The function name does not distinguish it from xen_allocate_pirq_msi
(which operates on domU and pvhvm domains rather than dom0).

Hoist domain 0 specific functionality up into the only caller leaving
functionality common to all guest types in xen_bind_pirq_msi_to_irq.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Makes the tail end of this function look even more like
xen_bind_pirq_msi_to_irq.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

I don't think this was a deliberate ommision.

Makes the tail end of this function look even more like
xen_bind_pirq_msi_to_irq.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Calling PHYSDEVOP_map_pirq earlier simplifies error handling and
starts to make the tail end of this function look like
xen_bind_pirq_msi_to_irq.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Split the binding aspect of xen_allocate_pirq_msi out into a new
xen_bind_pirq_to_irq function.

In xen_hvm_setup_msi_irq when allocating a pirq write the MSI message
to signal the PIRQ as soon as the pirq is obtained. There is no way to
free the pirq back so if the subsequent binding to an IRQ fails we
want to ensure that we will reuse the PIRQ next time rather than leak
it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The find_unbound_pirq is called only from xen_allocate_pirq_msi and
only if alloc_pirq is true. The only caller which does this is
xen_hvm_setup_msi_irqs. The use of this function is gated, in
pci_xen_hvm_init, on XENFEAT_hvm_pirqs.

The PHYSDEVOP_get_free_pirq interfaces was added to the hypervisor in
22410:be96f6058c05 while XENFEAT_hvm_pirqs was added a couple of
minutes prior in 22409:6663214f06ac. Therefore we do not need to
concern ourselves with hypervisors which support XENFEAT_hvm_pirqs but
not PHYSDEVOP_get_free_pirq.

This eliminates the fallback path in find_unbound_pirq which walks to
pirq_to_irq array looking for a free pirq. Unlike the
PHYSDEVOP_get_free_pirq interface this fallback only looks up a free
pirq but does not reserve it. Removing this fallback will simplify
locking in the future.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

apic_register_gsi_xen_hvm is a tiny wrapper around
xen_hvm_register_pirq.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

consistent with other similar functions.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

All callers pass this flag so it is pointless.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: xen-devel@lists.xensource.com
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Fixes:
 CC      arch/x86/pci/xen.o
arch/x86/pci/xen.c:183: warning: 'xen_initdom_setup_msi_irqs' defined but not used
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

* stable/pcifront-fixes:
  pci/xen: When free-ing MSI-X/MSI irq->desc also use generic code.
  pci/xen: Cleanup: convert int** to int[]
  pci/xen: Use xen_allocate_pirq_msi instead of xen_allocate_pirq
  xen-pcifront: Sanity check the MSI/MSI-X values
  xen-pcifront: don't use flush_scheduled_work()

* stable/irq.rework:
  xen/irq: Cleanup up the pirq_to_irq for DomU PV PCI passthrough guests as well.
  xen: Use IRQF_FORCE_RESUME
  xen/timer: Missing IRQF_NO_SUSPEND in timer code broke suspend.
  xen: Fix compile error introduced by "switch to new irq_chip functions"
  xen: Switch to new irq_chip functions
  xen: Remove stale irq_chip.end
  xen: events: do not free legacy IRQs
  xen: events: allocate GSIs and dynamic IRQs from separate IRQ ranges.
  xen: events: add xen_allocate_irq_{dynamic, gsi} and xen_free_irq
  xen:events: move find_unbound_irq inside CONFIG_PCI_MSI
  xen: handled remapped IRQs when enabling a pcifront PCI device.
  genirq: Add IRQF_FORCE_RESUME

We only did this for PV guests that are xen_initial_domain() but
there is not reason not to do this for other cases. The other
case is only exercised when you pass in a PCI device to a PV guest
_and_ the device in question.
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Mark the IRQF_NO_SUSPEND interrupts IRQF_FORCE_RESUME and remove the extra
walk through the interrupt descriptors.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Merge branch 'irq/for-xen' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip into HEAD

* 'irq/for-xen' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Add IRQF_FORCE_RESUME

The patches missed an indirect use of IRQF_NO_SUSPEND pulled in via
IRQF_TIMER. The following patch fixes the issue.

