- 04 Oct, 2006 40 commits
-
-
Vitaly Wool authored
This patch fixes the compilation errors on PNX8550 and hard-to-track bug in interrupt handling. It also corresponds to the latest changes in PNX8550 serial driver. Signed-off-by:
Vitaly Wool <vitalywool@gmail.com> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6: (292 commits) [GFS2] Fix endian bug for de_type [GFS2] Initialize SELinux extended attributes at inode creation time. [GFS2] Move logging code into log.c (mostly) [GFS2] Mark nlink cleared so VFS sees it happen [GFS2] Two redundant casts removed [GFS2] Remove uneeded endian conversion [GFS2] Remove duplicate sb reading code [GFS2] Mark metadata reads for blktrace [GFS2] Remove iflags.h, use FS_ [GFS2] Fix code style/indent in ops_file.c [GFS2] streamline-generic_file_-interfaces-and-filemap gfs fix [GFS2] Remove readv/writev methods and use aio_read/aio_write instead (gfs bits) [GFS2] inode-diet: Eliminate i_blksize from the inode structure [GFS2] inode_diet: Replace inode.u.generic_ip with inode.i_private (gfs) [GFS2] Fix typo in last patch [GFS2] Fix direct i/o logic in filemap.c [GFS2] Fix bug in Makefiles for lock modules [GFS2] Remove (extra) fs_subsys declaration [GFS2/DLM] Fix trailing whitespace [GFS2] Tidy up meta_io code ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [XFRM]: BEET mode [TCP]: Kill warning in tcp_clean_rtx_queue(). [NET_SCHED]: Remove old estimator implementation [ATM]: [zatm] always *pcr in alloc_shaper() [ATM]: [ambassador] Change the return type to reflect reality [ATM]: kmalloc to kzalloc patches for drivers/atm [TIPC]: fix printk warning [XFRM]: Clearing xfrm_policy_count[] to zero during flush is incorrect. [XFRM] STATE: Use destination address for src hash. [NEIGH]: always use hash_mask under tbl lock [UDP]: Fix MSG_PROBE crash [UDP6]: Fix flowi clobbering [NET_SCHED]: Revert "HTB: fix incorrect use of RB_EMPTY_NODE" [NETFILTER]: ebt_mark: add or/and/xor action support to mark target [NETFILTER]: ipt_REJECT: remove largely duplicate route_reverse function [NETFILTER]: Honour source routing for LVS-NAT [NETFILTER]: add type parameter to ip_route_me_harder [NETFILTER]: Kconfig: fix xt_physdev dependencies
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/willy/parisc-2.6: (41 commits) [PARISC] Kill wall_jiffies use [PARISC] Honour "panic_on_oops" sysctl [PARISC] Fix fs/binfmt_som.c [PARISC] Export clear_user_page to modules [PARISC] Make DMA routines more stubby [PARISC] Define pci_get_legacy_ide_irq [PARISC] Fix CONFIG_DEBUG_SPINLOCK [PARISC] Fix HPUX compat compile with current GCC [PARISC] Fix iounmap compile warning [PARISC] Add support for Quicksilver AGPGART [PARISC] Move LBA and SBA register defines to the common ropes.h [PARISC] Create shared <asm/ropes.h> header [PARISC] Stash the lba_device in its struct device drvdata [PARISC] Generalize IS_ASTRO et al to take a parisc_device like [PARISC] Pretty print the name of the lba type on kernel boot [PARISC] Remove some obsolete comments and I checked that Reo is similar to Ike [PARISC] Add hardware found in the rp8400 [PARISC] Allow nested interrupts [PARISC] Further updates to timer_interrupt() [PARISC] remove halftick and copy clocktick to local var (gcc can optimize usage) ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (25 commits) [POWERPC] Add support for the mpc832x mds board [POWERPC] Add initial support for the e300c2 core [POWERPC] Add MPC8360EMDS default dts file [POWERPC] Add MPC8360EMDS board support [POWERPC] Add QUICC Engine (QE) infrastructure [POWERPC] Add QE device tree node definition [POWERPC] Don't try to just continue if xmon has no input device [POWERPC] Fix a printk in pseries_mpic_init_IRQ [POWERPC] Get default baud rate in udbg_scc [POWERPC] Fix zImage.coff on oldworld PowerMac [POWERPC] Fix xmon=off and cleanup xmon initialisation [POWERPC] Cleanup include/asm-powerpc/xmon.h [POWERPC] Update swim3 printk after blkdev.h change [POWERPC] Cell interrupt rework POWERPC: mpc82xx merge: board-specific/platform stuff(resend) POWERPC: 8272ads merge to powerpc: common stuff POWERPC: Added devicetree for mpc8272ads board [POWERPC] iSeries has no legacy I/O [POWERPC] implement BEGIN/END_FW_FTR_SECTION [POWERPC] iSeries does not need pcibios_fixup_resources ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-currentLinus Torvalds authored
* 'audit.b32' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: [PATCH] message types updated [PATCH] name_count array overrun [PATCH] PPID filtering fix [PATCH] arch filter lists with < or > should not be accepted
-
Alan Cox authored
