1. 14 May, 2019 40 commits
    • Jérôme Glisse's avatar
      mm/mmu_notifier: contextual information for event triggering invalidation · 6f4f13e8
      Jérôme Glisse authored
      CPU page table update can happens for many reasons, not only as a result
      of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as
      a result of kernel activities (memory compression, reclaim, migration,
      ...).
      
      Users of mmu notifier API track changes to the CPU page table and take
      specific action for them.  While current API only provide range of virtual
      address affected by the change, not why the changes is happening.
      
      This patchset do the initial mechanical convertion of all the places that
      calls mmu_notifier_range_init to also provide the default MMU_NOTIFY_UNMAP
      event as well as the vma if it is know (most invalidation happens against
      a given vma).  Passing down the vma allows the users of mmu notifier to
      inspect the new vma page protection.
      
      The MMU_NOTIFY_UNMAP is always the safe default as users of mmu notifier
      should assume that every for the range is going away when that event
      happens.  A latter patch do convert mm call path to use a more appropriate
      events for each call.
      
      This is done as 2 patches so that no call site is forgotten especialy
      as it uses this following coccinelle patch:
      
      %<----------------------------------------------------------------------
      @@
      identifier I1, I2, I3, I4;
      @@
      static inline void mmu_notifier_range_init(struct mmu_notifier_range *I1,
      +enum mmu_notifier_event event,
      +unsigned flags,
      +struct vm_area_struct *vma,
      struct mm_struct *I2, unsigned long I3, unsigned long I4) { ... }
      
      @@
      @@
      -#define mmu_notifier_range_init(range, mm, start, end)
      +#define mmu_notifier_range_init(range, event, flags, vma, mm, start, end)
      
      @@
      expression E1, E3, E4;
      identifier I1;
      @@
      <...
      mmu_notifier_range_init(E1,
      +MMU_NOTIFY_UNMAP, 0, I1,
      I1->vm_mm, E3, E4)
      ...>
      
      @@
      expression E1, E2, E3, E4;
      identifier FN, VMA;
      @@
      FN(..., struct vm_area_struct *VMA, ...) {
      <...
      mmu_notifier_range_init(E1,
      +MMU_NOTIFY_UNMAP, 0, VMA,
      E2, E3, E4)
      ...> }
      
      @@
      expression E1, E2, E3, E4;
      identifier FN, VMA;
      @@
      FN(...) {
      struct vm_area_struct *VMA;
      <...
      mmu_notifier_range_init(E1,
      +MMU_NOTIFY_UNMAP, 0, VMA,
      E2, E3, E4)
      ...> }
      
      @@
      expression E1, E2, E3, E4;
      identifier FN;
      @@
      FN(...) {
      <...
      mmu_notifier_range_init(E1,
      +MMU_NOTIFY_UNMAP, 0, NULL,
      E2, E3, E4)
      ...> }
      ---------------------------------------------------------------------->%
      
      Applied with:
      spatch --all-includes --sp-file mmu-notifier.spatch fs/proc/task_mmu.c --in-place
      spatch --sp-file mmu-notifier.spatch --dir kernel/events/ --in-place
      spatch --sp-file mmu-notifier.spatch --dir mm --in-place
      
      Link: http://lkml.kernel.org/r/20190326164747.24405-6-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Reviewed-by: default avatarRalph Campbell <rcampbell@nvidia.com>
      Reviewed-by: default avatarIra Weiny <ira.weiny@intel.com>
      Cc: Christian König <christian.koenig@amd.com>
      Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Cc: Jani Nikula <jani.nikula@linux.intel.com>
      Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
      Cc: Jan Kara <jack@suse.cz>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Peter Xu <peterx@redhat.com>
      Cc: Felix Kuehling <Felix.Kuehling@amd.com>
      Cc: Jason Gunthorpe <jgg@mellanox.com>
      Cc: Ross Zwisler <zwisler@kernel.org>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Radim Krcmar <rkrcmar@redhat.com>
      Cc: Michal Hocko <mhocko@kernel.org>
      Cc: Christian Koenig <christian.koenig@amd.com>
      Cc: John Hubbard <jhubbard@nvidia.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6f4f13e8
    • Jérôme Glisse's avatar
      mm/mmu_notifier: contextual information for event enums · d87f055b
      Jérôme Glisse authored
      CPU page table update can happens for many reasons, not only as a result
      of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as
      a result of kernel activities (memory compression, reclaim, migration,
      ...).
      
      This patch introduce a set of enums that can be associated with each of
      the events triggering a mmu notifier.  Latter patches take advantages of
      those enum values.
      
          - UNMAP: munmap() or mremap()
          - CLEAR: page table is cleared (migration, compaction, reclaim, ...)
          - PROTECTION_VMA: change in access protections for the range
          - PROTECTION_PAGE: change in access protections for page in the range
          - SOFT_DIRTY: soft dirtyness tracking
      
      Being able to identify munmap() and mremap() from other reasons why the
      page table is cleared is important to allow user of mmu notifier to update
      their own internal tracking structure accordingly (on munmap or mremap it
      is not longer needed to track range of virtual address as it becomes
      invalid).
      
      Link: http://lkml.kernel.org/r/20190326164747.24405-5-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Reviewed-by: default avatarRalph Campbell <rcampbell@nvidia.com>
      Reviewed-by: default avatarIra Weiny <ira.weiny@intel.com>
      Cc: Christian König <christian.koenig@amd.com>
      Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Cc: Jani Nikula <jani.nikula@linux.intel.com>
      Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
      Cc: Jan Kara <jack@suse.cz>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Peter Xu <peterx@redhat.com>
      Cc: Felix Kuehling <Felix.Kuehling@amd.com>
      Cc: Jason Gunthorpe <jgg@mellanox.com>
      Cc: Ross Zwisler <zwisler@kernel.org>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Radim Krcmar <rkrcmar@redhat.com>
      Cc: Michal Hocko <mhocko@kernel.org>
      Cc: Christian Koenig <christian.koenig@amd.com>
      Cc: John Hubbard <jhubbard@nvidia.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d87f055b
    • Jérôme Glisse's avatar
      mm/mmu_notifier: convert mmu_notifier_range->blockable to a flags · 27560ee9
      Jérôme Glisse authored
      Use an unsigned field for flags other than blockable and convert the
      blockable field to be one of those flags.
      
      Link: http://lkml.kernel.org/r/20190326164747.24405-4-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Reviewed-by: default avatarRalph Campbell <rcampbell@nvidia.com>
      Reviewed-by: default avatarIra Weiny <ira.weiny@intel.com>
      Cc: Christian König <christian.koenig@amd.com>
      Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Cc: Jani Nikula <jani.nikula@linux.intel.com>
      Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
      Cc: Jan Kara <jack@suse.cz>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Peter Xu <peterx@redhat.com>
      Cc: Felix Kuehling <Felix.Kuehling@amd.com>
      Cc: Jason Gunthorpe <jgg@mellanox.com>
      Cc: Ross Zwisler <zwisler@kernel.org>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Radim Krcmar <rkrcmar@redhat.com>
      Cc: Michal Hocko <mhocko@kernel.org>
      Cc: Christian Koenig <christian.koenig@amd.com>
      Cc: John Hubbard <jhubbard@nvidia.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      27560ee9
    • Jérôme Glisse's avatar
      mm/mmu_notifier: convert user range->blockable to helper function · dfcd6660
      Jérôme Glisse authored
      Use the mmu_notifier_range_blockable() helper function instead of directly
      dereferencing the range->blockable field.  This is done to make it easier
      to change the mmu_notifier range field.
      
