- 17 Jul, 2014 40 commits
-
-
Laurent Pinchart authored
Several macros were mistakenly prefixed with VPS1 instead of VSP1. Fix them. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
If the pipeline was already stopped when stopping the stream, no frame end interrupt will be generated and the driver will time out waiting for the pipeline to stop. Fix this by setting the pipeline state to STOPPED when the pipeline is idle waiting for frames to process, and to STOPPING at stream stop time only when the pipeline is currently RUNNING. Signed-off-by:
-
Laurent Pinchart authored
videobuf2 expects no buffer to be owned by the driver when the stop_stream queue operation returns. As the vsp1 driver fails to do so, a warning is generated at stream top time. Fix this by releasing all buffers queued on the IRQ queue in the stop_stream operation handler and marking them as erroneous. Signed-off-by:
-
Laurent Pinchart authored
Commit d9b45ed3 ("v4l: vsp1: Support multi-input entities") reworked pipeline routing configuration and introduced a bug by writing to the entities routing registers without first checking whether the entity had a routing register. This results in overwriting the value at offset 0 of the device register space when stopping the stream. Fix this by skipping routing register write for entities without a routing register. Signed-off-by:
-
Laurent Pinchart authored
videobuf2 stores the driver streaming state internally in the queue in the start_streaming_called variable. The state is set right after the driver start_stream operation returns, and checked in the vb2_buffer_done() function, typically called from the frame completion interrupt handler. A race condition exists if the hardware finishes processing the first frame before the start_stream operation returns. Fix this by setting start_streaming_called to 1 before calling the start_stream operation, and resetting it to 0 if the operation fails. Cc: stable@vger.kernel.org # for v3.15 and up Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Laurent Pinchart authored
When set, the new V4L2_PIX_FMT_FLAG_PREMUL_ALPHA flag indicates that the pixel values are premultiplied by the alpha channel value. Signed-off-by:
-
Laurent Pinchart authored
The v4l2_pix_format structure has no reserved field. It is embedded in the v4l2_framebuffer structure which has no reserved fields either, and in the v4l2_format structure which has reserved fields that were not previously required to be zeroed out by applications. To allow extending v4l2_pix_format, inline it in the v4l2_framebuffer structure, and use the priv field as a magic value to indicate that the application has set all v4l2_pix_format extended fields and zeroed all reserved fields following the v4l2_pix_format field in the v4l2_format structure. The availability of this API extension is reported to userspace through the new V4L2_CAP_EXT_PIX_FORMAT capability flag. Just checking that the priv field is still set to the magic value at [GS]_FMT return wouldn't be enough, as older kernels don't zero the priv field on return. To simplify the internal API towards drivers zero the extended fields and set the priv field to the magic value for applications not aware of the extensions. Signed-off-by:
-
Laurent Pinchart authored
Extend the V4L2_CID_ALPHA_COMPONENT control for use on output devices, to set the alpha component value when the output format doesn't have an alpha channel. Signed-off-by:
-
Laurent Pinchart authored
The existing RGB pixel formats are ill-defined in respect to their alpha bits and their meaning is driver dependent. Create new standard ARGB and XRGB variants with clearly defined meanings and make the existing variants deprecated. The new pixel formats 4CC values have been selected to match the DRM 4CCs for the same in-memory formats. Signed-off-by:
-
Hans Verkuil authored
Commit 0ba2aeb6 increased the internal control ranges to 64 bit, but that caused problems in drivers that use the minimum/maximum/step/default_value control values in a division or modulus operations since not all architectures support those natively. Luckily, in almost all cases it is possible to just cast to 32 bits (the control value is known to be 32 bits, so it is safe to cast). Only in v4l2-ctrls.c was it necessary to use do_div in one function. Signed-off-by:
-
Hans Verkuil authored
Removed the "This type is only used-in array controls." sentence in DocBook which was thought to only confuse. Signed-off-by:
-
Hans Verkuil authored
This patch adds motion detection support to the go7007 driver using the new motion detection controls, events. The global motion detection works fine, but the regional motion detection support probably needs more work. There seems to be some interaction between regions that makes setting correct thresholds difficult. The exact meaning of the thresholds isn't entirely clear either. I do not have any documentation, the only information I have is the custom code in the driver and a modet.c application. Signed-off-by:
