This prepares us to start adding the android drivers
to the build.

The dummy android.c file will go away in the next few patches, as it
will not be needed once drivers/staging/android/ has a driver in it.

Cc: Robert Love <rlove@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

netdev->priv is now gone, use netdev_priv() instead.
This fixes the build error in the network driver within the epl stack.

Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Because of this, we can't set the mode for the timer, so delete this
code as it causes a build error right now.

Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It's a start, still a mess...

Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It's a start, still a mess...

Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It's a start, still a mess...

Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It's a start, still a mess...

Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is the openPOWERLINK network stack from systec electronic.

It's a bit messed up as there is a driver mixed into the
middle of it, lots of work needs to be done to unwind the
different portions to make it sane.

Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Basically remove unused code and variables still hanging around.

Cc: David Taht <d@teklibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The alphatrack_sysfs.c is unused, so remove it.

Cc: David Taht <d@teklibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Adds the tranzport and alphatrack drivers to the staging tree.

Cc: David Taht <d@teklibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Now that netdev->priv is removed, fix the driver to use netdev->ml_priv
like it always should have been doing.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

We are now using credentials, so just blindly setting the fsuid and
fsguid isn't acceptable.  All this means is that the config file needs
to be readable by the driver thread, not a big deal.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is the Ralink RT2870 driver from the company that does horrible
things like reading a config file from /etc.  However, the driver that
is currently under development from the wireless development community
is not working at all yet, so distros and users are using this version
instead (quite common hardware on a lot of netbook machines).

So here is this driver, for now, until the wireless developers get a
"clean" version into the main tree, or until this version is cleaned up
sufficiently to move out of the staging tree.

Ported to the Linux build system and cleaned up a bit already by me.

Cc: Linux wireless <linux-wireless@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch adds the Mimio Xi interactive whiteboard driver to the tree.

It was originally written by mwilder@cs.nmsu.edu, but cleaned up and
forward ported by me to the latest kernel version.


Cc: Phil Hannent <phil@hannent.co.uk>
Cc: <mwilder@cs.nmsu.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Adds the driver for the Princeton Instruments USB camera.

Needs a lot of work...

TODO:
	- make checkpatch.pl clean
	- coding style fixups (typedefs, etc.)
	- get it to build properly
	- audit ioctls
	- remove ioctls if possible
	- assign proper minor number
	- remove dbg() macro
	- lots of general cleanups
	- review locking

Cc: Judd Montgomery <judd@jpilot.org>
Cc: Jeff Frontz <jeff.frontz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

We only want to load for one PCI device, the "SE" device.  The other PCI
devices that this driver supports are already supported by the existing
rtl8187 module.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

If we are calling this the rtl8187se module, let's actually build
a module with that name.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

There were a number of files in the ieee80211 code that were not
needed, so they are removed.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is a driver for the Realtek 8187 "SE" wireless PCI devices in some
netbook computers (MSI Wind, and others).  It includes its own copy of
the ieee80211 stack, but it is compiled into the driver to prevend
duplicate symbol issues.

This version comes from Ralink with no authorship, but it is based
on an old version of the rtl8180 driver from Andrea Merello.  It was
hacked up a bit to get it to build properly within the kernel tree and
to properly handle the merged wireless stack within the driver.

Cc: Andrea Merello <andreamrl@tiscali.it>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Altera PCI Express Chaining DMA driver

A reference driver that exercises the Chaining DMA logic reference
design generated along the Altera FPGA PCI Express soft or hard core,
only if instantiated using the MegaWizard, not the SOPC builder, of
Quartus 8.1.

This driver can be used to test the logic instantiation and PCI
Express layers and acts as a starting point for driving custom logic
connected to the PCI Express End Point Chaining DMA engines.
Signed-off-by: Leon Woestenberg <leon@sidebranch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Smartcard support was more like a proof-of-concept than a completed
work. It was only able to read serial numbers from a few smartcards,
and the goal was to be able to secure keypad access with a smartcard.
Given how the concept was limited, this was never used beyond demos,
and it's better to remove this code so that nobody tries to use it
for security purposes.

The function panel_bind_callback() was ifdef'ed out, as its only user
was smartcard. However, it would be a waste to remove it because many
variations made on this driver will need it.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Cc: Frank Menne <frank.menne@hsm.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The code began 8 years ago with kernel 2.0 or 2.1, and kernels 2.2 and
2.4 were still supported. These old version need no longer be supported
if the code gets merged in mainline.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Cc: Frank Menne <frank.menne@hsm.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

All of the 401 errors, and 108 of the 235 warnings reported by checkpatch
were cleared. The only remanining warnings left concern lines larger than
80 characters. This cleanup will be performed last.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Cc: Frank Menne <frank.menne@hsm.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This adds the lcd-panel parallel port driver to the staging tree.

See the file, drivers/staging/panel/TODO for what needs to be fixed up
in order for this to be properly merged into the rest of the kernel
tree.

Cc: Willy Tarreau <w@1wt.eu>
Cc: Frank Menne <frank.menne@hsm.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

next-20081120 kernel randconfig on x86_64 box fails, while !CONFIG_MODULES

drivers/staging/meilhaus/memain.c: In function 'me_probe_pci':
drivers/staging/meilhaus/memain.c:425: error: implicit declaration of function '__symbol_get'
drivers/staging/meilhaus/memain.c:425: warning: cast to pointer from integer of different size
drivers/staging/meilhaus/memain.c:433: warning: cast to pointer from integer of different size
drivers/staging/meilhaus/memain.c:453: error: implicit declaration of function '__symbol_put'
make[3]: *** [drivers/staging/meilhaus/memain.o] Error 1

the driver uses __symbol_get and __symbol_put instead of marco's
symbol_get and symbol_put, I have only build tested the patch.
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Originally written by Guenter Gebhardt <g.gebhardt@meilhaus.de>
and Krzysztof Gantzke <k.gantzke@meilhaus.de>

This is the drv/lnx/mod directory of ME-IDS 1.2.9 tarball with
some files from drv/lnx/include.
Signed-off-by: David Kiliani <mail@davidkiliani.de>
Cc: Guenter Gebhardt <g.gebhardt@meilhaus.de>
Cc: Krzysztof Gantzke <k.gantzke@meilhaus.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

asus_oled depends on the CONFIG_USB_SUPPORT, I have only build tested
the patch.
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Driver for the OLED tiny display on some Asus laptops.

From: Jakub Schmidtke <sjakub@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Don't include procfs functions if CONFIG_PROC_FS is not set

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

No more need for a kernel version check now that we are in the main
kernel tree.

Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This fixes the sparse issues that the tool had with the me_daq
driver.

Cc: Michael Hillmann <hillmann@syscongroup.de>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This removes the typedefs from the me_daq driver.

Cc: Michael Hillmann <hillmann@syscongroup.de>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This fixes a number of checkpatch.pl issues in the me_daq
driver.

Cc: Michael Hillmann <hillmann@syscongroup.de>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This adds the me_daq comedi driver to the build.

From: Michael Hillmann <hillmann@syscongroup.de>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This adds the rtd520 comedi driver to the build.

From: Dan Christian <dac@ptolemy.arc.nasa.gov>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This adds the s626 comedi driver to the build.

From: Gianluca Palli <gpalli@deis.unibo.it>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

comedi_pci_disable_no_regions is not called by any comedi code
(in or out of the kernel tree), so remove it, so no one tries to
use it in the future.

Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>