- 27 Apr, 2019 10 commits
-
-
Johannes Berg authored
Rather than using NLA_UNSPEC for this type of thing, use NLA_MIN_LEN so we can make NLA_UNSPEC be NLA_REJECT under certain conditions for future attributes. While at it, also use NLA_EXACT_LEN for the struct example. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michal Kubecek says: ==================== make nla_nest_start() add NLA_F_NESTED flag One of the comments in recent review of the ethtool netlink series pointed out that proposed ethnl_nest_start() helper which adds NLA_F_NESTED to second argument of nla_nest_start() is not really specific to ethtool netlink code. That is hard to argue with as closer inspection revealed that exactly the same helper already exists in ipset code (except it's a macro rather than an inline function). Another observation was that even if NLA_F_NESTED flag was introduced in 2007, only few netlink based interfaces set it in kernel generated messages and even many recently added APIs omit it. That is unfortunate as without the flag, message parsers not familiar with attribute semantics cannot recognize nested attributes and do not see message structure; this affects e.g. wireshark dissector or mnl_nlmsg_fprintf() from libmnl. This is why I'm suggesting to rename existing nla_nest_start() to different name (nla_nest_start_noflag) and reintroduce nla_nest_start() as a wrapper adding NLA_F_NESTED flag. This is implemented in first patch which is mostly generated by spatch. Second patch drops ipset helper macros which lose their purpose. Third patch cleans up minor coding style issues found by checkpatch.pl in first patch. We could leave nla_nest_start() untouched and simply add a wrapper adding NLA_F_NESTED but that would probably preserve the state when even most new code doesn't set the flag. ==================== Signed-off-by: -
Michal Kubecek authored
This is a simple cleanup addressing two coding style issues found by checkpatch.pl in an earlier patch. It's submitted as a separate patch to keep the original patch as it was generated by spatch. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Michal Kubecek authored
After the previous commit, both ipset_nest_start() and ipset_nest_end() are just aliases for nla_nest_start() and nla_nest_end() so that there is no need to keep them. Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Michal Kubecek authored
Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most netlink based interfaces (including recently added ones) are still not setting it in kernel generated messages. Without the flag, message parsers not aware of attribute semantics (e.g. wireshark dissector or libmnl's mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display the structure of their contents. Unfortunately we cannot just add the flag everywhere as there may be userspace applications which check nlattr::nla_type directly rather than through a helper masking out the flags. Therefore the patch renames nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start() as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually are rewritten to use nla_nest_start(). Except for changes in include/net/netlink.h, the patch was generated using this semantic patch: @@ expression E1, E2; @@ -nla_nest_start(E1, E2) +nla_nest_start_noflag(E1, E2) @@ expression E1, E2; @@ -nla_nest_start_noflag(E1, E2 | NLA_F_NESTED) +nla_nest_start(E1, E2) Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== net/tls: small code cleanup This small patch set cleans up tls (mostly offload parts). Other than avoiding unnecessary error messages - no functional changes here. v2 (Saeed): - fix up Review tags; - remove the warning on failure completely. ==================== Reviewed-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Jakub Kicinski authored
To avoid a sparse warning byteswap the be32 sequence number before it's stored in the atomic value. While at it drop unnecessary brackets and use kernel's u64 type. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
There seems to be no reason for tls_ops to be defined in netdevice.h which is included in a lot of places. Don't wrap the struct/enum declaration in ifdefs, it trickles down unnecessary ifdefs into driver code. Signed-off-by:
-
Jakub Kicinski authored
tls_device_sk_destruct being set on a socket used to indicate that socket is a kTLS device one. That is no longer true - now we use sk_validate_xmit_skb pointer for that purpose. Remove the export. tls_device_attach() needs to be moved. While at it, remove the dead declaration of tls_sk_destruct(). Signed-off-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by:
-
Jakub Kicinski authored
