If we don't have access to the new User GTS (T5+), use the old doorbell
mechanism; otherwise use the new BAR2 mechanism.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently "ALU_END_FROM_BE 32" and "ALU_END_FROM_LE 32" do not test if
the upper bits of the result are zeros (the arm64 JIT had such bugs).
Extend the two tests to catch this.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
Cleanup, T6 changes and register range update

This patch series adds the following:
Don't use entire L2T table, update register ranges for T6 adapter,
read stats for only available channels for T6 and enable cim_la dump for
T6 adapter also.

This patch series has been created against net-next tree and includes
patches on cxgb4 driver.

We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
====================
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Updating the driver to read the stats of only available channels. T6 and
later has only 2 channels
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver was retrieving the parameters for the bounds of its
slice of the L2T from the firmware and then throwing those away and
using the entire table. This corrects that problem.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use module_pci_driver for drivers whose init and exit functions
only register and unregister, respectively.

A simplified version of the Coccinelle semantic patch that performs
this transformation is as follows:

@A@
identifier f, x;
@@
-static f(...) { return pci_register_driver(&x); }

@b depends on a@
identifier e, a.x;
@@
-static e(...) { pci_unregister_driver(&x); }

@c depends on a && b@
identifier a.f;
declarer name module_init;
@@
-module_init(f);

@d depends on a && b && c@
identifier b.e, a.x;
declarer name module_exit;
declarer name module_pci_driver;
@@
-module_exit(e);
+module_pci_driver(x);
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When packet encapsulation is in use, the MTU needs to be reduced for
headroom reservation.
The existing code takes the updated MTU value only from the host side.
But vSwitch extensions, such as Open vSwitch, require the flexibility
to change the MTU to different values from within a guest during the
lifecycle of a vNIC, when the encapsulation protocol is changed. The
patch supports this kind of MTU changes.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add multiqueue capabilities to ifb netdevice.

This removes last bottleneck for ingress when mq qdisc can be used
to shard load from multiple RX queues on physical device.

Tested:

# netem based setup, installed at receiver side
ETH=eth0
IFB=ifb10
EST="est 1sec 4sec" # Optional rate estimator
RTT_HALF=2ms
#REORDER=20us
#LOSS="loss 1"
TXQ=8

ip link add ifb10 numtxqueues $TXQ type ifb
ip link set dev $IFB up

tc qdisc add dev $ETH ingress 2>/dev/null

tc filter add dev $ETH parent ffff: \
   protocol ip u32 match u32 0 0 flowid 1:1 \
	action mirred egress redirect dev $IFB

tc qdisc del dev $IFB root 2>/dev/null

tc qdisc add dev $IFB root handle 1: mq
for i in `seq 1 $TXQ`
do
 slot=$( printf %x $(( i )) )
 tc qd add dev $IFB parent 1:$slot $EST netem \
	limit 100000 delay $RTT_HALF $REORDER $LOSS
done

lpaa24:~# tc -s -d qd sh dev ifb10
qdisc mq 1: root
 Sent 316544766 bytes 5265927 pkt (dropped 0, overlimits 0 requeues 0)
 backlog 98880b 1648p requeues 0
qdisc netem 8002: parent 1:1 limit 100000 delay 2.0ms
 Sent 39601416 bytes 658721 pkt (dropped 0, overlimits 0 requeues 0)
 rate 38235Kbit 79657pps backlog 12240b 204p requeues 0
qdisc netem 8003: parent 1:2 limit 100000 delay 2.0ms
 Sent 39472866 bytes 657227 pkt (dropped 0, overlimits 0 requeues 0)
 rate 38234Kbit 79655pps backlog 10620b 176p requeues 0
qdisc netem 8004: parent 1:3 limit 100000 delay 2.0ms
 Sent 39703417 bytes 659699 pkt (dropped 0, overlimits 0 requeues 0)
 rate 38320Kbit 79831pps backlog 12780b 213p requeues 0
qdisc netem 8005: parent 1:4 limit 100000 delay 2.0ms
 Sent 39565149 bytes 658011 pkt (dropped 0, overlimits 0 requeues 0)
 rate 38174Kbit 79530pps backlog 11880b 198p requeues 0
qdisc netem 8006: parent 1:5 limit 100000 delay 2.0ms
 Sent 39506078 bytes 657354 pkt (dropped 0, overlimits 0 requeues 0)
 rate 38195Kbit 79571pps backlog 12480b 208p requeues 0
qdisc netem 8007: parent 1:6 limit 100000 delay 2.0ms
 Sent 39675994 bytes 658849 pkt (dropped 0, overlimits 0 requeues 0)
 rate 38323Kbit 79838pps backlog 12600b 210p requeues 0
qdisc netem 8008: parent 1:7 limit 100000 delay 2.0ms
 Sent 39532042 bytes 658367 pkt (dropped 0, overlimits 0 requeues 0)
 rate 38177Kbit 79536pps backlog 13140b 219p requeues 0
qdisc netem 8009: parent 1:8 limit 100000 delay 2.0ms
 Sent 39488164 bytes 657705 pkt (dropped 0, overlimits 0 requeues 0)
 rate 38192Kbit 79568pps backlog 13Kb 222p requeues 0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add extra check for total vfs for SRIOV to check if that value is
bigger than total vfs in pci SRIOV capabalities. Fix a check and
print of the number of maximum vfs that hw can handle. Fix a check
and print of the number of maximum vfs per port that driver can handle.
Signed-off-by: Carol L Soto <clsoto@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The trace bpf samples do not compile on s390x because they use x86
specific fields from the "pt_regs" structure.

