Signed-off-by: Jon Ernst <jonernst07@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

There is a bug in ext4_ext_shift_path_extents() where if we actually
manage to merge a extent we would skip shifting the next extent. This
will result in in one extent in the extent tree not being properly
shifted.

This is causing failure in various xfstests tests using fsx or fsstress
with collapse range support. It will also cause file system corruption
which looks something like:

 e2fsck 1.42.9 (4-Feb-2014)
 Pass 1: Checking inodes, blocks, and sizes
 Inode 20 has out of order extents
        (invalid logical block 3, physical block 492938, len 2)
 Clear? yes
 ...

when running e2fsck.

It's also very easily reproducible just by running fsx without any
parameters. I can usually hit the problem within a minute.

Fix it by increasing ex_start only if we're not merging the extent.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>

Currently in ext4_collapse_range() and ext4_punch_hole() we're
discarding preallocation twice. Once before we attempt to do any changes
and second time after we're done with the changes.

While the second call to ext4_discard_preallocations() in
ext4_punch_hole() case is not needed, we need to discard preallocation
right after ext4_ext_remove_space() in collapse range case because in
the case we had to restart a transaction in the middle of removing space
we might have new preallocations created.

Remove unneeded ext4_discard_preallocations() ext4_punch_hole() and move
it to the better place in ext4_collapse_range()
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

We're already calling truncate_pagecache() before we attempt to do any
actual job so there is not need to truncate pagecache once more using
truncate_setsize() after we're finished.

Remove truncate_setsize() and replace it just with i_size_write() note
that we're holding appropriate locks.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Currently in ext4_collapse_range() when calling ext4_es_remove_extent() to
remove status extents we're passing (EXT_MAX_BLOCKS - punch_start - 1)
in order to remove all extents from start of the collapse range to the
end of the file. However this is wrong because we might miss the
possible extent covering the last block of the file.

Fix it by removing the -1.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com>

Currently we're passing -1 as lend argumnet for
filemap_write_and_wait_range() which is wrong since lend is signed type
so it would cause some confusion and we might not write_and_wait for the
entire range we're expecting to write.

Fix it by using LLONG_MAX instead.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

We should be using truncate_pagecache() instead of
truncate_pagecache_range() in the collapse range because we're
truncating page cache from offset to the end of file.
truncate_pagecache() also get rid of the private COWed pages from the
range because we're going to shift the end of the file.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

In retrospect, this was a bad way to handle things, since it limited
testing of these patches.  We should just get the VFS level changes
merged in first.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

With bigalloc enabled we must use EXT4_CLUSTERS_PER_GROUP() instead of
EXT4_BLOCKS_PER_GROUP() otherwise we will go beyond the allocated buffer.

