- 17 Nov, 2017 40 commits
-
-
Vasily Averin authored
Publishing of net pointer is not safe, use net->ns.inum as net ID [ 171.391947] RPC: created new rpcb local clients (rpcb_local_clnt: ..., rpcb_local_clnt4: ...) for net f00001e7 [ 171.767188] NFSD: starting 90-second grace period (net f00001e7) Signed-off-by:Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Vasily Averin authored
Publishing of net pointer is not safe, use net->ns.inum instead Signed-off-by:
-
Vasily Averin authored
Be sure that all_clients list initialized in net_init hook was return to initial state. Signed-off-by:
-
Vasily Averin authored
Be sure that nfs_client_list and nfs_volume_list lists initialized in net_init hook were return to initial state in net_exit hook. Signed-off-by:
-
Markus Elfring authored
Add a jump target so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Trond Myklebust authored
When decoding a CLOSE, replace the stateid returned by the server with the "invalid special stateid" described in RFC5661, Section 8.2.3. In nfs_set_open_stateid_locked, ignore stateids from closed state. Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
In nfs_set_open_stateid_locked, we must ignore stateids from closed state. Reported-by:
Andrew W Elble <aweits@rit.edu> Signed-off-by:
-
Trond Myklebust authored
Signed-off-by:
-
Trond Myklebust authored
Signed-off-by:
-
Trond Myklebust authored
Signed-off-by:
-
Trond Myklebust authored
If our layoutreturn returns an NFS4ERR_OLD_STATEID, then try to update the stateid and retry. Signed-off-by:
-
Trond Myklebust authored
If our layoutreturn on close operation returns an NFS4ERR_OLD_STATEID, then try to update the stateid and retry. We know that there should be no further LAYOUTGET requests being launched. Signed-off-by:
-
Trond Myklebust authored
If the stateid is no longer recognised on the server, either due to a restart, or due to a competing CLOSE call, then we do not have to retry. Any open contexts that triggered a reopen of the file, will also act as triggers for any CLOSE for the updated stateids. Signed-off-by:
-
Trond Myklebust authored
If we're racing with an OPEN, then retry the operation instead of declaring it a success. Signed-off-by:
-
Trond Myklebust authored
On successful rename, the "old_dentry" is retained and is attached to the "new_dir", so we need to call nfs_set_verifier() accordingly. Signed-off-by:
-
Trond Myklebust authored
If the server that does not implement NFSv4.1 persistent session semantics reboots while we are performing an exclusive create, then the return value of NFS4ERR_DELAY when we replay the open during the grace period causes us to lose the verifier. When the grace period expires, and we present a new verifier, the server will then correctly reply NFS4ERR_EXIST. This commit ensures that we always present the same verifier when replaying the OPEN. Reported-by:
Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by:
-
Trond Myklebust authored
Signed-off-by:
-
Trond Myklebust authored
Ben Coddington has noted the following race between OPEN and CLOSE on a single client. Process 1 Process 2 Server ========= ========= ====== 1) OPEN file 2) OPEN file 3) Process OPEN (1) seqid=1 4) Process OPEN (2) seqid=2 5) Reply OPEN (2) 6) Receive reply (2) 7) new stateid, seqid=2 8) CLOSE file, using stateid w/ seqid=2 9) Reply OPEN (1) 10( Process CLOSE (8) 11) Reply CLOSE (8) 12) Forget stateid file closed 13) Receive reply (7) 14) Forget stateid file closed. 15) Receive reply (1). 16) New stateid seqid=1 is really the same stateid that was closed. IOW: the reply to the first OPEN is delayed. Since "Process 2" does not wait before closing the file, and it does not cache the closed stateid, then when the delayed reply is finally received, it is treated as setting up a new stateid by the client. The fix is to ensure that the client processes the OPEN and CLOSE calls in the same order in which the server processed them. This commit ensures that we examine the seqid of the stateid returned by OPEN. If it is a new stateid, we assume the seqid must be equal to the value 1, and that each state transition increments the seqid value by 1 (See RFC7530, Section 9.1.4.2, and RFC5661, Section 8.2.2). If the tracker sees that an OPEN returns with a seqid that is greater than the cached seqid + 1, then it bumps a flag to ensure that the caller waits for the RPCs carrying the missing seqids to complete. Note that there can still be pathologies where the server crashes before it can even send us the missing seqids. Since the OPEN call is still holding a slot when it waits here, that could cause the recovery to stall forever. To avoid that, we time out after a 5 second wait. Reported-by:Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
-
Chuck Lever authored
Display information about the RPC procedure being requested in the trace log. This sometimes critical information cannot always be derived from other RPC trace entries. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Chuck Lever authored
