- 31 Jul, 2011 26 commits
-
-
Peng Tao authored
For invalid extents, find other pages in the same fsblock and write them out. [pnfsblock: write_begin] Signed-off-by:
Fred Isaman <iisaman@citi.umich.edu> Signed-off-by:
Benny Halevy <bhalevy@panasas.com> Signed-off-by:
Benny Halevy <bhalevy@tonian.com> Signed-off-by:
Peng Tao <peng_tao@emc.com> Signed-off-by:
Jim Rees <rees@umich.edu> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com>
-
Fred Isaman authored
Signed-off-by:
-
Fred Isaman authored
Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: bl_write_pagelist support functions] [pnfsblock: bl_write_pagelist adjust for missing PG_USE_PNFS] Signed-off-by:
Zhang Jingwang <yyalone@gmail.com> [pnfs-block: use new write_pagelist api] Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
-
Fred Isaman authored
Note: When upper layer's read/write request cannot be fulfilled, the block layout driver shouldn't silently mark the page as error. It should do what can be done and leave the rest to the upper layer. To do so, we should set rdata/wdata->res.count properly. When upper layer re-send the read/write request to finish the rest part of the request, pgbase is the position where we should start at. [pnfsblock: mark IO error with NFS_LAYOUT_{RW|RO}_FAILED] Signed-off-by: -
Fred Isaman authored
In blocklayout driver. There are two things happening while layoutcommit/cleanup. 1. the modified extents are encoded. 2. On cleanup the extents are put back on the layout rw extents list, for reads. In the new system where actual xdr encoding is done in encode_layoutcommit() directly into xdr buffer, these are the new commit stages: 1. On setup_layoutcommit, the range is adjusted as before and a structure is allocated for communication with bl_encode_layoutcommit && bl_cleanup_layoutcommit (Generic layer provides a void-star to hang it on) 2. bl_encode_layoutcommit is called to do the actual encoding directly into xdr. The commit-extent-list is not freed and is stored on above structure. FIXME: The code is not yet converted to the new XDR cleanup 3. On cleanup the commit-extent-list is put back by a call to set_to_rw() as before, but with no need for XDR decoding of the list as before. And the commit-extent-list is freed. Finally allocated structure is freed. [rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()] Signed-off-by:
Tao Guo <guotao@nrchpc.ac.cn> [pnfsblock: cleanup_layoutcommit wants a status parameter] Signed-off-by:
-
Fred Isaman authored
In blocklayout driver. There are two things happening while layoutcommit/cleanup. 1. the modified extents are encoded. 2. On cleanup the extents are put back on the layout rw extents list, for reads. In the new system where actual xdr encoding is done in encode_layoutcommit() directly into xdr buffer, these are the new commit stages: 1. On setup_layoutcommit, the range is adjusted as before and a structure is allocated for communication with bl_encode_layoutcommit && bl_cleanup_layoutcommit (Generic layer provides a void-star to hang it on) 2. bl_encode_layoutcommit is called to do the actual encoding directly into xdr. The commit-extent-list is not freed and is stored on above structure. FIXME: The code is not yet converted to the new XDR cleanup 3. On cleanup the commit-extent-list is put back by a call to set_to_rw() as before, but with no need for XDR decoding of the list as before. And the commit-extent-list is freed. Finally allocated structure is freed. [rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()] [pnfsblock: get rid of deprecated xdr macros] Signed-off-by:
-
Fred Isaman authored
Signed-off-by:
-
Fred Isaman authored
Adds working implementations of various support functions to handle INVAL extents, needed by writes, such as bl_mark_sectors_init and bl_is_sector_init. [pnfsblock: fix 64-bit compiler warnings for extent manipulation] Signed-off-by:
Zhang Jingwang <zhangjingwang@nrchpc.ac.cn> Signed-off-by:
-
Fred Isaman authored
Implement bl_find_get_extent(), one of the core extent manipulation routines. [pnfsblock: Lookup list entry of layouts and tags in reverse order] Signed-off-by:
-
Fred Isaman authored
XDR decodes the block layout payload sent in LAYOUTGET result, storing the result in an extent list. [pnfsblock: get rid of deprecated xdr macros] Signed-off-by:
-
Fred Isaman authored
Call GETDEVICELIST during mount, then call and parse GETDEVICEINFO for each device returned. [pnfsblock: get rid of deprecated xdr macros] Signed-off-by:
-
Fred Isaman authored
Replace a stub, so that extents underlying the layouts are properly added, merged, or ignored as necessary. Signed-off-by:
Mingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by:
-
Fred Isaman authored
Signed-off-by:
Zhang Jingwang <Jingwang.Zhang@emc.com> Signed-off-by:
-
Jim Rees authored
Signed-off-by:
-
Jim Rees authored
Signed-off-by:
-
Fred Isaman authored
Adds structures and basic create/delete code for extents. Signed-off-by:
-
Benny Halevy authored
[pnfsblock: use pnfs_generic_pg_init_read/write] Signed-off-by:
-
