 0. The previous version could still do it if hint == 0 - Respect irq_virq_count setting for NOMAP. Some NOMAP domains cannot use virq values above irq_virq_count. - Use numa_node_id() when allocating irq_descs. Ideally the API should obtain that value from the caller, but that touches a lot of call sites so will be deferred to a follow-on patch. - Fix irq_find_mapping() to include irq numbers lower than NUM_ISA_INTERRUPTS. With the switch to irq_alloc_desc*(), the lowest possible allocated irq is now returned by arch_probe_nr_irqs(). v4: - Fix incorrect access to irq_data structure in debugfs code - Don't ever allocate virq 0 Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
-
Grant Likely authored
This patch drops the powerpc-specific irq_host structures and uses the common irq_domain strucutres defined in linux/irqdomain.h. It also fixes all the users to use the new structure names. Renaming irq_host to irq_domain has been discussed for a long time, and this patch is a step in the process of generalizing the powerpc virq code to be usable by all architecture. An astute reader will notice that this patch actually removes the irq_host structure instead of renaming it. This is because the irq_domain structure already exists in include/linux/irqdomain.h and has the needed data members. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
-
Grant Likely authored
Trivial change, microblaze doesn't use irq remapping yet. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Michal Simek <monstr@monstr.eu> Cc: Thomas Gleixner <tglx@linutronix.de>
-
Grant Likely authored
Part of the series to unify the irq remapping mechanisms in the kernel. A follow up patch will copy the powerpc implementation into kernel/irq/irqdomain.c, which will be a lot easier if the structures are identical. Where they differ, I've chose to use the powerpc names since there is a lot more code using those names. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
-
Grant Likely authored
irq_domain printk's too much. Drop some output. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Olof Johansson <olof@lixom.net>
-
Grant Likely authored
Documentation for irq_domain library which will be created in subsequent patches. v4: editorial changes Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
sound fixes for 3.3-rc4 Basically all small fixes suited as rc4: a few HD-audio regression fixes, a stable fix for an old Dell laptop with intel8x0, and a simple fix for ASoC fsi. * tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: intel8x0: Fix default inaudible sound on Gateway M520 ALSA: hda - Fix silent speaker output on Acer Aspire 6935 ALSA: hda - Fix initialization of secondary capture source on VT1705 ASoC: fsi: fixup fsi_pointer() calculation method ALSA: hda - Fix mute-LED VREF value for new HP laptops
-
Daniel T Chen authored
BugLink: https://bugs.launchpad.net/bugs/930842 The reporter states that audio is inaudible by default without muting 'External Amplifier'. Add a quirk to handle his SSID so that changing the control is not necessary. Reported-and-tested-by: Benjamin Carlson <elderbubba0810@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/soundTakashi Iwai authored
A simple fix from Morimoto-san for the pointer() operation in the FSI driver.
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
* git://git.samba.org/sfrench/cifs-2.6: cifs: don't return error from standard_receive3 after marking response malformed cifs: request oplock when doing open on lookup cifs: fix error handling when cifscreds key payload is an error
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
This updates the sha512 fix so that it doesn't cause excessive stack usage on i386. This is done by reverting to the original code, and avoiding the W duplication by moving its initialisation into the loop. As the underlying code is in fact the one that we have used for years, I'm pushing this now instead of postponing to the next cycle. * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha512 - Avoid stack bloat on i386 crypto: sha512 - Use binary and instead of modulus
-
git://github.com/rustyrussell/linuxLinus Torvalds authored
* tag 'for-linus' of git://github.com/rustyrussell/linux: module: fix broken isapnp handling in file2alias module: make module param bint handle nul value
-
Ondrej Zary authored
Handling of isapnp module aliases was broken by commit 626596e2 by changing "isapnp" string to "isa". The code was then modified by commit e49ce141 but this bug remained. Change the string back to "isapnp". Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
-
Dave Young authored
Allow bint param accept nul values, just do same as bool param. Signed-off-by: Dave Young <dyoung@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