Fix this and access the fields via new PT_REGS macros.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable SG support for Zynq SOC family devices.
Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two duplicated xenvif_zerocopy_callback() definitions.
Remove one of them.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
net_sched: act: lockless operation

As mentioned by Alexei last week in Budapest, it is a bit weird
to take a spinlock in order to drop a packet in a tc filter...

Lets add percpu infra for tc actions and use it for gact & mirred.

Before changes, my host with 8 RX queues was handling 5 Mpps with gact,
and more than 11 Mpps after.

Mirred change is not yet visible if ifb+qdisc is used, as ifb is
not yet multi queue enabled, but is a step forward.
====================
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Like act_gact, act_mirred can be lockless in packet processing

1) Use percpu stats
2) update lastuse only every clock tick to avoid false sharing
3) use rcu to protect tcfm_dev
4) Remove spinlock usage, as it is no longer needed.

Next step : add multi queue capability to ifb device
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Final step for gact RCU operation :

1) Use percpu stats
2) update lastuse only every clock tick to avoid false sharing
3) Remove spinlock acquisition, as it is no longer needed.

Since this is the last contended lock in packet RX when tc gact is used,
this gives impressive gain.

My host with 8 RX queues was handling 5 Mpps before the patch,
and more than 11 Mpps after patch.

Tested:

On receiver :

dev=eth0
tc qdisc del dev $dev ingress 2>/dev/null
tc qdisc add dev $dev ingress
tc filter del dev $dev root pref 10 2>/dev/null
tc filter del dev $dev pref 10 2>/dev/null
tc filter add dev $dev est 1sec 4sec parent ffff: protocol ip prio 1 \
	u32 match ip src 7.0.0.0/8 flowid 1:15 action drop

Sender sends packets flood from 7/8 network
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Third step for gact RCU operation :

Following patch will get rid of spinlock protection,
so we need to read tcfg_ptype once.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Second step for gact RCU operation :

We want to get rid of the spinlock protecting gact operations.
Stats (packets/bytes) will soon be per cpu.

gact_determ() would not work without a central packet counter,
so lets add it for this mode.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

First step for gact RCU operation :

Instead of testing if tcfg_pval is zero or not, just make it 1.

No change in behavior, but slightly faster code.

The smp_rmb()/smp_wmb() barriers, while not strictly needed at this
stage are added for upcoming spinlock removal.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reuse existing percpu infrastructure John Fastabend added for qdisc.

This patch adds a new cpustats parameter to tcf_hash_create() and all
actions pass false, meaning this patch should have no effect yet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qdisc_bstats_update_cpu() and other helpers were added to support
percpu stats for qdisc.

We want to add percpu stats for tc action, so this patch add common
helpers.

qdisc_bstats_update_cpu() is renamed to qdisc_bstats_cpu_update()
qdisc_qstats_drop_cpu() is renamed to qdisc_qstats_cpu_drop()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mellanox driver has the knowledge if rxhash is a L4 hash,
if it receives a non fragmented TCP or UDP frame and
NETIF_F_RXCSUM is enabled on netdev.

ip_summed value is CHECKSUM_UNNECESSARY in this case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Amir Vadai <amirv@mellanox.com>
Cc: Ido Shamay <idos@mellanox.com>
Acked-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yuchung Cheng says:

====================
tcp: reducing lost retransmits in recovery

This patch series reduces lost retransmits in recovery, in particular
when dealing with traffic policers. The main problem is that
slow start in recovery under policing can cause massive lost and
retransmit storms: any excess sending rate turns into drops. The
solution is to avoid doing slow start when lost retransmit is
detected and use packet conservation instead.