      This patch is the outcome of the following coccinelle patch:
      
      %<-------------------------------------------------------------------
      @@
      identifier I1, FN;
      @@
      FN(..., struct mmu_notifier_range *I1, ...) {
      <...
      -I1->blockable
      +mmu_notifier_range_blockable(I1)
      ...>
      }
      ------------------------------------------------------------------->%
      
      spatch --in-place --sp-file blockable.spatch --dir .
      
      Link: http://lkml.kernel.org/r/20190326164747.24405-3-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Reviewed-by: default avatarRalph Campbell <rcampbell@nvidia.com>
      Reviewed-by: default avatarIra Weiny <ira.weiny@intel.com>
      Cc: Christian König <christian.koenig@amd.com>
      Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Cc: Jani Nikula <jani.nikula@linux.intel.com>
      Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
      Cc: Jan Kara <jack@suse.cz>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Peter Xu <peterx@redhat.com>
      Cc: Felix Kuehling <Felix.Kuehling@amd.com>
      Cc: Jason Gunthorpe <jgg@mellanox.com>
      Cc: Ross Zwisler <zwisler@kernel.org>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Radim Krcmar <rkrcmar@redhat.com>
      Cc: Michal Hocko <mhocko@kernel.org>
      Cc: Christian Koenig <christian.koenig@amd.com>
      Cc: John Hubbard <jhubbard@nvidia.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      dfcd6660
    • Jérôme Glisse's avatar
      mm/mmu_notifier: helper to test if a range invalidation is blockable · 4a83bfe9
      Jérôme Glisse authored
      Patch series "mmu notifier provide context informations", v6.
      
      Here I am not posting users of this, they already have been posted to
      appropriate mailing list [6] and will be merge through the appropriate
      tree once this patchset is upstream.
      
      Note that this serie does not change any behavior for any existing code.
      It just pass down more information to mmu notifier listener.
      
      The rationale for this patchset:
      
      CPU page table update can happens for many reasons, not only as a result
      of a syscall (munmap(), mprotect(), mremap(), madvise(), ...) but also as
      a result of kernel activities (memory compression, reclaim, migration,
      ...).
      
      This patchset introduce a set of enums that can be associated with each of
      the events triggering a mmu notifier:
      
          - UNMAP: munmap() or mremap()
          - CLEAR: page table is cleared (migration, compaction, reclaim, ...)
          - PROTECTION_VMA: change in access protections for the range
          - PROTECTION_PAGE: change in access protections for page in the range
          - SOFT_DIRTY: soft dirtyness tracking
      
      Being able to identify munmap() and mremap() from other reasons why the
      page table is cleared is important to allow user of mmu notifier to update
      their own internal tracking structure accordingly (on munmap or mremap it
      is not longer needed to track range of virtual address as it becomes
      invalid).  Without this serie, driver are force to assume that every
      notification is an munmap which triggers useless trashing within drivers
      that associate structure with range of virtual address.  Each driver is
      force to free up its tracking structure and then restore it on next device
      page fault.  With this series we can also optimize device page table update.  Patches to use this are at
      
      https://lkml.org/lkml/2019/1/23/833
      https://lkml.org/lkml/2019/1/23/834
      https://lkml.org/lkml/2019/1/23/832
      https://lkml.org/lkml/2019/1/23/831
      
      Moreover this can also be used to optimize out some page table updates
      such as for KVM where we can update the secondary MMU directly from the
      callback instead of clearing it.
      
      ACKS AMD/RADEON https://lkml.org/lkml/2019/2/1/395
      ACKS RDMA https://lkml.org/lkml/2018/12/6/1473
      
      This patch (of 8):
      
      Simple helpers to test if range invalidation is blockable.  Latter patches
      use cocinnelle to convert all direct dereference of range-> blockable to
      use this function instead so that we can convert the blockable field to an
      unsigned for more flags.
      
      Link: http://lkml.kernel.org/r/20190326164747.24405-2-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Reviewed-by: default avatarRalph Campbell <rcampbell@nvidia.com>
      Reviewed-by: default avatarIra Weiny <ira.weiny@intel.com>
      Cc: Christian König <christian.koenig@amd.com>
      Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
      Cc: Jani Nikula <jani.nikula@linux.intel.com>
      Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
      Cc: Jan Kara <jack@suse.cz>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Peter Xu <peterx@redhat.com>
      Cc: Felix Kuehling <Felix.Kuehling@amd.com>
      Cc: Jason Gunthorpe <jgg@mellanox.com>
      Cc: Ross Zwisler <zwisler@kernel.org>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Radim Krcmar <rkrcmar@redhat.com>
      Cc: Michal Hocko <mhocko@kernel.org>
      Cc: Christian Koenig <christian.koenig@amd.com>
      Cc: John Hubbard <jhubbard@nvidia.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4a83bfe9
    • Jérôme Glisse's avatar
      mm/hmm: convert various hmm_pfn_* to device_entry which is a better name · 391aab11
      Jérôme Glisse authored
      Convert hmm_pfn_* to device_entry_* as here we are dealing with device
      driver specific entry format and hmm provide helpers to allow differents
      components (including HMM) to create/parse device entry.
      
      We keep wrapper with the old name so that we can convert driver to use the
      new API in stages in each device driver tree.  This will get remove once
      all driver are converted.
      
      Link: http://lkml.kernel.org/r/20190403193318.16478-13-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Cc: Ralph Campbell <rcampbell@nvidia.com>
      Cc: John Hubbard <jhubbard@nvidia.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Ira Weiny <ira.weiny@intel.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Balbir Singh <bsingharora@gmail.com>
      Cc: Dan Carpenter <dan.carpenter@oracle.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Souptick Joarder <jrdr.linux@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      391aab11
    • Jérôme Glisse's avatar
      mm/hmm: add a helper function that fault pages and map them to a device · 55c0ece8
      Jérôme Glisse authored
      This is a all in one helper that fault pages in a range and map them to a
      device so that every single device driver do not have to re-implement this
      common pattern.
      
      This is taken from ODP RDMA in preparation of ODP RDMA convertion.  It
      will be use by nouveau and other drivers.
      
      [jglisse@redhat.com: Was using wrong field and wrong enum]
        Link: http://lkml.kernel.org/r/20190409175340.26614-1-jglisse@redhat.com
      Link: http://lkml.kernel.org/r/20190403193318.16478-12-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Cc: Ralph Campbell <rcampbell@nvidia.com>
      Cc: John Hubbard <jhubbard@nvidia.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Souptick Joarder <jrdr.linux@gmail.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Balbir Singh <bsingharora@gmail.com>
      Cc: Dan Carpenter <dan.carpenter@oracle.com>
      Cc: Ira Weiny <ira.weiny@intel.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      55c0ece8
    • Jérôme Glisse's avatar
      mm/hmm: add helpers to test if mm is still alive or not · 20239417
      Jérôme Glisse authored
      The device driver can have kernel thread or worker doing work against a
      process mm and it is useful for those to test wether the mm is dead or
      alive to avoid doing useless work.  Add an helper to test that so that
      driver can bail out early if a process is dying.
      
      Note that the helper does not perform any lock synchronization and thus is
      just a hint ie a process might be dying but the helper might still return
      the process as alive.  All HMM functions are safe to use in that case as
      HMM internal properly protect itself with lock.  If driver use this helper
      with non HMM functions it should ascertain that it is safe to do so.
      