With this fixlet PV guest migration works just fine. I also booted the
entire series as a dom0 kernel and it appeared fine.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

drivers/xen/events.c: In function 'ack_pirq':
drivers/xen/events.c:568: error: implicit declaration of function 'irq_move_irq'
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Convert Xen to the new irq_chip functions. Brings us closer to enable
CONFIG_GENERIC_HARDIRQS_NO_DEPRECATED
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

irq_chip.end got obsolete with the removal of __do_IRQ()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

c514d00c8057 "xen: events: add xen_allocate_irq_{dynamic, gsi} and
xen_free_irq" correctly avoids reallocating legacy IRQs (which are
managed by the arch core) but erroneously did not prevent them being
freed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

There are three cases which we need to care about, PV guest, PV domain
0 and HVM guest.

The PV guest case is simple since it has no access to ACPI or real
APICs and therefore has no GSIs therefore we simply dynamically
allocate all IRQs. The potentially interesting case here is PIRQ type
event channels associated with passed through PCI devices. However
even in this case the guest has no direct interaction with the
physical GSI since that happens in the PCI backend.

The PV domain 0 and HVM guest cases are actually the same. In domain 0
case the kernel sees the host ACPI and GSIs (although it only sees the
APIC indirectly via the hypervisor) and in the HVM guest case it sees
the virtualised ACPI and emulated APICs. In these cases we start
allocating dynamic IRQs at nr_irqs_gsi so that they cannot clash with
any GSI.

Currently xen_allocate_irq_dynamic starts at nr_irqs and works
backwards looking for a free IRQ in order to (try and) avoid clashing
with GSIs used in domain 0 and in HVM guests. This change avoids that
although we retain the behaviour of allowing dynamic IRQs to encroach
on the GSI range if no suitable IRQs are available since a future IRQ
clash is deemed preferable to failure right now.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>

This is neater than open-coded calls to irq_alloc_desc_at and
irq_free_desc.

No intended behavioural change.

Note that we previously were not checking the return value of
irq_alloc_desc_at which would be failing for GSI<NR_IRQS_LEGACY
because the core architecture code has already allocated those for
us. Hence the additional check against NR_IRQS_LEGACY in
xen_allocate_irq_gsi.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>

The only caller is xen_allocate_pirq_msi which is also under this
ifdef so this fixes:
    drivers/xen/events.c:377: warning: 'find_unbound_pirq' defined but not used
when CONFIG_PCI_MSI=n
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>

This happens to not be an issue currently because we take pains to try
to ensure that the GSI-IRQ mapping is 1-1 in a PV guest and that
regular event channels do not clash. However a subsequent patch is
going to break this 1-1 mapping.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Copy up lower inode attrs in getattr
  ecryptfs: read on a directory should return EISDIR if not supported
  eCryptfs: Handle NULL nameidata pointers
  eCryptfs: Revert "dont call lookup_one_len to avoid NULL nameidata"

The current code does not follow Intel documentation: It misses some things
and does other, undocumented things. This causes wrong backlight values in
certain conditions. Instead of adding tricky code handling badly documented
and rare corner cases, don't handle combination mode specially at all. This
way PCI_LBPC is never touched and weird things shouldn't happen.

If combination mode is enabled, then the only downside is that changing the
brightness has a greater granularity (the LBPC value), but LBPC is at most
254 and the maximum is in the thousands, so this is no real functional loss.

A potential problem with not handling combined mode is that a brightness of
max * PCI_LBPC is not bright enough. However, this is very unlikely because
from the documentation LBPC seems to act as a scaling factor and doesn't look
like it's supposed to be changed after boot. The value at boot should always
result in a bright enough screen.