-
Hans Verkuil authored
The dma_map_sg() function can fail, so check for the return value. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Use the new motion detection event. Signed-off-by:
-
Hans Verkuil authored
Replace the custom ioctls to set motion detection thresholds by standard matrix controls. Signed-off-by:
-
Hans Verkuil authored
Document the new motion detection event. Signed-off-by:
-
Hans Verkuil authored
Add a new MOTION_DET event to signal when motion is detected. Signed-off-by:
-
Hans Verkuil authored
Document the 'Detect' control class and the new Motion Detection controls. Those controls will be used by the solo6x10 and go7007 drivers. Signed-off-by:
-
Hans Verkuil authored
Add the 'Detect' control class and the new motion detection controls. Those controls will be used by the solo6x10 and go7007 drivers. Signed-off-by:
-
Hans Verkuil authored
Various comments referred to videodev2.h, but the control definitions have been moved to v4l2-controls.h. Also add the same reminder message to each class of controls. Signed-off-by:
-
Hans Verkuil authored
These types are needed for the upcoming Motion Detection matrix controls, so document them. Signed-off-by:
-
Hans Verkuil authored
These are needed by the upcoming patches for the motion detection matrices. Signed-off-by:
-
Hans Verkuil authored
The way current and new values are accessed has changed. Update the document to bring it up to date with the code. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Hans Verkuil authored
Document the support for compound types in controls. Signed-off-by:
-
Hans Verkuil authored
Improve the control section: - Clarify the handling of private controls - Explain the V4L2_CTRL_FLAG_INACTIVE flag - Remove obsolete text regarding missing control event (we have them today) and the incorrect V4L2_CTRL_FLAG_DISABLED reference. - Add a code example on how to enumerate over user controls. Signed-off-by:
-
Hans Verkuil authored
Use the proper kernel coding style in these examples. Signed-off-by:
-
Hans Verkuil authored
Document the support for the new compound type controls. Signed-off-by:
-
Hans Verkuil authored
Document the new VIDIOC_QUERY_EXT_CTRL ioctl. Signed-off-by:
-
Hans Verkuil authored
copy_to/from_user returns the number of bytes not copied, it does not return a 'normal' linux error code. Signed-off-by:
-
Hans Verkuil authored
When getting a string and the size given by the application is too short return the max length the string can have (elem_size) instead of the string length + 1. That makes more sense. Signed-off-by:
-
Hans Verkuil authored
Finish the userspace-facing array support. Signed-off-by:
-
Hans Verkuil authored
Extend the control type operations to handle N-dimensional array elements. Signed-off-by:
-
Hans Verkuil authored
Add core support for N-dimensional arrays. Signed-off-by:
-
Hans Verkuil authored
Add dims, nr_of_dims and elems fields to the core control structures in preparation for N-dimensional array support. Signed-off-by:
-
Hans Verkuil authored
Rather than having two unions for all types just keep 'val' and 'cur.val' and use the p_cur and p_new unions to access all others. The only reason for keeping 'val' and 'cur.val' is that it is used all over, so converting this as well would be a huge job. Signed-off-by:
-
Hans Verkuil authored
When setting a control the control's new value is compared to the current value twice: once by new_to_cur(), once by cluster_changed(). Not a big deal when dealing with simple values, but it can be a problem when dealing with compound types or arrays. So fix this: cluster_changed() sets the has_changed flag, which is used by new_to_cur() instead of having to do another compare. Signed-off-by:
-
Hans Verkuil authored
In order to implement array support and (for the future) configuration stores we need to have more generic copy routines that all operate on the v4l2_ctrl_ptr union. So instead of e.g. using ctrl->cur.string it uses ptr.p_char. This makes e.g. cur_to_user generic so it can be used to copy any v4l2_ctrl_ptr value to userspace, not just the (hardcoded) current value. Signed-off-by:
-
Hans Verkuil authored
Since compound controls can have non-standard types we need to be able to do type-specific checks etc. In order to make that easy type operations are added. There are four operations: - equal: check if two values are equal - init: initialize a value - log: log the value - validate: validate a new value The v4l2_ctrl struct adds p_new and p_cur unions at the end of the struct. This union provides a standard way of accessing control types through a pointer, which greatly simplifies internal control processing. Signed-off-by:
-
Hans Verkuil authored
Add the v4l2 core plumbing for the new VIDIOC_QUERY_EXT_CTRL ioctl. Signed-off-by:
-
