The vast majority of SH platforms want this, and the few that don't
aren't going to care one way or the other. Enable it across the board.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Presently this was tacked on to the dma debug init bits from
fs_initcall(), which is far too late for devices setting up their own
per-device coherent areas.

Throw this in the beginning of mem_init(), as per the x86 iommu
allocation.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Many of these symbols went away completely, or we just never cared about
them in the first place. Trim the exports down to the essential set.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Currently this is ifdef'ed under SH-3 and SH-4A, but there are other CPUs
that will need this as well. Given the size of the existing data
structures, this doesn't cause any additional cacheline utilization for
the existing users, so has no direct impact on the data structures.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

These were previously hidden in sh_ksyms_32, despite also being needed
for sh64 now that the cache.c code is shared.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This fixes up the dma_is_consistent() definition for the various
coherence options.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Now that this contains a grand total of 1 Kconfig option, it's hardly
worth keeping split out. Roll CONFIG_PCI back in to the top-level
architecture Kconfig, along with the other bus types.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Leaving this configurable caused more trouble than it was ever worth, so
just make it explicit. Boards that are verified one way or the other can
fix up their selects accordingly. We presently default to non-coherent
for most platforms.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Now that SH's irqflags functions are out of line it becomes necessary to
mark them as "notrace" so that we don't try to trace them.

[ Do the same for irq_64.c -- PFM. ]
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Valentin Sitdikov <valentin.sitdikov@siemens.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Convert the ecovec24 board code to pass the mac
address to the sh_eth driver using platform data.
Also, remove the static clock to allow Runtime PM.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add HWBLK_ETHER to the sh_eth platform device
to allow Runtime PM of the ethernet hardware.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add an uImage.bin target to allow uncompressed uImages.
Useful for boards with busted u-boot decompression like
the rsk7203 on my desk.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Fix the rsk7203 board code to build with CONFIG_MTD=n.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This unbreaks kexec support. Without this fix all
cases of kexec fails since __pa() does not behave
like PHYSADDR(). The downside is that we also kill
the code blocking users running old kexec-tools.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Conflicts:
	arch/sh/kernel/dwarf.c

Conflicts:
	arch/sh/boards/mach-ecovec24/setup.c
	arch/sh/boards/mach-kfr2r09/setup.c

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add SD Card support to the kfr2r09 board using the
sh_mobile_sdhi driver hooked up to SDHI0 and yc304.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add SD Card support to the se7724 board using the
sh_mobile_sdhi driver hooked up to SDHI0 and CN7.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Convert the AP325 board to use sh_mobile_sdhi for the
SD Card connected to CN3 instead of mmc_spi.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Convert the Migo-R board to use sh_mobile_sdhi for the
SD Card connected to CN9 instead of mmc_spi.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add SUPERH to the Kconfig dependencies for tmio_mmc.

This change allows us to drive the SDHI hardware blocks
found in SuperH Mobile with tmio_mmc.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds an MFD driver for the SuperH Mobile SDHI
hardware block. At this point the driver simply wraps the
tmio-mmc driver with some clock code. In the future this
driver is the place to put SDHI specific hotplug code.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

When CONFIG_FUNCTION_GRAPH_TRACER is enabled the function graph tracer
may patch return addresses on the stack with the address of
return_to_handler(). This really confuses the DWARF unwinder because it
will try find the caller of return_to_handler(), not the caller of the
real return address.

So teach the DWARF unwinder how to find the real return address whenever
it encounters return_to_handler().

This patch does not cope very well when multiple return addresses on the
stack have been patched. To make it work properly it would require state
to track how many return_to_handler()'s have been seen so that we'd know
where to look in current->curr_ret_stack[]. So for now, instead of
trying to handle this, just moan if more than one return address on the
stack has been patched.
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

ERROR: "__movmemSI12" [net/unix/unix.ko] undefined!
ERROR: "__movmemSI52" [net/ipv6/sit.ko] undefined!
ERROR: "__movmemSI24" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI60" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI16" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI20" [net/ipv6/ipv6.ko] undefined!
ERROR: "__movmemSI32" [net/ipv6/ipv6.ko] undefined!
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This adds an __irq_entry annotation for do_IRQ() so that the IRQ
annotation in the function graph tracer works as advertized. We already
have the IRQENTRY section wired up, so this is just a trivial addition
to actually make use of it.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This moves the current dma_alloc/free_coherent() calls to a generic
variant and plugs them in for the nommu default. Other variants can
override the defaults in the dma mapping ops directly.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  move virtrng_remove to .devexit.text
  move virtballoon_remove to .devexit.text
  virtio_blk: Revert serial number support
  virtio: let header files include virtio_ids.h
  virtio_blk: revert QUEUE_FLAG_VIRT addition

