- 19 Apr, 2008 35 commits
-
-
Glauber Costa authored
i386 gets an empty function. Signed-off-by:
Glauber Costa <gcosta@redhat.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Glauber Costa authored
the old i386 implementation is moved to pci-base_32.c Signed-off-by:
-
Glauber Costa authored
i386 base does not need it, so it gets an empty function. Signed-off-by:
-
Glauber Costa authored
That's already the name of the game for x86_64. For i386, we add a pci-base_32.c, that will hold the default operations. The function call itself goes through dma-mapping.h , the common header Signed-off-by:
-
Glauber Costa authored
take it off the x86_64 specific header Signed-off-by:
-
Yinghai Lu authored
a system with 256 GB of RAM, when NUMA is disabled crashes the following way: Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Cannot allocate aperture memory hole (ffff8101c0000000,65536K) Kernel panic - not syncing: Not enough memory for aperture Pid: 0, comm: swapper Not tainted 2.6.25-rc4-x86-latest.git #33 Call Trace: [<ffffffff84037c62>] panic+0xb2/0x190 [<ffffffff840381fc>] ? release_console_sem+0x7c/0x250 [<ffffffff847b1628>] ? __alloc_bootmem_nopanic+0x48/0x90 [<ffffffff847b0ac9>] ? free_bootmem+0x29/0x50 [<ffffffff847ac1f7>] gart_iommu_hole_init+0x5e7/0x680 [<ffffffff847b255b>] ? alloc_large_system_hash+0x16b/0x310 [<ffffffff84506a2f>] ? _etext+0x0/0x1 [<ffffffff847a2e8c>] pci_iommu_alloc+0x1c/0x40 [<ffffffff847ac795>] mem_init+0x45/0x1a0 [<ffffffff8479ff35>] start_kernel+0x295/0x380 [<ffffffff8479f1c2>] _sinittext+0x1c2/0x230 the root cause is : memmap PMD is too big, [ffffe200e0600000-ffffe200e07fffff] PMD ->ffff81383c000000 on node 0 almost near 4G..., and vmemmap_alloc_block will use up the ram under 4G. solution will be: 1. make memmap allocation get memory above 4G... 2. reserve some dma32 range early before we try to set up memmap for all. and release that before pci_iommu_alloc, so gart or swiotlb could get some range under 4g limit for sure. the patch is using method 2. because method1 may need more code to handle SPARSEMEM and SPASEMEM_VMEMMAP will get Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 Memory: 264245736k/268959744k available (8484k kernel code, 4187464k reserved, 4004k data, 724k init) Signed-off-by:
Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by:
-
Suresh Siddha authored
For example, If the physical address layout on a two node system with 8 GB memory is something like: node 0: 0-2GB, 4-6GB node 1: 2-4GB, 6-8GB Current kernels fail to boot/detect this NUMA topology. ACPI SRAT tables can expose such a topology which needs to be supported. Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by:
-
Roland McGrath authored
The 64-bit vDSO's sources are compiled with -g0 for no good reason. Using -g when enabled lets their separate debug files be used at runtime via build ID matching, same as we can see 32-bit vDSO's assembly sources. Signed-off-by:
Roland McGrath <roland@redhat.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Suresh Siddha authored
Signed-off-by:
-
Suresh Siddha authored
Signed-off-by:
-
Suresh Siddha authored
Only allocate the FPU area when the application actually uses FPU, i.e., in the first lazy FPU trap. This could save memory for non-fpu using apps. for example: on my system after boot, there are around 300 processes, with only 17 using FPU. Signed-off-by:
-
Suresh Siddha authored
Split the FPU save area from the task struct. This allows easy migration of FPU context, and it's generally cleaner. It also allows the following two optimizations: 1) only allocate when the application actually uses FPU, so in the first lazy FPU trap. This could save memory for non-fpu using apps. Next patch does this lazy allocation. 2) allocate the right size for the actual cpu rather than 512 bytes always. Patches enabling xsave/xrstor support (coming shortly) will take advantage of this. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Ingo Molnar authored
this function doesnt just 'find' the max_pfn - it also has other side-effects such as registering sparse memory maps. Signed-off-by:
-
Thomas Gleixner authored
We already catch most of the TSC problems by sanity checks, but there is a subtle bug which has been in the code forever. This can cause time jumps in the range of hours. This was reported in: http://lkml.org/lkml/2007/8/23/96 and http://lkml.org/lkml/2008/3/31/23 I was able to reproduce the problem with a gettimeofday loop test on a dual core and a quad core machine which both have sychronized TSCs. The TSCs seems not to be perfectly in sync though, but the kernel is not able to detect the slight delta in the sync check. Still there exists an extremly small window where this delta can be observed with a real big time jump. So far I was only able to reproduce this with the vsyscall gettimeofday implementation, but in theory this might be observable with the syscall based version as well. CPU 0 updates the clock source variables under xtime/vyscall lock and CPU1, where the TSC is slighty behind CPU0, is reading the time right after the seqlock was unlocked. The clocksource reference data was updated with the TSC from CPU0 and the value which is read from TSC on CPU1 is less than the reference data. This results in a huge delta value due to the unsigned subtraction of the TSC value and the reference value. This algorithm can not be changed due to the support of wrapping clock sources like pm timer. The huge delta is converted to nanoseconds and added to xtime, which is then observable by the caller. The next gettimeofday call on CPU1 will show the correct time again as now the TSC has advanced above the reference value. To prevent this TSC specific wreckage we need to compare the TSC value against the reference value and return the latter when it is larger than the actual TSC value. I pondered to mark the TSC unstable when the readout is smaller than the reference value, but this would render an otherwise good and fast clocksource unusable without a real good reason. Signed-off-by: -
