- 04 Sep, 2019 40 commits
-
-
Geert Uytterhoeven authored
While commit b6b996b6 ("treewide: Use DEVICE_ATTR_RW") converted the rx_fifo_timeout attribute, it forgot to convert rx_fifo_trigger due to a slightly different function naming. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20190731124555.14349-1-geert+renesas@glider.beSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vivek Gautam authored
For QUP IP versions 2.5 and above the oversampling rate is halved from 32 to 16. Update this rate after reading hardware version register, so that the clock divider value is correctly set to achieve required baud rate. Signed-off-by:
Vivek Gautam <vivek.gautam@codeaurora.org> Link: https://lore.kernel.org/r/20190801121153.10613-1-vivek.gautam@codeaurora.orgSigned-off-by:
-
Robert Middleton authored
When closing and shutting down the exar serial port, if the chip has not finished sending all of the data in its buffer, the remaining bytes will be lost. Hold off on the shutdown until the bytes have all been sent. Signed-off-by:
Robert Middleton <robert.middleton@rm5248.com> Link: https://lore.kernel.org/r/20190801145640.26080-1-robert.middleton@rm5248.comSigned-off-by:
-
Andy Shevchenko authored
There are Exar custom divisor support in 8250_port which belongs to 8250_exar module. Move it out to the correct module and do not contaminate generic code with it. Cc: Aaron Sierra <asierra@xes-inc.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190731170558.52897-3-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
There are Exar quirks in 8250_port which belong to 8250_exar module. Extract PM routine to the correct module and do not contaminate generic code with it. Cc: Aaron Sierra <asierra@xes-inc.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
-
Andy Shevchenko authored
Since we have a separate driver there is no need to autoconfigure ports, we already know what they are. Drop autoconfiguration in 8250_port and move type detection to 8250_exar. Cc: Aaron Sierra <asierra@xes-inc.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
-
Greg Kroah-Hartman authored
This is a driver, do not call "raw" sysfs functions, instead call driver core ones. Specifically convert the use of sysfs_create_file() and sysfs_remove_file() to use device_create_file() and device_remove_file() Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-serial@vger.kernel.org Link: https://lore.kernel.org/r/20190704084617.3602-4-gregkh@linuxfoundation.orgSigned-off-by:
-
Stephen Rothwell authored
A powerpc allyesconfig build produces this warning: In file included from include/linux/radix-tree.h:16, from include/linux/idr.h:15, from include/linux/kernfs.h:13, from include/linux/sysfs.h:16, from include/linux/kobject.h:20, from include/linux/device.h:16, from include/linux/platform_device.h:13, from drivers/tty/serial/xilinx_uartps.c:16: drivers/tty/serial/xilinx_uartps.c: In function 'cdns_uart_console_write': include/linux/spinlock.h:288:3: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized] _raw_spin_unlock_irqrestore(lock, flags); \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/tty/serial/xilinx_uartps.c:1197:16: note: 'flags' was declared here unsigned long flags; ^~~~~ It looks like gcc just can't track the relationship between "locked" and "flags", and it is obvious that "flags" won't be used when "locked" is zero, so the simplest thing is to initialise flags. Cc: Jiri Slaby <jslaby@suse.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by:Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20190731160557.6a09c3e1@canb.auug.org.auSigned-off-by:
-
Stephen Boyd authored
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-45-swboyd@chromium.orgSigned-off-by:
-
Andrey Smirnov authored
Last steps of .shutdown() code are identical for lpuart and lpuart32 cases, so move it all into a standalone subroutine. Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-imx@nxp.com Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20190729195226.8862-19-andrew.smirnov@gmail.comSigned-off-by:
-
Andrey Smirnov authored
By the time lpuart_shutdown() calls lpuart_stop_tx() UARTCR2_TE and UARTCR2_TIE (which the latter will clear) are already cleared, so that function call should effectively be a no-op. Moreso, lpuart_stop_tx() is expected to be executed with port spinlock held, which the caller doesn't. Given all that, drop the call to lpuart_stop_tx() in lpuart_shutdown(). In case of lpuart32_shutdown()/lpuart32_stop_tx(), TIE won't even be set if lpuart_dma_tx_use is true. Drop it there as well. Signed-off-by:
