- 07 Feb, 2007 40 commits
-
-
Ishizaki Kou authored
USB host controller in SCC requires enable sequence. It should be done before USB host drivers start. Signed-off-by:
Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Ishizaki Kou authored
This patch creates Celleb platform dependent files to support interrupts. Signed-off-by:
Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by:
-
Ishizaki Kou authored
This patch creates Celleb platform dependent files which add interfaces to call hypervisor. Signed-off-by:
-
Jiri Kosina authored
arch/powerpc/platforms/powermac/smp.c::smp_core99_kick_cpu() contains local_irq_disable() call after local_irq_save(). This looks redundant. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jiri Kosina authored
arch/powerpc/platforms/86xx/mpc86xx_smp.c::smp_86xx_kick_cpu() contains local_irq_disable() call after local_irq_save(). This looks redundant. Signed-off-by:
-
Vitaly Bordug authored
Default config file for mpc8272ads (powerpc port).Though relevant bits went in, it is required to keep proper default configuration for the target, which seems to be missed initially. Signed-off-by:
Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by:
-
Vitaly Bordug authored
Recent update of asm-powerpc/io.h caused cpm-related stuff to break in the current kernel. Current patch fixes it, as well as other inconsistencies expressed, that do not permit targets from working properly: - Updated dts with a chosen node with interrupt controller, - fixed messed device IDs among CPM2 SoC devices, - corrected odd header name and fixed type in defines, - Added 82xx subdir to the powerpc/platforms Makefile, missed during initial commit, - new solely-powerpc header file for 8260 family (was using one from arch/ppc, this one cleaned up from the extra stuff), in fact for now a placeholder to get the board-specific includes for stuff not yet capable to live with devicetree peeks only - Fixed couple of misprints in reference mpc8272 dts. Signed-off-by:
-
Vitaly Bordug authored
This contains important fixes for the CPM2 PIC code. Eliminated CPM_IRQ_OFFSET, pulling the respective interrupt numbers from the interrupt mapping. Updated devicetree files to reflect that. Changed direct IC-related IO accesses to the IO accessors. Fixed all the sense values to keep coherency with ipic. In the current code, CPM2 stuff will have no IRQs and hence could be hardly usable. Signed-off-by:
-
Geoff Levand authored
Update ps3_defconfig to enable USB mass storage and VFAT. Signed-off-by:
Geoff Levand <geoffrey.levand@am.sony.com> Acked-by:
-
Geoff Levand authored
Add the missing pieces to support DMA scatter-gather on the PS3 system bus. Signed-off-by:
-
Geoff Levand authored
Move the structures and routines needed for PS3 vuart port device registration to asm-powerpc/ps3.h. Signed-off-by:
-
Geoff Levand authored
Move the PS3 system bus routines from drivers/ps3 to arch/powerpc/platforms/ps3. Signed-off-by:
-
Robert P. J. Day authored
Add the inline function "is_power_of_2()" to log2.h, where the value zero is *not* considered to be a power of two. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Acked-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Olof Johansson authored
Allow more than the default 256 MPIC sources. Allocates a new flag (MPIC_LARGE_VECTORS) to be used by platform code when instantiating the mpic. I picked 11 bits worth right now since it would cover the number of sources on any hardware I have seen. It can always be increased later if needed. Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Olof Johansson authored
Support for PA6T-style PMC registers. PMCs are completely implementation-dependent on PPC, and PA6T numbers them differently from the IBM model. Signed-off-by:
-
Olof Johansson authored
Introduce _SYSDEV_ATTR(), to be used to just define the struct, and not a named variable with the attribute. Useful for arrays of sysdev_attributes. Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Olof Johansson authored
Add cputable entries for which type of PMC implementation the processor has. I've only filled in the current 64-bit processors, the unfilled default value will have same behaviour as before so it can be done over time as needed. Also tidy up the dummy_perf implementation a bit, aggregating it into one function with ifdefs instead of several. Signed-off-by:
-
Olof Johansson authored
Clean up the ctr_read/write a bit. It's currently defined in the include but only used in one C file each. The only exception is the classic version, so keep that in the include and define in the C file as appropriate. Signed-off-by:
-
Timur Tabi authored
The grow() function in the rheap library allocates a larger array of blocks, copies the contents of the old blocks array to the newly allocated array and fixes the list_head pointers after the copy. At the end, the new blocks must be enqueued to the empty_list of the rh_info_t structure. This patch fixes a bug where the code was indexing past the end of the array when enqueueing blocks. The UCC ethernet driver, which uses the rheap allocator, experiences kernel panics because of this bug. Signed-off-by:
Ionut Nicu <ionut.nicu@freescale.com> Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
-
Geoff Levand authored