On networks with traffic policers the patches have lowered the
TCP loss rates by ~20% from Google servers without latency regressions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

PRR slow start is often too aggressive especially when drops are
caused by traffic policers. The policers mainly use token bucket
to enforce the rate so sending (twice) faster than the delivery
rate causes excessive drops.

This patch changes PRR to the conservative reduction bound
(CRB) mode in RFC 6937 by default. CRB follows the packet
conservation rule to send at most the delivery rate by default.

But if many packets are lost and the pipe is empty, CRB may take N
round trips to repair N losses. We conditionally turn on slow start
mode if all these conditions are made to speed up the recovery:

  1) on the second round or later in recovery
  2) retransmission sent in the previous round is delivered on this ACK
  3) no retransmission is marked lost on this ACK

By using packet conservation by default, this change reduces the loss
retransmits signicantly on networks that deploy traffic policers,
up to 20% reduction of overall loss rate.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Nandita Dukkipati <nanditad@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the retransmission in CA_Loss is lost again, we should not
continue to slow start or raise cwnd in congestion avoidance mode.
Instead we should enter fast recovery and use PRR to reduce cwnd,
following the principle in RFC5681:

"... or the loss of a retransmission, should be taken as two
 indications of congestion and, therefore, cwnd (and ssthresh) MUST
 be lowered twice in this case."

This is especially important to reduce loss when the CA_Loss
state was caused by a traffic policer dropping the entire inflight.
The CA_Loss state has a problem where a loss of L packets causes the
sender to send a burst of L packets. So a policer that's dropping
most packets in a given RTT can cause a huge retransmit storm. By
contrast, PRR includes logic to bound the number of outbound packets
that result from a given ACK. So switching to CA_Recovery on lost
retransmits in CA_Loss avoids this retransmit storm problem when
in CA_Loss.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Nandita Dukkipati <nanditad@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Part of commit 49aa284fe64c4c1 ("cxgb4: Add support for devlog")
change introduced a real bug where the Device Log Sequence Numbers are
no longer being converted from firmware Big-Endian to local CPU-Endian
format.

This patch moves all of the translation into the devlog_show() routine.
The only endianness code now in devlog_open() is the small loop to find the
earliest (lowest Sequence Number) Device Log entry in the circular buffer.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before commit daad1512 ("ipv6: Make ipv6_is_mld() inline and use it
from ip6_mc_input().") MLD packets were only processed locally. After the
change, a copy of MLD packet goes through ip6_mr_input, causing
MRT6MSG_NOCACHE message to be generated to user space.

Make MLD packet only processed locally.

Fixes: daad1512 ("ipv6: Make ipv6_is_mld() inline and use it from ip6_mc_input().")
Signed-off-by: Hermin Anggawijaya <hermin.anggawijaya@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

The module_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The module_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The free_percpu() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vlan ids 0 and 4095 were disallowed by commit:
8adff41c ("bridge: Don't use VID 0 and 4095 in vlan filtering")
but then the check was removed when vlan ranges were introduced by:
bdced7ef ("bridge: support for multiple vlans and vlan ranges in setlink and dellink requests")
So reintroduce the vlan range check.
Before patch:
[root@testvm ~]# bridge vlan add vid 0 dev eth0 master
(succeeds)
After Patch:
[root@testvm ~]# bridge vlan add vid 0 dev eth0 master
RTNETLINK answers: Invalid argument
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: bdced7ef ("bridge: support for multiple vlans and vlan ranges in setlink and dellink requests")
Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Johan Hedberg says:

====================
pull request: bluetooth 2015-07-02

A couple of regressions crept in because of a patch to use proper list
APIs rather than manually reading & writing the next/prev pointers
(commit 835a6a2f). Turns out this was
masking a few bugs: a missing INIT_LIST_HEAD() call and incorrectly
using list_del() rather than list_del_init(). The two patches in this
set fix these, and it'd be nice they could still make it to 4.2-rc1 to
avoid new bug reports from users.

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In enic_poll, we clean tx and rx queues, when low latency busy socket polling
is happening, enic_poll will only clean tx queue. After cleaning tx, it should
return total budget for re-poll.