Fred Isaman authored
Define a configuration variable to enable/disable compilation of the block driver code. Add the minimal structure for a pnfs block layout driver, and empty list-heads that will hold the extent data [pnfsblock: make NFS_V4_1 select PNFS_BLOCK] Signed-off-by:
-
Andy Adamson authored
This gives layout driver a chance to cleanup structures they put in at encode_layoutcommit. Signed-off-by:
Andy Adamson <andros@netapp.com> [fixup layout header pointer for layoutcommit] Signed-off-by:
-
Fred Isaman authored
Block layout needs it to determine IO size. Signed-off-by:
Tao Guo <glorioustao@gmail.com> Signed-off-by:
-
Benny Halevy authored
To allow layout driver to issue getdevicelist at mount time, and clean up at umount time. [fixup non NFS_V4_1 set_pnfs_layoutdriver definition] [pnfs: pass mntfh down the init_pnfs path] Signed-off-by:
-
Andy Adamson authored
The block driver uses GETDEVICELIST Signed-off-by:
-
Peng Tao authored
Using NFS4_MAX_UINT64 will break current protocol. [Needed in v3.0] CC: Stable Tree <stable@kernel.org> Signed-off-by:
-
Peng Tao authored
There can be multiple lseg per file, so layoutcommit should be able to handle it. [Needed in v3.0] CC: Stable Tree <stable@kernel.org> Signed-off-by:
-
Peng Tao authored
No need to save it for every lseg. No need to save it at every pnfs_set_layoutcommit. [Needed in v3.0] CC: Stable Tree <stable@kernel.org> Signed-off-by:
-
Peng Tao authored
No need to save it for every lseg. [Needed in v3.0] CC: Stable Tree <stable@kernel.org> Signed-off-by:
-
- 30 Jul, 2011 2 commits
-
-
Bryan Schumaker authored
Print out the name of the file that triggers the cookie loop message to make it slightly easier to track down the cause. Signed-off-by:
Bryan Schumaker <bjschuma@netapp.com> Signed-off-by:
-
Trond Myklebust authored
If the directory contents change, then we have to accept that the file->f_pos value may shrink if we do a 'search-by-cookie'. In that case, we should turn off the loop detection and let the NFS client try to recover. The patch also fixes a second loop detection bug by ensuring that after turning on the ctx->duped flag, we read at least one new cookie into ctx->dir_cookie before attempting to match with ctx->dup_cookie. Reported-by:
Petr Vandrovec <petr@vandrovec.name> Cc: stable@kernel.org [2.6.39+] Signed-off-by:
-
- 25 Jul, 2011 4 commits
-
-
Trond Myklebust authored
nfs_mark_return_delegation() is usually called without any locking, and so it is not safe to dereference delegation->inode. Since the inode is only used to discover the nfs_client anyway, it makes more sense to have the callers pass a valid pointer to the nfs_server as a parameter. Reported-by:
Ian Kent <raven@themaw.net> Cc: stable@kernel.org Signed-off-by:
-
Jeff Layton authored
If the task that initiated the sillyrename ends up being killed by a fatal signal, then it will eventually return back to userspace and end up releasing the i_mutex. d_move however needs to be done while holding the i_mutex. Instead of using d_move here, just unhash the old and new dentries to prevent them from being found by lookups. With this change though, the dentries are now incorrect post-rename and do not reflect the actual name of the file on the server. I'm proceeding under the assumption that since they are unhashed that this isn't really a problem. In order for the sillydelete to still work though, the dname must be copied earlier when setting up the sillydelete info, and the name must be recopied if the sillydelete info has to be moved to a new dentry. Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
Steve Dickson authored
Our performance team has noticed that increasing RPCRDMA_MAX_DATA_SEGS from 8 to 64 significantly increases throughput when using the RDMA transport. Signed-off-by:
Steve Dickson <steved@redhat.com> Signed-off-by:
-
Stephen Rothwell authored
vfs/nfs: fixup for nfs_open_context change Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 24 Jul, 2011 8 commits
-
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (237 commits) ARM: 7004/1: fix traps.h compile warnings ARM: 6998/2: kernel: use proper memory barriers for bitops ARM: 6997/1: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM ARM: Fix build errors caused by adding generic macros ARM: CPU hotplug: ensure we migrate all IRQs off a downed CPU ARM: CPU hotplug: pass in proper affinity mask on IRQ migration ARM: GIC: avoid routing interrupts to offline CPUs ARM: CPU hotplug: fix abuse of irqdesc->node ARM: 6981/2: mmci: adjust calculation of f_min ARM: 7000/1: LPAE: Use long long printk format for displaying the pud ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state ARM: btc: avoid invalidating the branch target cache on kernel TLB maintanence ARM: ARM_DMA_ZONE_SIZE is no more ARM: mach-shark: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-sa1100: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-pxa: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-h720x: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size ...
