- 12 Oct, 2007 40 commits
-
-
Matthew Wilcox authored
We were releasing the block devices before removing the host, so commands could still be coming in which would cause a panic. Just remove the host before releasing the block devices to close this race. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
There was a missing call to scsi_host_put() causing us to leak a scsi host every time this module was unloaded. Signed-off-by:
-
Matthew Wilcox authored
If kthread_run failed, we would fail to scan the host, and leak the allocated async_scan_data. Since using a separate thread is just an optimisation, do the scan synchronously if we fail to spawn a thread. Signed-off-by:
-
Matthew Wilcox authored
The current code prints: scsi 13:0:4:0: scsi: Device offlined - not ready after error recovery which is repetitively redundant. This patch changes that message to: scsi 6:0:6:0: Device offlined - not ready after error recovery Signed-off-by:
-
James Bottomley authored
sg uses a scheme to reallocate a single contiguous array of all its pointers for lookup and management. This didn't matter too much when sg could only attach 256 nodes, but now the maximum has been bumped up to 32k we're starting to push the limits of the maximum allocatable contiguous memory. The solution to this is to eliminate the static array and do everything via idr, which this patch does. Acked-by:
Douglas Gilbert <dougg@torque.net> Signed-off-by:
-
Matthias Kaehlcke authored
The OnStream SCSI Tape driver uses a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Reviewed-by:
Satyam Sharma <satyam@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Willem Riede <wrlk@riede.org> Signed-off-by:
-
Jeff Garzik authored
* Remove IRQF_DISABLED, it is clearly wrong for this driver. * Remove wasteful spin_lock_irqsave() in interrupt handler. The lighter-weight spin_lock() is all that's needed. * Annotate with FIXME where arcmsr_interrupt() is called without any spinlock being acquired. * Eliminate pointless cast from void pointer in arcmsr_do_interrupt() [jejb: conflict resolution] Signed-off-by:
Jeff Garzik <jeff@garzik.org> Acked-by:
Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by:
-
Jeff Garzik authored
Remove _interruptible, since receiving a signal while waiting on a hardware condition will simply cause the driver to busy-wait. Using msleep_interruptible() is rarely the right thing to do, when waiting on a hardware condition to change. Also, replace msleep with ssleep while doing this, where appropriate. [jejb: fix up merge conflict] Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Do not adjust the iIDMA speed on ports which have a faster link-speed than the HBA itself. Signed-off-by:
-
Andrew Vasquez authored
Since MSI-X vectors do not require a clearing "handshake" from the system perspective, and the registered handler will not be called more than once for one occurrence of receipt of a vector, there is no requirement to flush the risc register write clearing the interrupt condition in the risc. Also, since the msi-x registered handlers are optimised for a particular vector, it is preferable to handle the one vector received per invocation of the handler. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Make several needlessly global functions static: - qla2x00_mark_vp_devices_dead() - qla24xx_configure_vp() Remove unused function qla24xx_modify_vport(). Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
Drop usage of legacy to_qla_host() macro. Signed-off-by:
-
Andrew Vasquez authored
This change reduces by as much as 16% the memory footprint for each allocated sbr_t structure requested from the mempool. Signed-off-by:
-
Seokmann Ju authored
Signed-off-by:
-
Andrew Vasquez authored
Original code, incorrectly passed the address-of a pointer rather than the pointer value itself. Signed-off-by:
-
Andrew Vasquez authored
Also remove legacy '/proc' name during OS_DEVICE_NAME registration. Signed-off-by:
-
Ravi Anand authored
Where the DPC logic would get jammed into continuously reloging-into a port. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Andrew Vasquez authored
There's no need to reset the RISC prior to pausing. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Seokmann Ju authored
Additional cleanups and Signed-off-by:
-
Joe Carnuccio authored
Additional cleanups and Signed-off-by:
-
Andrew Vasquez authored
Newer ISPs support a mechanism to read and write flash-memory via the firmware LOAD/DUMP memory mailbox command routines. When supported, utilizing these mechanisms significantly reduces overall access times. Signed-off-by:
-
Andrew Vasquez authored
Add IO-base-window accessor functions. Merge duplicate RISC-pause and soft-reset code segments. Drop 'eye-watering' __iomem casting. Signed-off-by:
-
James Bottomley authored
One of the intents of the block prep function was to allow ULDs to use it for preprocessing. The original SCSI model was to have a single prep function and add a pointer indirect filter to build the necessary commands. This patch reverses that, does away with the init_command field of the scsi_driver structure and makes ULDs attach directly to the prep function instead. The value is really that it allows us to begin to separate the ULDs from the SCSI mid layer (as long as they don't use any core functions---which is hard at the moment---a ULD doesn't even need SCSI to bind). Acked-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
David Woodhouse authored
If you build a multiplatform kernel for iSeries and pSeries, with ibmvscsic support, the resulting client doesn't work on iSeries. This fixes that, using the appropriate low-level operations for the machine detected at runtime. [jejb: fixed up rejections around the srp transport patch] Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Acked by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Alan Cox authored
(and pointed out by several people) Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Alan Cox authored
So its ancient, its crap, but it kept showing up in my scans for stuff that wanted fixing... - Redo the proc code to be far cleaner - Clean various return (0) type constructs - Use cpu_relax() The various waits ought to time out but thats another issue and probably not worth solving. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by:
-
Masatake YAMATO authored
In scsi module I've found some inconsistency between variable type used in module_param_named and type passed to module_param_named as an argument. Especially the inconsistency of `max_scsi_luns' parameter is a bit serious because the description text says "last scsi LUN (should be between 1 and 2^32-1)". Signed-off-by:
Masatake YAMATO <jet@gyve.org> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Boaz Harrosh authored
- Convert ide-scsi to the new data accessors and cleanup the !use_sg code paths. In old code the driver was trying to translate narrow commands, if received, to wide commands. This code path still assumed scsi_cmnd->request_buffer is a linear char pointer. This means that this driver was broken since 2.6.17. As suggested by Christoph Hellwig I set use_10_for_rw = 1; and use_10_for_ms = 1; for this device and completely killed the translation. Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Acked-by:
-
Michael Reed authored
A BUSY status returned on a write request results in a stale residual being returned when the write ultimately successfully completes. This can be reproduced as follows: 1) issue immediate mode rewind to scsi tape drive 2) issue write request The tape drive returns busy. The low level driver detects underrun and sets the residual into the scsi command. The low level driver responds with (DID_OK << 16) | scsi_status. scsi_status is 8, hence status_byte(result) == 4, i.e., BUSY. scsi_softirq_done() calls scsi_decide_disposition() which returns ADD_TO_MLQUEUE. scsi_softirq_done() then calls scsi_queue_insert() which, on the way to resubmitting the request to the driver, calls scsi_init_cmd_errh(). The attached patch modifies scsi_init_cmd_errh() to clear the resid field. This prevents a "stale" residual from being returned when the scsi command finally completes without a BUSY status. Signed-off-by:
Michael Reed <mdr@sgi.com> Signed-off-by:
-
Eric Moore authored
Mailing list changed. The former list at mpt_linux_developer@lsi.com is no longer in service. Please use the new email provided listed in this patch. Signed-off-by:
Eric Moore <Eric.Moore@lsi.com> Signed-off-by:
-
Eric Moore authored
bump version Signed-off-by:
-
Eric Moore authored
Adding 949X, 949E, and 1078 to Kconfig. Adding "depends on FUSION" required in the FUSION_LOGGING section, and fixing a spelling error. Signed-off-by:
-
Eric Moore authored
Some other vender has concerns over this copyright, and Dell has approved removing it. Signed-off-by:
-
Eric Moore authored
Cleaning up code by accesing the ioc pointer directly instead of via hd->ioc. In the future, most data members of struct MPT_SCSI_HOST will be either deleted or moved to struct MPT_ADAPTER. Signed-off-by:
-