      Link: http://lkml.kernel.org/r/20190403193318.16478-11-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Cc: Ralph Campbell <rcampbell@nvidia.com>
      Cc: John Hubbard <jhubbard@nvidia.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Ira Weiny <ira.weiny@intel.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Balbir Singh <bsingharora@gmail.com>
      Cc: Dan Carpenter <dan.carpenter@oracle.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Souptick Joarder <jrdr.linux@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      20239417
    • Jérôme Glisse's avatar
      mm/hmm: allow to mirror vma of a file on a DAX backed filesystem · 992de9a8
      Jérôme Glisse authored
      HMM mirror is a device driver helpers to mirror range of virtual address.
      It means that the process jobs running on the device can access the same
      virtual address as the CPU threads of that process.  This patch adds
      support for mirroring mapping of file that are on a DAX block device (ie
      range of virtual address that is an mmap of a file in a filesystem on a
      DAX block device).  There is no reason to not support such case when
      mirroring virtual address on a device.
      
      Note that unlike GUP code we do not take page reference hence when we
      back-off we have nothing to undo.
      
      [jglisse@redhat.com: move THP and hugetlbfs code path behind #if KCONFIG]
        Link: http://lkml.kernel.org/r/20190422163741.13029-1-jglisse@redhat.com
      Link: http://lkml.kernel.org/r/20190403193318.16478-10-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Reviewed-by: default avatarRalph Campbell <rcampbell@nvidia.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: John Hubbard <jhubbard@nvidia.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Balbir Singh <bsingharora@gmail.com>
      Cc: Dan Carpenter <dan.carpenter@oracle.com>
      Cc: Ira Weiny <ira.weiny@intel.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Souptick Joarder <jrdr.linux@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      992de9a8
    • Jérôme Glisse's avatar
      mm/hmm: mirror hugetlbfs (snapshoting, faulting and DMA mapping) · 63d5066f
      Jérôme Glisse authored
      HMM mirror is a device driver helpers to mirror range of virtual address.
      It means that the process jobs running on the device can access the same
      virtual address as the CPU threads of that process.  This patch adds
      support for hugetlbfs mapping (ie range of virtual address that are mmap
      of a hugetlbfs).
      
      [rcampbell@nvidia.com: fix initial PFN for hugetlbfs pages]
        Link: http://lkml.kernel.org/r/20190419233536.8080-1-rcampbell@nvidia.com
      Link: http://lkml.kernel.org/r/20190403193318.16478-9-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Signed-off-by: default avatarRalph Campbell <rcampbell@nvidia.com>
      Reviewed-by: default avatarRalph Campbell <rcampbell@nvidia.com>
      Reviewed-by: default avatarIra Weiny <ira.weiny@intel.com>
      Cc: John Hubbard <jhubbard@nvidia.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Balbir Singh <bsingharora@gmail.com>
      Cc: Dan Carpenter <dan.carpenter@oracle.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Souptick Joarder <jrdr.linux@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      63d5066f
    • Jérôme Glisse's avatar
      mm/hmm: add default fault flags to avoid the need to pre-fill pfns arrays · 023a019a
      Jérôme Glisse authored
      The HMM mirror API can be use in two fashions.  The first one where the
      HMM user coalesce multiple page faults into one request and set flags per
      pfns for of those faults.  The second one where the HMM user want to
      pre-fault a range with specific flags.  For the latter one it is a waste
      to have the user pre-fill the pfn arrays with a default flags value.
      
      This patch adds a default flags value allowing user to set them for a
      range without having to pre-fill the pfn array.
      
      Link: http://lkml.kernel.org/r/20190403193318.16478-8-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Reviewed-by: default avatarRalph Campbell <rcampbell@nvidia.com>
      Cc: John Hubbard <jhubbard@nvidia.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Balbir Singh <bsingharora@gmail.com>
      Cc: Dan Carpenter <dan.carpenter@oracle.com>
      Cc: Ira Weiny <ira.weiny@intel.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Souptick Joarder <jrdr.linux@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      023a019a
    • Jérôme Glisse's avatar
      mm/hmm: improve driver API to work and wait over a range · a3e0d41c
      Jérôme Glisse authored
      A common use case for HMM mirror is user trying to mirror a range and
      before they could program the hardware it get invalidated by some core mm
      event.  Instead of having user re-try right away to mirror the range
      provide a completion mechanism for them to wait for any active
      invalidation affecting the range.
      
      This also changes how hmm_range_snapshot() and hmm_range_fault() works by
      not relying on vma so that we can drop the mmap_sem when waiting and
      lookup the vma again on retry.
      
      Link: http://lkml.kernel.org/r/20190403193318.16478-7-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Reviewed-by: default avatarRalph Campbell <rcampbell@nvidia.com>
      Cc: John Hubbard <jhubbard@nvidia.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Dan Carpenter <dan.carpenter@oracle.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Balbir Singh <bsingharora@gmail.com>
      Cc: Ira Weiny <ira.weiny@intel.com>
      Cc: Souptick Joarder <jrdr.linux@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a3e0d41c
    • Jérôme Glisse's avatar
      mm/hmm: improve and rename hmm_vma_fault() to hmm_range_fault() · 73231612
      Jérôme Glisse authored
      Minor optimization around hmm_pte_need_fault().  Rename for consistency
      between code, comments and documentation.  Also improves the comments on
      all the possible returns values.  Improve the function by returning the
      number of populated entries in pfns array.
      
      Link: http://lkml.kernel.org/r/20190403193318.16478-6-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Reviewed-by: default avatarRalph Campbell <rcampbell@nvidia.com>
      Cc: John Hubbard <jhubbard@nvidia.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Balbir Singh <bsingharora@gmail.com>
      Cc: Dan Carpenter <dan.carpenter@oracle.com>
      Cc: Ira Weiny <ira.weiny@intel.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Souptick Joarder <jrdr.linux@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      73231612
    • Jérôme Glisse's avatar
      mm/hmm: improve and rename hmm_vma_get_pfns() to hmm_range_snapshot() · 25f23a0c
      Jérôme Glisse authored
      Rename for consistency between code, comments and documentation.  Also
      improves the comments on all the possible returns values.  Improve the
      function by returning the number of populated entries in pfns array.
      
      Link: http://lkml.kernel.org/r/20190403193318.16478-5-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Reviewed-by: default avatarRalph Campbell <rcampbell@nvidia.com>
      Reviewed-by: default avatarJohn Hubbard <jhubbard@nvidia.com>
      Reviewed-by: default avatarIra Weiny <ira.weiny@intel.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Balbir Singh <bsingharora@gmail.com>
      Cc: Dan Carpenter <dan.carpenter@oracle.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Souptick Joarder <jrdr.linux@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      25f23a0c
    • Jérôme Glisse's avatar
      mm/hmm: do not erase snapshot when a range is invalidated · 9f454612
      Jérôme Glisse authored
      Users of HMM might be using the snapshot information to do preparatory
      step like dma mapping pages to a device before checking for invalidation
      through hmm_vma_range_done() so do not erase that information and assume
      users will do the right thing.
      
      Link: http://lkml.kernel.org/r/20190403193318.16478-4-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Reviewed-by: default avatarRalph Campbell <rcampbell@nvidia.com>
      Reviewed-by: default avatarJohn Hubbard <jhubbard@nvidia.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Balbir Singh <bsingharora@gmail.com>
      Cc: Dan Carpenter <dan.carpenter@oracle.com>
      Cc: Ira Weiny <ira.weiny@intel.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Souptick Joarder <jrdr.linux@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9f454612
    • Jérôme Glisse's avatar
      mm/hmm: use reference counting for HMM struct · 704f3f2c
      Jérôme Glisse authored
      Every time I read the code to check that the HMM structure does not vanish
      before it should thanks to the many lock protecting its removal i get a
      headache.  Switch to reference counting instead it is much easier to
      follow and harder to break.  This also remove some code that is no longer
      needed with refcounting.
      
