- 04 Oct, 2016 40 commits
-
-
Matt Redfearn authored
Checkpatch complains about use of bare unsigned type. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14217/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Aaro Koskinen authored
Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14250/Signed-off-by:
-
Aaro Koskinen authored
Signed-off-by:
-
Aaro Koskinen authored
Signed-off-by:
-
Aaro Koskinen authored
Signed-off-by:
-
Aaro Koskinen authored
PHY access through the board helper is impossible with the current drivers, so delete this code. Signed-off-by:
-
Aaro Koskinen authored
Signed-off-by:
-
Aaro Koskinen authored
Signed-off-by:
-
Aaro Koskinen authored
Leave that to actual ethernet/phy drivers. Signed-off-by:
-
Aaro Koskinen authored
Delete legacy hack for broken bootloaders. The warning has been in kernel for several years, and if there are still users using such bootloaders, they can fix the boot by supplying a proper DTB. Signed-off-by:
-
Masahiro Yamada authored
In many of clk_disable() implementations, it is a no-op for a NULL pointer input, but this is one of the exceptions. Making it treewide consistent will allow clock consumers to call clk_disable() without NULL pointer check. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-arm-kernel@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/14264/Signed-off-by:
-
Keith Busch authored
This patch removes creating a fake pci device in MIPS early config access and instead just uses the pci bus to get the same functionality. The struct pci_dev is too large to allocate on the stack, and was relying on compiler optimizations to remove its usage. Signed-off-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14253/Signed-off-by:
-
Geert Uytterhoeven authored
Replace the custom minimal clock implementation for Toshiba TXx9 by a basic implementation using the Common Clock Framework. The only clocks that are provided are those needed by TXx9-specific drivers ("imbus" and "spi" (TX4938 only)), and their common parent clock "gbus". Other clocks can be added when needed. Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Reviewed-by:
-
Geert Uytterhoeven authored
While the custom minimal TXx9 clock implementation doesn't need or use clock (un)prepare calls (they are dummies if !CONFIG_HAVE_CLK_PREPARE), they are mandatory when using the Common Clock Framework. Hence add them, to prepare for the advent of CCF. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-watchdog@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14238/Signed-off-by:
-
Geert Uytterhoeven authored
txx9_gpio_init() calls gpiochip_add_data(), which fails with -ENOMEM as it is called too early in the boot process. This causes all subsequent GPIO operations to fail silently (before commit 54d77198 ("gpio: bail out silently on NULL descriptors") it printed the error message "gpiod_direction_output_raw: invalid GPIO" on RBTX49[23]7). Postpone all GPIO setup to .arch_init() time to fix this. Suggested-by:
Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14237/Signed-off-by:
-
Geert Uytterhoeven authored
txx9_gpio_init() calls gpiochip_add_data(), which fails with -ENOMEM as it is called too early in the boot process. This causes all subsequent GPIO operations to fail silently. Postpone all GPIO setup to .arch_init() time to fix this. Suggested-by:
-
Masahiro Yamada authored
Remove unneeded variables and assignments. Signed-off-by:
-
Yang Ling authored
The patch adds RTC support for Loongson1C board, and enable the external crystal when the RTC is first powered up. Signed-off-by:
Yang Ling <gnaygnil@gmail.com> Cc: keguang.zhang@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14214/Signed-off-by:
-
Paul Gortmaker authored
These files were only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile these files. In the case of traps.c we can't dump the module.h include since it is also used to provide "print_modules". Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13934/Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: arch/mips/lantiq/Kconfig:config XRX200_PHY_FW arch/mips/lantiq/Kconfig: bool "XRX200 PHY firmware loader" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. We don't replace module.h with init.h since the file doesn't need that. Signed-off-by:
-
Paul Gortmaker authored
The Makefile entry controlling compilation of this code is: arch/mips/lantiq/xway/vmmc.o ---> arch/mips/lantiq/xway/Makefile:obj-y += vmmc.o ...meaning that it currently is not being built as a module by anyone. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We replace module.h with export.h since the file does actually use EXPORT_SYMBOL. Signed-off-by:
-
Paul Gortmaker authored
The Makefile entry controlling compilation of this code is "obj-y" meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. We don't replace module.h with init.h since the file already has that. Signed-off-by:
-
Paul Gortmaker authored
The Makefile entry controlling compilation of this code is "obj-y" meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Signed-off-by:
-
Matt Redfearn authored
Commit 7eb8c99d ("MIPS: Delete smp-gic.c") removed the file from the Makefile and the option to build it from KConfig, but left the file itself floating in the tree. Remove the unused source file. Signed-off-by:
-
Fabian Frederick authored
According to commit 9f6b6877 ("android: remove timed output/gpio driver") Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13904/Signed-off-by:
-
Markus Elfring authored
The field "owner" is set by the core. Thus delete an unneeded initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Cc: John Crispin <john@phrozen.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13929/Signed-off-by:
-
Matt Redfearn authored
The addition of VPE information to /proc/cpuinfo used to be in smp-mt.c. This file is not used by MIPS r6 kernels, so the Virtual Processor information was not present for these CPU types. Move the code to print VPE information into proc.c, add a case for MIPS r6 CPUS, and remove the block from smp-mt.c. Signed-off-by:
-
Yang Ling authored
Signed-off-by:
-
Yang Ling authored
Adds basic platform devices for Loongson1C, including serial port and ethernet. Signed-off-by:
-
Yang Ling authored
Loongson1C is a 32-bit SoC designed by Loongson Technology Co., Ltd, with many features similar to Loongson1B. Signed-off-by:
-
Aaro Koskinen authored
Rename upper case variables. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by:
David Daney <david.daney@cavium.com> Cc: Sivasubramanian Palanisamy <sivasubramanian.palanisamy@nokia.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13352/Signed-off-by:
-
Aaro Koskinen authored
Take all memory into use by default, instead of limiting to 512 MB. Signed-off-by:
-
Álvaro Fernández Rojas authored
This adds a device tree example for SFR NeufBox 6. Signed-off-by:
Álvaro Fernández Rojas <noltari@gmail.com> Cc: f.fainelli@gmail.com Cc: jogo@openwrt.org Cc: cernekee@gmail.com Cc: robh@kernel.org Cc: simon@fire.lp0.eu Cc: john@phrozen.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13844/Signed-off-by:
-
Álvaro Fernández Rojas authored
BCM6362 is a BMIPS4350 SoC which needs the same fixup as BCM6368 in order to enable SMP support. Signed-off-by:
-
Álvaro Fernández Rojas authored
This adds a device tree example for Netgear CVG834G. Signed-off-by:
-
Álvaro Fernández Rojas authored
BCM3368 has a shared TLB which conflicts with current SMP support, so it must be disabled for now. Signed-off-by:
-
Álvaro Fernández Rojas authored
This adds a device tree example for Comtrend VR-3032u, which also serves as a real example for brcm,bcm6328-leds. Signed-off-by:
-
Álvaro Fernández Rojas authored
The prefix bcm9* should only be used for reference and evaluation boards from Broadcom. Also adds missing console output to bootargs. Signed-off-by:
-
Álvaro Fernández Rojas authored
Commit 380e4270 added support for bcm97435svmb.dtb but missed adding it to DT_NONE. Also refactor DT_NONE dtbs in order to add larger names in the future. Signed-off-by:
-
Paul Gortmaker authored
Only one defconfig has a STACKPROTECTOR value. And it asks for the strong variant, which isn't supported by older toolchains. Due to the nature of MIPS having more platform specific code than say x86, the allyesconfig and allmodconfig aren't as effective for build coverage. So, in addition, I like to use a trivial script to walk all the defconfigs and build each one. However I will get false positives on unsupported stackprotector values with an older toolchain like gcc-4.6.3. As in this instance I am just using the compiler as a glorified syntax checker on a machine where I build a bunch of other arch for the same reason, there is no real motivation to get a newer toolchain for improved optimization etc. Since there is only one of them, and there is nothing about these settings that are board/platform specific, I propose we just eliminate the existing instance and take the default. Signed-off-by:
James Hartley <james.hartley@imgtec.com> Cc: Ionela Voinescu <ionela.voinescu@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13846/Signed-off-by:
-