Updates for ps3_defconfig. Signed-off-by:
-
Geoff Levand authored
Remove an unneeded header include from ps3.h. Signed-off-by:
-
Geert Uytterhoeven authored
Allow the PS3 AV settings driver to access the default video mode stored in the OS area. Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by:
-
Geoff Levand authored
Add a new routine ps3_get_firmware_version() and use it to output the firmware version to dmesg. Signed-off-by:
-
Geoff Levand authored
Remove the unneded routine ps3_show_cpuinfo(). The common platform code now prints the same information. Signed-off-by:
-
Geoff Levand authored
Add a comment and a preprocessor macro to help clearify the alignment needs of the PS3 interrupt bitmap. Signed-off-by:
-
Geert Uytterhoeven authored
PS3 interrupt core update: - Add ps3_alloc_irq() and ps3_free_irq(), to allocate a virtual interrupt number for an interrupt outlet, which is needed by the PS3 GPU frame buffer device and audio drivers Signed-off-by: -
Geoff Levand authored
Change the PS3 irq allocation routines to take an argument indicating which cpu (processor thread) the interrupt should be serviced on. The current system configuration favors device interrupts that are serviced on cpu0, so that is used as the default. Signed-off-by:
-
Benjamin Herrenschmidt authored
Change the PS3 interrupt bitmask routines to be lockless. Signed-off-by:
-
Geoff Levand authored
PS3 fixups for interrups on SMP. Fixes the alignment of the interrupt status bitmap, changes the hypervisor interrupt calls to the '_ext' versions that take an explicit processor thread ID. Signed-off-by:
-
Geoff Levand authored
Rename some PS3 interrupt symbols to avoid name clashes and aid debugging. No change to code. Signed-off-by:
-
Geoff Levand authored
Remove incorrect alignment attributes in PS3 platform code for struct spe_shadow, struct os_area_header, and struct os_area_params. Signed-off-by:
-
Benjamin Herrenschmidt authored
Fix two minor bugs in the PS3 system bus mmio region code. First, on error or when freeing a region, retain the bus_addr and len fields to allow subsequent calls to create the region. Second, correct the region address argument to the lv1_unmap_device_mmio_region() call. Fixes modprobe/rmmod of some drivers. Signed-off-by:
-
Geert Uytterhoeven authored
Handle storage-related repository data: - Add missing implementations of ps3_repository_read_stor_*() repository accessors. - Dump storage properties in debug mode - Add PS3_DEV_TYPE_STOR_{DISK,ROM,FLASH} device types (which are identical to the corresponding SCSI device types) to enum ps3_dev_type Signed-off-by: -
Geoff Levand authored
Various fixes for the PS3 repository code: - Sync signatures of function prototypes and implementations (enum vs. unsigned int) - Correct references to `regions' as `registers': o Correct enum ps3_region_type as enum ps3_reg_type, o Correct PS3_REGION_TYPE_* as PS3_REG_TYPE_*, o Correct ps3_repository_find_region() as ps3_repository_find_reg(). - Correct function name in pr_debug() call - Minor error condition improvements. Signed-off-by: -
Linas Vepstas authored
It appears that EEH is improperly enabled for some Power4 systems. On these systems, the ibm,set-eeh-option returns a value of success even when EEH is not supported on the given node. Thus, an explicit check for support is required. During boot, on power4, without this patch, one sees messages similar to: EEH: event on unsupported device, rc=0 dn=/pci@400000000110/IBM,sp@1 EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2 EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2,2 etc. The patch makes these go away. Without this patch, EEH recovery does seem to work correctly for at least some devices (I tested ethernet e1000), but fails to recover others (the Emulex LightPulse LPFC, most notably). Off the top of my head, I don't remember why some devices are affected, but not others. The PAPR indicates that the correct way to test for EEH is as done in this patch; its not clear to me if this was in the PAPR all along, or recently added; if it was there all along, its not clear to me why this hadn't been fixed long ago. I suspect only certain firmware levels are affected. Signed-off-by:
Linas Vepstas <linas@austin.ibm.com> Signed-off-by:
-
Robert P. J. Day authored
Replace an apparent typo of CONFIG_SERIAL_CPM_SMC with CONFIG_SERIAL_CPM_SMC2. Signed-off-by:
-
Nathan Lynch authored
This workaround was copy-pasted from the powermac code. It's not necessary for maple. Signed-off-by:
Nathan Lynch <ntl@pobox.com> Signed-off-by:
-
Vitaly Bordug authored
This add support of the Freescale mpc86xads reference board to arch/powerpc. Supported SMC1 and SMC2 (UART and serial console), FEC 100Mbps Ethernet, SCC1 Ethernet (10Mbps hdx) Signed-off-by:
-
Vitaly Bordug authored
This adds the core 8xx stuff and specifically mpc885ads board-specific bits to arch/powerpc. Respective Kconfig has been cleaned up from the stuff not yet ported over to avoid confusion. Updated and cleaned version. Signed-off-by:
-
Vitaly Bordug authored
This covers common CPM access functions, CPM interrupt controller code, micropatch and a few compatibility things to kee the same driver base working with arch/ppc. This version is refined with all the comments (mostly PIC-related) addressed. Signed-off-by:
-