The rpc_task_begin trace point always display a task ID of zero. Move the trace point call site so that it picks up the new task ID. Signed-off-by:
-
Chuck Lever authored
mount.nf-11159 8.... 905.248380: xprt_transmit: [FAILED TO PARSE] xid=351291440 status=0 addr=192.168.2.5 port=20049 mount.nf-11159 8.... 905.248381: rpc_task_sleep: task:6210@1 flags=0e80 state=0005 status=0 timeout=60000 queue=xprt_pending kworker/-1591 1.... 905.248419: xprt_lookup_rqst: [FAILED TO PARSE] xid=351291440 status=0 addr=192.168.2.5 port=20049 kworker/-1591 1.... 905.248423: xprt_complete_rqst: [FAILED TO PARSE] xid=351291440 status=24 addr=192.168.2.5 port=20049 Byte swapping is not available during trace-cmd report. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Thomas Meyer authored
Bool initializations should use true and false. Bool tests don't need comparisons. Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
-
Anna Schumaker authored
There isn't an obvious way to acquire and release the RCU lock during a tracepoint, so we can't use the rpc_peeraddr2str() function here. Instead, rely on the client's cl_hostname, which should have similar enough information without needing an rcu_dereference(). Reported-by:
Dave Jones <davej@codemonkey.org.uk> Cc: stable@vger.kernel.org # v3.12 Signed-off-by:
-
Chuck Lever authored
Credit work contributed by Oracle engineers since 2014. Signed-off-by:
-
Chuck Lever authored
Clean up. This include should have been removed by commit 23826c7a ("xprtrdma: Serialize credit accounting again"). Signed-off-by:
Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by:
-
Chuck Lever authored
Clean up: C-structure style XDR encoding and decoding logic has been replaced over the past several merge windows on both the client and server. These data structures are no longer used. Signed-off-by:
-
Chuck Lever authored
Lift the Send and LocalInv completion handlers out of soft IRQ mode to make room for other work. Also, move the Send CQ to a different CPU than the CPU where the Receive CQ is running, for improved scalability. Signed-off-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nfs_client.cl_count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
David Windsor <dwindsor@gmail.com> Reviewed-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nfs_lock_context.count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nfs4_lock_state.ls_count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nfs_cache_defer_req.count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nfs4_ff_layout_mirror.ref is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable pnfs_layout_hdr.plh_refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable nfs4_pnfs_ds.ds_count is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Trond Myklebust authored
If the previous request on a slot was interrupted before it was processed by the server, then our slot sequence number may be out of whack, and so we try the next operation using the old sequence number. The problem with this, is that not all servers check to see that the client is replaying the same operations as previously when they decide to go to the replay cache, and so instead of the expected error of NFS4ERR_SEQ_FALSE_RETRY, we get a replay of the old reply, which could (if the operations match up) be mistaken by the client for a new reply. To fix this, we attempt to send a COMPOUND containing only the SEQUENCE op in order to resync our slot sequence number. Cc: Olga Kornievskaia <olga.kornievskaia@gmail.com> [olga.kornievskaia@gmail.com: fix an Oops] Signed-off-by:
-
Chuck Lever authored
The sendctx circular queue now guarantees that xprtrdma cannot overflow the Send Queue, so remove the remaining bits of the original Send WQE counting mechanism. Signed-off-by:
-
Chuck Lever authored
When an RPC Call includes a file data payload, that payload can come from pages in the page cache, or a user buffer (for direct I/O). If the payload can fit inline, xprtrdma includes it in the Send using a scatter-gather technique. xprtrdma mustn't allow the RPC consumer to re-use the memory where that payload resides before the Send completes. Otherwise, the new contents of that memory would be exposed by an HCA retransmit of the Send operation. So, block RPC completion on Send completion, but only in the case where a separate file data payload is part of the Send. This prevents the reuse of that memory while it is still part of a Send operation without an undue cost to other cases. Waiting is avoided in the common case because typically the Send will have completed long before the RPC Reply arrives. These days, an RPC timeout will trigger a disconnect, which tears down the QP. The disconnect flushes all waiting Sends. This bounds the amount of time the reply handler has to wait for a Send completion. Signed-off-by:
-
Chuck Lever authored
Invoke a common routine for releasing hardware resources (for example, invalidating MRs). This needs to be done whether an RPC Reply has arrived or the RPC was terminated early. Signed-off-by:
-