Erik Bosman authored
This patch adds three tests that test whether the PR_GET_TSC and PR_SET_TSC commands have the desirable effect. The tests check whether the control register is updated correctly at context switches and try to discover bugs while enabling/disabling the timestamp counter. Signed-off-by:
Erik Bosman <ejbosman@cs.vu.nl> Signed-off-by:
-
Erik Bosman authored
This patch implements the PR_GET_TSC and PR_SET_TSC prctl() commands on the x86 platform (both 32 and 64 bit.) These commands control the ability to read the timestamp counter from userspace (the RDTSC instruction.) While the RDTSC instuction is a useful profiling tool, it is also the source of some non-determinism in ring-3. For deterministic replay applications it is useful to be able to trap and emulate (and record the outcome of) this instruction. This patch uses code earlier used to disable the timestamp counter for the SECCOMP framework. A side-effect of this patch is that the SECCOMP environment will now also disable the timestamp counter on x86_64 due to the addition of the TIF_NOTSC define on this platform. The code which enables/disables the RDTSC instruction during context switches is in the __switch_to_xtra function, which already handles other unusual conditions, so normal performance should not have to suffer from this change. Signed-off-by:
-
Erik Bosman authored
This patch adds prctl commands that make it possible to deny the execution of timestamp counters in userspace. If this is not implemented on a specific architecture, prctl will return -EINVAL. ned-off-by:
-
Steven Rostedt authored
This annotates NMI functions with notrace. Some tracers may be able to live with this, but some cannot. The safest is to turn it off, it's not particularly interesting anyway. Signed-off-by:
Steven Rostedt <srostedt@redhat.com> Signed-off-by:
-
Pavel Machek authored
Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Jiri Slaby authored
- noexec32 is on by default for years already - add noexec32 to kernel-parameters and fix noexec typo in there Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Yinghai Lu authored
cleanup: change the _end in compressed vmlinux_64.lds. also change _heap to _ebss that is not needed. Signed-off-by:
-
Alexander van Heukelum authored
The kernel decompressor wrapper uses memory located beyond the end of the image. This might lead to hard to debug problems, but even if it can be proven to be safe, it is at the very least unclean. I don't see any advantages either, unless you count it not being zeroed out as an advantage. This patch moves the boot-heap area to the bss segment. Signed-off-by:
Alexander van Heukelum <heukelum@fastmail.fm> Signed-off-by:
-
Randy Dunlap authored
Fix printk formats in x86/mm/ioremap.c: next-20080410/arch/x86/mm/ioremap.c:137: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'resource_size_t' next-20080410/arch/x86/mm/ioremap.c:188: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'resource_size_t' next-20080410/arch/x86/mm/ioremap.c:188: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'long unsigned int' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Jacek Luczak authored
fix section mismatch warnings which occurs on my x86_64 box while compiling linux-next-20080410: Warning messages: WARNING: arch/x86/kernel/built-in.o(.text+0x7bc2): Section mismatch in reference from the function bad_addr() to the variable .init.data:early_res The function bad_addr() references the variable __initdata early_res. This is often because bad_addr lacks a __initdata annotation or the annotation of early_res is wrong. WARNING: arch/x86/kernel/built-in.o(.text+0x7c3b): Section mismatch in reference from the function bad_addr_size() to the variable .init.data:early_res The function bad_addr_size() references the variable __initdata early_res. This is often because bad_addr_size lacks a __initdata annotation or the annotation of early_res is wrong. Signed-off-by:
Jacek Luczak <luczak.jacek@gmail.com> Signed-off-by:
-
Jacek Luczak authored
I've made a small investigation about vm86.h inclusion rules and it looks like everything is more or less ok. Files that rely on asm/vm86.h symbols are: - kprobes.c - process_32.c - signal_32.c - traps_32.c - vm86_32.c File process_32.c includes vm86.h explicitly. We can remove that include and it won't break anything. Signed-off-by:
-
WANG Cong authored
