- 08 May, 2007 40 commits
-
-
Antonino A. Daplas authored
Fix the following sparse warning: drivers/video/nvidia/nv_setup.c:659:20: warning: dereference of noderef expression Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Antonino A. Daplas authored
If the current framebuffer console is rotated (rotate != 0), doing an "fbset -a" will corrupt the current console. Fix by updating the current console only after all non-visible consoles have been updated. Signed-off-by:
-
Antonino A. Daplas authored
Instead of directly linking vgastate.o by individual drivers, create a Kconfig option VGASTATE which can be 'SELECT'ed by individual drivers instead. Signed-off-by:
-
Antonino A. Daplas authored
Allow the saving and restoration of VGA text mode. The state is saved on the first open and restored on the last close. Because of the VGA registers are linearly mapped to the MMIO space, MMIO access is used which is not limited to X86 platforms nor to the primary display device. An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from graphics to text mode. Signed-off-by:
-
Antonino A. Daplas authored
Use already defined VGAwCR/VGArCR functions to access the i2c bus. Signed-off-by:
-
Antonino A. Daplas authored
Allow the saving and restoration of VGA text mode. The state is saved on the first open and restored on the last close. Because of the non-linear mapping of the VGA registers to the MMIO space, this will be done only on X86 platforms where the device is the primary display. An echo 0 > /sys/class/vtconsole/vtcon1/bind will convert the display from graphics to text mode. Signed-off-by:
-
Roland Stigge authored
Fix error handling code Signed-off-by:
Roland Stigge <stigge@antcom.de> Signed-off-by:
-
Richard Knutsson authored
Convert to generic boolean. Signed-off-by:
Richard Knutsson <ricknu-0@student.ltu.se> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Robert P. J. Day authored
Following the programming advice laid down in the gcc manual, make sure the case "..." operator has spaces on either side. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Krzysztof Helt authored
This is mainly correction of types, typos and missing characters in the skeletonfb.c file found while trying to prepare a new fb driver. [adaplas] Additions on power management and fixes as per akpm Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Antonino A. Daplas authored
Use Read/WriteCrtc() to access CRTC registers in nv_i2c.c. These are safer because it uses the correct CRTC base (0x3bx or 0x3dx). Signed-off-by:
-
Antonino A. Daplas authored
- Ensure that CRTC registers are accessible by unlocking them on set_par(), otherwise i2c reading will fail. - The function nvidia_vga_protect(), does not protect the VGA registers, but turns off the screen. Rename it to nvidia_screen_off(). Signed-off-by:
-
Antonino A. Daplas authored
Fixed reversed DDC port so assignments are congruent with nvidiafb's and X's nv driver. Signed-off-by:
Antonino Daplas <adaplas@pol.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jean Delvare authored
Various cleanups to rivafb/nvidiafb's I2C code: * Drop useless par->bus. * Refactor I2C bus deletion code. * Drop useless variable initialization. * Remove unneeded include of <linux/i2c-id.h>. * Simplify +1/-1. * Add __devinit tags where possible. [adaplas] The varible initialization are not useless. However, rivafb must check if i2c bus are created properly before reading the EDID block. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jean Delvare authored
I2C bus creation may fail, let rivafb handle that case properly. Signed-off-by:
-
Jean Delvare authored
Let the hardware monitoring drivers probe the second rivafb/nvidiafb I2C bus for devices. Signed-off-by:
Jean Delvare <khali@linux-fr> Signed-off-by:
-
Antonino A. Daplas authored
It was always intended for the logo to be drawn only if both fbcon and the driver that is mapped to it are both compiled statically. Currently, if fbcon is loaded prior to the driver, the logo is not shown. Reverse the order, and the code may attempt to draw the logo which is __initdata. By accident, this bug is rarely seen because this method of loading the modules is not common and secondly, a code in fb_prepare_logo() that checks the height of the logo (now a random value) rarely succeeds. Fix by drawing the logo only if both fbcon and the driver are statically compiled. Signed-off-by:
-
Randy Dunlap authored
drivers/video/s3fb.c:1078: warning: ignoring return value of 'pci_enable_device', declared with attribute warn_unused_result Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Antonino A. Daplas authored
Create a variable, default_utf8, that defines the system-wide default UTF-8 setting. This variable can be altered via sysfs. If the variable is properly set, this should mimimize breakage of UTF-8 encoded consoles when doing a reset or echo -e '\033c' and of newly opened/allocated consoles. This is based from patches by Jan Engelhardt and Paul LeoNerd Evans. Signed-off-by:
