Paulian reported the below kernel crash on Ryzen 5 system:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000073
RIP: 0010:.LC0+0x41f/0xa00
RSP: 0018:ffffa9968003bdd0 EFLAGS: 00010002
RAX: ffffffffb113b130 RBX: 0000000000000000 RCX: 00000000000005a7
RDX: 00000000000000ff RSI: ffff8b46dee651a0 RDI: ffffffffb1bd617c
RBP: 0000000000000246 R08: 00000000000251a0 R09: 0000000000000000
R10: ffffd81f11a38200 R11: ffff8b52e8e0a161 R12: ffffffffb19db220
R13: 0000000000000007 R14: ffffffffb17e4888 R15: 5dccd7affc30a31e
FS:  0000000000000000(0000) GS:ffff8b46dee40000(0000) knlGS:0000000000000000
CR2: 0000000000000073 CR3: 000080128120a000 CR4: 00000000003406e0
Call Trace:
 ? sp_get_psp_master_device+0x56/0x80
 ? map_properties+0x540/0x540
 ? psp_pci_init+0x20/0xe0
 ? map_properties+0x540/0x540
 ? sp_mod_init+0x16/0x1a
 ? do_one_initcall+0x4b/0x190
 ? kernel_init_freeable+0x19b/0x23c
 ? rest_init+0xb0/0xb0
 ? kernel_init+0xa/0x100
 ? ret_from_fork+0x22/0x40

Since Ryzen does not support PSP/SEV firmware hence i->psp_data will
NULL in all sp instances. In those cases, 'i' will point to the
list head after list_for_each_entry(). Dereferencing the head will
cause kernel crash.

Add check to call get master device only when PSP/SEV is detected.
Reported-by: Paulian Bogdan Marinca <paulian@marinca.net>
Cc: Borislav Petkov <bp@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
CC: Gary R Hook <gary.hook@amd.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

All users of ablk_helper have been converted over to crypto_simd, so
remove ablk_helper.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There are no users of the original glue_fpu_begin() anymore, so rename
glue_skwalk_fpu_begin() to glue_fpu_begin() so that it matches
glue_fpu_end() again.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Now that all glue_helper users have been switched from the blkcipher
interface over to the skcipher interface, remove the versions of the
glue_helper functions that handled the blkcipher interface.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Now that all users of lrw_crypt() have been removed in favor of the LRW
template wrapping an ECB mode algorithm, remove lrw_crypt().  Also
remove crypto/lrw.h as that is no longer needed either; and fold
'struct lrw_table_ctx' into 'struct priv', lrw_init_table() into
setkey(), and lrw_free_table() into exit_tfm().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Now that all users of xts_crypt() have been removed in favor of the XTS
template wrapping an ECB mode algorithm, remove xts_crypt().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the AESNI AVX and AESNI AVX2 implementations of Camellia from
the (deprecated) ablkcipher and blkcipher interfaces over to the
skcipher interface.  Note that this includes replacing the use of
ablk_helper with crypto_simd.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the x86 asm implementation of Camellia from the (deprecated)
blkcipher interface over to the skcipher interface.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The XTS template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic XTS code themselves via xts_crypt().

Remove the xts-camellia-asm algorithm which did this.  Users who request
xts(camellia) and previously would have gotten xts-camellia-asm will now
get xts(ecb-camellia-asm) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-camellia-asm algorithm which did this.  Users who request
lrw(camellia) and previously would have gotten lrw-camellia-asm will now
get lrw(ecb-camellia-asm) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-camellia-aesni-avx2 algorithm which did this.  Users who
request lrw(camellia) and previously would have gotten
lrw-camellia-aesni-avx2 will now get lrw(ecb-camellia-aesni-avx2)
instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-camellia-aesni algorithm which did this.  Users who
request lrw(camellia) and previously would have gotten
lrw-camellia-aesni will now get lrw(ecb-camellia-aesni) instead, which
is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the x86 asm implementation of Triple DES from the (deprecated)
blkcipher interface over to the skcipher interface.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the x86 asm implementation of Blowfish from the (deprecated)
blkcipher interface over to the skcipher interface.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the AVX implementation of CAST6 from the (deprecated) ablkcipher
and blkcipher interfaces over to the skcipher interface.  Note that this
includes replacing the use of ablk_helper with crypto_simd.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-cast6-avx algorithm which did this.  Users who request
lrw(cast6) and previously would have gotten lrw-cast6-avx will now get
lrw(ecb-cast6-avx) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the AVX implementation of CAST5 from the (deprecated) ablkcipher
and blkcipher interfaces over to the skcipher interface.  Note that this
includes replacing the use of ablk_helper with crypto_simd.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

