- 06 Nov, 2019 6 commits
-
-
Radhey Shyam Pandey authored
Add support for AXI Multichannel Direct Memory Access (AXI MCDMA) core, which is a soft Xilinx IP core that provides high-bandwidth direct memory access between memory and AXI4-Stream target peripherals. The AXI MCDMA core provides scatter-gather interface with multiple independent transmit and receive channels. The driver supports device_prep_slave_sg slave transfer mode. Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Link: https://lore.kernel.org/r/1571763622-29281-7-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by:
Vinod Koul <vkoul@kernel.org>
-
Radhey Shyam Pandey authored
Extend dma_config structure to store irq routine handle. It enables runtime handler selection based on xdma_ip_type and serves as preparatory patch for adding MCDMA IP support. Signed-off-by:
-
Radhey Shyam Pandey authored
The AXI DMA multichannel support is deprecated in the IP and it is no longer actively supported. For multichannel support, refer to the AXI multichannel direct memory access IP product guide(PG228) and MCDMA driver. So inline with it remove axidma multichannel support from from the driver. Signed-off-by:
-
Radhey Shyam Pandey authored
Add devicetree binding for Xilinx AXI Multichannel Direct Memory Access (AXI MCDMA) IP. The AXI MCDMA provides high-bandwidth direct memory access between memory and AXI4-Stream target peripherals. The AXI MCDMA core provides a scatter-gather interface with multiple channel support with independent configuration. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1571763622-29281-4-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by:
-
Radhey Shyam Pandey authored
Trivial formatting(keep compatible string one per line, caps change etc). It doesn't modify the content of the binding. Signed-off-by:
-
Radhey Shyam Pandey authored
The AXI DMA multichannel support is deprecated in the IP and it is no longer actively supported. For multichannel support, refer to the AXI multichannel direct memory access IP product guide(PG228) and MCDMA driver(added in the subsequent commits). Inline with it remove axidma multichannel optional properties i.e xlnx,mcdma and dma-channels from the binding description. Signed-off-by:
-
- 05 Nov, 2019 3 commits
-
-
Peter Ujfalusi authored
Like paRAM slots, channels could be used by other cores and in this case we need to make sure that the driver do not alter these channels. Handle the generic dma-channel-mask property to mark channels in a bitmap which can not be used by Linux and convert the legacy rsv_chans if it is provided by platform_data. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191025073056.25450-4-peter.ujfalusi@ti.comSigned-off-by:
-
Peter Ujfalusi authored
Similarly to paRAM slots, channels can be used by other cores. The common dma-channel-mask property can be used for specifying the available channels. Signed-off-by:
-
Peter Ujfalusi authored
Make the dma-channel-mask to be usable for controllers with more than 32 channels. Signed-off-by:
-
- 02 Nov, 2019 2 commits
-
-
Nathan Chancellor authored
Clang warns: drivers/dma/fsl-dpaa2-qdma/dpdmai.c:148:25: warning: variable 'cfg' is uninitialized when used within its own initialization [-Wuninitialized] DPDMAI_CMD_CREATE(cmd, cfg); ~~~~~~~~~~~~~~~~~~~~~~~^~~~ drivers/dma/fsl-dpaa2-qdma/dpdmai.c:42:24: note: expanded from macro 'DPDMAI_CMD_CREATE' typeof(_cfg) (cfg) = (_cfg); \ ~~~ ^~~~ 1 warning generated. Looking at the preprocessed source, we can see that this is true. int dpdmai_create(struct fsl_mc_io *mc_io, u32 cmd_flags, const struct dpdmai_cfg *cfg, u16 *token) { struct fsl_mc_command cmd = { 0 }; int err; cmd.header = mc_encode_cmd_header((((0x90E) << 4) | 0), cmd_flags, 0); do { typeof(cmd)(cmd) = (cmd); typeof(cfg)(cfg) = (cfg); ((cmd).params[0] |= mc_enc((8), (8), (cfg)->priorities[0])); ((cmd).params[0] |= mc_enc((16), (8), (cfg)->priorities[1])); } while (0); I cannot see a good reason to create another version of cfg when the parameter one will work perfectly fine and cmd can just be used as is. Remove them to fix this warning. Fixes: f2835adf ("dmaengine: fsl-dpaa2-qdma: Add the DPDMAI(Data Path DMA Interface) support") Link: https://github.com/ClangBuiltLinux/linux/issues/746Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20191022171648.37732-1-natechancellor@gmail.comSigned-off-by:
-
Krzysztof Kozlowski authored
platform_get_irq_byname() might return -errno which later would be cast to an unsigned int and used in IRQ handling code leading to usage of wrong ID and errors about wrong irq_base. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by:
Peng Ma <peng.ma@nxp.com> Tested-by:
-
- 23 Oct, 2019 1 commit
-
-
Peng Ma authored