-
Andrey Smirnov authored
The check for uart_circ_empty(xmit) || uart_tx_stopped(&sport->port) appears in multiple places in the driver. Move it into a helper function. Signed-off-by: -
Andrey Smirnov authored
Use cpu_relax() instead of barrier() in a tight polling loops to make them a bit more idiomatic. Should also improve things on ARM64 a bit since cpu_relax() will expand into "yield" instruction there. Signed-off-by:
-
Andrey Smirnov authored
Busy polling on a bit in a register is used in multiple places in the driver. Move it into a shared function. Signed-off-by:
-
Andrey Smirnov authored
When dealing with 32-bit variant of LPUART IP block appropriate I/O helpers have to be used to properly deal with endianness differences. Change all of the offending code to do that. Fixes: a5fa2660 ("tty/serial/fsl_lpuart: Add CONSOLE_POLL support for lpuart32.") Signed-off-by:
-
Andrey Smirnov authored
Clearing CSTOPB bit if it is set is functionally equivalent to jsut clearing it unconditionally. Drop unnecessary check. Signed-off-by:
-
Andrey Smirnov authored
Drop unnecessary extra parenthesis in the driver. Signed-off-by:
-
Andrey Smirnov authored
The check for termios->c_cflag & CRTSCTS ensure that if we reach else branch, CRTSCTS in termios->c_cflag is already going to be cleard. Doing so explicitly there is not necessary. Drop it. Signed-off-by:
-
Andrey Smirnov authored
While sharing code for Tx interrupt handler between 8 and 32 bit variant of the peripheral saves a bit of code duplication it also adds quite a number of lpuart_is_32() checks which makes it harder to understand. Move shared bits back into corresponding lpuart*_transmit_buffer functions, split lpuart_txint into lpuart_txint and lpuart32_txint so we can drop all extra lpuart_is_32() check and make the code flow more linear. Signed-off-by:
-
Andrey Smirnov authored
Although I haven't observed this bug in practice, it seems that the code for handling x_char of LPUART is pretty much identical to that of i.MX. So the fix found in commit 7e2fb5aa ("serial: imx: Fix issue in software flow control"): serial: imx: Fix issue in software flow control After send out x_char in UART driver, x_char needs to be cleared by UART driver itself, otherwise data in TXFIFO can no longer be sent out. Also tx counter needs to be increased to keep track of correct number of transmitted data. Signed-off-by:
Jiada Wang <jiada_wang@mentor.com> Signed-off-by:
-
Andrey Smirnov authored
Uart_write_wakeup() will already be called as a part of lpuart*_transmit_buffer() call, so there doesn't seem to be a reason to call it again right after. It also appears that second uart_write_wakeup() might potentially cause unwanted write wakeup when transmitting an x_char. See commit 5e42e9a3 ("serial: imx: Fix x_char handling and tx flow control") where this problem was fixed in a very similarly structured i.MX UART driver. Signed-off-by:
-
Andrey Smirnov authored
Fix bogus indentation in rx_dma_timer_init(). Signed-off-by:
-
Andrey Smirnov authored
It appears that lpuart_rxint, lpuart_txint and lpuart32_rxint were modelled after identical function found in UART driver for i.MX. However, while said functions are used as individual IRQ handlers in i.MX driver (in case of i.MX1), it is not the case for LPUART. Given that, there's no need for us to restrict the prototype of the handler to irqreturn_t foo(int, void *) and we can drop all of uneened boilerplate code by changing it void foo(struct lpuart_port *). Signed-off-by:
-
Andrey Smirnov authored
Switching baud rate might cause bogus data to appear in HW FIFO. Add code to do a HW FIFO flush to .flush_buffer callback to avoid that. Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Stefan Agner authored
After overruns the FIFO pointers become misaligned. This typically shows by characters still being stuck in the FIFO despite the empty flag being asserted. After the first assertion of the overrun flag the empty flag still seems to indicate FIFO state correctly and all data can be read. However, after another overrun assertion the FIFO seems to be off by one such that the last received character is still in the FIFO (despite the empty flag being asserted). Flushing the receive FIFO reinitializes pointers. Hence it is recommended to flush the FIFO after overruns, see also: https://community.nxp.com/thread/321175 Hence, on assertion of the overrun flag read the remaining data from the FIFO and flush buffers. Signed-off-by:
