Clang warns:

drivers/dma/fsl-dpaa2-qdma/dpdmai.c:148:25: warning: variable 'cfg' is
uninitialized when used within its own initialization [-Wuninitialized]
        DPDMAI_CMD_CREATE(cmd, cfg);
        ~~~~~~~~~~~~~~~~~~~~~~~^~~~
drivers/dma/fsl-dpaa2-qdma/dpdmai.c:42:24: note: expanded from macro
'DPDMAI_CMD_CREATE'
        typeof(_cfg) (cfg) = (_cfg); \
                      ~~~     ^~~~
1 warning generated.

Looking at the preprocessed source, we can see that this is true.

int dpdmai_create(struct fsl_mc_io *mc_io, u32 cmd_flags,
                  const struct dpdmai_cfg *cfg, u16 *token)
{
        struct fsl_mc_command cmd = { 0 };
        int err;

        cmd.header = mc_encode_cmd_header((((0x90E) << 4) | 0), cmd_flags, 0);
        do {
                typeof(cmd)(cmd) = (cmd);
                typeof(cfg)(cfg) = (cfg);
                ((cmd).params[0] |= mc_enc((8), (8), (cfg)->priorities[0]));
                ((cmd).params[0] |= mc_enc((16), (8), (cfg)->priorities[1]));
        } while (0);

I cannot see a good reason to create another version of cfg when the
parameter one will work perfectly fine and cmd can just be used as is.
Remove them to fix this warning.

Fixes: f2835adf ("dmaengine: fsl-dpaa2-qdma: Add the DPDMAI(Data Path DMA Interface) support")
Link: https://github.com/ClangBuiltLinux/linux/issues/746Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20191022171648.37732-1-natechancellor@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

platform_get_irq_byname() might return -errno which later would be cast
to an unsigned int and used in IRQ handling code leading to usage of
wrong ID and errors about wrong irq_base.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Peng Ma <peng.ma@nxp.com>
Tested-by: Peng Ma <peng.ma@nxp.com>
Link: https://lore.kernel.org/r/20191004150826.6656-1-krzk@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

The symbols were not exported leading to error:

WARNING: modpost: missing MODULE_LICENSE() in drivers/dma/fsl-dpaa2-qdma/dpdmai.o
see include/linux/module.h for more information
GZIP    arch/arm64/boot/Image.gz
ERROR: "dpdmai_enable" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined!
ERROR: "dpdmai_set_rx_queue" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined!
ERROR: "dpdmai_get_tx_queue" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined!
ERROR: "dpdmai_get_rx_queue" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined!
ERROR: "dpdmai_get_attributes" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined!
ERROR: "dpdmai_open" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined!
ERROR: "dpdmai_close" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined!
ERROR: "dpdmai_disable" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined!
ERROR: "dpdmai_reset" [drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.ko] undefined!
WARNING: "HYPERVISOR_platform_op" [vmlinux] is a static EXPORT_SYMBOL_GPL
make[2]: *** [__modpost] Error 1
make[1]: *** [modules] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [sub-make] Error 2

So export it.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20191023045617.22764-1-peng.ma@nxp.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Whenever we reset the channel, we need to clear desc_pendingcount
along with desc_submitcount. Otherwise when a new transaction is
submitted, the irq coalesce level could be programmed to an incorrect
value in the axidma case.

This behavior can be observed when terminating pending transactions
with xilinx_dma_terminate_all() and then submitting new transactions
without releasing and requesting the channel.
Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1571150904-3988-8-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The driver should not run out of tx segments in normal operation. But,
if the user attempts to prepare a transaction with a large sg list,
the driver may not have enough free segments to accommodate the request.