This fixes support for rev c8 of the ALi/ULi PATA, and keeps pcmcia in sync so ide_cs and pata_pcmcia are interchangable, both are only changes to constants. Right now rev 0xC8 and higher don't work with libata but 0xc8 is in the field now. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jeff Garzik authored
Fix obvious build breakage revealed by 'make allyesconfig' in current -git. Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] pata_artop: kill gcc warning [PATCH] libata: turn off NCQ if queue depth is adjusted to 1 [PATCH] libata: cosmetic changes to constants [libata] DocBook minor updates, fixes [libata] PCI ID table cleanup in various drivers [libata] Print out Status register, if a BSY-sleep takes too long [libata] init probe_ent->private_data in a common location [libata] minor PCI IDE probe fixes and cleanups [libata] Use new PCI_VDEVICE() macro to dramatically shorten ID lists [PATCH] Fix reference of uninitialised memory in ata_device_add()
-
Andrew Morton authored
If you lose the x bit (eg: by using patch(1)), powerpc won't build. Be defensive about it... Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Adrian Bunk authored
Move all EXPORT_SYMBOL's from sound/oss/*_syms.c to the files with the actual functions. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Adrian Bunk authored
This patch contains the scheduled removal of OSS drivers that: - have ALSA drivers for the same hardware without known regressions and - whose Kconfig options have been removed in 2.6.17. [michal.k.k.piotrowski@gmail.com: build fix] Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Josh Triplett authored
Add MAINTAINERS entry for Read-Copy Update (RCU), listing Dipankar Sarma as maintainer, and giving the URL for Paul McKenney's RCU site. Add MAINTAINERS entry for rcutorture, listing myself as maintainer. Add CREDITS entries for developers of RCU, RCU variants, and rcutorture. Use Paul McKenney's preferred email address in include/linux/rcupdate.h . Signed-off-by:
Josh Triplett <josh@freedesktop.org> Cc: Paul McKenney <paulmck@us.ibm.com> Cc: Dipankar Sarma <dipankar@in.ibm.com> Signed-off-by:
-
Oleg Nesterov authored
Kill a hard-to-calculate 'rsinterval' boot parameter and per-cpu rcu_data.last_rs_qlen. Instead, it adds adds a flag rcu_ctrlblk.signaled, which records the fact that one of CPUs has sent a resched IPI since the last rcu_start_batch(). Roughly speaking, we need two rcu_start_batch()s in order to move callbacks from ->nxtlist to ->donelist. This means that when ->qlen exceeds qhimark and continues to grow, we should send a resched IPI, and then do it again after we gone through a quiescent state. On the other hand, if it was already sent, we don't need to do it again when another CPU detects overflow of the queue. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Acked-by:
Paul E. McKenney <paulmck@us.ibm.com> Signed-off-by:
-
Josh Triplett authored
Implement torture testing for the "sched" variant of RCU, which uses preempt_disable, preempt_enable, and synchronize_sched. Signed-off-by:
-
Josh Triplett authored
Use the newly-generic synchronous deferred free function to implement torture testing for rcu_bh using synchronize_rcu_bh rather than the asynchronous call_rcu_bh. Signed-off-by:
-
Josh Triplett authored
Use the newly-generic synchronous deferred free function to implement torture testing for RCU using synchronize_rcu rather than the asynchronous call_rcu. Signed-off-by:
-
Josh Triplett authored
Make srcu_torture_deferred_free use cur_ops->sync() so it will work for any implementation. Move and rename it in preparation for use in the ops of other implementations. Signed-off-by:
-
Josh Triplett authored
rcutorture currently has one writer and an arbitrary number of readers. To better exercise some of the code paths in RCU implementations, add fake writer threads which call the synchronize function for the RCU variant in a loop, with a delay between calls to arrange for different numbers of writers running in parallel. [bunk@stusta.de: cleanup] Acked-by:
-
Josh Triplett authored
rcu_random uses a counter rrs_count to occasionally mix data from get_random_bytes into the state of its pseudorandom generator. However, the rrs_counter gets declared as an unsigned long, and rcu_random checks for --rrs_count < 0, so this code will never mix any real random data into the state, and will thus always return the same sequence of random numbers. Also, change the return value of rcu_random from long to unsigned long, to avoid potential issues caused by the use of the % operator, which can return negative values for negative left operands. Signed-off-by:
-
Josh Triplett authored
rcu_torture_init kmallocs the array of reader threads, then creates each one with kthread_run, cleaning up with rcu_torture_cleanup if this fails. rcu_torture_cleanup calls kthread_stop on any non-NULL pointer in the array; however, any readers after the one that failed to start up will have invalid pointers, not null pointers. Avoid this by using kzalloc instead. Signed-off-by:
-
Josh Triplett authored
The comment for rcutorture's torture_type parameter only lists the RCU variants rcu and srcu, but not rcu_bh; add rcu_bh to the list. Signed-off-by:
-
Josh Triplett authored
Signed-off-by:
-
Alan Stern authored
This patch (as762) changes the cpufreq_transition_notifier_list from a blocking_notifier_head to an srcu_notifier_head. This will prevent errors caused attempting to call down_read() to access the notifier chain at a time when interrupts must remain disabled, during system suspend. It's not clear to me whether this is really necessary; perhaps the chain could be made into an atomic_notifier. However a couple of the callout routines do use blocking operations, so this approach seems safer. The head of the notifier chain needs to be initialized before use; this is done by an __init routine at core_initcall time. If this turns out not to be a good choice, it can easily be changed. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Jesse Brandeburg <jesse.brandeburg@gmail.com> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Alan Stern authored
Currently the init_srcu_struct() routine has no way to report out-of-memory errors. This patch (as761) makes it return -ENOMEM when the per-cpu data allocation fails. The patch also makes srcu_init_notifier_head() report a BUG if a notifier head can't be initialized. Perhaps it should return -ENOMEM instead, but in the most likely cases where this might occur I don't think any recovery is possible. Notifier chains generally are not created dynamically. [akpm@osdl.org: avoid statement-with-side-effect in macro] Signed-off-by:
-
Alan Stern authored
This patch (as751) adds a new type of notifier chain, based on the SRCU (Sleepable Read-Copy Update) primitives recently added to the kernel. An SRCU notifier chain is much like a blocking notifier chain, in that it must be called in process context and its callout routines are allowed to sleep. The difference is that the chain's links are protected by the SRCU mechanism rather than by an rw-semaphore, so calling the chain has extremely low overhead: no memory barriers and no cache-line bouncing. On the other hand, unregistering from the chain is expensive and the chain head requires special runtime initialization (plus cleanup if it is to be deallocated). SRCU notifiers are appropriate for notifiers that will be called very frequently and for which unregistration occurs very seldom. The proposed "task notifier" scheme qualifies, as may some of the network notifiers. Signed-off-by:
Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by:
-
Paul E. McKenney authored
Adds SRCU operations to rcutorture and updates rcutorture documentation. Also increases the stress imposed by the rcutorture test. [bunk@stusta.de: make needlessly global code static] Signed-off-by:
-
Paul E. McKenney authored
Updated patch adding a variant of RCU that permits sleeping in read-side critical sections. SRCU is as follows: o Each use of SRCU creates its own srcu_struct, and each srcu_struct has its own set of grace periods. This is critical, as it prevents one subsystem with a blocking reader from holding up SRCU grace periods for other subsystems. o The SRCU primitives (srcu_read_lock(), srcu_read_unlock(), and synchronize_srcu()) all take a pointer to a srcu_struct. o The SRCU primitives must be called from process context. o srcu_read_lock() returns an int that must be passed to the matching srcu_read_unlock(). Realtime RCU avoids the need for this by storing the state in the task struct, but SRCU needs to allow a given code path to pass through multiple SRCU domains -- storing state in the task struct would therefore require either arbitrary space in the task struct or arbitrary limits on SRCU nesting. So I kicked the state-storage problem up to the caller. Of course, it is not permitted to call synchronize_srcu() while in an SRCU read-side critical section. o There is no call_srcu(). It would not be hard to implement one, but it seems like too easy a way to OOM the system. (Hey, we have enough trouble with call_rcu(), which does -not- permit readers to sleep!!!) So, if you want it, please tell me why... [josht@us.ibm.com: sparse notation] Signed-off-by:
-
Eric W. Biederman authored
This moves the declarations for the architecture helpers into include/linux/htirq.h from the generic include/linux/pci.h. Hopefully this will make this distinction clearer. htirq.h is included where it is needed. The dependency on the msi code is fixed and removed. The Makefile is tidied up. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Eric W. Biederman authored