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  niu: VLAN_ETH_HLEN should be used to make sure that the whole MAC header was copied to the head buffer in the Vlan packets case
  KS8851: Fix ks8851_set_rx_mode() for IFF_MULTICAST
  KS8851: Fix MAC address write order
  KS8851: Add soft reset at probe time
  net: fix section mismatch in fec.c
  net: Fix struct inet_timewait_sock bitfield annotation
  tcp: Try to catch MSG_PEEK bug
  net: Fix IP_MULTICAST_IF
  bluetooth: static lock key fix
  bluetooth: scheduling while atomic bug fix
  tcp: fix TCP_DEFER_ACCEPT retrans calculation
  tcp: reduce SYN-ACK retrans for TCP_DEFER_ACCEPT
  tcp: accept socket after TCP_DEFER_ACCEPT period
  Revert "tcp: fix tcp_defer_accept to consider the timeout"
  AF_UNIX: Fix deadlock on connecting to shutdown socket
  ethoc: clear only pending irqs
  ethoc: inline regs access
  vmxnet3: use dev_dbg, fix build for CONFIG_BLOCK=n
  virtio_net: use dev_kfree_skb_any() in free_old_xmit_skbs()
  be2net: fix support for PCI hot plug
  ...

The function virtrng_remove is used only wrapped by __devexit_p so define
it using __devexit.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

The function virtballoon_remove is used only wrapped by __devexit_p so
define it using __devexit.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

This reverts "Add serial number support for virtio_blk, V4a".

Turns out that virtio_pci, lguest and s/390 all have an 8 bit limit
on virtio config space, so noone could ever use this.

This is coming back later in a cleaner form.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: john cooper <john.cooper@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>

Rusty,

commit 3ca4f5ca
    virtio: add virtio IDs file
moved all device IDs into a single file. While the change itself is
a very good one, it can break userspace applications. For example
if a userspace tool wanted to get the ID of virtio_net it used to
include virtio_net.h. This does no longer work, since virtio_net.h
does not include virtio_ids.h.
This patch moves all "#include <linux/virtio_ids.h>" from the C
files into the header files, making the header files compatible with
the old ones.

In addition, this patch exports virtio_ids.h to userspace.

CC: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

It seems like the addition of QUEUE_FLAG_VIRT caueses major performance
regressions for Fedora users:

	https://bugzilla.redhat.com/show_bug.cgi?id=509383
	https://bugzilla.redhat.com/show_bug.cgi?id=505695

while I can't reproduce those extreme regressions myself I think the flag
is wrong.

Rationale:

  QUEUE_FLAG_VIRT expands to QUEUE_FLAG_NONROT which casus the queue
  unplugged immediately.  This is not a good behaviour for at least
  qemu and kvm where we do have significant overhead for every
  I/O operations.  Even with all the latested speeups (native AIO,
  MSI support, zero copy) we can only get native speed for up to 128kb
  I/O requests we already are down to 66% of native performance for 4kb
  requests even on my laptop running the Intel X25-M SSD for which the
  QUEUE_FLAG_NONROT was designed.
  If we ever get virtio-blk overhead low enough that this flag makes
  sense it should only be set based on a feature flag set by the host.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

niu: VLAN_ETH_HLEN should be used to make sure that the whole MAC header was copied to the head buffer in the Vlan packets case
Signed-off-by: Joyce Yu <joyce.yu@sun.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.infradead.org/users/eparis/notify:
  dnotify: ignore FS_EVENT_ON_CHILD
  inotify: fix coalesce duplicate events into a single event in special case
  inotify: deprecate the inotify kernel interface
  fsnotify: do not set group for a mark before it is on the i_list

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: hp_sdc_rtc - fix test in hp_sdc_rtc_read_rt()
  Input: atkbd - consolidate force release quirks for volume keys
  Input: logips2pp - model 73 is actually TrackMan FX
  Input: i8042 - add Sony Vaio VGN-FZ240E to the nomux list
  Input: fix locking issue in /proc/bus/input/ handlers
  Input: atkbd - postpone restoring LED/repeat rate at resume
  Input: atkbd - restore resetting LED state at startup
  Input: i8042 - make pnp_data_busted variable boolean instead of int
  Input: synaptics - add another Protege M300 to rate blacklist

* 'kvm-updates/2.6.32' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Prevent kvm_init from corrupting debugfs structures
  KVM: MMU: fix pointer cast
  KVM: use proper hrtimer function to retrieve expiration time