$ mount -t ext4 /dev/vde /vde
[   70.573993] EXT4-fs DEBUG (fs/ext4/mballoc.c, 2346): ext4_mb_alloc_groupinfo:
[   70.575174] allocated s_groupinfo array for 1 meta_bg's
[   70.576172] EXT4-fs DEBUG (fs/ext4/super.c, 2092): ext4_check_descriptors:
[   70.576972] Checking group descriptorsBUG: unable to handle kernel paging request at ffff88006ab56000
[   72.463686] IP: [<ffffffff81394eb9>] __bitmap_weight+0x2a/0x7f
[   72.464168] PGD 295e067 PUD 2961067 PMD 7fa8e067 PTE 800000006ab56060
[   72.464738] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[   72.465139] Modules linked in:
[   72.465402] CPU: 1 PID: 3560 Comm: mount Tainted: G        W    3.14.0-rc2-00069-ge57bce1 #60
[   72.466079] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[   72.466505] task: ffff88007ce6c8a0 ti: ffff88006b7f0000 task.ti: ffff88006b7f0000
[   72.466505] RIP: 0010:[<ffffffff81394eb9>]  [<ffffffff81394eb9>] __bitmap_weight+0x2a/0x7f
[   72.466505] RSP: 0018:ffff88006b7f1c00  EFLAGS: 00010206
[   72.466505] RAX: 0000000000000000 RBX: 000000000000050a RCX: 0000000000000040
[   72.466505] RDX: 0000000000000000 RSI: 0000000000080000 RDI: 0000000000000000
[   72.466505] RBP: ffff88006b7f1c28 R08: 0000000000000002 R09: 0000000000000000
[   72.466505] R10: 000000000000babe R11: 0000000000000400 R12: 0000000000080000
[   72.466505] R13: 0000000000000200 R14: 0000000000002000 R15: ffff88006ab55000
[   72.466505] FS:  00007f43ba1fa840(0000) GS:ffff88007f800000(0000) knlGS:0000000000000000
[   72.466505] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   72.466505] CR2: ffff88006ab56000 CR3: 000000006b7e6000 CR4: 00000000000006e0
[   72.466505] Stack:
[   72.466505]  ffff88006ab65000 0000000000000000 0000000000000000 0000000000010000
[   72.466505]  ffff88006ab6f400 ffff88006b7f1c58 ffffffff81396bb8 0000000000010000
[   72.466505]  0000000000000000 ffff88007b869a90 ffff88006a48a000 ffff88006b7f1c70
[   72.466505] Call Trace:
[   72.466505]  [<ffffffff81396bb8>] memweight+0x5f/0x8a
[   72.466505]  [<ffffffff811c3b19>] ext4_count_free+0x13/0x21
[   72.466505]  [<ffffffff811c396c>] ext4_count_free_clusters+0xdb/0x171
[   72.466505]  [<ffffffff811e3bdd>] ext4_fill_super+0x117c/0x28ef
[   72.466505]  [<ffffffff81391569>] ? vsnprintf+0x1c7/0x3f7
[   72.466505]  [<ffffffff8114d8dc>] mount_bdev+0x145/0x19c
[   72.466505]  [<ffffffff811e2a61>] ? ext4_calculate_overhead+0x2a1/0x2a1
[   72.466505]  [<ffffffff811dab1d>] ext4_mount+0x15/0x17
[   72.466505]  [<ffffffff8114e3aa>] mount_fs+0x67/0x150
[   72.466505]  [<ffffffff811637ea>] vfs_kern_mount+0x64/0xde
[   72.466505]  [<ffffffff81165d19>] do_mount+0x6fe/0x7f5
[   72.466505]  [<ffffffff81126cc8>] ? strndup_user+0x3a/0xd9
[   72.466505]  [<ffffffff8116604b>] SyS_mount+0x85/0xbe
[   72.466505]  [<ffffffff81619e90>] tracesys+0xdd/0xe2
[   72.466505] Code: c3 89 f0 b9 40 00 00 00 55 99 48 89 e5 41 57 f7 f9 41 56 49 89 ff 41 55 45 31 ed 41 54 41 89 f4 53 31 db 41 89 c6 45 39 ee 7e 10 <4b> 8b 3c ef 49 ff c5 e8 bf ff ff ff 01 c3 eb eb 31 c0 45 85 f6
[   72.466505] RIP  [<ffffffff81394eb9>] __bitmap_weight+0x2a/0x7f
[   72.466505]  RSP <ffff88006b7f1c00>
[   72.466505] CR2: ffff88006ab56000
[   72.466505] ---[ end trace 7d051a08ae138573 ]---
Killed
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Where are some places where logic guaranties us that extent we are
searching exits, but this may not be true due to on-disk data
corruption. If such corruption happens we must prevent possible
null pointer dereferences.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Fix error handling by adding some.  :-)
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

This fixes the following sparse warning:

     CHECK   fs/ext4/mballoc.c
   fs/ext4/mballoc.c:5019:9: warning: context imbalance in
   'ext4_trim_extent' - unexpected unlock
Signed-off-by: "Jon Ernst" <jonernst07@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Unfortunately, we weren't checking to make sure of this the inode was
extent-based before attempt operate on it.  Hilarity ensues.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Namjae Jeon <namjae.jeon@samsung.com>

This commit tries to fix some byte order issues that is found by sparse
check.

$ make M=fs/ext4 C=2 CF=-D__CHECK_ENDIAN__
...
  CHECK   fs/ext4/extents.c
fs/ext4/extents.c:5232:41: warning: restricted __le32 degrades to integer
fs/ext4/extents.c:5236:52: warning: bad assignment (-=) to restricted __le32
fs/ext4/extents.c:5258:45: warning: bad assignment (-=) to restricted __le32
fs/ext4/extents.c:5303:28: warning: restricted __le32 degrades to integer
fs/ext4/extents.c:5318:18: warning: incorrect type in assignment (different base types)
fs/ext4/extents.c:5318:18:    expected unsigned int [unsigned] [usertype] ex_start
fs/ext4/extents.c:5318:18:    got restricted __le32 [usertype] ee_block
fs/ext4/extents.c:5319:24: warning: restricted __le32 degrades to integer
fs/ext4/extents.c:5334:31: warning: incorrect type in assignment (different base types)
...

Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

We haven't taken i_mutex yet, so we need to use i_size_read().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Currently some file system have IS_SWAPFILE check in their fallocate
implementations and some do not. However we should really prevent any
fallocate operation on swapfile so move the check to vfs and remove the
redundant checks from the file systems fallocate implementations.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Currently in do_fallocate in collapse range case we're checking
whether offset + len is not bigger than i_size.  However there is
nothing which would prevent i_size from changing so the check is
pointless.  It should be done in the file system itself and the file
system needs to make sure that i_size is not going to change.  The
i_size check for the other fallocate modes are also done in the
filesystems.

As it is now we can easily crash the kernel by having two processes
doing truncate and fallocate collapse range at the same time.  This
can be reproduced on ext4 and it is theoretically possible on xfs even
though I was not able to trigger it with this simple test.

This commit removes the check from do_fallocate and adds it to the
file system.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Currently punch hole and collapse range fallocate operation are not
allowed on append only file. This should be case for zero range as well.
Fix it by allowing only pure fallocate (possibly with keep size set).
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

All the checks IS_APPEND and IS_IMMUTABLE for the fallocate operation on
the inode are done in vfs. No need to do this again in ext4. Remove it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

The function ext4_update_i_disksize() is used in only one place, in
the function mpage_map_and_submit_extent().  Move its code to simplify
the code paths, and also move the call to ext4_mark_inode_dirty() into
the i_data_sem's critical region, to be consistent with all of the
other places where we update i_disksize.  That way, we also keep the
raw_inode's i_disksize protected, to avoid the following race:

      CPU #1                                 CPU #2

   down_write(&i_data_sem)
   Modify i_disk_size
   up_write(&i_data_sem)
                                        down_write(&i_data_sem)
                                        Modify i_disk_size
                                        Copy i_disk_size to on-disk inode
                                        up_write(&i_data_sem)
   Copy i_disk_size to on-disk inode
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org

Return ENOMEM rather than EIO when find_get_page() fails in
ext4_mb_get_buddy_page_lock() and find_or_create_page() fails in
ext4_mb_load_buddy().
Signed-off-by: Younger Liu <younger.liucn@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

When mounting ext4 with data=journal option, xfstest shared/002 and
shared/004 are currently failing as checksum computed for testfile
does not match with the checksum computed in other journal modes.
In case of data=journal mode, a call to filemap_write_and_wait_range
will not flush anything to disk as buffers are not marked dirty in
write_end. In collapse range this call is followed by a call to
truncate_pagecache_range. Due to this, when checksum is computed,
a portion of file is re-read from disk which replace valid data with
NULL bytes and hence the reason for the difference in checksum.

Calling ext4_force_commit before filemap_write_and_wait_range solves
the issue as it will mark the buffers dirty during commit transaction
which can be later synced by a call to filemap_write_and_wait_range.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

The special handling of PF_MEMALLOC callers in ext4_write_inode()
shouldn't be necessary as there shouldn't be any. Warn about it. Also
update comment before the function as it seems somewhat outdated.

(Changes modeled on an ext3 patch posted by Jan Kara to the linux-ext4
mailing list on Februaryt 28, 2014, which apparently never went into
the ext3 tree.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>

When heavily exercising xattr code the assertion that
jbd2_journal_dirty_metadata() shouldn't return error was triggered:

WARNING: at /srv/autobuild-ceph/gitbuilder.git/build/fs/jbd2/transaction.c:1237
jbd2_journal_dirty_metadata+0x1ba/0x260()