      Link: http://lkml.kernel.org/r/20190403193318.16478-3-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Reviewed-by: default avatarRalph Campbell <rcampbell@nvidia.com>
      Cc: John Hubbard <jhubbard@nvidia.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Balbir Singh <bsingharora@gmail.com>
      Cc: Dan Carpenter <dan.carpenter@oracle.com>
      Cc: Ira Weiny <ira.weiny@intel.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Souptick Joarder <jrdr.linux@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      704f3f2c
    • Jérôme Glisse's avatar
      mm/hmm: select mmu notifier when selecting HMM · 734fb899
      Jérôme Glisse authored
      To avoid random config build issue, select mmu notifier when HMM is
      selected.  In any cases when HMM get selected it will be by users that
      will also wants the mmu notifier.
      
      Link: http://lkml.kernel.org/r/20190403193318.16478-2-jglisse@redhat.comSigned-off-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Acked-by: default avatarBalbir Singh <bsingharora@gmail.com>
      Cc: Ralph Campbell <rcampbell@nvidia.com>
      Cc: John Hubbard <jhubbard@nvidia.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Dan Carpenter <dan.carpenter@oracle.com>
      Cc: Ira Weiny <ira.weiny@intel.com>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Souptick Joarder <jrdr.linux@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      734fb899
    • Mike Kravetz's avatar
      hugetlb: use same fault hash key for shared and private mappings · 1b426bac
      Mike Kravetz authored
      hugetlb uses a fault mutex hash table to prevent page faults of the
      same pages concurrently.  The key for shared and private mappings is
      different.  Shared keys off address_space and file index.  Private keys
      off mm and virtual address.  Consider a private mappings of a populated
      hugetlbfs file.  A fault will map the page from the file and if needed
      do a COW to map a writable page.
      
      Hugetlbfs hole punch uses the fault mutex to prevent mappings of file
      pages.  It uses the address_space file index key.  However, private
      mappings will use a different key and could race with this code to map
      the file page.  This causes problems (BUG) for the page cache remove
      code as it expects the page to be unmapped.  A sample stack is:
      
      page dumped because: VM_BUG_ON_PAGE(page_mapped(page))
      kernel BUG at mm/filemap.c:169!
      ...
      RIP: 0010:unaccount_page_cache_page+0x1b8/0x200
      ...
      Call Trace:
      __delete_from_page_cache+0x39/0x220
      delete_from_page_cache+0x45/0x70
      remove_inode_hugepages+0x13c/0x380
      ? __add_to_page_cache_locked+0x162/0x380
      hugetlbfs_fallocate+0x403/0x540
      ? _cond_resched+0x15/0x30
      ? __inode_security_revalidate+0x5d/0x70
      ? selinux_file_permission+0x100/0x130
      vfs_fallocate+0x13f/0x270
      ksys_fallocate+0x3c/0x80
      __x64_sys_fallocate+0x1a/0x20
      do_syscall_64+0x5b/0x180
      entry_SYSCALL_64_after_hwframe+0x44/0xa9
      
      There seems to be another potential COW issue/race with this approach
      of different private and shared keys as noted in commit 8382d914
      ("mm, hugetlb: improve page-fault scalability").
      
      Since every hugetlb mapping (even anon and private) is actually a file
      mapping, just use the address_space index key for all mappings.  This
      results in potentially more hash collisions.  However, this should not
      be the common case.
      
      Link: http://lkml.kernel.org/r/20190328234704.27083-3-mike.kravetz@oracle.com
      Link: http://lkml.kernel.org/r/20190412165235.t4sscoujczfhuiyt@linux-r8p5
      Fixes: b5cec28d ("hugetlbfs: truncate_hugepages() takes a range of pages")
      Signed-off-by: default avatarMike Kravetz <mike.kravetz@oracle.com>
      Reviewed-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Reviewed-by: default avatarDavidlohr Bueso <dbueso@suse.de>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
      Cc: Michal Hocko <mhocko@kernel.org>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1b426bac
    • Mike Kravetz's avatar
      hugetlbfs: on restore reserve error path retain subpool reservation · 0919e1b6
      Mike Kravetz authored
      When a huge page is allocated, PagePrivate() is set if the allocation
      consumed a reservation.  When freeing a huge page, PagePrivate is checked.
      If set, it indicates the reservation should be restored.  PagePrivate
      being set at free huge page time mostly happens on error paths.
      
      When huge page reservations are created, a check is made to determine if
      the mapping is associated with an explicitly mounted filesystem.  If so,
      pages are also reserved within the filesystem.  The default action when
      freeing a huge page is to decrement the usage count in any associated
      explicitly mounted filesystem.  However, if the reservation is to be
      restored the reservation/use count within the filesystem should not be
      decrementd.  Otherwise, a subsequent page allocation and free for the same
      mapping location will cause the file filesystem usage to go 'negative'.
      
      Filesystem                         Size  Used Avail Use% Mounted on
      nodev                              4.0G -4.0M  4.1G    - /opt/hugepool
      
      To fix, when freeing a huge page do not adjust filesystem usage if
      PagePrivate() is set to indicate the reservation should be restored.
      
      I did not cc stable as the problem has been around since reserves were
      added to hugetlbfs and nobody has noticed.
      
      Link: http://lkml.kernel.org/r/20190328234704.27083-2-mike.kravetz@oracle.comSigned-off-by: default avatarMike Kravetz <mike.kravetz@oracle.com>
      Reviewed-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Davidlohr Bueso <dave@stgolabs.net>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: Michal Hocko <mhocko@kernel.org>
      Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0919e1b6
    • Baoquan He's avatar
      drivers/base/memory.c: clean up relics in function parameters · 063b8a4c
      Baoquan He authored
      The input parameter 'phys_index' of memory_block_action() is actually the
      section number, but not the phys_index of memory_block.  This is a relic
      from the past when one memory block could only contain one section.
      Rename it to start_section_nr.
      
      And also in remove_memory_section(), the 'node_id' and 'phys_device'
      arguments are not used by anyone.  Remove them.
      
      Link: http://lkml.kernel.org/r/20190329144250.14315-2-bhe@redhat.comSigned-off-by: default avatarBaoquan He <bhe@redhat.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.com>
      Reviewed-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
      Reviewed-by: default avatarMukesh Ojha <mojha@codeaurora.org>
      Reviewed-by: default avatarOscar Salvador <osalvador@suse.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      063b8a4c
    • Baoquan He's avatar
      mm/sparse.c: clean up obsolete code comment · 7567cfc5
      Baoquan He authored
      The code comment above sparse_add_one_section() is obsolete and incorrect.
      Clean it up and write a new one.
      
      Link: http://lkml.kernel.org/r/20190329144250.14315-1-bhe@redhat.comSigned-off-by: default avatarBaoquan He <bhe@redhat.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.com>
      Reviewed-by: default avatarOscar Salvador <osalvador@suse.de>
      Reviewed-by: default avatarMukesh Ojha <mojha@codeaurora.org>
      Reviewed-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7567cfc5
    • David Hildenbrand's avatar
    • Peng Fan's avatar
      mm/swap.c: __pagevec_lru_add_fn: typo fix · dae966dc
      Peng Fan authored
      There is no function named munlock_vma_pages().  Correct it to
      munlock_vma_page().
      