With ecb-cast5-avx, if a 128+ byte scatterlist element followed a
shorter one, then the algorithm accidentally encrypted/decrypted only 8
bytes instead of the expected 128 bytes.  Fix it by setting the
encryption/decryption 'fn' correctly.

Fixes: c12ab20b ("crypto: cast5/avx - avoid using temporary stack buffers")
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the AVX implementation of Twofish from the (deprecated)
ablkcipher and blkcipher interfaces over to the skcipher interface.
Note that this includes replacing the use of ablk_helper with
crypto_simd.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-twofish-avx algorithm which did this.  Users who request
lrw(twofish) and previously would have gotten lrw-twofish-avx will now
get lrw(ecb-twofish-avx) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the 3-way implementation of Twofish from the (deprecated)
blkcipher interface over to the skcipher interface.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The XTS template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic XTS code themselves via xts_crypt().

Remove the xts-twofish-3way algorithm which did this.  Users who request
xts(twofish) and previously would have gotten xts-twofish-3way will now
get xts(ecb-twofish-3way) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-twofish-3way algorithm which did this.  Users who request
lrw(twofish) and previously would have gotten lrw-twofish-3way will now
get lrw(ecb-twofish-3way) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the AVX and AVX2 implementations of Serpent from the
(deprecated) ablkcipher and blkcipher interfaces over to the skcipher
interface.  Note that this includes replacing the use of ablk_helper
with crypto_simd.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-serpent-avx algorithm which did this.  Users who request
lrw(serpent) and previously would have gotten lrw-serpent-avx will now
get lrw(ecb-serpent-avx) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-serpent-avx2 algorithm which did this.  Users who request
lrw(serpent) and previously would have gotten lrw-serpent-avx2 will now
get lrw(ecb-serpent-avx2) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Convert the SSE2 implementation of Serpent from the (deprecated)
ablkcipher and blkcipher interfaces over to the skcipher interface.
Note that this includes replacing the use of ablk_helper with
crypto_simd.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The XTS template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic XTS code themselves via xts_crypt().

Remove the xts-serpent-sse2 algorithm which did this.  Users who request
xts(serpent) and previously would have gotten xts-serpent-sse2 will now
get xts(ecb-serpent-sse2) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-serpent-sse2 algorithm which did this.  Users who request
lrw(serpent) and previously would have gotten lrw-serpent-sse2 will now
get lrw(ecb-serpent-sse2) instead, which is just as fast.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add ECB, CBC, and CTR functions to glue_helper which use skcipher_walk
rather than blkcipher_walk.  This will allow converting the remaining
x86 algorithms from the blkcipher interface over to the skcipher
interface, after which we'll be able to remove the blkcipher_walk
versions of these functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a function to crypto_simd that registers an array of skcipher
algorithms, then allocates and registers the simd wrapper algorithms for
them.  It assumes the naming scheme where the names of the underlying
algorithms are prefixed with two underscores.

Also add the corresponding 'unregister' function.

Most of the x86 crypto modules will be able to use these.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace memset to 0 followed by kfree with kzfree for
simplicity.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for the legacy CryptoCell 630 and 710 revs.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add device tree bindings for Arm CryptoCell 710 and 630p hardware
revisions.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove enum definition which are not used by the REE interface
driver.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The inclusion of dma-direct.h was only needed temporarily to prevent
breakage from the DMA API rework, since the actual CESA fix making it
redundant was merged in parallel. Now that both have landed, it can go.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Increase timeout delay to support longer timing linked
to rng initialization. Measurement is based on timer instead
of instructions per iteration which is not powerful on all
targets.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add optional property to enable the clock detection error
on rng block. It is used to allow slow clock source which
give correct entropy for rng.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a new property that allow to disable the clock error
detection which is required when the clock source selected
is out of specification (which is not mandatory).
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Adding optional resets property for rng.
Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>