The symbols were not exported leading to error: WARNING: modpost: missing MODULE_LICENSE() in drivers/dma/fsl-dpaa2-qdma/dpdmai.o see include/linux/module.h for more information GZIP arch/arm64/boot/Image.gz ERROR: "dpdmai_enable" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_set_rx_queue" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_get_tx_queue" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_get_rx_queue" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_get_attributes" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_open" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_close" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_disable" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! ERROR: "dpdmai_reset" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined! WARNING: "HYPERVISOR_platform_op" [vmlinux] is a static EXPORT_SYMBOL_GPL make[2]: *** [__modpost] Error 1 make[1]: *** [modules] Error 2 make[1]: *** Waiting for unfinished jobs.... make: *** [sub-make] Error 2 So export it. Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Link: https://lore.kernel.org/r/20191023045617.22764-1-peng.ma@nxp.comSigned-off-by:
-
- 20 Oct, 2019 7 commits
-
-
Nicholas Graumann authored
Whenever we reset the channel, we need to clear desc_pendingcount along with desc_submitcount. Otherwise when a new transaction is submitted, the irq coalesce level could be programmed to an incorrect value in the axidma case. This behavior can be observed when terminating pending transactions with xilinx_dma_terminate_all() and then submitting new transactions without releasing and requesting the channel. Signed-off-by:
Nicholas Graumann <nick.graumann@gmail.com> Signed-off-by:
-
Nicholas Graumann authored
The driver should not run out of tx segments in normal operation. But, if the user attempts to prepare a transaction with a large sg list, the driver may not have enough free segments to accommodate the request. Log a message at the debug level to inform the user in case they are experiencing issues. Signed-off-by:
-
Nicholas Graumann authored
Take advantage of dmaengine_desc_get_callback_invoke which allows either a callback or callback_result to be specified. This can be useful when using the AXI DMA transfer unknown quantities of data where the residue contained in the result can be used to calculate the number of bytes transferred. Signed-off-by:
-
Nicholas Graumann authored
Introduce a function that can calculate residues for IPs that support it: AXI DMA and CDMA. Signed-off-by:
-
Radhey Shyam Pandey authored
There is no use of storing channel data residue field. So clean it up. In tx_status simply pass calculated residue to dma_set_residue. Signed-off-by:
-
Nicholas Graumann authored
The dma api provides a single interface to get the appropriate callback and invoke it directly. Prefer using it. Signed-off-by:
-
Radhey Shyam Pandey authored
In descriptor cleanup the call to desc_callback_valid can be safely removed as both callback pointers i.e callback_result and callback are anyway checked in invoke(). There is no much benefit in having redundant checks. Signed-off-by:
Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> Link: https://lore.kernel.org/r/1571150904-3988-2-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by:
-
- 18 Oct, 2019 4 commits
-
-
Jassi Brar authored
Driver for Socionext Milbeaut XDMAC controller. The controller only supports Mem-To-Mem transfers over upto 8 configurable channels. Signed-off-by:
Jassi Brar <jaswinder.singh@linaro.org> Link: https://lore.kernel.org/r/20191015033219.14713-1-jassisinghbrar@gmail.comSigned-off-by:
-
Jassi Brar authored
Document the devicetree bindings for Socionext Milbeaut XDMAC controller. Controller only supports Mem->Mem transfers. Number of physical channels are determined by the number of irqs registered. Reviewed-by:
-
Jassi Brar authored
Driver for Socionext Milbeaut HDMAC controller. The controller has upto 8 floating channels, that need a predefined slave-id to work from a set of slaves. Signed-off-by:
-
Jassi Brar authored
Document the devicetree bindings for Socionext Milbeaut HDMAC controller. Controller has upto 8 floating channels, that need a predefined slave-id to work from a set of slaves. Reviewed-by:
-
- 17 Oct, 2019 2 commits
-
-
Peng Ma authored
DPPA2(Data Path Acceleration Architecture 2) qDMA supports virtualized channel by allowing DMA jobs to be enqueued into different work queues. Core can initiate a DMA transaction by preparing a frame descriptor(FD) for each DMA job and enqueuing this job through a hardware portal. DPAA2 components can also prepare a FD and enqueue a DMA job through a hardware portal. The qDMA prefetches DMA jobs through DPAA2 hardware portal. It then schedules and dispatches to internal DMA hardware engines, which generate read and write requests. Both qDMA source data and destination data can be either contiguous or non-contiguous using one or more scatter/gather tables. The qDMA supports global bandwidth flow control where all DMA transactions are stalled if the bandwidth threshold has been reached. Also supported are transaction based read throttling. Add NXP dppa2 qDMA to support some of Layerscape SoCs. such as: LS1088A, LS208xA, LX2, etc. Signed-off-by:
-