Currently when CONFIG_TLS_DEVICE is set each time kTLS connection is opened and the offload is not successful (either because the underlying device doesn't support it or e.g. it's tables are full) a rate limited error will be printed to the logs. There is nothing wrong with failing TLS offload. SW path will process the packets just fine, drop the noisy messages. Signed-off-by:
-
- 26 Apr, 2019 30 commits
-
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2019-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Various updates, notably: * extended key ID support (from 802.11-2016) * per-STA TX power control support * mac80211 TX performance improvements * HE (802.11ax) updates * mesh link probing support * enhancements of multi-BSSID support (also related to HE) * OWE userspace processing support ==================== Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== code optimizations & bugfixes for HNS3 driver This patch-set includes code optimizations and bugfixes for the HNS3 ethernet controller driver. [patch 1/11 - 3/11] fixes some bugs about the IO path [patch 4/11 - 6/11] includes some optimization and bugfixes about mailbox handling [patch 7/11 - 11/11] adds misc code optimizations and bugfixes. Change log: V2->V3: fixes comments from Neil Horman, removes [patch 8/12] V1->V2: adds modification on [patch 8/12] ==================== Signed-off-by: -
Weihang Li authored
It's meaningless to trigger reset when failed to send command to IMP, because the failure is usually caused by no authority, illegal command and so on. When that happened, we just need to return the status code for further debugging. Signed-off-by:
Weihang Li <liweihang@hisilicon.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Huazhong Tan authored
This patch adds a check for the hns3_put_ring_config() to prevent double free, and for more readable, move the NULL assignment of priv->ring_data into the hns3_put_ring_config(). Signed-off-by:
-
liuzhongzhu authored
The test results show that the maximum time of hardware return to mac link state is 500MS.The software needs to set twice the maximum time of hardware return state (1000MS). If not modified, the loopback test returns probability failure. Signed-off-by:
liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by:
-
Huazhong Tan authored
When configure pause, current implementation returns directly after setup PFC without setup BP, which is not sufficient. So this patch fixes it, only return while setting PFC failed. Fixes: 44e59e37 ("net: hns3: do not return GE PFC setting err when initializing") Signed-off-by:
-
Huazhong Tan authored
Since the hardware does not handle mailboxes and the hardware reset include TQP reset, so it is unnecessary to reset TQP in the hclgevf_ae_stop() while doing VF reset. Also it is unnecessary to reset the remaining TQP when one reset fails. Signed-off-by:
-
Huazhong Tan authored
This patch uses a reserved byte in the hclge_mbx_vf_to_pf_cmd to save the need_resp flag, so when PF received the mailbox, it can use it to decise whether send a response to VF. For hclge_set_vf_uc_mac_addr(), it should use mbx_need_resp flag to decide whether send response to VF. Signed-off-by:
-
Huazhong Tan authored
Since irq handler and mailbox task will both update arq's count, so arq's count should use atomic_t instead of u32, otherwise its value may go wrong finally. Fixes: 07a0556a ("net: hns3: Changes to support ARQ(Asynchronous Receive Queue)") Signed-off-by:
-
Huazhong Tan authored
HCLGEVF_STATE_CMD_DISABLE is more suitable than HCLGEVF_STATE_RST_HANDLING to stop sending keep alive msg, since HCLGEVF_STATE_RST_HANDLING only be set when the reset task is running. Fixes: c59a85c0 ("net: hns3: stop sending keep alive msg to PF when VF is resetting") Signed-off-by:
-
Yunsheng Lin authored
The bdinfo handled in hns3_handle_bdinfo is only valid on the last BD of the current packet, currently the bd info may be handled based on the first BD if the packet has more than two BDs, which may cause rx error. This patch fixes it by using the last BD of the current packet in hns3_handle_bdinfo. Also, hns3_set_rx_skb_rss_type has used RSS hash value from the last BD of the current packet, so remove the same last BD calculation in hns3_set_rx_skb_rss_type and call it from hns3_handle_bdinfo. Fixes: e5597095 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
hns3_desc_unused() returns how many BD have been cleaned, but new buffer has not been attached to them. The register of HNS3_RING_RX_RING_FBDNUM_REG returns how many BD need allocating new buffer to or need to cleaned. So the remaining BD need to be clean is HNS3_RING_RX_RING_FBDNUM_REG - hns3_desc_unused(). Also, new buffer can not attach to the pending BD when the last BD is not handled, because memcpy has not been done on the first pending BD. This patch fixes by subtracting the pending BD num from unused_count after 'HNS3_RING_RX_RING_FBDNUM_REG - unused_count' is used to calculate the BD bum need to be clean. Fixes: e5597095 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll") Signed-off-by:
-
Yunsheng Lin authored
hns3_clean_tx_ring calls hns3_nic_reclaim_one_desc to clean buffers and set ring->next_to_clean, then hns3_nic_net_xmit reuses the cleaned buffers. But there are no memory barriers when buffers gets recycled, so the recycled buffers can be corrupted. This patch uses smp_store_release to update ring->next_to_clean and smp_load_acquire to read ring->next_to_clean to properly hand off buffers from hns3_clean_tx_ring to hns3_nic_net_xmit. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by:
-
Dirk van der Merwe authored
Device may be shutdown without the hardware being reinitialized, in which case we want to ensure we cleanup properly. This is especially important for kexec with traffic flowing. The shutdown procedures resembles the remove procedures, so we can reuse those common tasks. Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/nfc/st95hf/core.c: In function 'st95hf_irq_thread_handler': drivers/nfc/st95hf/core.c:786:26: warning: variable 'nfcddev' set but not used [-Wunused-but-set-variable] drivers/nfc/st95hf/core.c:784:17: warning: variable 'dev' set but not used [-Wunused-but-set-variable] They are never used since introduction in commit cab47333 ("NFC: Add STMicroelectronics ST95HF driver") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Eric Dumazet authored
I forgot to remove one rcu_read_unlock() before a return statement. Joy of mixing goto and return styles in a function :) Fixes: 4109a2c3 ("tipc: tipc_udp_recv() cleanup vs rcu verbs") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Heiner Kallweit authored
PHY's behave differently when being reset. Some reset registers to defaults, some don't. Some trigger an autoneg restart, some don't. So let's also set the autoneg restart bit when resetting. Then PHY behavior should be more consistent. Clearing BMCR_ISOLATE serves the same purpose and is borrowed from genphy_restart_aneg. BMCR holds the speed / duplex settings in fixed mode. Therefore we may have an issue if a soft reset resets BMCR to its default. So better call genphy_setup_forced() afterwards in fixed mode. We've seen no related complaint in the last >10 yrs, so let's treat it as an improvement. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Guenter Roeck authored
All Apple products use the same protocol for tethering over USB. To simplify the code and make it future proof, use USB_VENDOR_AND_INTERFACE_INFO() instead of USB_DEVICE_AND_INTERFACE_INFO() to automatically detect and support all existing and future Apple products using the same interface. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
David Ahern authored
fib6_result is not initialized in bpf_ipv6_fib_lookup and potentially passses garbage to the fib lookup which triggers a KASAN warning: [ 262.055450] ================================================================== [ 262.057640] BUG: KASAN: user-memory-access in fib6_rule_suppress+0x4b/0xce [ 262.059488] Read of size 8 at addr 00000a20000000b0 by task swapper/1/0 [ 262.061238] [ 262.061673] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.1.0-rc5+ #56 [ 262.063493] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014 [ 262.065593] Call Trace: [ 262.066277] <IRQ> [ 262.066848] dump_stack+0x7e/0xbb [ 262.067764] kasan_report+0x18b/0x1b5 [ 262.069921] __asan_load8+0x7f/0x81 [ 262.070879] fib6_rule_suppress+0x4b/0xce [ 262.071980] fib_rules_lookup+0x275/0x2cd [ 262.073090] fib6_lookup+0x119/0x218 [ 262.076457] bpf_ipv6_fib_lookup+0x39d/0x664 ... Initialize fib6_result to 0. Fixes: b1d40991 ("ipv6: Rename fib6_multipath_select and pass fib6_result") Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, refactor code a bit and mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/broadcom/cnic.c: In function ‘cnic_cm_process_kcqe’: drivers/net/ethernet/broadcom/cnic.c:4044:11: warning: this statement may fall through [-Wimplicit-fallthrough=] opcode = L4_KCQE_OPCODE_VALUE_CLOSE_COMP; drivers/net/ethernet/broadcom/cnic.c:4050:2: note: here case L4_KCQE_OPCODE_VALUE_RESET_RECEIVED: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c: In function ‘fwevtq_handler’: drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c:520:7: warning: this statement may fall through [-Wimplicit-fallthrough=] cpl = (void *)p; ~~~~^~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c:524:2: note: here case CPL_SGE_EGR_UPDATE: { ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: In file included from drivers/net/wimax/i2400m/debug-levels.h:30, from drivers/net/wimax/i2400m/control.c:86: drivers/net/wimax/i2400m/control.c: In function ‘i2400m_report_tlv_system_state’: ./include/linux/wimax/debug.h:200:4: warning: this statement may fall through [-Wimplicit-fallthrough=] do { \ ^ ./include/linux/wimax/debug.h:404:36: note: in expansion of macro ‘_d_printf’ #define d_printf(l, _dev, f, a...) _d_printf(l, "", _dev, f, ## a) ^~~~~~~~~ drivers/net/wimax/i2400m/control.c:354:3: note: in expansion of macro ‘d_printf’ d_printf(1, dev, "entering BS-negotiated idle mode\n"); ^~~~~~~~ drivers/net/wimax/i2400m/control.c:355:2: note: here case I2400M_SS_DISCONNECTING: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: -