Log a message at the debug level to inform the user in case they are
experiencing issues.
Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1571150904-3988-7-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Take advantage of dmaengine_desc_get_callback_invoke which allows either
a callback or callback_result to be specified. This can be useful when
using the AXI DMA transfer unknown quantities of data where the residue
contained in the result can be used to calculate the number of bytes
transferred.
Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1571150904-3988-6-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Introduce a function that can calculate residues for IPs that support it:
AXI DMA and CDMA.
Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1571150904-3988-5-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

There is no use of storing channel data residue field. So clean it up.
In tx_status simply pass calculated residue to dma_set_residue.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1571150904-3988-4-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The dma api provides a single interface to get the appropriate callback
and invoke it directly. Prefer using it.
Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1571150904-3988-3-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

In descriptor cleanup the call to desc_callback_valid can be safely
removed as both callback pointers i.e callback_result and callback
are anyway checked in invoke(). There is no much benefit in having
redundant checks.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Nicholas Graumann <nick.graumann@gmail.com>
Reviewed-by: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Link: https://lore.kernel.org/r/1571150904-3988-2-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Driver for Socionext Milbeaut XDMAC controller. The controller only
supports Mem-To-Mem transfers over upto 8 configurable channels.
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/20191015033219.14713-1-jassisinghbrar@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Document the devicetree bindings for Socionext Milbeaut XDMAC
controller. Controller only supports Mem->Mem transfers. Number
of physical channels are determined by the number of irqs registered.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/20191015033157.14656-1-jassisinghbrar@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Driver for Socionext Milbeaut HDMAC controller. The controller has
upto 8 floating channels, that need a predefined slave-id to work
from a set of slaves.
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/20191015033359.14925-1-jassisinghbrar@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Document the devicetree bindings for Socionext Milbeaut HDMAC
controller. Controller has upto 8 floating channels, that need
a predefined slave-id to work from a set of slaves.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/20191015033350.14866-1-jassisinghbrar@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

DPPA2(Data Path Acceleration Architecture 2) qDMA supports
virtualized channel by allowing DMA jobs to be enqueued into
different work queues. Core can initiate a DMA transaction by
preparing a frame descriptor(FD) for each DMA job and enqueuing
this job through a hardware portal. DPAA2 components can also
prepare a FD and enqueue a DMA job through a hardware portal.
The qDMA prefetches DMA jobs through DPAA2 hardware portal. It
then schedules and dispatches to internal DMA hardware engines,
which generate read and write requests. Both qDMA source data and
destination data can be either contiguous or non-contiguous using
one or more scatter/gather tables.
The qDMA supports global bandwidth flow control where all DMA
transactions are stalled if the bandwidth threshold has been reached.
Also supported are transaction based read throttling.

Add NXP dppa2 qDMA to support some of Layerscape SoCs.
such as: LS1088A, LS208xA, LX2, etc.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Link: https://lore.kernel.org/r/20190930020440.7754-2-peng.ma@nxp.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The MC(Management Complex) exports the DPDMAI(Data Path DMA Interface)
object as an interface to operate the DPAA2(Data Path Acceleration
Architecture 2) qDMA Engine. The DPDMAI enables sending frame-based
requests to qDMA and receiving back confirmation response on transaction
completion, utilizing the DPAA2 QBMan(Queue Manager and Buffer Manager
hardware) infrastructure. DPDMAI object provides up to two priorities for
processing qDMA requests.
The following list summarizes the DPDMAI main features and capabilities:
	1. Supports up to two scheduling priorities for processing
	service requests.
	- Each DPDMAI transmit queue is mapped to one of two service
	priorities, allowing further prioritization in hardware between
	requests from different DPDMAI objects.
	2. Supports up to two receive queues for incoming transaction
	completion confirmations.
	- Each DPDMAI receive queue is mapped to one of two receive
	priorities, allowing further prioritization between other
	interfaces when associating the DPDMAI receive queues to DPIO
	or DPCON(Data Path Concentrator) objects.
	3. Supports different scheduling options for processing received
	packets:
	- Queues can be configured either in 'parked' mode (default),
	or attached to a DPIO object, or attached to DPCON object.
	4. Allows interaction with one or more DPIO objects for
	dequeueing/enqueueing frame descriptors(FD) and for
	acquiring/releasing buffers.
	5. Supports enable, disable, and reset operations.