Peng Ma authored
The MC(Management Complex) exports the DPDMAI(Data Path DMA Interface) object as an interface to operate the DPAA2(Data Path Acceleration Architecture 2) qDMA Engine. The DPDMAI enables sending frame-based requests to qDMA and receiving back confirmation response on transaction completion, utilizing the DPAA2 QBMan(Queue Manager and Buffer Manager hardware) infrastructure. DPDMAI object provides up to two priorities for processing qDMA requests. The following list summarizes the DPDMAI main features and capabilities: 1. Supports up to two scheduling priorities for processing service requests. - Each DPDMAI transmit queue is mapped to one of two service priorities, allowing further prioritization in hardware between requests from different DPDMAI objects. 2. Supports up to two receive queues for incoming transaction completion confirmations. - Each DPDMAI receive queue is mapped to one of two receive priorities, allowing further prioritization between other interfaces when associating the DPDMAI receive queues to DPIO or DPCON(Data Path Concentrator) objects. 3. Supports different scheduling options for processing received packets: - Queues can be configured either in 'parked' mode (default), or attached to a DPIO object, or attached to DPCON object. 4. Allows interaction with one or more DPIO objects for dequeueing/enqueueing frame descriptors(FD) and for acquiring/releasing buffers. 5. Supports enable, disable, and reset operations. Add dpdmai to support some platforms with dpaa2 qdma engine. Signed-off-by:
-
- 15 Oct, 2019 4 commits
-
-
Biju Das authored
Renesas RZ/G2N (R8A774B1) SoC also has the R-Car gen2/3 compatible DMA controllers, therefore document RZ/G2N specific bindings. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
-
Baolin Wang authored
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together, which can simpify the code. Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Link: https://lore.kernel.org/r/1af3efdac3b217203cace090c8947386854c0144.1569554639.git.baolin.wang@linaro.orgSigned-off-by:
-
Radhey Shyam Pandey authored
In dma probe, the driver checks for devm_clk_get return and print error message in the failing case. However for -EPROBE_DEFER this message is confusing so avoid it. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/1569495060-18117-5-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by:
-
Radhey Shyam Pandey authored
Replace the chain of platform_get_resource() and devm_ioremap_resource() with devm_platform_ioremap_resource(). It simplifies the flow and there is no functional change. Fixes below cocinelle warning- WARNING: Use devm_platform_ioremap_resource for xdev -> regs Signed-off-by:
-
- 14 Oct, 2019 11 commits
-
-
Colin Ian King authored
Don't populate the array 'handler' on the stack but instead make it static const. Makes the object code smaller by 80 bytes. Before: text data bss dec hex filename 38225 9084 64 47373 b90d drivers/dma/iop-adma.o After: text data bss dec hex filename 38081 9148 64 47293 b8bd drivers/dma/iop-adma.o (gcc version 9.2.1, amd64) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190905163726.19690-1-colin.king@canonical.comSigned-off-by:
-
Andy Shevchenko authored
On some platforms the clock can be fixed rate, always running one and there is no need to do anything with it. In order to support those platforms, switch to use optional clock. Fixes: f8d9ddbc ("dmaengine: dw: platform: Enable iDMA 32-bit on Intel Elkhart Lake") Depends-on: 60b8f0dd ("clk: Add (devm_)clk_get_optional() functions") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20190924085116.83683-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Markus Elfring authored
Simplify this function implementation by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Acked-by:
Shawn Guo <shawnguo@kernel.org> Link: https://lore.kernel.org/r/85de79fa-1ca5-a1e5-0296-9e8a2066f134@web.deSigned-off-by:
-
Markus Elfring authored
Simplify this function implementation by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
Simplify this function implementation by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
Simplify this function implementation a bit by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
Simplify this function implementation by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
Simplify this function implementation a bit by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
Simplify this function implementation by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/377247f3-b53a-a9d9-66c7-4b8515de3809@web.deSigned-off-by:
-
Yoshihiro Shimoda authored
This patch adds dma-channel-mask property support not to reserve some DMA channels for some reasons. (for example: a heterogeneous CPU uses it.) Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
-
Yoshihiro Shimoda authored
This patch uses devm_platform_ioremap_resource() instead of using platform_get_resource() and devm_ioremap_resource() together to simplify. Signed-off-by:
-