CPU: 0 PID: 8877 Comm: ceph-osd Tainted: G    W 3.10.0-ceph-00049-g68d04c9 #1
Hardware name: Dell Inc. PowerEdge R410/01V648, BIOS 1.6.3 02/07/2011
 ffffffff81a1d3c8 ffff880214469928 ffffffff816311b0 ffff880214469968
 ffffffff8103fae0 ffff880214469958 ffff880170a9dc30 ffff8802240fbe80
 0000000000000000 ffff88020b366000 ffff8802256e7510 ffff880214469978
Call Trace:
 [<ffffffff816311b0>] dump_stack+0x19/0x1b
 [<ffffffff8103fae0>] warn_slowpath_common+0x70/0xa0
 [<ffffffff8103fb2a>] warn_slowpath_null+0x1a/0x20
 [<ffffffff81267c2a>] jbd2_journal_dirty_metadata+0x1ba/0x260
 [<ffffffff81245093>] __ext4_handle_dirty_metadata+0xa3/0x140
 [<ffffffff812561f3>] ext4_xattr_release_block+0x103/0x1f0
 [<ffffffff81256680>] ext4_xattr_block_set+0x1e0/0x910
 [<ffffffff8125795b>] ext4_xattr_set_handle+0x38b/0x4a0
 [<ffffffff810a319d>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff81257b32>] ext4_xattr_set+0xc2/0x140
 [<ffffffff81258547>] ext4_xattr_user_set+0x47/0x50
 [<ffffffff811935ce>] generic_setxattr+0x6e/0x90
 [<ffffffff81193ecb>] __vfs_setxattr_noperm+0x7b/0x1c0
 [<ffffffff811940d4>] vfs_setxattr+0xc4/0xd0
 [<ffffffff8119421e>] setxattr+0x13e/0x1e0
 [<ffffffff811719c7>] ? __sb_start_write+0xe7/0x1b0
 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60
 [<ffffffff8118c65c>] ? fget_light+0x3c/0x130
 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60
 [<ffffffff8118f1f8>] ? __mnt_want_write+0x58/0x70
 [<ffffffff811946be>] SyS_fsetxattr+0xbe/0x100
 [<ffffffff816407c2>] system_call_fastpath+0x16/0x1b

The reason for the warning is that buffer_head passed into
jbd2_journal_dirty_metadata() didn't have journal_head attached. This is
caused by the following race of two ext4_xattr_release_block() calls:

CPU1                                CPU2
ext4_xattr_release_block()          ext4_xattr_release_block()
lock_buffer(bh);
/* False */
if (BHDR(bh)->h_refcount == cpu_to_le32(1))
} else {
  le32_add_cpu(&BHDR(bh)->h_refcount, -1);
  unlock_buffer(bh);
                                    lock_buffer(bh);
                                    /* True */
                                    if (BHDR(bh)->h_refcount == cpu_to_le32(1))
                                      get_bh(bh);
                                      ext4_free_blocks()
                                        ...
                                        jbd2_journal_forget()
                                          jbd2_journal_unfile_buffer()
                                          -> JH is gone
  error = ext4_handle_dirty_xattr_block(handle, inode, bh);
  -> triggers the warning

We fix the problem by moving ext4_handle_dirty_xattr_block() under the
buffer lock. Sadly this cannot be done in nojournal mode as that
function can call sync_dirty_buffer() which would deadlock. Luckily in
nojournal mode the race is harmless (we only dirty already freed buffer)
and thus for nojournal mode we leave the dirtying outside of the buffer
lock.
Reported-by: Sage Weil <sage@inktank.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

ext4_end_bio() currently throws away the error that it receives.  Chances
are this is part of a spate of errors, one of which will end up getting
the error returned to userspace somehow, but we shouldn't take that risk.
Also print out the errno to aid in debug.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org

With EXT4FS_DEBUG ext4_count_free_clusters() will call
ext4_read_block_bitmap() without s_group_info initialized, so we need to
initialize multi-block allocator before.

And dependencies that must be solved, to allow this:
- multi-block allocator needs in group descriptors
- need to install s_op before initializing multi-block allocator,
  because in ext4_mb_init_backend() new inode is created.
- initialize number of group desc blocks (s_gdb_count) otherwise
  number of clusters returned by ext4_free_clusters_after_init() is not correct.
  (see ext4_bg_num_gdb_nometa())

Here is the stack backtrace:

(gdb) bt
 #0  ext4_get_group_info (group=0, sb=0xffff880079a10000) at ext4.h:2430
 #1  ext4_validate_block_bitmap (sb=sb@entry=0xffff880079a10000,
     desc=desc@entry=0xffff880056510000, block_group=block_group@entry=0,
     bh=bh@entry=0xffff88007bf2b2d8) at balloc.c:358
 #2  0xffffffff81232202 in ext4_wait_block_bitmap (sb=sb@entry=0xffff880079a10000,
     block_group=block_group@entry=0,
     bh=bh@entry=0xffff88007bf2b2d8) at balloc.c:476
 #3  0xffffffff81232eaf in ext4_read_block_bitmap (sb=sb@entry=0xffff880079a10000,
     block_group=block_group@entry=0) at balloc.c:489
 #4  0xffffffff81232fc0 in ext4_count_free_clusters (sb=sb@entry=0xffff880079a10000) at balloc.c:665
 #5  0xffffffff81259ffa in ext4_check_descriptors (first_not_zeroed=<synthetic pointer>,
     sb=0xffff880079a10000) at super.c:2143
 #6  ext4_fill_super (sb=sb@entry=0xffff880079a10000, data=<optimized out>,
     data@entry=0x0 <irq_stack_union>, silent=silent@entry=0) at super.c:3851
     ...
Signed-off-by: Azat Khuzhin <a3at.mail@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

