The low-level interrupt handler on s390 checks for _TIF_WORK_INT and
exits the guest context, if work is pending.
TIF_WORK_INT is defined as_TIF_SIGPENDING | _TIF_NEED_RESCHED |
 _TIF_MCCK_PENDING. Currently the sie loop checks for signals and
reschedule, but it does not check for machine checks. That means that
we exit the guest context if a machine check is pending, but we do not
handle the machine check.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

There are potential locking problem in enable_sie. We take the task_lock
and the mmap_sem. As exit_mm uses the same locks vice versa, this triggers
a lockdep warning.
The second problem is that dup_mm and mmput might sleep, so we must not
hold the task_lock at that moment.

The solution is to dup the mm unconditional and use the task_lock before and
afterwards to check  if we can use the new mm. dup_mm and mmput are called
outside the task_lock, but we run update_mm while holding the task_lock,
protection us against ptrace.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

diag 0x44 is the common way on s390 to yield the cpu to the hypervisor.
It is called by the guest in cpu_relax and in the spinlock code to
yield to other guest cpus.

This semantic is similar to yield. Lets replace the call to schedule with
yield to make sure that current is really yielding.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

The hypercall instructions on Intel and AMD are different.  KVM allows the
guest to choose one or the other (the default is Intel), and if the guest
chooses incorrectly, KVM will patch it at runtime to select the correct
instruction.  This allows live migration between Intel and AMD machines.

This patching occurs in the x86 emulator.  The current code also executes
the hypercall.  Unfortunately, the tail end of the x86 emulator code also
executes, overwriting the return value of the hypercall with the original
contents of rax (which happens to be the hypercall number).

Fix not by executing the hypercall in the emulator context; instead let the
guest reissue the patched instruction and execute the hypercall via the
normal path.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Only copy in the data actually requested by the instruction emulation
and zero pad the destination register first. This avoids the problem
where emulated mmio access got garbled data from ld2.acq instructions
in the vga console driver.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] pxa: fix tosa.c build error
  [ARM] 5067/1: _raw_write_can_lock macro bugfix
  [ARM] 5070/1: pxa: add GPIO104_PSKTSEL to pxa27x MFP configuration
  [ARM] 5068/1: PXA2xx Additional gpio definitions
  [ARM] 5066/2: EM-X270: Fix DM9000 IRQ flags initialisation
  [ARM] 5065/2: CM-X270: Fix DM9000 IRQ flags initialisation
  [ARM] 5062/1: pxa: remove unused definition of CONFIG_ARCH_COTULLA_IDP
  [ARM] 5060/1: remove unnecessary include of asm/io.h
  [ARM] fix AT91 include loops

Fairly simple. "dev_use" was being allocated as a zero length array
because of bad math on 64-bit systems, causing a crash in
find_first_zero_bit(). One-liner follows:
Signed-off-by: Ben Collins <ben.collins@canonical.com>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (48 commits)
  V4L/DVB (8001): dib0070: fix dib0070_attach when !CONFIG_DVB_TUNER_DIB0070
  V4L/DVB (8000): tda827x: fix NULL pointer in tda827xa_lna_gain
  V4L/DVB (7990): Fix entry for PowerColor RA 330 and make it run with firmware version 2.7
  V4L/DVB (7983): tda18271_calc_rf_cal must return the return value of tda18271_lookup_map
  V4L/DVB (7978): cx18: explicitly test for XC2028 tuner
  V4L/DVB (7977): cx18: fix init order and remove duplicate open_on_first_use.
  V4L/DVB (7975): saa7134_empress
  V4L/DVB (7974): fix MEDIA_TUNER && FW_LOADER build error
  V4L/DVB (7972): or51132.c: unaligned
  V4L/DVB (7971): usb: unaligned
  V4L/DVB (7970): mix trivial endianness annotations
  V4L/DVB (7969): m920x: unaligned access
  V4L/DVB (7968): zoran: endianness annotations
  V4L/DVB (7967): bt8xx: unaligned access
  V4L/DVB (7966): cx18: direct dereferencing of iomem
  V4L/DVB (7965): annotate bcx_riscmem
  V4L/DVB (7964): cx18 iomem annotations
  V4L/DVB (7963): ivtv: trivial annotations
  V4L/DVB (7962): ttusb endianness annotations and fixes
  V4L/DVB (7961): fix endianness bug in dib0700_devices.c
  ...

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  Fix divide by zero error in build_clear_page() and build_copy_page()
  [MIPS] Fix typo in header guard
  [MIPS] Fix build error - Delete debugging crap that crept in with CMP
  [MIPS] Add accessors for random register.
  [MIPS] IP27: misc fixes
  [MIPS] IP27: Fix clockevent setup
  [MIPS] IP27: Fix bootmem memory setup
  [MIPS] remove CONFIG_CPU_R4000 line from Makefile
  [MIPS] Fix check for valid stack pointer during backtrace
  [MIPS] Add missing braces to pte_mkyoung
  [MIPS] R4700: Fix build_tlb_probe_entry
  [MIPS] Alchemy: dbdma: add API to delete custom DDMA device ids.
  [MIPS] Alchemy: export get_au1x00_speed for modules

* git://git.infradead.org/~dwmw2/mtd-2.6.26:
  [MTD] [MAPS] Fix cmdlineparse handling in mapping files
  [MTD] [NAND] pxa: fix incorrect calling of pxa3xx_nand_config() on resume path

Suggest how to deal with patch modifications caused by
merging or back-porting when you're a maintainer.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

- Don't trust a length which is greater than the working buffer.
  An invalid length could cause overflow when calculating buffer size
  for decoding oid.