Stefan Agner <stefan.agner@toradex.com> Acked-by:
Max Krummenacher <max.krummenacher@toradex.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Cory Tusar <cory.tusar@zii.aero> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-imx@nxp.com Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20190729195226.8862-3-andrew.smirnov@gmail.comSigned-off-by:
-
Stefan Agner authored
When using DMA framing error get cleared properly. However, due to the additional read from the data register, an underflow in the receive FIFO buffer occurs (the FIFO pointer gets out of sync). Clear the FIFO in case an underflow has occurred. Also disable the receiver during this operation and when reading the data register to minimize potential interference. Signed-off-by:
-
Sergey Organov authored
Called in only one place, for RS232, it only obscures things, as it doesn't go well with 2 similar named functions, imx_uart_rts_inactive() and imx_uart_rts_active(), that both are RS485-specific. Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Tested-by:
Sergey Organov <sorganov@gmail.com> Link: https://lore.kernel.org/r/1564167161-3972-4-git-send-email-sorganov@gmail.comSigned-off-by:
-
Sergey Organov authored
imx_uart_set_mctrl() happened to set UCR2_CTSC bit whenever TIOCM_RTS was set, no matter if RTS/CTS handshake is enabled or not. Now fixed by turning handshake on only when CRTSCTS bit for the port is set. Reviewed-by:
-
Sergey Organov authored
Don't let receiver hardware automatically control RTS output if it was requested to be inactive. To ensure this, set_termios() shouldn't set UCR2_CTSC bit if UCR2_CTS (=TIOCM_RTS) is cleared. Added corresponding check in imx_uart_rts_auto() to fix this. Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
-
Andy Shevchenko authored
The established way to provide PM callbacks is through struct dev_pm_ops which is more generic. Convert driver to use it instead of legacy approach. Signed-off-by:
-
Je Yen Tam authored
Add support for NI-Serial PXIe-RS232, PXI-RS485 and PXIe-RS485 devices. Signed-off-by:
Je Yen Tam <je.yen.tam@ni.com> Link: https://lore.kernel.org/r/20190726074012.2590-1-je.yen.tam@ni.comSigned-off-by:
-
Erwan Le Ray authored
Use __maybe_unused for power management related functionsinstead of fixes: 270e5a74 ("serial: stm32: add wakeup mechanism") Signed-off-by:
Erwan Le Ray <erwan.leray@st.com> Link: https://lore.kernel.org/r/1560433800-12255-6-git-send-email-erwan.leray@st.comSigned-off-by:
-
Erwan Le Ray authored
Use pm_runtime for clock management. Signed-off-by:
Bich Hemon <bich.hemon@st.com> Signed-off-by:
-
Erwan Le Ray authored
Select either pinctrl sleep state in suspend function or default state in resume function. Signed-off-by:
-
Erwan Le Ray authored
Add a note for enabling wakeup capabilities of usart Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1560433800-12255-2-git-send-email-erwan.leray@st.comSigned-off-by:
-
Navid Emamdoost authored
pci_ioremap_bar may return null. This is eventually de-referenced at drivers/dma/dw/core.c:1154 and drivers/dma/dw/core.c:1168. A null check is needed to prevent null de-reference. I am adding the check and in case of failure. Thanks to Andy Shevchenko for the hint on the necessity of pci_iounmap when exiting. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20190719174848.24216-1-navid.emamdoost@gmail.comSigned-off-by:
-
Fugang Duan authored
VF610/LS1021a/i.MX7ULP/i.MX8QXP reference manual describe the TXFIFOSIZE/RXFIFOSIZE field as below. 000b - FIFO/Buffer depth = 1 dataword. 001b - FIFO/Buffer depth = 4 datawords. 010b - FIFO/Buffer depth = 8 datawords. 011b - FIFO/Buffer depth = 16 datawords. 100b - FIFO/Buffer depth = 32 datawords. 101b - FIFO/Buffer depth = 64 datawords. 110b - FIFO/Buffer depth = 128 datawords. 111b - FIFO/Buffer depth = 256 datawords. (Reserved for VF610) So the FIFO depth should be: 0x1 << (val ? (val + 1) : 0) Signed-off-by:
-
Fugang Duan authored
Since .sg_init_one() already set sg entry page like below code. sg_init_one() sg_init_table(sg, 1); sg_set_buf(sg, buf, buflen); So it should not set sg entry page again, remove the redundant code. Signed-off-by:
-
Fugang Duan authored
Use kzalloc() instead of kmalloc() to get clean rx buffer that is useful for DMA mode debug to check the data moving validity. Signed-off-by:
-
Fugang Duan authored
Add earlycon support for imx8qxp platform. Signed-off-by:
-