When we try to get 2^32-1 block of the file which has the extent
(ee_block=2^32-2, ee_len=1) with FIBMAP ioctl, it causes BUG_ON
in ext4_ext_put_gap_in_cache().

To avoid the problem, ext4_map_blocks() needs to check the file logical block
number. ext4_ext_put_gap_in_cache() called via ext4_map_blocks() cannot
handle 2^32-1 because the maximum file logical block number is 2^32-2.

Note that ext4_ind_map_blocks() returns -EIO when the block number is invalid.
So ext4_map_blocks() should also return the same errno.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

'0x7FDEADBEEF' will be truncated to 32-bit number under unicore32. Need
append 'ULL' for it.

The related warning (with allmodconfig under unicore32):

    CC [M]  fs/ext4/extents_status.o
  fs/ext4/extents_status.c: In function "__es_remove_extent":
  fs/ext4/extents_status.c:813: warning: integer constant is too large for "long" type
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Pull xfs update from Dave Chinner:
 "There are a couple of new fallocate features in this request - it was
  decided that it was easiest to push them through the XFS tree using
  topic branches and have the ext4 support be based on those branches.
  Hence you may see some overlap with the ext4 tree merge depending on
  how they including those topic branches into their tree.  Other than
  that, there is O_TMPFILE support, some cleanups and bug fixes.

  The main changes in the XFS tree for 3.15-rc1 are:

   - O_TMPFILE support
   - allowing AIO+DIO writes beyond EOF
   - FALLOC_FL_COLLAPSE_RANGE support for fallocate syscall and XFS
     implementation
   - FALLOC_FL_ZERO_RANGE support for fallocate syscall and XFS
     implementation
   - IO verifier cleanup and rework
   - stack usage reduction changes
   - vm_map_ram NOIO context fixes to remove lockdep warings
   - various bug fixes and cleanups"

* tag 'xfs-for-linus-3.15-rc1' of git://oss.sgi.com/xfs/xfs: (34 commits)
  xfs: fix directory hash ordering bug
  xfs: extra semi-colon breaks a condition
  xfs: Add support for FALLOC_FL_ZERO_RANGE
  fs: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
  xfs: inode log reservations are still too small
  xfs: xfs_check_page_type buffer checks need help
  xfs: avoid AGI/AGF deadlock scenario for inode chunk allocation
  xfs: use NOIO contexts for vm_map_ram
  xfs: don't leak EFSBADCRC to userspace
  xfs: fix directory inode iolock lockdep false positive
  xfs: allocate xfs_da_args to reduce stack footprint
  xfs: always do log forces via the workqueue
  xfs: modify verifiers to differentiate CRC from other errors
  xfs: print useful caller information in xfs_error_report
  xfs: add xfs_verifier_error()
  xfs: add helper for updating checksums on xfs_bufs
  xfs: add helper for verifying checksums on xfs_bufs
  xfs: Use defines for CRC offsets in all cases
  xfs: skip pointless CRC updates after verifier failures
  xfs: Add support FALLOC_FL_COLLAPSE_RANGE for fallocate
  ...

Pull ext4 updates from Ted Ts'o:
 "Major changes for 3.14 include support for the newly added ZERO_RANGE
  and COLLAPSE_RANGE fallocate operations, and scalability improvements
  in the jbd2 layer and in xattr handling when the extended attributes
  spill over into an external block.