-
Sasha Levin authored
Current documentation referred to the old method of handling augmented trees. Update documentation to correspond with the changes done in commit b945d6b2 ("rbtree: Undo augmented trees performance damage and regression"). Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: David Woodhouse <David.Woodhouse@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Lasse Collin authored
<linux/kernel.h> is needed for min_t. The old version happened to work on x86 because <asm/unaligned.h> indirectly includes <linux/kernel.h>, but it didn't work on ARM. <linux/kernel.h> includes <asm/byteorder.h> so it's not necessary to include it explicitly anymore. Signed-off-by:
Lasse Collin <lasse.collin@tukaani.org> Cc: stable <stable@kernel.org> Signed-off-by:
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (21 commits) [S390] use siginfo for sigtrap signals [S390] dasd: add enhanced DASD statistics interface [S390] kvm: make sigp emerg smp capable [S390] disable cpu measurement alerts on a dying cpu [S390] initial cr0 bits [S390] iucv cr0 enablement bit [S390] race safe external interrupt registration [S390] remove tape block docu [S390] ap: toleration support for ap device type 10 [S390] cleanup program check handler prototypes [S390] remove kvm mmu reload on s390 [S390] Use gmap translation for accessing guest memory [S390] use gmap address spaces for kvm guest images [S390] kvm guest address space mapping [S390] fix s390 assembler code alignments [S390] move sie code to entry.S [S390] kvm: handle tprot intercepts [S390] qdio: clear shared DSCI before scheduling the queue handler [S390] reference bit testing for unmapped pages [S390] irqs: Do not trace arch_local_{*,irq_*} functions ...
-
git://openrisc.net/jonas/linuxLinus Torvalds authored
* 'for-upstream' of git://openrisc.net/jonas/linux: (24 commits) OpenRISC: Add MAINTAINERS entry OpenRISC: Miscellaneous OpenRISC: Library routines OpenRISC: Headers OpenRISC: Traps OpenRISC: Module support OpenRISC: GPIO OpenRISC: Scheduling/Process management OpenRISC: Idle/Power management OpenRISC: System calls OpenRISC: IRQ OpenRISC: Timekeeping OpenRISC: DMA OpenRISC: PTrace OpenRISC: Build infrastructure OpenRISC: Signal handling OpenRISC: Memory management OpenRISC: Device tree OpenRISC: Boot code iomap: make IOPORT/PCI mapping functions conditional ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: modpost: Fix modpost's license checking V3 module: add /sys/module/<name>/uevent files module: change attr callbacks to take struct module_kobject modules: make arch's use default loader hooks modules: add default loader hook implementations param: fix return value handling in param_set_*
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
* 'kvm-updates/3.1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (143 commits) KVM: IOMMU: Disable device assignment without interrupt remapping KVM: MMU: trace mmio page fault KVM: MMU: mmio page fault support KVM: MMU: reorganize struct kvm_shadow_walk_iterator KVM: MMU: lockless walking shadow page table KVM: MMU: do not need atomicly to set/clear spte KVM: MMU: introduce the rules to modify shadow page table KVM: MMU: abstract some functions to handle fault pfn KVM: MMU: filter out the mmio pfn from the fault pfn KVM: MMU: remove bypass_guest_pf KVM: MMU: split kvm_mmu_free_page KVM: MMU: count used shadow pages on prepareing path KVM: MMU: rename 'pt_write' to 'emulate' KVM: MMU: cleanup for FNAME(fetch) KVM: MMU: optimize to handle dirty bit KVM: MMU: cache mmio info on page fault path KVM: x86: introduce vcpu_mmio_gva_to_gpa to cleanup the code KVM: MMU: do not update slot bitmap if spte is nonpresent KVM: MMU: fix walking shadow page table KVM guest: KVM Steal time registration ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xenLinus Torvalds authored
* 'upstream/xen-tracing2' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen/trace: use class for multicall trace xen/trace: convert mmu events to use DECLARE_EVENT_CLASS()/DEFINE_EVENT() xen/multicall: move *idx fields to start of mc_buffer xen/multicall: special-case singleton hypercalls xen/multicalls: add unlikely around slowpath in __xen_mc_entry() xen/multicalls: disable MC_DEBUG xen/mmu: tune pgtable alloc/release xen/mmu: use extend_args for more mmuext updates xen/trace: add tlb flush tracepoints xen/trace: add segment desc tracing xen/trace: add xen_pgd_(un)pin tracepoints xen/trace: add ptpage alloc/release tracepoints xen/trace: add mmu tracepoints xen/trace: add multicall tracing xen/trace: set up tracepoint skeleton xen/multicalls: remove debugfs stats trace/xen: add skeleton for Xen trace events
-