      Link: http://lkml.kernel.org/r/20190402095609.27181-1-peng.fan@nxp.comSigned-off-by: default avatarPeng Fan <peng.fan@nxp.com>
      Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Reviewed-by: default avatarMukesh Ojha <mojha@codeaurora.org>
      Acked-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      dae966dc
    • Oscar Salvador's avatar
      mm/hugetlb: get rid of NODEMASK_ALLOC · 2d0adf7e
      Oscar Salvador authored
      NODEMASK_ALLOC is used to allocate a nodemask bitmap, and it does it by
      first determining whether it should be allocated on the stack or
      dynamically, depending on NODES_SHIFT.  Right now, it goes the dynamic
      path whenever the nodemask_t is above 32 bytes.
      
      Although we could bump it to a reasonable value, the largest a nodemask_t
      can get is 128 bytes, so since __nr_hugepages_store_common is called from
      a rather short stack we can just get rid of the NODEMASK_ALLOC call here.
      
      This reduces some code churn and complexity.
      
      Link: http://lkml.kernel.org/r/20190402133415.21983-1-osalvador@suse.deSigned-off-by: default avatarOscar Salvador <osalvador@suse.de>
      Reviewed-by: default avatarMike Kravetz <mike.kravetz@oracle.com>
      Reviewed-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Cc: Alex Ghiti <alex@ghiti.fr>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Jing Xiangfeng <jingxiangfeng@huawei.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      2d0adf7e
    • Mike Kravetz's avatar
      hugetlbfs: fix potential over/underflow setting node specific nr_hugepages · fd875dca
      Mike Kravetz authored
      The number of node specific huge pages can be set via a file such as:
      /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages
      When a node specific value is specified, the global number of huge pages
      must also be adjusted.  This adjustment is calculated as the specified
      node specific value + (global value - current node value).  If the node
      specific value provided by the user is large enough, this calculation
      could overflow an unsigned long leading to a smaller than expected number
      of huge pages.
      
      To fix, check the calculation for overflow.  If overflow is detected, use
      ULONG_MAX as the requested value.  This is inline with the user request to
      allocate as many huge pages as possible.
      
      It was also noticed that the above calculation was done outside the
      hugetlb_lock.  Therefore, the values could be inconsistent and result in
      underflow.  To fix, the calculation is moved within the routine
      set_max_huge_pages() where the lock is held.
      
      In addition, the code in __nr_hugepages_store_common() which tries to
      handle the case of not being able to allocate a node mask would likely
      result in incorrect behavior.  Luckily, it is very unlikely we will ever
      take this path.  If we do, simply return ENOMEM.
      
      Link: http://lkml.kernel.org/r/20190328220533.19884-1-mike.kravetz@oracle.comSigned-off-by: default avatarMike Kravetz <mike.kravetz@oracle.com>
      Reported-by: default avatarJing Xiangfeng <jingxiangfeng@huawei.com>
      Reviewed-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Reviewed-by: default avatarOscar Salvador <osalvador@suse.de>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Alex Ghiti <alex@ghiti.fr>
      Cc: Jing Xiangfeng <jingxiangfeng@huawei.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      fd875dca
    • Linxu Fang's avatar
      mem-hotplug: fix node spanned pages when we have a node with only ZONE_MOVABLE · 299c83dc
      Linxu Fang authored
      342332e6 ("mm/page_alloc.c: introduce kernelcore=mirror option") and
      later patches rewrote the calculation of node spanned pages.
      
      e506b996 ("mem-hotplug: fix node spanned pages when we have a movable
      node"), but the current code still has problems,
      
      When we have a node with only zone_movable and the node id is not zero,
      the size of node spanned pages is double added.
      
      That's because we have an empty normal zone, and zone_start_pfn or
      zone_end_pfn is not between arch_zone_lowest_possible_pfn and
      arch_zone_highest_possible_pfn, so we need to use clamp to constrain the
      range just like the commit <96e907d1> (bootmem: Reimplement
      __absent_pages_in_range() using for_each_mem_pfn_range()).
      
      e.g.
      Zone ranges:
        DMA      [mem 0x0000000000001000-0x0000000000ffffff]
        DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
        Normal   [mem 0x0000000100000000-0x000000023fffffff]
      Movable zone start for each node
        Node 0: 0x0000000100000000
        Node 1: 0x0000000140000000
      Early memory node ranges
        node   0: [mem 0x0000000000001000-0x000000000009efff]
        node   0: [mem 0x0000000000100000-0x00000000bffdffff]
        node   0: [mem 0x0000000100000000-0x000000013fffffff]
        node   1: [mem 0x0000000140000000-0x000000023fffffff]
      
      node 0 DMA	spanned:0xfff   present:0xf9e   absent:0x61
      node 0 DMA32	spanned:0xff000 present:0xbefe0	absent:0x40020
      node 0 Normal	spanned:0	present:0	absent:0
      node 0 Movable	spanned:0x40000 present:0x40000 absent:0
      On node 0 totalpages(node_present_pages): 1048446
      node_spanned_pages:1310719
      node 1 DMA	spanned:0	    present:0		absent:0
      node 1 DMA32	spanned:0	    present:0		absent:0
      node 1 Normal	spanned:0x100000    present:0x100000	absent:0
      node 1 Movable	spanned:0x100000    present:0x100000	absent:0
      On node 1 totalpages(node_present_pages): 2097152
      node_spanned_pages:2097152
      Memory: 6967796K/12582392K available (16388K kernel code, 3686K rwdata,
      4468K rodata, 2160K init, 10444K bss, 5614596K reserved, 0K
      cma-reserved)
      
      It shows that the current memory of node 1 is double added.
      After this patch, the problem is fixed.
      
      node 0 DMA	spanned:0xfff   present:0xf9e   absent:0x61
      node 0 DMA32	spanned:0xff000 present:0xbefe0	absent:0x40020
      node 0 Normal	spanned:0	present:0	absent:0
      node 0 Movable	spanned:0x40000 present:0x40000 absent:0
      On node 0 totalpages(node_present_pages): 1048446
      node_spanned_pages:1310719
      node 1 DMA	spanned:0	    present:0		absent:0
      node 1 DMA32	spanned:0	    present:0		absent:0
      node 1 Normal	spanned:0	    present:0		absent:0
      node 1 Movable	spanned:0x100000    present:0x100000	absent:0
      On node 1 totalpages(node_present_pages): 1048576
      node_spanned_pages:1048576
      memory: 6967796K/8388088K available (16388K kernel code, 3686K rwdata,
      4468K rodata, 2160K init, 10444K bss, 1420292K reserved, 0K
      cma-reserved)
      
      Link: http://lkml.kernel.org/r/1554178276-10372-1-git-send-email-fanglinxu@huawei.comSigned-off-by: default avatarLinxu Fang <fanglinxu@huawei.com>
      Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
      Cc: Xishi Qiu <qiuxishi@huawei.com>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Vlastimil Babka <vbabka@suse.cz>
      Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
      Cc: Oscar Salvador <osalvador@suse.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      299c83dc
    • Yafang Shao's avatar
      mm/vmscan: drop may_writepage and classzone_idx from direct reclaim begin template · 3481c37f
      Yafang Shao authored
      There are three tracepoints using this template, which are
      mm_vmscan_direct_reclaim_begin,
      mm_vmscan_memcg_reclaim_begin,
      mm_vmscan_memcg_softlimit_reclaim_begin.
      
      Regarding mm_vmscan_direct_reclaim_begin,
      sc.may_writepage is !laptop_mode, that's a static setting, and
      reclaim_idx is derived from gfp_mask which is already show in this
      tracepoint.
      