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: In file included from drivers/net/ethernet/amd/xgbe/xgbe-drv.c:129: drivers/net/ethernet/amd/xgbe/xgbe-drv.c: In function ‘xgbe_set_hwtstamp_settings’: drivers/net/ethernet/amd/xgbe/xgbe-common.h:1392:9: warning: this statement may fall through [-Wimplicit-fallthrough=] (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \ ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-common.h:1419:2: note: in expansion of macro ‘SET_BITS’ SET_BITS((_var), \ ^~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1614:3: note: in expansion of macro ‘XGMAC_SET_BITS’ XGMAC_SET_BITS(mac_tscr, MAC_TSCR, TSVER2ENA, 1); ^~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1616:2: note: here case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: ^~~~ In file included from drivers/net/ethernet/amd/xgbe/xgbe-drv.c:129: drivers/net/ethernet/amd/xgbe/xgbe-common.h:1392:9: warning: this statement may fall through [-Wimplicit-fallthrough=] (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \ ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-common.h:1419:2: note: in expansion of macro ‘SET_BITS’ SET_BITS((_var), \ ^~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1625:3: note: in expansion of macro ‘XGMAC_SET_BITS’ XGMAC_SET_BITS(mac_tscr, MAC_TSCR, TSVER2ENA, 1); ^~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1627:2: note: here case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: ^~~~ In file included from drivers/net/ethernet/amd/xgbe/xgbe-drv.c:129: drivers/net/ethernet/amd/xgbe/xgbe-common.h:1392:9: warning: this statement may fall through [-Wimplicit-fallthrough=] (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \ ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-common.h:1419:2: note: in expansion of macro ‘SET_BITS’ SET_BITS((_var), \ ^~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1636:3: note: in expansion of macro ‘XGMAC_SET_BITS’ XGMAC_SET_BITS(mac_tscr, MAC_TSCR, TSVER2ENA, 1); ^~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:1638:2: note: here case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comments are modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by:
-
Gustavo A. R. Silva authored
Add missing break statement in order to prevent the code from falling through to cases SIOCGSTAMP_NEW and SIOCGSTAMPNS_NEW. This bug was found thanks to the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: 0768e170 ("net: socket: implement 64-bit timestamps") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: updates 2019-04-25 please apply one more patch series for qeth to net-next. Nothing special, just a bunch of cleanups. ==================== Signed-off-by: -
Julian Wiedmann authored
When building the L3 HW header for non-IP packets, trust the cast type that was passed as parameter. qeth_l3_get_cast_type() has most likely also used h_dest to determine the cast type, so we get the same result, and can remove that duplicated code. In the unlikely case that we would get a _different_ cast type, then that's based off a route lookup and should be considered authoritative. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
This de-duplicates the L2 and L3 cast-type code, and makes the L2 code a bit more robust by removing the fragile assumption that skb->data always points to the Ethernet Header. This would break in code paths where we pushed the HW header onto the skb. Signed-off-by:
-
Julian Wiedmann authored
The QETH_MAX_BUFFER_ELEMENTS() macro effectively returns a constant value. To avoid some redundant pointer chasing and computations in the xmit hot path, cache this value in the queue struct. Take this as opportunity to shrink some of the queue struct's fields to their appropriate value range, slightly reducing its total size. Signed-off-by:
-
Julian Wiedmann authored
On the first initialization of a queue, its Output Buffers are in a clean state with no attached resources. On every subsequent initialization, qeth_l?_stop_card() has previously put them in a clean state via qeth_drain_output_queues(). So the call to qeth_clear_output_buffer() is redundant and can be removed. While at it, move the initialization of the queue's card pointer into the queue allocation. It never changes afterwards. Signed-off-by:
-
Julian Wiedmann authored
We have helper macros for all possible device types, replace all remaining open-coded accesses to the type fields. Signed-off-by:
-