There is a small window between vnic_intr_unmask() and enic_poll_unlock_napi().
In this window if an irq occurs and napi is scheduled on different cpu, it tries
to acquire enic_poll_lock_napi() and fails. Unlock napi_poll before unmasking
the interrupt.

v2:
Do not change tx wonk done behaviour. Consider only rx work done for completing
napi.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull init.h/module.h fragility fixes from Paul Gortmaker:
 "Fixup various init.h misuses that are fragile wrt code moving to
  module.h

  What started as a removal of no longer required include <linux/init.h>
  due to the earlier __cpuinit and __devinit removal led to the
  observation that some module specfic support was living in init.h
  itself, thus preventing the full removal from introducing compile
  regressions.

  This series includes a few final fixups needed prior to the relocation
  of the modular init code from <init.h> to <module.h>.  These are
  things that weren't easily categorized into any of the other previous
  series categories already requested for pull.

  That said, each fixup branch (including this one) is independent and
  there are no ordering constraints.  Only the final code relocation
  (which is NOT in this pull) requires that all my cleanup branches be
  merged first"

* tag 'module-misc-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  tile: add init.h to usb.c to avoid compile failure
  arm: fix implicit #include <linux/init.h> in entry asm.
  x86: replace __init_or_module with __init in non-modular vsmp_64.c

Merge tag 'module-builtin_driver-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull module_platform_driver replacement from Paul Gortmaker:
 "Replace module_platform_driver with builtin_platform driver in non
  modules.

  We see an increasing number of non-modular drivers using
  modular_driver() type register functions.  There are several downsides
  to letting this continue unchecked:

   - The code can appear modular to a reader of the code, and they won't
     know if the code really is modular without checking the Makefile
     and Kconfig to see if compilation is governed by a bool or
     tristate.

   - Coders of drivers may be tempted to code up an __exit function that
     is never used, just in order to satisfy the required three args of
     the modular registration function.

   - Non-modular code ends up including the <module.h> which increases
     CPP overhead that they don't need.

   - It hinders us from performing better separation of the module init
     code and the generic init code.

  So here we introduce similar macros for builtin drivers.  Then we
  convert builtin drivers (controlled by a bool Kconfig) by making the
  following type of mapping:

    module_platform_driver()       --->  builtin_platform_driver()
    module_platform_driver_probe() --->  builtin_platform_driver_probe().

  The set of drivers that are converted here are just the ones that
  showed up as relying on an implicit include of <module.h> during a
  pending header cleanup.  So we convert them here vs adding an include
  of <module.h> to non-modular code to avoid compile fails.  Additonal
  conversions can be done asynchronously at any time.

  Once again, an unused module_exit function that is removed here
  appears in the diffstat as an outlier wrt all the other changes"

* tag 'module-builtin_driver-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  drivers/clk: convert sunxi/clk-mod0.c to use builtin_platform_driver
  drivers/power: Convert non-modular syscon-reboot to use builtin_platform_driver
  drivers/soc: Convert non-modular soc-realview to use builtin_platform_driver
  drivers/soc: Convert non-modular tegra/pmc to use builtin_platform_driver
  drivers/cpufreq: Convert non-modular s5pv210-cpufreq.c to use builtin_platform_driver
  drivers/cpuidle: Convert non-modular drivers to use builtin_platform_driver
  drivers/platform: Convert non-modular pdev_bus to use builtin_platform_driver
  platform_device: better support builtin boilerplate avoidance

Merge tag 'module_init-alternate_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull module_init replacement part two from Paul Gortmaker:
 "Replace module_init with appropriate alternate initcall in non
  modules.

  This series converts non-modular code that is using the module_init()
  call to hook itself into the system to instead use one of our
  alternate priority initcalls.

  Unlike the previous series that used device_initcall and hence was a
  runtime no-op, these commits change to one of the alternate initcalls,
  because (a) we have them and (b) it seems like the right thing to do.

  For example, it would seem logical to use arch_initcall for arch
  specific setup code and fs_initcall for filesystem setup code.

  This does mean however, that changes in the init ordering will be
  taking place, and so there is a small risk that some kind of implicit
  init ordering issue may lie uncovered.  But I think it is still better
  to give these ones sensible priorities than to just assign them all to
  device_initcall in order to exactly preserve the old ordering.