      Regarding mm_vmscan_memcg_reclaim_begin,
      may_writepage is !laptop_mode too, and reclaim_idx is (MAX_NR_ZONES-1),
      which are both static value.
      
      mm_vmscan_memcg_softlimit_reclaim_begin is the same with
      mm_vmscan_memcg_reclaim_begin.
      
      So we can drop them all.
      
      Link: http://lkml.kernel.org/r/1553736322-32235-1-git-send-email-laoar.shao@gmail.comSigned-off-by: default avatarYafang Shao <laoar.shao@gmail.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3481c37f
    • Aneesh Kumar K.V's avatar
      mm: page_mkclean vs MADV_DONTNEED race · 024eee0e
      Aneesh Kumar K.V authored
      MADV_DONTNEED is handled with mmap_sem taken in read mode.  We call
      page_mkclean without holding mmap_sem.
      
      MADV_DONTNEED implies that pages in the region are unmapped and subsequent
      access to the pages in that range is handled as a new page fault.  This
      implies that if we don't have parallel access to the region when
      MADV_DONTNEED is run we expect those range to be unallocated.
      
      w.r.t page_mkclean() we need to make sure that we don't break the
      MADV_DONTNEED semantics.  MADV_DONTNEED check for pmd_none without holding
      pmd_lock.  This implies we skip the pmd if we temporarily mark pmd none.
      Avoid doing that while marking the page clean.
      
      Keep the sequence same for dax too even though we don't support
      MADV_DONTNEED for dax mapping
      
      The bug was noticed by code review and I didn't observe any failures w.r.t
      test run.  This is similar to
      
      commit 58ceeb6b
      Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Date:   Thu Apr 13 14:56:26 2017 -0700
      
          thp: fix MADV_DONTNEED vs. MADV_FREE race
      
      commit ced10803
      Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Date:   Thu Apr 13 14:56:20 2017 -0700
      
          thp: fix MADV_DONTNEED vs. numa balancing race
      
      Link: http://lkml.kernel.org/r/20190321040610.14226-1-aneesh.kumar@linux.ibm.comSigned-off-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
      Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc:"Kirill A . Shutemov" <kirill@shutemov.name>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      024eee0e
    • John Hubbard's avatar
      mm: introduce put_user_page*(), placeholder versions · fc1d8e7c
      John Hubbard authored
      A discussion of the overall problem is below.
      
      As mentioned in patch 0001, the steps are to fix the problem are:
      
      1) Provide put_user_page*() routines, intended to be used
         for releasing pages that were pinned via get_user_pages*().
      
      2) Convert all of the call sites for get_user_pages*(), to
         invoke put_user_page*(), instead of put_page(). This involves dozens of
         call sites, and will take some time.
      
      3) After (2) is complete, use get_user_pages*() and put_user_page*() to
         implement tracking of these pages. This tracking will be separate from
         the existing struct page refcounting.
      
      4) Use the tracking and identification of these pages, to implement
         special handling (especially in writeback paths) when the pages are
         backed by a filesystem.
      
      Overview
      ========
      
      Some kernel components (file systems, device drivers) need to access
      memory that is specified via process virtual address.  For a long time,
      the API to achieve that was get_user_pages ("GUP") and its variations.
      However, GUP has critical limitations that have been overlooked; in
      particular, GUP does not interact correctly with filesystems in all
      situations.  That means that file-backed memory + GUP is a recipe for
      potential problems, some of which have already occurred in the field.
      
      GUP was first introduced for Direct IO (O_DIRECT), allowing filesystem
      code to get the struct page behind a virtual address and to let storage
      hardware perform a direct copy to or from that page.  This is a
      short-lived access pattern, and as such, the window for a concurrent
      writeback of GUP'd page was small enough that there were not (we think)
      any reported problems.  Also, userspace was expected to understand and
      accept that Direct IO was not synchronized with memory-mapped access to
      that data, nor with any process address space changes such as munmap(),
      mremap(), etc.
      
      Over the years, more GUP uses have appeared (virtualization, device
      drivers, RDMA) that can keep the pages they get via GUP for a long period
      of time (seconds, minutes, hours, days, ...).  This long-term pinning
      makes an underlying design problem more obvious.
      
      In fact, there are a number of key problems inherent to GUP:
      
      Interactions with file systems
      ==============================
      
      File systems expect to be able to write back data, both to reclaim pages,
      and for data integrity.  Allowing other hardware (NICs, GPUs, etc) to gain
      write access to the file memory pages means that such hardware can dirty
      the pages, without the filesystem being aware.  This can, in some cases
      (depending on filesystem, filesystem options, block device, block device
      options, and other variables), lead to data corruption, and also to kernel
      bugs of the form:
      
          kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899!
          backtrace:
              ext4_writepage
              __writepage
              write_cache_pages
              ext4_writepages
              do_writepages
              __writeback_single_inode
              writeback_sb_inodes
              __writeback_inodes_wb
              wb_writeback
              wb_workfn
              process_one_work
              worker_thread
              kthread
              ret_from_fork
      
      ...which is due to the file system asserting that there are still buffer
      heads attached:
      
              ({                                                      \
                      BUG_ON(!PagePrivate(page));                     \
                      ((struct buffer_head *)page_private(page));     \
              })
      
      Dave Chinner's description of this is very clear:
      
          "The fundamental issue is that ->page_mkwrite must be called on every
          write access to a clean file backed page, not just the first one.
          How long the GUP reference lasts is irrelevant, if the page is clean
          and you need to dirty it, you must call ->page_mkwrite before it is
          marked writeable and dirtied. Every. Time."
      
      This is just one symptom of the larger design problem: real filesystems
      that actually write to a backing device, do not actually support
      get_user_pages() being called on their pages, and letting hardware write
      directly to those pages--even though that pattern has been going on since
      about 2005 or so.
      
      Long term GUP
      =============
      
      Long term GUP is an issue when FOLL_WRITE is specified to GUP (so, a
      writeable mapping is created), and the pages are file-backed.  That can
      lead to filesystem corruption.  What happens is that when a file-backed
      page is being written back, it is first mapped read-only in all of the CPU
      page tables; the file system then assumes that nobody can write to the
      page, and that the page content is therefore stable.  Unfortunately, the
      GUP callers generally do not monitor changes to the CPU pages tables; they
      instead assume that the following pattern is safe (it's not):
      
          get_user_pages()
      
          Hardware can keep a reference to those pages for a very long time,
          and write to it at any time.  Because "hardware" here means "devices
          that are not a CPU", this activity occurs without any interaction with
          the kernel's file system code.
      
          for each page
              set_page_dirty
              put_page()
      
      In fact, the GUP documentation even recommends that pattern.
      
      Anyway, the file system assumes that the page is stable (nothing is
      writing to the page), and that is a problem: stable page content is
      necessary for many filesystem actions during writeback, such as checksum,
      encryption, RAID striping, etc.  Furthermore, filesystem features like COW
      (copy on write) or snapshot also rely on being able to use a new page for
      as memory for that memory range inside the file.
      
      Corruption during write back is clearly possible here.  To solve that, one
      idea is to identify pages that have active GUP, so that we can use a
      bounce page to write stable data to the filesystem.  The filesystem would
      work on the bounce page, while any of the active GUP might write to the
      original page.  This would avoid the stable page violation problem, but
      note that it is only part of the overall solution, because other problems
      remain.
      