IMPORTANT: However, although usually the above is true, it may not be when
people ran an older (2.6.37) kernel which messed up the LBPC register, and
they are unlucky enough to have a BIOS that saves and restores the LBPC value.
Then a good kernel may seem to not work: Max brightness isn't bright enough.
If this happens people should boot back into the old kernel, set brightness
to the maximum, and then reboot. After that everything should be fine.

For more information see the below links. This fixes bugs:

  http://bugzilla.kernel.org/show_bug.cgi?id=23472
  http://bugzilla.kernel.org/show_bug.cgi?id=25072Signed-off-by: Indan Zupancic <indan@nul.nu>
Tested-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We force particular alignment when we generate attribute structures
when generation MODULE_VERSION() data and we need to make sure that
this alignment is followed when we iterate over these structures,
otherwise we may crash on platforms whose natural alignment is not
sizeof(void *), such as m68k.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
[ There are more issues here, but the fixes are incredibly ugly - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  dell-laptop: Toggle the unsupported hardware killswitch
  thinkpad_acpi: Always report scancodes for hotkeys
  acer-wmi: Fix capitalisation of GUID
  platform/x86: ideapad-laptop depends on INPUT
  platform: x86: acer-wmi: world-writable sysfs threeg file
  platform: x86: asus_acpi: world-writable procfs files
  platform: x86: tc1100-wmi: world-writable sysfs wireless and jogdial files
  platform-drivers: x86: pmic: Use request_irq instead of chained handler
  platform-drivers: x86: pmic: Use irq_chip buslock mechanism
  platform-drivers: x86: Convert pmic to new irq_chip functions
  platform-drivers: x86: pmic: Fix up bogus irq hackery

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  fixdep: Do not record dependency on the source file itself

Add fs/eventfd.c to filesystems docbook.
Make typo corrections in fs/eventfd.c.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update the "log_buf_len" description to use [KMG] syntax for the
buffer size.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The '[KMG]' suffix is commonly described after a number of kernel
parameter values documentation.  Explicitly state its semantics.
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Complete the crashkernel= kernel parameter documentation.
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: keep reference to parent inode on ceph_dentry
  ceph: queue cap_snaps once per realm
  libceph: fix socket write error handling
  libceph: fix socket read error handling

Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S5PV210: Fix regulator names
  ARM: S5PV210: Update max8998_platform_data
  ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdata
  ARM: S5P: Fix end address in memory resource information for UART devices
  ARM: S5P64X0: Cleanup map.h file
  ARM: S5P6442: Cleanup map.h file
  ARM: S5PC100: Clenaup map.h file
  ARM: S5PV210: Cleanup map.h file
  ARM: S5PV310: Cleanup map.h file

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] update cifs version
  cifs: Fix regression in LANMAN (LM) auth code
  cifs: fix handling of scopeid in cifs_convert_address

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6745/1: kprobes insn decoding fix
  ARM: tlb: move noMMU tlb_flush() to asm/tlb.h
  ARM: tlb: delay page freeing for SMP and ARMv7 CPUs
  ARM: Keep exit text/data around for SMP_ON_UP
  ARM: Ensure predictable endian state on signal handler entry
  ARM: 6740/1: Place correctly notes section in the linker script
  ARM: 6700/1: SPEAr: Correct SOC config base address for spear320
  ARM: 6722/1: SPEAr: sp810: switch to slow mode before reset
  ARM: 6712/1: SPEAr: replace readl(), writel() with relaxed versions in uncompress.h
  ARM: 6720/1: SPEAr: Append UL to VMALLOC_END
  ARM: 6676/1: Correct the cpu_architecture() function for ARMv7
  ARM: 6739/1: update .gitignore for boot/compressed
  ARM: 6743/1: errata: interrupted ICALLUIS may prevent completion of broadcasted operation
  ARM: 6742/1: pmu: avoid setting IRQ affinity on UP systems
  ARM: 6741/1: errata: pl310 cache sync operation may be faulty