  Other than that, the usual clean ups and minor bug fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits)
  ext4: fix premature freeing of partial clusters split across leaf blocks
  ext4: remove unneeded test of ret variable
  ext4: fix comment typo
  ext4: make ext4_block_zero_page_range static
  ext4: atomically set inode->i_flags in ext4_set_inode_flags()
  ext4: optimize Hurd tests when reading/writing inodes
  ext4: kill i_version support for Hurd-castrated file systems
  ext4: each filesystem creates and uses its own mb_cache
  fs/mbcache.c: doucple the locking of local from global data
  fs/mbcache.c: change block and index hash chain to hlist_bl_node
  ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
  ext4: refactor ext4_fallocate code
  ext4: Update inode i_size after the preallocation
  ext4: fix partial cluster handling for bigalloc file systems
  ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents
  ext4: only call sync_filesystm() when remounting read-only
  fs: push sync_filesystem() down to the file system's remount_fs()
  jbd2: improve error messages for inconsistent journal heads
  jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()
  jbd2: minimize region locked by j_list_lock in journal_get_create_access()
  ...

Pull pstore fixes from Tony Luck:
 "Series of small bug fixes for pstore"

* tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  pstore: Fix memory leak when decompress using big_oops_buf
  pstore: Fix buffer overflow while write offset equal to buffer size
  pstore: Correct the max_dump_cnt clearing of ramoops
  pstore: Fix NULL pointer fault if get NULL prz in ramoops_get_next_prz
  pstore: skip zero size persistent ram buffer in traverse
  pstore: clarify clearing of _read_cnt in ramoops_context

Pull ubifs updates from Artem Bityutskiy:
 "This pull request includes the 'ubiblock' driver which provides R/O
  block access to UBI volumes.  It is useful for those who want to use
  squashfs on top of raw flash devices.  UBI will provide bit-flip
  handling and wear-levelling in this case (e.g., if there are other UBI
  volumes with R/W UBIFS too).

  The driver is actually pretty small and it is part of the UBI kernel
  subsystem.  Delivered by Ezequiel Garcia, along with a piece of
  documentation on the MTD web site and the user-space tool for creating
  and removing block devices"

* tag 'upstream-3.15-rc1' of git://git.infradead.org/linux-ubifs:
  UBI: block: Remove __initdata from ubiblock_param_ops
  UBI: make UBI_IOCVOLCRBLK take a parameter for future usage
  UBI: rename block device ioctls
  UBI: block: Use ENOSYS as return value when CONFIG_UBIBLOCK=n
  UBI: block: Add CONFIG_BLOCK dependency
  UBI: block: Use 'u64' for the 64-bit dividend
  UBI: block: Mark init-only symbol as __initdata
  UBI: block: do not use term "attach"
  UBI: R/O block driver on top of UBI volumes

Pull fuse update from Miklos Szeredi:
 "This series adds cached writeback support to fuse, improving write
  throughput"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix "uninitialized variable" warning
  fuse: Turn writeback cache on
  fuse: Fix O_DIRECT operations vs cached writeback misorder
  fuse: fuse_flush() should wait on writeback
  fuse: Implement write_begin/write_end callbacks
  fuse: restructure fuse_readpage()
  fuse: Flush files on wb close
  fuse: Trust kernel i_mtime only
  fuse: Trust kernel i_size only
  fuse: Connection bit for enabling writeback
  fuse: Prepare to handle short reads
  fuse: Linking file to inode helper

Pull dlm updates from David Teigland:
 "This set includes a couple trivial cleanups and changes recovery log
  messages from DEBUG to INFO"

* tag 'dlm-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: use INFO for recovery messages
  fs: Include appropriate header file in dlm/ast.c
  dlm: silence a harmless use after free warning

Pull btrfs changes from Chris Mason:
 "This is a pretty long stream of bug fixes and performance fixes.

  Qu Wenruo has replaced the btrfs async threads with regular kernel
  workqueues.  We'll keep an eye out for performance differences, but
  it's nice to be using more generic code for this.

  We still have some corruption fixes and other patches coming in for
  the merge window, but this batch is tested and ready to go"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (108 commits)
  Btrfs: fix a crash of clone with inline extents's split
  btrfs: fix uninit variable warning
  Btrfs: take into account total references when doing backref lookup
  Btrfs: part 2, fix incremental send's decision to delay a dir move/rename
  Btrfs: fix incremental send's decision to delay a dir move/rename
  Btrfs: remove unnecessary inode generation lookup in send
  Btrfs: fix race when updating existing ref head
  btrfs: Add trace for btrfs_workqueue alloc/destroy
  Btrfs: less fs tree lock contention when using autodefrag
  Btrfs: return EPERM when deleting a default subvolume
  Btrfs: add missing kfree in btrfs_destroy_workqueue
  Btrfs: cache extent states in defrag code path
  Btrfs: fix deadlock with nested trans handles
  Btrfs: fix possible empty list access when flushing the delalloc inodes
  Btrfs: split the global ordered extents mutex
  Btrfs: don't flush all delalloc inodes when we doesn't get s_umount lock
  Btrfs: reclaim delalloc metadata more aggressively
  Btrfs: remove unnecessary lock in may_commit_transaction()
  Btrfs: remove the unnecessary flush when preparing the pages
  Btrfs: just do dirty page flush for the inode with compression before direct IO
  ...