This is just a few makefile tweaks and some file renames. Signed-off-by:
-
Eric W. Biederman authored
It turns out msi_ops was simply not enough to abstract the architecture specific details of msi. So I have moved the resposibility of constructing the struct irq_chip to the architectures, and have two architecture specific functions arch_setup_msi_irq, and arch_teardown_msi_irq. For simple architectures those functions can do all of the work. For architectures with platform dependencies they can call into the appropriate platform code. With this msi.c is finally free of assuming you have an apic, and this actually takes less code. The helpers for the architecture specific code are declared in the linux/msi.h to keep them separate from the msi functions used by drivers in linux/pci.h Signed-off-by:
-
Eric W. Biederman authored
The logic works like this. Since we no longer track the state logic by hand in msi.c startup and shutdown are no longer needed. By updating msi_set_mask_bit to work on msi devices that do not implement a mask bit we can always call the mask/unmask functions. What we really have are mask and unmask so we use them to implement the .mask and .unmask functions instead of .enable and .disable. By switching to the handle_edge_irq handler we only need an ack function that moves the irq if necessary. Which removes the old end and ack functions and their peculiar logic of sometimes disabling an irq. This removes the reliance on pre genirq irq handling methods. Signed-off-by:
-
Eric W. Biederman authored
Currently msi.c is doing sanity checks that make certain before an irq is destroyed it has no more users. By adding irq_has_action I can perform the test is a generic way, instead of relying on a msi specific data structure. By performing the core check in dynamic_irq_cleanup I ensure every user of dynamic irqs has a test present and we don't free resources that are in use. In msi.c this allows me to kill the attrib.state member of msi_desc and all of the assciated code to maintain it. To keep from freeing data structures when irq cleanup code is called to soon changing dyanamic_irq_cleanup is insufficient because there are msi specific data structures that are also not safe to free. Signed-off-by:
-
Eric W. Biederman authored
This patch implements two functions ht_create_irq and ht_destroy_irq for use by drivers. Several other functions are implemented as helpers for arch specific irq_chip handlers. The driver for the card I tested this on isn't yet ready to be merged. However this code is and hypertransport irqs are in use in a few other places in the kernel. Not that any of this will get merged before 2.6.19 Because the ipath-ht400 is slightly out of spec this code will need to be generalized to work there. I think all of the powerpc uses are for a plain interrupt controller in a chipset so support for native hypertransport devices is a little less interesting. However I think this is a half way decent model on how to separate arch specific and generic helper code, and I think this is a functional model of how to get the architecture dependencies out of the msi code. [akpm@osdl.org: Kconfig fix] Signed-off-by:
-
Eric W. Biederman authored
This adds defines for the hypertransport capability subtypes and starts using them a little. [akpm@osdl.org: fix typo] Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Eric W. Biederman authored
With more irqs in the system we don't need this. Signed-off-by:
-
Eric W. Biederman authored
After raising the number of irqs the system supports this function is no longer necessary. Signed-off-by:
-
Eric W. Biederman authored
This refactors the irq handling code to make the vectors a per cpu resource so the same vector number can be simultaneously used on multiple cpus for different irqs. This should make systems that were hitting limits on the total number of irqs much more livable. [akpm@osdl.org: build fix] [akpm@osdl.org: __target_IO_APIC_irq is unneeded on UP] Signed-off-by:
-
Eric W. Biederman authored
This is a small pessimization but it paves the way for making this information per cpu. Which allows the the maximum number of IRQS to become NR_CPUS*224. Signed-off-by:
-
Eric W. Biederman authored
This patch adds support for systems that cannot receive every interrupt on a single cpu simultaneously, in the check to see if we have enough HARDIRQ_BITS. MAX_HARDIRQS_PER_CPU becomes the count of the maximum number of hardare generated interrupts per cpu. On architectures that support per cpu interrupt delivery this can be a significant space savings and scalability bonus. This patch adds support for systems that cannot receive every interrupt on Signed-off-by:
-