-
- 13 Feb, 2012 16 commits
-
-
git://git.infradead.org/users/cbou/battery-urgentLinus Torvalds authored
Just a few small fixes for a bunch of drivers. Nothing noteworthy. * tag 'battery-fixes-for-v3.3-rc2' of git://git.infradead.org/users/cbou/battery-urgent: lp8727_charger: Add terminating entry for i2c_device_id table power_supply: Fix modalias for charger-manager lp8727_chager: Fix permissions on a header file bq27x00_battery: Fix flag register read Revert "bq27x00_battery: Fix reporting status value for bq27500 battery"
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
Two bugfixes in XFS for 3.3: one fix passes KMEM_SLEEP to kmem_realloc instead of 0, and the other resolves a possible deadlock in xfs quotas. * 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: use a normal shrinker for the dquot freelist xfs: pass KM_SLEEP flag to kmem_realloc() in xlog_recover_add_to_cnt_trans()
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
This set of changes are fixing various section mismatch warnings which look to be completely valid. Primerily, those which are fixed are those which can cause oopses by manipulation of driver binding via sysfs. For example: calling code marked __init from driver probe __devinit functions. Some of these changes will be reworked at the next merge window when the underlying reasons are sorted out. In the mean time, I think it's important to have this fixed for correctness. Also included in this set are fixes to various error messages in OMAP - including making them gramatically correct, fixing a few spelling errors, and more importantly, making them greppable by unwrapping them. Tony Lindgren has acked all these patches, put them out for testing a week ago, and I've tested them on the platforms I have. * 'omap-fixes-warnings' of git://git.linaro.org/people/rmk/linux-arm: ARM: omap: resolve nebulous 'Error setting wl12xx data' ARM: omap: fix wrapped error messages in omap_hwmod.c ARM: omap: fix section mismatch warnings in mux.c caused by hsmmc.c ARM: omap: fix section mismatch warning for sdp3430_twl_gpio_setup() ARM: omap: fix section mismatch error for omap_4430sdp_display_init() ARM: omap: fix section mismatch warning for omap_secondary_startup() ARM: omap: preemptively fix section mismatch in omap4_sdp4430_wifi_mux_init() ARM: omap: fix section mismatch warning in mux.c ARM: omap: fix section mismatch errors in TWL PMIC driver ARM: omap: fix uninformative vc/i2c configuration error message ARM: omap: fix vc.c PMIC error message ARM: omap: fix prm44xx.c OMAP44XX_IRQ_PRCM build error
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
This pull request covers the major oopsing issues with OMAP, caused by the lack of the TWL driver. Even when the TWL driver is not built in, we shouldn't oops. * 'omap-fixes-urgent' of git://git.linaro.org/people/rmk/linux-arm: ARM: omap: fix broken twl-core dependencies and ifdefs ARM: omap: fix oops in drivers/video/omap2/dss/dpi.c ARM: omap: fix oops in arch/arm/mach-omap2/vp.c when pmic is not found
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7322/1: Print BUG instead of undefined instruction on BUG_ON() ARM: 7321/1: cache-v7: Disable preemption when reading CCSIDR ARM: 7320/1: Fix proc_info table alignment
-
Linus Torvalds authored
Some code - especially the crypto layer - wants to use the x86 FP/MMX/AVX register set in what may be interrupt (typically softirq) context. That *can* be ok, but the tests for when it was ok were somewhat suspect. We cannot touch the thread-specific status bits either, so we'd better check that we're not going to try to save FP state or anything like that. Now, it may be that the TS bit is always cleared *before* we set the USEDFPU bit (and only set when we had already cleared the USEDFP before), so the TS bit test may actually have been sufficient, but it certainly was not obviously so. So this explicitly verifies that we will not touch the TS_USEDFPU bit, and adds a few related sanity-checks. Because it seems that somehow AES-NI is corrupting user FP state. The cause is not clear, and this patch doesn't fix it, but while debugging it I really wanted the code to be more obviously correct and robust. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
It was marked asmlinkage for some really old and stale legacy reasons. Fix that and the equally stale comment. Noticed when debugging the irq_fpu_usable() bugs. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Takashi Iwai authored
Conflicts: sound/pci/hda/patch_realtek.c Merged back the fix for Acer Aspire 6935 with ALC889 codec. The fix commit was based on 3.2 kernel so that it can be applied to stable kernel cleanly.
