This is in case others copy this code (which has already happened...)

tg3.c has a bug where it can find the wrong 5704 peer on a machine with
PCI domains.  The problem is that pci_find_slot() can't distinguish
whether it has the correct domain or not.

This patch fixes that problem by introducing pci_get_slot().

This is needed to show pci bus topology to userspace properly.

When plugging a 33MHz card into a bus that's running at 66MHz, I'd like
to see a better error message than:

acpiphp_glue: notify_handler: unknown event type 0x5 for \_SB_.SBA0.PCI4.S2F0

The following patch would give us:

Device \_SB_.SBA0.PCI4.S2F0 cannot be configured due to a frequency mismatch

which I think is clearer.

The functions are not named *_skel_*, so it seems useful not to call them with
this.

Greg,

As discussed about six or so months ago, we agreed to hold off this
patch until fairly late, due to its ability to catch duplicate PCI
driver names.  Please note that I haven't attempted to reproduce the
problem with recent kernels, and that all ARM kernel patches released
since then have had this patch in.

I'm guessing this will actually be 2.6.1 material since it probably
doesn't show for PCI drivers which are part of the kernel tree.


If pci_register_driver fails, the register the PCI driver structure
will not be registered with the driver model.  pci_register_driver
returns with negative value, and we then attempt to unregister the
driver structure.  This leads to an oops in the driver model.

The driver model does not return the number of devices it successfully
bound the driver to, and neither does pci_register_driver() return
this information.

Therefore, all of the code below is redundant.

(There's a little redundancy left in drivers/pci/pci-driver.c but it
is harmless unlike this block.)

into cheetah.(none):/home/davem/src/BK/sparc-2.6

into home.osdl.org:/home/torvalds/v2.5/linux

From: Dominik Brodowski <linux@dominikbrodowski.de>

This brown paper bag patch is needed to assure cpufreq_update_policy works
correctly.

Please apply, else the next ACPI patch will cause trouble with thermal
management [it needs cpufreq_update_policy to work properly].

Fix a horribly wrong memcpy instruction in cpufreq_update_policy which
caused it to oops.

From: Torsten Duwe <duwe@suse.de>

pmdisk.c uses struct new_utsname, so give it the header.

From: Christoph Hellwig <hch@lst.de>

Put kernel_flag back to where it used to be, near its comment and its
EXPORT_SYMBOL.

From: Andi Kleen <ak@muc.de>

Just fix two warnings on x86-64 that were recently introduced (one by me
and the other by the sort extable changes)

  Add comment for HdrS ver 0x201

into hopper.(none):/usr/src/kernel/sparc-2.6

into home.osdl.org:/home/torvalds/v2.5/linux

  - Fix kconfig botch (bk automerge can be rather flakey)
  - The gadgetfs patches going with the kconfig cleanups

into home.osdl.org:/home/torvalds/v2.5/linux

into kroah.com:/home/greg/linux/BK/i2c-2.6

into kroah.com:/home/greg/linux/BK/usb-2.6

Here is a patch that brings the lm75 and lm78 drivers in compliance with
sysfs naming conventions. The drivers as found in existing 2.6 kernels
do not have a digit appended to the temperature-related files names as
the sysfs naming conversion recommends (obviously because they each have
a single temperature channel). As a result, libsensors won't find the
files.

It was discussed on the list wether a '1' should be appended in this
case, and our conclusion was that it would be better to do so because it
helps automatic processing of the sysfs exported files. Please apply if
you agree with this.

On Tue, 27 Jan 2004, Greg KH wrote:

> Hm, can you send me a patch to fix up snd_usb_extigy_boot_quirk() in
> sound/usb/usbaudio.c now that this patch broke that code?  :)

Here it is.  The problem with changing things in the core is always that
you may miss some of the repercussions.  In this case the patch will
restore the code's original functionality.

However the whole thing looks a bit creaky to me.  Changing device
descriptors and who knows what else without informing usbcore isn't a good
idea.  What this code _really_ appears to need is some form of
usb_device_reenumerate().  Such a function would fit very nicely into the
framework I've worked out for the revised usb_device_reset(); maybe I'll
add it in there.  It would do essentially the same thing as device_reset
except for skipping the actual port reset.

I accidentally left a debug printk in the sn2 timer_interrupt().

into home.osdl.org:/home/torvalds/v2.5/linux

into intel.com:/home/lenb/src/linux-acpi-test-2.6.2

into intel.com:/home/lenb/src/linux-acpi-test-2.6.1

        from ia64 via Alex Williamson

	from Jes Sorensen

	from Jes Sorensen

into home.osdl.org:/home/torvalds/v2.5/linux

This patch fixes a simple error in a couple of utility routines.  They
will no longer try to dereference a NULL actconfig pointer.  Also, they
will work a little better if the configuration is changed while they are
running (which should never happen anyway).

The following patch adds support for the ADM1025 evaluation board to the
i2c-parport (and i2c-parport-light) driver(s). In fact, it happens that
it was already supported as an ADM1032 evaluation board, so it is just a
matter of documenting it correctly.