This patch adds a new, "binary" API in addition to the old, text API usbmon
had before. The new API allows for less CPU use, and it allows to capture
all data from a packet where old API only captured 32 bytes at most. There
are some limitations and conditions to this, e.g. in case someone constructs
a URB with 1GB of data, it's not likely to be captured, because even the
huge buffers of the new reader are finite. Nonetheless, I expect this new
capability to capture all data for all real life scenarios.

The downside is, a special user mode application is required where cat(1)
worked before. I have sample code at http://people.redhat.com/zaitcev/linux/
and Paolo Abeni is working on patching libpcap.

This patch was initially written by Paolo and later I tweaked it, and
we had a little back-and-forth. So this is a jointly authored patch, but
I am submitting this I am responsible for the bugs.
Signed-off-by: Paolo Abeni <paolo.abeni@email.it>
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Added a function to check if an endpoint is a control endpoint.
There were similar functions for bulk, interrupt, and isoc,
but not for control endpoints.
Signed-off-by: Sarah Bailey <saharabeara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Went looking through some usb stuff and found some unnecessary casts in
file_storage.c  This is part of the KernelJanitors TODO list.
Signed-off-by: John Daiker <daikerjohn@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

While adding the dynamic-id support to usb serial I found a small bug in
the air cable driver:

Adds module and name information to the usb_serial_driver instance
of aircable. So the aircable driver is correctly shown under
/sys/bus/usb-serial/drivers/aircable and has the module link.
Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Every usb serial driver should have a pointer to the corresponding usb driver.
So the usb serial core can add a new id not only to the usb serial driver, but
also to the usb driver.

Also the usb drivers of ark3116, mos7720 and mos7840 missed the flag
no_dynamic_id=1. This is added now.
Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Thanks to Johannes Hölzl <johannes.hoelzl@gmx.de> for fixing a few
things and getting it all working properly.

This adds support for dynamic usb ids to the usb serial core.  The file
"new_id" will show up under the usb serial driver, not the usb driver
associated with the usb-serial driver (yeah, it can be a bit confusing
at first glance...)

This patch also modifies the USB core to allow the usb-serial core to
reuse much of the dynamic id logic.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Johannes Hölzl <johannes.hoelzl@gmx.de>

PPC embedded systems can have a ohci controller builtin. In the
new model, it will end up as a driver on the of_platform bus,
this patches takes care of them.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The previous model had the module_init & module_exit function in the
bus glue .c files themselves. That's a problem if several glues need
to be selected at once and the driver is built has module. This case
is quite common in embedded system where you want to handle both the
integrated ohci controller and some extra controller on PCI.

The ohci-hcd.c file now provide the module_init & module_exit and
appropriate driver registering/unregistering is done conditionally,
using #ifdefs.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Windows Mobile 5 based devices described as supporting "ActiveSync":

 - Speak RNDIS but lack the CDC and union descriptors.  This patch
   updates the cdc ethernet code to fake ACM descriptors we need.

 - Require RNDIS_MSG_QUERY messages to include a buffer of the size the
   response should generate.  This patch updates the rndis host code to
   pass this will-be-ignored data.

The resulting RNDIS host code has been reported to work with several
WM5 based devices.

(Note that a fancier patch is available at synce.sf.net.)


Some bugfixes, affecting not just ActiveSync:
    (a)	when cleaning up after RNDS init fails, scrub the second interface
	just like cdc_ether does, so disconnect won't oops.
    (b)	handle peripherals that use the pad-to-end-of-packet option; some
	devices can't talk to us if that option doesn't work.
    (c)	when choosing configurations, don't forget about an RNDIS config
	just because the RNDIS driver is dynamically linked.

Cleanup, streamlining, bugfixes, Kconfig, and matching hub driver update.
Also for paranoia's sake, refuse to talk to something that looks like a
real modem instead of RNDIS.
Signed-off-by: Ole Andre Vadla Ravnaas <oleavr@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It turns out that minor tweaks to the "CDC Subset" support in the Ethernet
gadget driver, just updating a config descriptor, let it be automagically
recognized by a Windows driver supported by MCCI.