Add dpdmai to support some platforms with dpaa2 qdma engine.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Link: https://lore.kernel.org/r/20190930020440.7754-1-peng.ma@nxp.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Renesas RZ/G2N (R8A774B1) SoC also has the R-Car gen2/3 compatible
DMA controllers, therefore document RZ/G2N specific bindings.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1569580629-55677-1-git-send-email-biju.das@bp.renesas.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use the new helper that wraps the calls to platform_get_resource()
and devm_ioremap_resource() together, which can simpify the code.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Link: https://lore.kernel.org/r/1af3efdac3b217203cace090c8947386854c0144.1569554639.git.baolin.wang@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

In dma probe, the driver checks for devm_clk_get return and print error
message in the failing case. However for -EPROBE_DEFER this message is
confusing so avoid it.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1569495060-18117-5-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Replace the chain of platform_get_resource() and devm_ioremap_resource()
with devm_platform_ioremap_resource(). It simplifies the flow and there
is no functional change.

Fixes below cocinelle warning-
WARNING: Use devm_platform_ioremap_resource for xdev -> regs
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1569495060-18117-4-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Don't populate the array 'handler' on the stack but instead make it
static const. Makes the object code smaller by 80 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  38225	   9084	     64	  47373	   b90d	drivers/dma/iop-adma.o

After:
   text	   data	    bss	    dec	    hex	filename
  38081	   9148	     64	  47293	   b8bd	drivers/dma/iop-adma.o

(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190905163726.19690-1-colin.king@canonical.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

On some platforms the clock can be fixed rate, always running one and
there is no need to do anything with it.

In order to support those platforms, switch to use optional clock.

Fixes: f8d9ddbc ("dmaengine: dw: platform: Enable iDMA 32-bit on Intel Elkhart Lake")
Depends-on: 60b8f0dd ("clk: Add (devm_)clk_get_optional() functions")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20190924085116.83683-1-andriy.shevchenko@linux.intel.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Simplify this function implementation by using a known wrapper function.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://lore.kernel.org/r/85de79fa-1ca5-a1e5-0296-9e8a2066f134@web.deSigned-off-by: Vinod Koul <vkoul@kernel.org>

Simplify this function implementation by using a known wrapper function.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/d36b6a6c-2e3d-8d68-6ddc-969a377ca3b2@web.deSigned-off-by: Vinod Koul <vkoul@kernel.org>

Simplify this function implementation by using a known wrapper function.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/366e776c-8760-eeb7-c248-7380c9f4fd34@web.deSigned-off-by: Vinod Koul <vkoul@kernel.org>

Simplify this function implementation a bit by using
a known wrapper function.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/c7e3bbae-44fa-9019-18ee-c6cdfd7c2a14@web.deSigned-off-by: Vinod Koul <vkoul@kernel.org>

Simplify this function implementation by using a known wrapper function.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/aaed7862-49bb-e368-3e7b-5cc2c3d915b1@web.deSigned-off-by: Vinod Koul <vkoul@kernel.org>

Simplify this function implementation a bit by using
a known wrapper function.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/5dd19f28-349a-4957-ea3a-6aebbd7c97e2@web.deSigned-off-by: Vinod Koul <vkoul@kernel.org>

Simplify this function implementation by using a known wrapper function.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/377247f3-b53a-a9d9-66c7-4b8515de3809@web.deSigned-off-by: Vinod Koul <vkoul@kernel.org>

This patch adds dma-channel-mask property support not to reserve
some DMA channels for some reasons. (for example: a heterogeneous
CPU uses it.)
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1568010892-17606-5-git-send-email-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

This patch uses devm_platform_ioremap_resource() instead of
using platform_get_resource() and devm_ioremap_resource() together
to simplify.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/1568010892-17606-4-git-send-email-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Since we will have changed memory mapping of the DMAC in the future,
this patch uses of_data values instead of a macro to calculate
each channel's base offset.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/1568010892-17606-3-git-send-email-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

drivers/dma/ti/edma.c: In function edma_probe:
drivers/dma/ti/edma.c:2252:11: warning:
 variable off set but not used [-Wunused-but-set-variable]

'off' is not used now, so remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190905060249.23928-1-yuehaibing@huawei.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Replace the chain of platform_get_resource() and devm_ioremap_resource()
with devm_platform_ioremap_resource().

This allows to remove the local variable for (struct resource *), and
have one function call less.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20190905034133.29514-1-yamada.masahiro@socionext.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Pull btrfs fixes from David Sterba:
 "A bunch of fixes that accumulated in recent weeks, mostly material for
  stable.