      Other filesystem features that need to replace the page with a new one can
      be inhibited for pages that are GUP-pinned.  This will, however, alter and
      limit some of those filesystem features.  The only fix for that would be
      to require GUP users to monitor and respond to CPU page table updates.
      Subsystems such as ODP and HMM do this, for example.  This aspect of the
      problem is still under discussion.
      
      Direct IO
      =========
      
      Direct IO can cause corruption, if userspace does Direct-IO that writes to
      a range of virtual addresses that are mmap'd to a file.  The pages written
      to are file-backed pages that can be under write back, while the Direct IO
      is taking place.  Here, Direct IO races with a write back: it calls GUP
      before page_mkclean() has replaced the CPU pte with a read-only entry.
      The race window is pretty small, which is probably why years have gone by
      before we noticed this problem: Direct IO is generally very quick, and
      tends to finish up before the filesystem gets around to do anything with
      the page contents.  However, it's still a real problem.  The solution is
      to never let GUP return pages that are under write back, but instead,
      force GUP to take a write fault on those pages.  That way, GUP will
      properly synchronize with the active write back.  This does not change the
      required GUP behavior, it just avoids that race.
      
      Details
      =======
      
      Introduces put_user_page(), which simply calls put_page().  This provides
      a way to update all get_user_pages*() callers, so that they call
      put_user_page(), instead of put_page().
      
      Also introduces put_user_pages(), and a few dirty/locked variations, as a
      replacement for release_pages(), and also as a replacement for open-coded
      loops that release multiple pages.  These may be used for subsequent
      performance improvements, via batching of pages to be released.
      
      This is the first step of fixing a problem (also described in [1] and [2])
      with interactions between get_user_pages ("gup") and filesystems.
      
      Problem description: let's start with a bug report.  Below, is what
      happens sometimes, under memory pressure, when a driver pins some pages
      via gup, and then marks those pages dirty, and releases them.  Note that
      the gup documentation actually recommends that pattern.  The problem is
      that the filesystem may do a writeback while the pages were gup-pinned,
      and then the filesystem believes that the pages are clean.  So, when the
      driver later marks the pages as dirty, that conflicts with the
      filesystem's page tracking and results in a BUG(), like this one that I
      experienced:
      
          kernel BUG at /build/linux-fQ94TU/linux-4.4.0/fs/ext4/inode.c:1899!
          backtrace:
              ext4_writepage
              __writepage
              write_cache_pages
              ext4_writepages
              do_writepages
              __writeback_single_inode
              writeback_sb_inodes
              __writeback_inodes_wb
              wb_writeback
              wb_workfn
              process_one_work
              worker_thread
              kthread
              ret_from_fork
      
      ...which is due to the file system asserting that there are still buffer
      heads attached:
      
              ({                                                      \
                      BUG_ON(!PagePrivate(page));                     \
                      ((struct buffer_head *)page_private(page));     \
              })
      
      Dave Chinner's description of this is very clear:
      
          "The fundamental issue is that ->page_mkwrite must be called on
          every write access to a clean file backed page, not just the first
          one.  How long the GUP reference lasts is irrelevant, if the page is
          clean and you need to dirty it, you must call ->page_mkwrite before it
          is marked writeable and dirtied.  Every.  Time."
      
      This is just one symptom of the larger design problem: real filesystems
      that actually write to a backing device, do not actually support
      get_user_pages() being called on their pages, and letting hardware write
      directly to those pages--even though that pattern has been going on since
      about 2005 or so.
      
      The steps are to fix it are:
      
      1) (This patch): provide put_user_page*() routines, intended to be used
         for releasing pages that were pinned via get_user_pages*().
      
      2) Convert all of the call sites for get_user_pages*(), to
         invoke put_user_page*(), instead of put_page(). This involves dozens of
         call sites, and will take some time.
      
      3) After (2) is complete, use get_user_pages*() and put_user_page*() to
         implement tracking of these pages. This tracking will be separate from
         the existing struct page refcounting.
      
      4) Use the tracking and identification of these pages, to implement
         special handling (especially in writeback paths) when the pages are
         backed by a filesystem.
      
      [1] https://lwn.net/Articles/774411/ : "DMA and get_user_pages()"
      [2] https://lwn.net/Articles/753027/ : "The Trouble with get_user_pages()"
      
      Link: http://lkml.kernel.org/r/20190327023632.13307-2-jhubbard@nvidia.comSigned-off-by: default avatarJohn Hubbard <jhubbard@nvidia.com>
      Reviewed-by: default avatarJan Kara <jack@suse.cz>
      Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>		[docs]
      Reviewed-by: default avatarIra Weiny <ira.weiny@intel.com>
      Reviewed-by: default avatarJérôme Glisse <jglisse@redhat.com>
      Reviewed-by: default avatarChristoph Lameter <cl@linux.com>
      Tested-by: default avatarIra Weiny <ira.weiny@intel.com>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: Christoph Hellwig <hch@infradead.org>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Dave Chinner <david@fromorbit.com>
      Cc: Jason Gunthorpe <jgg@ziepe.ca>
      Cc: Matthew Wilcox <willy@infradead.org>
      Cc: Michal Hocko <mhocko@kernel.org>
      Cc: Ralph Campbell <rcampbell@nvidia.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      fc1d8e7c
    • Alexandre Ghiti's avatar
      hugetlb: allow to free gigantic pages regardless of the configuration · 4eb0716e
      Alexandre Ghiti authored
      On systems without CONTIG_ALLOC activated but that support gigantic pages,
      boottime reserved gigantic pages can not be freed at all.  This patch
      simply enables the possibility to hand back those pages to memory
      allocator.
      
      Link: http://lkml.kernel.org/r/20190327063626.18421-5-alex@ghiti.frSigned-off-by: default avatarAlexandre Ghiti <alex@ghiti.fr>
      Acked-by: David S. Miller <davem@davemloft.net> [sparc]
      Reviewed-by: default avatarMike Kravetz <mike.kravetz@oracle.com>
      Cc: Andy Lutomirsky <luto@kernel.org>
      Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Dave Hansen <dave.hansen@linux.intel.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: "H . Peter Anvin" <hpa@zytor.com>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Rich Felker <dalias@libc.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Vlastimil Babka <vbabka@suse.cz>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4eb0716e
    • Alexandre Ghiti's avatar
      mm: simplify MEMORY_ISOLATION && COMPACTION || CMA into CONTIG_ALLOC · 8df995f6
      Alexandre Ghiti authored
      This condition allows to define alloc_contig_range, so simplify it into a
      more accurate naming.
      
      Link: http://lkml.kernel.org/r/20190327063626.18421-4-alex@ghiti.frSigned-off-by: default avatarAlexandre Ghiti <alex@ghiti.fr>
      Suggested-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Acked-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Cc: Andy Lutomirsky <luto@kernel.org>
      Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Dave Hansen <dave.hansen@linux.intel.com>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: "H . Peter Anvin" <hpa@zytor.com>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Mike Kravetz <mike.kravetz@oracle.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Rich Felker <dalias@libc.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8df995f6
    • Alexandre Ghiti's avatar
      sparc: advertise gigantic page support · b53f4569
      Alexandre Ghiti authored
      sparc actually supports gigantic pages and selecting
      ARCH_HAS_GIGANTIC_PAGE allows it to allocate and free gigantic pages at
      runtime.
      
      sparc allows configuration such as huge pages of 16GB, pages of 8KB and
      MAX_ORDER = 13 (default): HPAGE_SHIFT (34) - PAGE_SHIFT (13) = 21 >=
      MAX_ORDER (13)
      
      Link: http://lkml.kernel.org/r/20190327063626.18421-3-alex@ghiti.frSigned-off-by: default avatarAlexandre Ghiti <alex@ghiti.fr>
      Acked-by: default avatarDavid S. Miller <davem@davemloft.net>
      Cc: Andy Lutomirsky <luto@kernel.org>
      Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Dave Hansen <dave.hansen@linux.intel.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: "H . Peter Anvin" <hpa@zytor.com>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Mike Kravetz <mike.kravetz@oracle.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Rich Felker <dalias@libc.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Vlastimil Babka <vbabka@suse.cz>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b53f4569
    • Alexandre Ghiti's avatar
      sh: advertise gigantic page support · a861bbce
      Alexandre Ghiti authored
      Patch series "Fix free/allocation of runtime gigantic pages", v8.
      