This patch adds those descriptors, so systems using PXA 255 processors
(like Gumstix etc) can interop with those commercial MS-Windows drivers.
This is a Good Thing since Microsoft's RNDIS code has bugginess issues,
which are unfortunately compounded by "won't fix" issues as well as "the
published specs are incomplete and wrong" issues.  Being able to talk to
the MCCI driver gives Windows users another connectivity option.  (MCCI
also has CDC Ethernet drivers, which can help most non-PXA processors.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as830) removes some unnecessary error checking.  According
to the kerneldoc, schedule_work() can't fail.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Update /proc/bus/usb/devices output to report active altsettings.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It should hopefully fix the list corruption bug on:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=214402

Add a missing INIT_LIST_HEAD()
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

this makes the rio500 misc usb driver use mutexes and turns uninterruptible
sleep into interruptible sleep where the semantics are not affected.
Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The patch removes unneeded void * casts for the following (void *) pointers:
- struct file: private_data

The patch also contains some whitespace and coding style cleanups in the
relevant areas.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add USB_CLASS_MISC to <linux/usb/ch9.h>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This moves <linux/usb_ch9.h> to <linux/usb/ch9.h> to reduce some of the
clutter of usb header files.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch fixes a warning introduced by the big endian MMIO EHCI
support patch on platforms that don't have readl_be/writel_be variants
(though mostly harmless as those are called in an if (0) statement,
but gcc still warns).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This patch fixes a warning introduces by the split endian OHCI support
patch on platforms that don't have readl_be/writel_be variants (though
mostly harmless as those are called in an if (0) statement, but gcc
still warns).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch implements supports for EHCI controllers whose MMIO
registers are big endian and enables that functionality for
the Toshiba SCC chip. It does _not_ add support for big endian
in-memory data structures as this is not needed for that chip
and I hope it will never be.

The guts of the patch are to convert readl(...) to
ehci_readl(ehci, ...) and similarly for register writes.
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch separates support for big endian MMIO register access
and big endian descriptors in order to support the Toshiba SCC
implementation which has big endian registers but little endian
in-memory descriptors.

It simplifies the access functions a bit in ohci.h while at it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch applies David Brownell's suggestion for reworking the
OHCI quirk mechanism via a table of PCI IDs. It adapts the existing
quirks to use that mechanism.

This also moves the quirks to reset() as suggested by the comment
in there. This is necessary as we need to have the endian properly
set before we try to init the controller.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This moves the usb class devices that control the usbfs nodes to show up
in the proper place in the larger device tree.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch adds EPiC support to the io_edgeport driver which adds
support for a number of NCR printers:
	- NCR (Axiohm) 7401-K580 printer
	- NCR (TEC) 7401-K590 printer, 7402-K592
	- NCR (TEC) 7167, 7168 printers
	- NCR (TEC) 7197, 7198, F306, F307, F309 printers
	- NCR (Axiohm) 7194 printer
	- NCR (Axiohm) 7158 printer
and a few more.

It is based on the 2.6.19 kernel.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch increases the range for 0x054c:0x002c devices to make
the following Sony USB floppy to work:

T:  Bus=02 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=054c ProdID=002c Rev=20.00
S:  Manufacturer=SONY
S:  Product=USB Floppy
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=04 Prot=00 Driver=usb-storage
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   2 Ivl=127ms
Signed-off-by: Marcelo Ricardo Leitner <mrl@mandriva.com>
Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  JFS: Remove incorrect kgdb define
  JFS: call io_schedule() instead of schedule() to avoid deadlock
  JFS: Add lockdep annotations
  JFS: Avoid BUG() on a damaged file system