-
Michal Januszewski authored
When the cursor and echo are disabled on the current console, pressing a key will cause a black rectangle to be painted in the cursor's position. Fix this by not touching the framebuffer in fbcon_cursor() when the cursor is off. Signed-off-by:
Michal Januszewski <spock@gentoo.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
WANG Cong authored
drivers/usb/misc/sisusbvga/sisusb_con.c:1436: warning: initialization from incompatible pointer type Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Jan Engelhardt <jengelh@gmx.de> Signed-off-by:
-
Andrew Morton authored
Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Jan Engelhardt <jengelh@gmx.de> Signed-off-by:
-
Jan Engelhardt authored
Add color support to the "underline" and "italic" attributes as in OpenBSD/NetBSD-style (vt220) and xterm. Signed-off-by:
Jan Engelhardt <jengelh@gmx.de> Acked-by:
-
Jan Engelhardt authored
Allow for the palette to be exposed and changed via sysfs. A call to /usr/bin/reset will slurp the new definitions in for the current console. Already posted at http://lkml.org/lkml/2006/1/15/149Signed-off-by:
-
Petr Vandrovec authored
After I added some debugging printks I've found that code became a bit confused because it believed that primary monitor is 1920x540, but later it found in CRTC0's registers that panel size is 1920x1200 (Windows also agree that 1920x1200 is primary monitor, and 1920x1080i secondary one). When I applied attached patch then my monitor became as happy as it was before I connected HDMI cable to secondary output. Signed-off-by:
Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by:
-
johan henriksson authored
Added support for radeon xpress 200m(rs480). Note that the card doesn't like dynclk turned on. Signed-off-by:
Johan Henriksson <jhn98032@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Geert Uytterhoeven authored
Correct the image offsets when rotating the logo. Before image->dx and image->dy were always zero, so nobody ever noticed. Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-By:
James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Geert Uytterhoeven authored
fb_do_show_logo() updates: - Use width and height of the passed image instead of the global variable fb_logo - Explicitly pass the number of logos to draw Signed-off-by:Geoff Levand <geoffrey.levand@am.sony.com> Acked-By:
-
Geert Uytterhoeven authored
fbcon_prepare_logo(): Avoid vertical overflow when making space for the logo Signed-off-by:
-
Robert P. J. Day authored
Signed-off-by:
-
James Simmons authored
Add accelerated panning and accelerated color and mono image drawing. Please apply. Signed-off-by:
-
Maciej W. Rozycki authored
This is support for the TC variations of the TGA boards (properly known as SFB+ or Smart Frame Buffer Plus boards). The 8-plane SFB+ board uses the Bt459 RAMDAC (unlike its PCI TGA counterpart, which uses the Bt485), so bits have been added to support this chip as well. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: James Simmons <jsimmons@infradead.org> Acked-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Adrian Bunk authored
This patch makes the following needlessly global functions static: - hcb_wait_for_ack() - hcb_wait_for_ack_clear() - apollo_send_data() - apollo_send_command() Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
Jaya Kumar authored
This patch implements support for the E-Ink/hecuba display device. It uses deferred IO support. [akpm@linux-foundation.org: linker section fixes] Signed-off-by:
Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by:
-
Paul Mundt authored
There are cases when we do not want to wait on the delay for automatically updating the "real" framebuffer, this implements a simple ->fsync() hook for explicitly flushing the deferred I/O work. The ->page_mkwrite() handler will rearm the work queue normally. (akpm: nuke unneeded ifdefs, forward-delcare struct dentry) Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by:
-
Adrian Bunk authored
Signed-off-by:
-
Jaya Kumar authored
This implements deferred IO support in fbdev. Deferred IO is a way to delay and repurpose IO. This implementation is done using mm's page_mkwrite and page_mkclean hooks in order to detect, delay and then rewrite IO. This functionality is used by hecubafb. [adaplas] This is useful for graphics hardware with no directly addressable/mappable framebuffer. Implementing this will allow the "framebuffer" to be accesible from user space via mmap(). Signed-off-by:
-
Antonino A. Daplas authored
Coverity Bug 68, kill dead code. Signed-off-by:
-
Antonino A. Daplas authored
Fill transp->msb_right with the correct value. fbcon ignores this, but user apps may not. Signed-off-by:
-
Antonino A. Daplas authored
show_pan will display the value of the xoffset twice, instead of the xoffset and yoffset. Fix. Signed-off-by:
-