      This series fixes sh and sparc that did not advertise their gigantic page
      support and then were not able to allocate and free those pages at
      runtime.  It renames MEMORY_ISOLATION && COMPACTION || CMA condition into
      the more accurate CONTIG_ALLOC, since it allows the definition of
      alloc_contig_range function.
      
      Finally, it then fixes the wrong definition of ARCH_HAS_GIGANTIC_PAGE
      config that, without MEMORY_ISOLATION && COMPACTION || CMA defined, did
      not allow architectures to free boottime allocated gigantic pages although
      unrelated.
      
      This patch (of 4):
      
      sh actually supports gigantic pages and selecting ARCH_HAS_GIGANTIC_PAGE
      allows it to allocate and free gigantic pages at runtime.
      
      At least sdk7786_defconfig exposes such a configuration with huge pages of
      64MB, pages of 4KB and MAX_ORDER = 11: HPAGE_SHIFT (26) - PAGE_SHIFT (12)
      = 14 >= MAX_ORDER (11)
      
      Link: http://lkml.kernel.org/r/20190327063626.18421-2-alex@ghiti.frSigned-off-by: default avatarAlexandre Ghiti <alex@ghiti.fr>
      Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Vlastimil Babka <vbabka@suse.cz>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Cc: Rich Felker <dalias@libc.org>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: "H . Peter Anvin" <hpa@zytor.com>
      Cc: Dave Hansen <dave.hansen@linux.intel.com>
      Cc: Andy Lutomirsky <luto@kernel.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Mike Kravetz <mike.kravetz@oracle.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a861bbce
    • Mike Rapoport's avatar
      riscv: switch over to generic free_initmem() · 0d7b4a60
      Mike Rapoport authored
      The riscv version of free_initmem() differs from the generic one only in
      that it sets the freed memory to zero.
      
      Make ricsv use the generic version and poison the freed memory.
      
      Link: http://lkml.kernel.org/r/1550515285-17446-5-git-send-email-rppt@linux.ibm.comSigned-off-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Reviewed-by: default avatarPalmer Dabbelt <palmer@sifive.com>
      Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Richard Kuo <rkuo@codeaurora.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0d7b4a60
    • Mike Rapoport's avatar
      init: free_initmem: poison freed init memory · f4039999
      Mike Rapoport authored
      Various architectures including x86 poison the freed init memory.  Do the
      same in the generic free_initmem implementation and switch sparc32
      architecture that is identical to the generic code over to it now.
      
      Link: http://lkml.kernel.org/r/1550515285-17446-4-git-send-email-rppt@linux.ibm.comSigned-off-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Palmer Dabbelt <palmer@sifive.com>
      Cc: Richard Kuo <rkuo@codeaurora.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f4039999
    • Mike Rapoport's avatar
      hexagon: switch over to generic free_initmem() · 522c9919
      Mike Rapoport authored
      hexagon implementation of free_initmem() is currently empty and marked
      with comment
      
       * Todo:  free pages between __init_begin and __init_end; possibly
       * some devtree related stuff as well.
      
      Switch it to the generic implementation.
      
      Link: http://lkml.kernel.org/r/1550515285-17446-3-git-send-email-rppt@linux.ibm.comSigned-off-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Palmer Dabbelt <palmer@sifive.com>
      Cc: Richard Kuo <rkuo@codeaurora.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      522c9919
    • Mike Rapoport's avatar
      init: provide a generic free_initmem implementation · 997aef68
      Mike Rapoport authored
      Patch series "provide a generic free_initmem implementation", v2.
      
      Many architectures implement free_initmem() in exactly the same or very
      similar way: they wrap the call to free_initmem_default() with sometimes
      different 'poison' parameter.
      
      These patches switch those architectures to use a generic implementation
      that does free_initmem_default(POISON_FREE_INITMEM).
      
      This was inspired by Christoph's patches for free_initrd_mem [1] and I
      shamelessly copied changelog entries from his patches :)
      
      [1] https://lore.kernel.org/lkml/20190213174621.29297-1-hch@lst.de/
      
      This patch (of 2):
      
      For most architectures free_initmem just a wrapper for the same
      free_initmem_default(-1) call.  Provide that as a generic implementation
      marked __weak.
      
      Link: http://lkml.kernel.org/r/1550515285-17446-2-git-send-email-rppt@linux.ibm.comSigned-off-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: Palmer Dabbelt <palmer@sifive.com>
      Cc: Richard Kuo <rkuo@codeaurora.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      997aef68
    • Christoph Hellwig's avatar
      initramfs: poison freed initrd memory · f94f7434
      Christoph Hellwig authored
      Various architectures including x86 poison the freed initrd memory.  Do
      the same in the generic free_initrd_mem implementation and switch a few
      more architectures that are identical to the generic code over to it now.
      
      Link: http://lkml.kernel.org/r/20190213174621.29297-9-hch@lst.deSigned-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Acked-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Cc: Catalin Marinas <catalin.marinas@arm.com>	[arm64]
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
      Cc: Steven Price <steven.price@arm.com>
      Cc: Alexander Viro <viro@zeniv.linux.org.uk>
      Cc: Guan Xuetao <gxt@pku.edu.cn>
      Cc: Russell King <linux@armlinux.org.uk>
      Cc: Will Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f94f7434
    • Christoph Hellwig's avatar
      initramfs: provide a generic free_initrd_mem implementation · 4afd58e1
      Christoph Hellwig authored
      For most architectures free_initrd_mem just expands to the same
      free_reserved_area call.  Provide that as a generic implementation marked
      __weak.
      
      Link: http://lkml.kernel.org/r/20190213174621.29297-8-hch@lst.deSigned-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
      Acked-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Cc: Catalin Marinas <catalin.marinas@arm.com>	[arm64]
      Cc: Steven Price <steven.price@arm.com>
      Cc: Alexander Viro <viro@zeniv.linux.org.uk>
      Cc: Guan Xuetao <gxt@pku.edu.cn>
      Cc: Russell King <linux@armlinux.org.uk>
      Cc: Will Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4afd58e1
    • Christoph Hellwig's avatar
      initramfs: move the legacy keepinitrd parameter to core code · d8ae8a37
      Christoph Hellwig authored
      No need to handle the freeing disable in arch code when we already have a
      core hook (and a different name for the option) for it.
      
      Link: http://lkml.kernel.org/r/20190213174621.29297-7-hch@lst.deSigned-off-by: default avatarChristoph Hellwig <hch@lst.de>
      Acked-by: Catalin Marinas <catalin.marinas@arm.com>	[arm64]
      Acked-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
      Cc: Steven Price <steven.price@arm.com>
      Cc: Alexander Viro <viro@zeniv.linux.org.uk>
      Cc: Guan Xuetao <gxt@pku.edu.cn>
      Cc: Russell King <linux@armlinux.org.uk>
      Cc: Will Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d8ae8a37