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (57 commits)
  [GFS2] make gfs2_writepages() static
  [GFS2] Unlock page on prepare_write try lock failure
  [GFS2] nfsd readdirplus assertion failure
  [DLM] fix softlockup in dlm_recv
  [DLM] zero new user lvbs
  [DLM/GFS2] indent help text
  [GFS2] Fix unlink deadlocks
  [GFS2] Put back semaphore to avoid umount problem
  [GFS2] more CURRENT_TIME_SEC
  [GFS2/DLM] fix GFS2 circular dependency
  [GFS2/DLM] use sysfs
  [GFS2] make lock_dlm drop_count tunable in sysfs
  [GFS2] increase default lock limit
  [GFS2] Fix list corruption in lops.c
  [GFS2] Fix recursive locking attempt with NFS
  [DLM] can miss clearing resend flag
  [DLM] saved dlm message can be dropped
  [DLM] Make sock_sem into a mutex
  [GFS2] Fix typo in glock.c
  [GFS2] use CURRENT_TIME_SEC instead of get_seconds in gfs2
  ...

On Mon, Jan 29, 2007 at 08:45:28PM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.20-rc6-mm2:
>...
>  git-gfs2-nmw.patch
>...
>  git trees
>...

This patch makes the needlessly global gfs2_writepages() static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

When the try lock of the glock failed in prepare_write we were
incorrectly exiting this function with the page still locked.
This was resulting in further I/O to this page hanging.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits)
  [IA64] swiotlb abstraction (e.g. for Xen)
  [IA64] swiotlb cleanup
  [IA64] make swiotlb use bus_to_virt/virt_to_bus
  [IA64] swiotlb bug fixes
  [IA64] Hook up getcpu system call for IA64
  [IA64] clean up sparsemem memory_present call
  [IA64] show_mem() for IA64 sparsemem NUMA
  [IA64] missing exports hwsw_sync_...
  [IA64] virt_to_page() can be called with NULL arg
  [IA64] alignment bug in ldscript
  [IA64] register memory ranges in a consistent manner
  [IA64] Enable SWIOTLB only when needed
  [IA64-SGI] Check for TIO errors on shub2 Altix
  [IA64] remove bogus prototype ia64_esi_init()
  [IA64] Clear IRQ affinity when unregistered
  [IA64] fix ACPI Kconfig issues
  [IA64] Fix NULL-pointer dereference in ia64_machine_kexec()
  [IA64] find thread for user rbs address
  [IA64] use snprintf() on features field of /proc/cpuinfo
  [IA64] enable singlestep on system call
  ...

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: ocfs2_link() journal credits update

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:
  USB HID: handle multi-interface devices for Apple macbook pro properly
  HID: move away from DEBUG defines in favor of CONFIG_HID_DEBUG
  USB HID: fix bogus comment in hid_get_class_descriptor()
  USB HID: remove hid_find_field_by_usage()
  HID: API - fix leftovers of hidinput API in USB HID
  HID: hid debug from hid-debug.h to hid layer
  hid: force feedback driver for PantherLord USB/PS2 2in1 Adapter
  hid: quirk for multi-input devices with unneeded output reports
  hid: allow force feedback for multi-input devices