  Thad said, we have already made similar changes in core kernel code in
  commit c96d6660 ("kernel: audit/fix non-modular users of
  module_init in core code") without any regressions reported, so this
  type of change isn't without precedent.  It has also got the same
  local testing and linux-next coverage as all the other pull requests
  that I'm sending for this merge window have got.

  Once again, there is an unused module_exit function removal that shows
  up as an outlier upon casual inspection of the diffstat"

* tag 'module_init-alternate_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  x86: perf_event_intel_pt.c: use arch_initcall to hook in enabling
  x86: perf_event_intel_bts.c: use arch_initcall to hook in enabling
  mm/page_owner.c: use late_initcall to hook in enabling
  lib/list_sort: use late_initcall to hook in self tests
  arm: use subsys_initcall in non-modular pl320 IPC code
  powerpc: don't use module_init for non-modular core hugetlb code
  powerpc: use subsys_initcall for Freescale Local Bus
  x86: don't use module_init for non-modular core bootflag code
  netfilter: don't use module_init/exit in core IPV4 code
  fs/notify: don't use module_init for non-modular inotify_user code
  mm: replace module_init usages with subsys_initcall in nommu.c

Merge tag 'module_init-device_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull module_init replacement part one from Paul Gortmaker:
 "Replace module_init with equivalent device_initcall in non modules.

  This series of commits converts non-modular code that is using the
  module_init() call to hook itself into the system to instead use
  device_initcall().

  The conversion is a runtime no-op, since module_init actually becomes
  __initcall in the non-modular case, and that in turn gets mapped onto
  device_initcall.  A couple files show a larger negative diffstat,
  representing ones that had a module_exit function that we remove here
  vs previously relying on the linker to dispose of it.

  We make this conversion now, so that we can relocate module_init from
  init.h into module.h in the future.

  The files changed here are just limited to those that would otherwise
  have to add module.h to obviously non-modular code, in order to avoid
  a compile fail, as testing has shown"

* tag 'module_init-device_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  MIPS: don't use module_init in non-modular cobalt/mtd.c file
  drivers/leds: don't use module_init in non-modular leds-cobalt-raq.c
  cris: don't use module_init for non-modular core eeprom.c code
  tty/metag_da: Avoid module_init/module_exit in non-modular code
  drivers/clk: don't use module_init in clk-nomadik.c which is non-modular
  xtensa: don't use module_init for non-modular core network.c code
  sh: don't use module_init in non-modular psw.c code
  mn10300: don't use module_init in non-modular flash.c code
  parisc64: don't use module_init for non-modular core perf code
  parisc: don't use module_init for non-modular core pdc_cons code
  cris: don't use module_init for non-modular core intmem.c code
  ia64: don't use module_init in non-modular sim/simscsi.c code
  ia64: don't use module_init for non-modular core kernel/mca.c code
  arm: don't use module_init in non-modular mach-vexpress/spc.c code
  powerpc: don't use module_init in non-modular 83xx suspend code
  powerpc: use device_initcall for registering rtc devices
  x86: don't use module_init in non-modular devicetree.c code
  x86: don't use module_init in non-modular intel_mid_vrtc.c

Pull implicit module.h fixes from Paul Gortmaker:
 "Fix up implicit <module.h> users that will break later.

  The files changed here are simply modular source files that are
  implicitly relying on <module.h> being present.  We fix them up now,
  so that we can decouple some of the module related init code from the
  core init code in the future.

  The addition of the module.h include to several files here is also a
  no-op from a code generation point of view, else there would already
  be compile issues with these files today.

  There may be lots more implicit includes of <module.h> in tree, but
  these are the ones that extensive build test coverage has shown that
  must be fixed in order to avoid build breakage fallout for the pending
  module.h <---> init.h code relocation we desire to complete"

* tag 'module-implicit-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  frv: add module.h to mb93090-mb00/flash.c to avoid compile fail
  drivers/cpufreq: include <module.h> for modular exynos-cpufreq.c code
  drivers/staging: include <module.h> for modular android tegra_ion code
  crypto/asymmetric_keys: pkcs7_key_type needs module.h
  sh: mach-highlander/psw.c is tristate and should use module.h
  drivers/regulator: include <module.h> for modular max77802 code
  drivers/pcmcia: include <module.h> for modular xxs1500_ss code
  drivers/hsi: include <module.h> for modular omap_ssi code
  drivers/gpu: include <module.h> for modular rockchip code
  drivers/gpio: include <module.h> for modular crystalcove code
  drivers/clk: include <module.h> for clk-max77xxx modular code