-
Takashi Iwai authored
Since 3.2 kernel, the driver starts trying to assign the multi-io DACs before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for the speaker for a standard laptop setup like a HP, a speaker, a mic-in and a line-in. However, on Acer Aspire 6935, it seems that the speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it results in silence by some reason, although the codec itself allows the routing to DAC3/4. As a workaround, the connection list of each pin is reduced to be mapped to either only DAC1/2 or DAC3/4, so that the compatible assignment as in kernel 3.1 is achieved. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
VT1705 codec has two ADCs where the secondary ADC has no MUX but only a fixed connection to the mic pin. This confused the driver and it tries always overriding the input-source selection by assumption of the existing MUX for the secondary ADC, resulted in resetting the input-source at each time PM (including power-saving) occurs. The fix is simply to check the existence of MUX for secondary ADCs in the initialization code. Tested-by: Anisse Astier <anisse@astier.eu> Cc: <stable@kernel.org> [v3.1+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Russell King authored
It's useful to print the error code when a called function fails so a diagnosis of why it failed is possible. In this case, it fails because we try to register some data for the wl12xx driver, but as the driver is not configured, a stub function is used which simply returns -ENOSYS. Let's do the simple thing for -rc and print the error code. Also, the return code from platform_register_device() at each of these sites was not being checked. Add some checking, and again print the error code. This should be fixed properly for the next merge window so we don't issue error messages merely because a driver is not configured. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
While trying to debug my OMAP platforms, they emitted this message: omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state The following backtrace said it was from a function called '_enable', which didn't provide much clue. Grepping didn't find it either. The message is wrapped, so unwrap the message so grep can find it. Do the same for three other messages in this file. Acked-by: Paul Walmsley <paul@pwsan.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
The previous commit causes new section mismatch warnings: WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb30): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_gpio() The function omap_init_hsmmc() references the function __init omap_mux_init_gpio(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_gpio is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb4c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_gpio() The function omap_init_hsmmc() references the function __init omap_mux_init_gpio(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_gpio is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb60): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb6c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb78): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb90): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb9c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdba8): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbc0): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbcc): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbd8): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbf8): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc04): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc10): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc28): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc34): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc40): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc58): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc64): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc70): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc7c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. Again, as for omap2_hsmmc_init(), these functions are callable at runtime via the gpio-twl4030.c driver, and so these can't be marked __init. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xd0f0): Section mismatch in reference from the function sdp3430_twl_gpio_setup() to the function .init.text:omap2_hsmmc_init() The function sdp3430_twl_gpio_setup() references the function __init omap2_hsmmc_init(). This is often because sdp3430_twl_gpio_setup lacks a __init annotation or the annotation of omap2_hsmmc_init is wrong. sdp3430_twl_gpio_setup() is called via platform data from the gpio-twl4030 module, which can be inserted and removed at runtime. This makes sdp3430_twl_gpio_setup() callable at runtime, and prevents it being marked with an __init annotation. As it calls omap2_hsmmc_init() unconditionally, the only resolution to this warning is to remove the __init markings from omap2_hsmmc_init() and its called functions. This addresses the functions in hsmmc.c. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xb798): Section mismatch in reference from the function omap_4430sdp_display_init() to the function .init.text:omap_display_init() The function omap_4430sdp_display_init() references the function __init omap_display_init(). This is often because omap_4430sdp_display_init lacks a __init annotation or the annotation of omap_display_init is wrong. Fix this by adding __init to omap_4430sdp_display_init(). Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
WARNING: vmlinux.o(.text+0x1c664): Section mismatch in reference from the function omap_secondary_startup() to the function .cpuinit.text:secondary_startup() The function omap_secondary_startup() references the function __cpuinit secondary_startup(). This is often because omap_secondary_startup lacks a __cpuinit annotation or the annotation of secondary_startup is wrong. Unfortunately, fixing this causes a new warning which is harder to solve: WARNING: arch/arm/mach-omap2/built-in.o(.text+0x5328): Section mismatch in reference from the function omap4_hotplug_cpu() to the function .cpuinit.text:omap_secondary_startup() The function omap4_hotplug_cpu() references the function __cpuinit omap_secondary_startup(). This is often because omap4_hotplug_cpu lacks a __cpuinit annotation or the annotation of omap_secondary_startup is wrong. because omap4_hotplug_cpu() is used by power management code as well, which may not end up using omap_secondary_startup(). Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-