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Remove obsolete prototypes
  IB/ehca: Remove use of do_mmap()
  RDMA/addr: Handle ethernet neighbour updates during route resolution
  IB: Make sure struct ib_user_mad.data is aligned
  IB/srp: Don't wait for response when QP is in error state.
  IB: Return qp pointer as part of ib_wc
  IB: Include <linux/kref.h> explicitly in <rdma/ib_verbs.h>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (32 commits)
  mmc: tifm: replace kmap with page_address
  mmc: sdhci: fix voltage ocr
  mmc: sdhci: replace kmap with page_address
  mmc: wbsd: replace kmap with page_address
  mmc: handle pci_enable_device() return value in sdhci
  mmc: Proper unclaim in mmc_block
  mmc: change wbsd mailing list
  mmc: Graceful fallback for fancy features
  mmc: Handle wbsd's stupid command list
  mmc: Allow host drivers to specify max block count
  mmc: Allow host drivers to specify a max block size
  tifm_sd: add suspend and resume functionality
  tifm_core: add suspend/resume infrastructure for tifm devices
  tifm_7xx1: prettify
  tifm_7xx1: recognize device 0xac8f as supported
  tifm_7xx1: switch from workqueue to kthread
  tifm_7xx1: Merge media insert and media remove functions
  tifm_7xx1: simplify eject function
  Add dummy_signal_irq function to save check in ISR
  Remove unused return value from signal_irq callback
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (37 commits)
  [S390] Avoid excessive inlining.
  [S390] Mark kernel text section read-only.
  [S390] Convert memory detection into C code.
  [S390] Calibrate delay and bogomips.
  [S390] Hypervisor filesystem (s390_hypfs) for z/VM
  [S390] Add crypto support for 3592 tape devices
  [S390] boot from NSS support
  [S390] Support for s390 Pseudo Random Number Generator
  [S390] ETR support.
  [S390] noexec protection
  [S390] move crypto options and some cleanup.
  [S390] cio: Don't spam debug feature.
  [S390] Cleanup of CHSC event handling.
  [S390] cio: declare hardware structures packed.
  [S390] Add set_fs(USER_DS) to start_thread().
  [S390] cio: Catch operand exceptions on stsch.
  [S390] Fix register usage description.
  [S390] kretprobe_trampoline_holder() in wrong section.
  [S390] Fix kprobes breakpoint handling.
  [S390] Update maintainers file.
  ...

Fix the key serial number collision avoidance code in key_alloc_serial().

This didn't use to be so much of a problem as the key serial numbers were
allocated from a simple incremental counter, and it would have to go through
two billion keys before it could possibly encounter a collision.  However, now
that random numbers are used instead, collisions are much more likely.

This is fixed by finding a hole in the rbtree where the next unused serial
number ought to be and using that by going almost back to the top of the
insertion routine and redoing the insertion with the new serial number rather
than trying to be clever and attempting to work out the insertion point
pointer directly.

This fixes kernel BZ #7727.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Minor cleanup
  [CIFS] Missing free in error path
  [CIFS] Reduce cifs stack space usage
  [CIFS] lseek polling returned stale EOF

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (40 commits)
  [MIPS] Yosemite: Fix missing parens in SERIAL_READ_1 macro
  [MIPS] Fix warnings in run_uncached on 32bit kernel
  [MIPS] Comment fix
  [MIPS] MT: Nuke duplicate mips_mt_regdump() prototype.
  [MIPS] Alchemy:  Fix PCI-memory access
  [MIPS] Move .set reorder out of conditional code
  [MIPS] Check FCSR for pending interrupts before restoring from a context.
  [MIPS] Jaguar ATX: Fix large number of warnings.
  [MIPS] Jaguar: Fix MAC address detection after platform_device conversion.
  [MIPS] SMTC: Make a bunch of functions and variables static.
  [MIPS] Use compat_sys_pselect6
  [MIPS] SMTC: Cleanup idle hook invocation.
  [MIPS] SELinux: Add security hooks to mips-mt {get,set}affinity
  [MIPS] IRIX: Linux coding style cleanups.
  [MIPS] PB1100: Fix pile of warnings
  [MIPS] Alchemy: Fix bunch of warnings
  [MIPS] Whitespace cleanups.
  [MIPS] Alchemy: Fix bunch more warnings.
  [MIPS] Use ARRAY_SIZE macro when appropriate
  [MIPS] Fix some whitespace damage
  ...

 Tildes as in path as in filenames are handled correctly now:
 only files, containing tilde '~', are backups, thus are not valid.

 [KJ]:
 Definition of `space' was removed, scripts/Kbuild.include has one.
 That definition was taken right from the GNU make manual, while Kbuild's
 version is original.

Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Bastian Blank <bastian@waldi.eu.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Oleg Verych <olecom@flower.upol.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>