Remove old comments that include the old arch/i386 directory. Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Acked-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Harvey Harrison authored
irqs_disabled() uses flags internally, use _flags to avoid shadowing code calling into this macro. Introduced between 2.6.25-rc3 and -rc4 Fixes the sparse warning: arch/x86/mm/pageattr.c:383:21: warning: symbol 'flags' shadows an earlier one arch/x86/mm/pageattr.c:369:16: originally declared here Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
Yinghai Lu authored
ramdisk is reserved via reserve_early in x86_64_start_kernel, later early_res_to_bootmem() will convert to reservation in bootmem. so don't need to reserve that again. Signed-off-by:
-
Huang, Ying authored
Make x86 EFI code works when EFI_PAGE_SHIFT != PAGE_SHIFT. The memrage_efi_to_native() provided in this patch can be used on other EFI platform such as IA64 too. This patch has been tested on Intel x86_64 platform with EFI 64/32 firmware. Signed-off-by:
Huang Ying <ying.huang@intel.com> Signed-off-by:
-
Ingo Molnar authored
Signed-off-by: -
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: security: fix up documentation for security_module_enable Security: Introduce security= boot parameter Audit: Final renamings and cleanup SELinux: use new audit hooks, remove redundant exports Audit: internally use the new LSM audit hooks LSM/Audit: Introduce generic Audit LSM hooks SELinux: remove redundant exports Netlink: Use generic LSM hook Audit: use new LSM hooks instead of SELinux exports SELinux: setup new inode/ipc getsecid hooks LSM: Introduce inode_getsecid and ipc_getsecid hooks
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits) [NET]: Fix and allocate less memory for ->priv'less netdevices [IPV6]: Fix dangling references on error in fib6_add(). [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found [PKT_SCHED]: Fix datalen check in tcf_simp_init(). [INET]: Uninline the __inet_inherit_port call. [INET]: Drop the inet_inherit_port() call. SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked. [netdrvr] forcedeth: internal simplifications; changelog removal phylib: factor out get_phy_id from within get_phy_device PHY: add BCM5464 support to broadcom PHY driver cxgb3: Fix __must_check warning with dev_dbg. tc35815: Statistics cleanup natsemi: fix MMIO for PPC 44x platforms [TIPC]: Cleanup of TIPC reference table code [TIPC]: Optimized initialization of TIPC reference table [TIPC]: Remove inlining of reference table locking routines e1000: convert uint16_t style integers to u16 ixgb: convert uint16_t style integers to u16 sb1000.c: make const arrays static sb1000.c: stop inlining largish static functions ...
-
James Morris authored
security_module_enable() can only be called during kernel init. Signed-off-by:James Morris <jmorris@namei.org>
-
Ahmed S. Darwish authored
Add the security= boot parameter. This is done to avoid LSM registration clashes in case of more than one bult-in module. User can choose a security module to enable at boot. If no security= boot parameter is specified, only the first LSM asking for registration will be loaded. An invalid security module name will be treated as if no module has been chosen. LSM modules must check now if they are allowed to register by calling security_module_enable(ops) first. Modify SELinux and SMACK to do so. Do not let SMACK register smackfs if it was not chosen on boot. Smackfs assumes that smack hooks are registered and the initial task security setup (swapper->security) is done. Signed-off-by:
Ahmed S. Darwish <darwish.07@gmail.com> Acked-by:
-
- 18 Apr, 2008 5 commits
-
-
Ahmed S. Darwish authored
Rename the se_str and se_rule audit fields elements to lsm_str and lsm_rule to avoid confusion. Signed-off-by:
Casey Schaufler <casey@schaufler-ca.com> Signed-off-by:
-
Ahmed S. Darwish authored
Setup the new Audit LSM hooks for SELinux. Remove the now redundant exported SELinux Audit interface. Audit: Export 'audit_krule' and 'audit_field' to the public since their internals are needed by the implementation of the new LSM hook 'audit_rule_known'. Signed-off-by:
-
Ahmed S. Darwish authored
Convert Audit to use the new LSM Audit hooks instead of the exported SELinux interface. Basically, use: security_audit_rule_init secuirty_audit_rule_free security_audit_rule_known security_audit_rule_match instad of (respectively) : selinux_audit_rule_init selinux_audit_rule_free audit_rule_has_selinux selinux_audit_rule_match Signed-off-by:
-
Ahmed S. Darwish authored
Introduce a generic Audit interface for security modules by adding the following new LSM hooks: audit_rule_init(field, op, rulestr, lsmrule) audit_rule_known(krule) audit_rule_match(secid, field, op, rule, actx) audit_rule_free(rule) Those hooks are only available if CONFIG_AUDIT is enabled. Signed-off-by:
Paul Moore <paul.moore@hp.com>
-
Ahmed S. Darwish authored
Remove the following exported SELinux interfaces: selinux_get_inode_sid(inode, sid) selinux_get_ipc_sid(ipcp, sid) selinux_get_task_sid(tsk, sid) selinux_sid_to_string(sid, ctx, len) They can be substitued with the following generic equivalents respectively: new LSM hook, inode_getsecid(inode, secid) new LSM hook, ipc_getsecid*(ipcp, secid) LSM hook, task_getsecid(tsk, secid) LSM hook, sid_to_secctx(sid, ctx, len) Signed-off-by:
-