Pull GFS2 updates from Steven Whitehouse:
 "One of the main highlights this time, is not the patches themselves
  but instead the widening contributor base.  It is good to see that
  interest is increasing in GFS2, and I'd like to thank all the
  contributors to this patch set.

  In addition to the usual set of bug fixes and clean ups, there are
  patches to improve inode creation performance when xattrs are required
  and some improvements to the transaction code which is intended to
  help improve scalability after further changes in due course.

  Journal extent mapping is also updated to make it more efficient and
  again, this is a foundation for future work in this area.

  The maximum number of ACLs has been increased to 300 (for a 4k block
  size) which means that even with a few additional xattrs from selinux,
  everything should fit within a single fs block.

  There is also a patch to bring GFS2's own copy of the writepages code
  up to the same level as the core VFS.  Eventually we may be able to
  merge some of this code, since it is fairly similar.

  The other major change this time, is bringing consistency to the
  printing of messages via fs_<level>, pr_<level> macros"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (29 commits)
  GFS2: Fix address space from page function
  GFS2: Fix uninitialized VFS inode in gfs2_create_inode
  GFS2: Fix return value in slot_get()
  GFS2: inline function gfs2_set_mode
  GFS2: Remove extraneous function gfs2_security_init
  GFS2: Increase the max number of ACLs
  GFS2: Re-add a call to log_flush_wait when flushing the journal
  GFS2: Ensure workqueue is scheduled after noexp request
  GFS2: check NULL return value in gfs2_ok_to_move
  GFS2: Convert gfs2_lm_withdraw to use fs_err
  GFS2: Use fs_<level> more often
  GFS2: Use pr_<level> more consistently
  GFS2: Move recovery variables to journal structure in memory
  GFS2: global conversion to pr_foo()
  GFS2: return -E2BIG if hit the maximum limits of ACLs
  GFS2: Clean up journal extent mapping
  GFS2: replace kmalloc - __vmalloc / memset 0
  GFS2: Remove extra "if" in gfs2_log_flush()
  fs: NULL dereference in posix_acl_to_xattr()
  GFS2: Move log buffer accounting to transaction
  ...

Pull file locking updates from Jeff Layton:
 "Highlights:

   - maintainership change for fs/locks.c.  Willy's not interested in
     maintaining it these days, and is OK with Bruce and I taking it.
   - fix for open vs setlease race that Al ID'ed
   - cleanup and consolidation of file locking code
   - eliminate unneeded BUG() call
   - merge of file-private lock implementation"

* 'locks-3.15' of git://git.samba.org/jlayton/linux:
  locks: make locks_mandatory_area check for file-private locks
  locks: fix locks_mandatory_locked to respect file-private locks
  locks: require that flock->l_pid be set to 0 for file-private locks
  locks: add new fcntl cmd values for handling file private locks
  locks: skip deadlock detection on FL_FILE_PVT locks
  locks: pass the cmd value to fcntl_getlk/getlk64
  locks: report l_pid as -1 for FL_FILE_PVT locks
  locks: make /proc/locks show IS_FILE_PVT locks as type "FLPVT"
  locks: rename locks_remove_flock to locks_remove_file
  locks: consolidate checks for compatible filp->f_mode values in setlk handlers
  locks: fix posix lock range overflow handling
  locks: eliminate BUG() call when there's an unexpected lock on file close
  locks: add __acquires and __releases annotations to locks_start and locks_stop
  locks: remove "inline" qualifier from fl_link manipulation functions
  locks: clean up comment typo
  locks: close potential race between setlease and open
  MAINTAINERS: update entry for fs/locks.c

Pull renameat2 system call from Miklos Szeredi:
 "This adds a new syscall, renameat2(), which is the same as renameat()
  but with a flags argument.