  Summary:

   - fix for regression from 5.3 that prevents to use balance convert
     with single profile

   - qgroup fixes: rescan race, accounting leak with multiple writers,
     potential leak after io failure recovery

   - fix for use after free in relocation (reported by KASAN)

   - other error handling fixups"

* tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls
  btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space
  btrfs: Fix a regression which we can't convert to SINGLE profile
  btrfs: relocation: fix use-after-free on dead relocation roots
  Btrfs: fix race setting up and completing qgroup rescan workers
  Btrfs: fix missing error return if writeback for extent buffer never started
  btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer
  Btrfs: fix selftests failure due to uninitialized i_mode in test inodes

Pull csky updates from Guo Ren:
 "This round of csky subsystem just some fixups:

   - Fix mb() synchronization problem

   - Fix dma_alloc_coherent with PAGE_SO attribute

   - Fix cache_op failed when cross memory ZONEs

   - Optimize arch_sync_dma_for_cpu/device with dma_inv_range

   - Fix ioremap function losing

   - Fix arch_get_unmapped_area() implementation

   - Fix defer cache flush for 610

   - Support kernel non-aligned access

   - Fix 610 vipt cache flush mechanism

   - Fix add zero_fp fixup perf backtrace panic

   - Move static keyword to the front of declaration

   - Fix csky_pmu.max_period assignment

   - Use generic free_initrd_mem()

   - entry: Remove unneeded need_resched() loop"

* tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux:
  csky: Move static keyword to the front of declaration
  csky: entry: Remove unneeded need_resched() loop
  csky: Fixup csky_pmu.max_period assignment
  csky: Fixup add zero_fp fixup perf backtrace panic
  csky: Use generic free_initrd_mem()
  csky: Fixup 610 vipt cache flush mechanism
  csky: Support kernel non-aligned access
  csky: Fixup defer cache flush for 610
  csky: Fixup arch_get_unmapped_area() implementation
  csky: Fixup ioremap function losing
  csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range
  csky/dma: Fixup cache_op failed when cross memory ZONEs
  csky: Fixup dma_alloc_coherent with PAGE_SO attribute
  csky: Fixup mb() synchronization problem

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes that have trickled in through the merge window:

   - Video fixes for OMAP due to panel-dpi driver removal

   - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7

   - Fixing arch version on ASpeed ast2500

   - Two fixes for reset handling on ARM SCMI"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: aspeed: ast2500 is ARMv6K
  reset: reset-scmi: add missing handle initialisation
  firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset
  bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle()
  ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux
  ARM: dts: am3517-evm: Fix missing video
  ARM: dts: logicpd-torpedo-baseboard: Fix missing video
  ARM: omap2plus_defconfig: Fix missing video
  bus: ti-sysc: Fix handling of invalid clocks
  bus: ti-sysc: Fix clock handling for no-idle quirks

Pull tracing fixes from Steven Rostedt:
 "A few more tracing fixes:

   - Fix a buffer overflow by checking nr_args correctly in probes

   - Fix a warning that is reported by clang

   - Fix a possible memory leak in error path of filter processing

   - Fix the selftest that checks for failures, but wasn't failing

   - Minor clean up on call site output of a memory trace event"

* tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  selftests/ftrace: Fix same probe error test
  mm, tracing: Print symbol name for call_site in trace events
  tracing: Have error path in predicate_parse() free its allocated memory
  tracing: Fix clang -Wint-in-bool-context warnings in IF_ASSIGN macro
  tracing/probe: Fix to check the difference of nr_args before adding probe

Pull more MMC updates from Ulf Hansson:
 "A couple more updates/fixes for MMC:

   - sdhci-pci: Add Genesys Logic GL975x support

   - sdhci-tegra: Recover loss in throughput for DMA

   - sdhci-of-esdhc: Fix DMA bug"

* tag 'mmc-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: host: sdhci-pci: Add Genesys Logic GL975x support
  mmc: tegra: Implement ->set_dma_mask()
  mmc: sdhci: Let drivers define their DMA mask
  mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence
  mmc: sdhci: improve ADMA error reporting