- An oid length of zero is invalid and allows for an off-by-one error when
  decoding oid because the first subid actually encodes first 2 subids.

- A primitive encoding may not have an indefinite length.

Thanks to Wei Wang from McAfee for report.

Cc: Steven French <sfrench@us.ibm.com>
Cc: stable@kernel.org
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Alias brd to rd in the hope of helping legacy users. Suggested by Jan.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Here is an attempt to translate the prompt and help text into something
which is legible and, as a bonus, correct.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ip_fast_csum() requires a memory clobber on its inline asm as it accesses
memory in a fashion that gcc can't predict.

The GCC manual says:

 If your assembler instructions access memory in an unpredictable
 fashion, add `memory' to the list of clobbered registers.  This will
 cause GCC to not keep memory values cached in registers across the
 assembler instruction and not optimize stores or loads to that memory.

The bug hasn't been noticed in FRV, but it has been seen in PA-RISC.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We don't need to reserve "unset" resources.  Trying to reserve
them results in messages like this, which are ugly but harmless:

    system 00:08: iomem range 0x0-0x0 could not be reserved

Future PNP patches will remove use of IORESOURCE_UNSET, but
we still need it for now.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

- fix PCI interrupt assignment by emulating ioc3 interrupt pin register
- use pci_probe_only mode
- select correct page size in bridge
- remove no longer needed ioc3_sio_init() code

[Ralf: Fix for 64kB or larger pagesizes]
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Fix breakage introduced by converting hub_rt to clockevent.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Changes in the generic bootmem code broke memory setup for IP27. This
patch fixes this by replacing lots of special IP27 code with generic
bootmon code. This has been tested only on a single node.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The existing options are named CONFIG_CPU_R4300 and CONFIG_CPU_R4X00,
and they are directly below.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The newly added check for valid stack pointer address breaks at least for
64bit kernels.  Use __get_user() for accessing stack content to avoid crashes,
when doing the backtrace.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Only the version pte_mkyoung for 36-bit pagetables on 32-bit hw was
affected and with this bug being around since November 29, 2004 there
is evidence to suport the assumption it was benign ;-)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Treat R4700 like R4600 in build_tlb_probe_entry. Without this fix kernel
will lock up.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add API to delete custom DDMA device ids create with
au1xxx_ddma_device_add().
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

au1xmmc.c driver depends on it, so export it for modules.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Fix G5 SATA irq 18: nobody cared, reported on -rc5 by Olaf Hering:
fixlet to a57c1bad libata-sff:
Fix oops reported in kerneloops.org for pnp devices with no ctl
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Tested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Check that tda827x_config is defined before attempting to use it.
Signed-off-by: Sigmund Augdal <sigmund@snap.tv>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

On the TDA18271HD/C1, we perform RF tracking filter correction for VHF low
band, only. If supplied a frequency out of range, the error must be returned
to the caller (tda18271c1_rf_tracking_filter_calibration) so that it can
decide whether or not to write to register EB14, RFC_CPROG[7:0]
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Testing whether xceive_pin is non-zero is not good enough as 0 is a valid
value. Instead explicitly test whether the Xceive tuner is used.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

This is patch for fix data structure in querycap syscall.
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

-tip testing found the following build failure:

  LD      .tmp_vmlinux1
  drivers/built-in.o: In function `generic_set_freq':
  tuner-xc2028.c:(.text+0xbd896): undefined reference to `request_firmware'
  tuner-xc2028.c:(.text+0xbdd7a): undefined reference to `release_firmware'
  drivers/built-in.o: In function `xc_load_fw_and_init_tuner':
  xc5000.c:(.text+0xc68e6): undefined reference to `request_firmware'
  xc5000.c:(.text+0xc6abe): undefined reference to `release_firmware'

with this config:

  http://redhat.com/~mingo/misc/config-Tue_May_20_18_11_34_CEST_2008.bad

the reason is another kconfig tool bug that has to be worked around in
the driver's Kconfig file: if FW_LOADER is selected in a second
dependency, that is not properly propagated up the dependencies.

in this case, FW_LOADER is selected from MEDIA_TUNER_XC2028:

  config MEDIA_TUNER_XC2028
        tristate "XCeive xc2028/xc3028 tuners"
        depends on VIDEO_MEDIA && I2C
        depends on HOTPLUG
        select FW_LOADER

which got selected by MEDIA_TUNER:

  config MEDIA_TUNER
        tristate
        default VIDEO_MEDIA && I2C
        depends on VIDEO_MEDIA && I2C
        select FW_LOADER if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG

but the kconfig tool did not pick up this second-order dependency and
allowed CONFIG_FW_LOADER=m to be selected - in which case the build
fails.

the workaround i found was to move the select of FW_LOADER one level up,
so that the buggy kconfig tool can notice it and can act appropriately.
This problem can probably be worked around in other ways as well, i went
for the minimal fix.

Obviously, the kconfig tool should be fixed, it is not reasonable to
expect driver authors to do manual dependency resolution (that kconfig
itself already does) and uglify the Kconfig files. The kconfig tool did
nothing to warn about this situation and did not prevent this faulty
.config from being constructed.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>