  The purpose of extending rename is to add cross-rename, a symmetric
  variant of rename, which exchanges the two files.  This allows
  interesting things, which were not possible before, for example
  atomically replacing a directory tree with a symlink, etc...  This
  also allows overlayfs and friends to operate on whiteouts atomically.

  Andy Lutomirski also suggested a "noreplace" flag, which disables the
  overwriting behavior of rename.

  These two flags, RENAME_EXCHANGE and RENAME_NOREPLACE are only
  implemented for ext4 as an example and for testing"

* 'cross-rename' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ext4: add cross rename support
  ext4: rename: split out helper functions
  ext4: rename: move EMLINK check up
  ext4: rename: create ext4_renament structure for local vars
  vfs: add cross-rename
  vfs: lock_two_nondirectories: allow directory args
  security: add flags to rename hooks
  vfs: add RENAME_NOREPLACE flag
  vfs: add renameat2 syscall
  vfs: rename: use common code for dir and non-dir
  vfs: rename: move d_move() up
  vfs: add d_is_dir()

Pull media updates from Mauro Carvalho Chehab:
 "The main set of series of patches for media subsystem, including:
   - document RC sysfs class
   - added an API to setup scancode to allow waking up systems using the
     Remote Controller
   - add API for SDR devices.  Drivers are still on staging
   - some API improvements for getting EDID data from media
     inputs/outputs
   - new DVB frontend driver for drx-j (ATSC)
   - one driver (it913x/it9137) got removed, in favor of an improvement
     on another driver (af9035)
   - added a skeleton V4L2 PCI driver at documentation
   - added a dual flash driver (lm3646)
   - added a new IR driver (img-ir)
   - added an IR scancode decoder for the Sharp protocol
   - some improvements at the usbtv driver, to allow its core to be
     reused.
   - added a new SDR driver (rtl2832u_sdr)
   - added a new tuner driver (msi001)
   - several improvements at em28xx driver to fix PM support, device
     removal and to split the V4L2 specific bits into a separate
     sub-driver
   - one driver got converted to videobuf2 (s2255drv)
   - the e4000 tuner driver now follows an improved binding model
   - some fixes at V4L2 compat32 code
   - several fixes and enhancements at videobuf2 code
   - some cleanups at V4L2 API documentation
   - usual driver enhancements, new board additions and misc fixups"

[ NOTE! This merge effective drops commit 4329b93b ("of: Reduce
  indentation in of_graph_get_next_endpoint").

  The of_graph_get_next_endpoint() function was moved and renamed by
  commit fd9fdb78 ("[media] of: move graph helpers from
  drivers/media/v4l2-core to drivers/of").  It was originally called
  v4l2_of_get_next_endpoint() and lived in the file
  drivers/media/v4l2-core/v4l2-of.c.

  In that original location, it was then fixed to support empty port
  nodes by commit b9db140c ("[media] v4l: of: Support empty port
  nodes"), and that commit clashes badly with the dropped "Reduce
  intendation" commit.  I had to choose one or the other, and decided
  that the "Support empty port nodes" commit was more important ]

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (426 commits)
  [media] em28xx-dvb: fix PCTV 461e tuner I2C binding
  Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding"
  [media] em28xx: fix PCTV 290e LNA oops
  [media] em28xx-dvb: fix PCTV 461e tuner I2C binding
  [media] m88ds3103: fix bug on .set_tone()
  [media] saa7134: fix WARN_ON during resume
  [media] v4l2-dv-timings: add module name, description, license
  [media] videodev2.h: add parenthesis around macro arguments
  [media] saa6752hs: depends on CRC32
  [media] si4713: fix Kconfig dependencies
  [media] Sensoray 2255 uses videobuf2
  [media] adv7180: free an interrupt on failure paths in init_device()
  [media] e4000: make VIDEO_V4L2 dependency optional
  [media] af9033: Don't export functions for the hardware filter
  [media] af9035: use af9033 PID filters
  [media] af9033: implement PID filter
  [media] rtl2832_sdr: do not use dynamic stack allocation
  [media] e4000: fix 32-bit build error
  [media] em28xx-audio: make sure audio is unmuted on open()
  [media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format
  ...

Pull sb_edac patches from Mauro Carvalho Chehab:
 "A couple sb_edac driver improvements, cleaning a little bit the amount
  of data sent to dmesg, and fixing one error message"

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  sb_edac: mark MCE messages as KERN_DEBUG
  sb_edac: use "event" instead of "exception" when MC wasnt signaled