- 01 May, 2017 33 commits
-
-
Abhishek Shah authored
This patch allows users to enable/disable internal TX and/or RX clock delay for BCM5481x series PHYs so as to satisfy RGMII timing specifications. On a particular platform, whether TX and/or RX clock delay is required depends on how PHY connected to the MAC IP. This requirement can be specified through "phy-mode" property in the platform device tree. Signed-off-by:
Abhishek Shah <abhishek.shah@broadcom.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
trivial fix to spelling mistakes in printk message. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Scott Wood authored
The bnx2x driver is not providing proper alignment on the receive buffers it passes to build_skb(), causing skb_shared_info to be misaligned. skb_shared_info contains an atomic, and while PPC normally supports unaligned accesses, it does not support unaligned atomics. Aligning the size of rx buffers will ensure that page_frag_alloc() returns aligned addresses. This can be reproduced on PPC by setting the network MTU to 1450 (or other non-multiple-of-4) and then generating sufficient inbound network traffic (one or two large "wget"s usually does it), producing the following oops: Unable to handle kernel paging request for unaligned access at address 0xc00000ffc43af656 Faulting instruction address: 0xc00000000080ef8c Oops: Kernel access of bad area, sig: 7 [#1] SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: vmx_crypto powernv_rng rng_core powernv_op_panel leds_powernv led_class nfsd ip_tables x_tables autofs4 xfs lpfc bnx2x mdio libcrc32c crc_t10dif crct10dif_generic crct10dif_common CPU: 104 PID: 0 Comm: swapper/104 Not tainted 4.11.0-rc8-00088-g4c761daf #2 task: c00000ffd4892400 task.stack: c00000ffd4920000 NIP: c00000000080ef8c LR: c00000000080eee8 CTR: c0000000001f8320 REGS: c00000ffffc33710 TRAP: 0600 Not tainted (4.11.0-rc8-00088-g4c761daf) MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24082042 XER: 00000000 CFAR: c00000000080eea0 DAR: c00000ffc43af656 DSISR: 00000000 SOFTE: 1 GPR00: c000000000907f64 c00000ffffc33990 c000000000dd3b00 c00000ffcaf22100 GPR04: c00000ffcaf22e00 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000b80008 c00000ffc43af636 c00000ffc43af656 0000000000000000 GPR12: c0000000001f6f00 c00000000fe1a000 000000000000049f 000000000000c51f GPR16: 00000000ffffef33 0000000000000000 0000000000008a43 0000000000000001 GPR20: c00000ffc58a90c0 0000000000000000 000000000000dd86 0000000000000000 GPR24: c000007fd0ed10c0 00000000ffffffff 0000000000000158 000000000000014a GPR28: c00000ffc43af010 c00000ffc9144000 c00000ffcaf22e00 c00000ffcaf22100 NIP [c00000000080ef8c] __skb_clone+0xdc/0x140 LR [c00000000080eee8] __skb_clone+0x38/0x140 Call Trace: [c00000ffffc33990] [c00000000080fb74] skb_clone+0x74/0x110 (unreliable) [c00000ffffc339c0] [c000000000907f64] packet_rcv+0x144/0x510 [c00000ffffc33a40] [c000000000827b64] __netif_receive_skb_core+0x5b4/0xd80 [c00000ffffc33b00] [c00000000082b2bc] netif_receive_skb_internal+0x2c/0xc0 [c00000ffffc33b40] [c00000000082c49c] napi_gro_receive+0x11c/0x260 [c00000ffffc33b80] [d000000066483d68] bnx2x_poll+0xcf8/0x17b0 [bnx2x] [c00000ffffc33d00] [c00000000082babc] net_rx_action+0x31c/0x480 [c00000ffffc33e10] [c0000000000d5a44] __do_softirq+0x164/0x3d0 [c00000ffffc33f00] [c0000000000d60a8] irq_exit+0x108/0x120 [c00000ffffc33f20] [c000000000015b98] __do_irq+0x98/0x200 [c00000ffffc33f90] [c000000000027f14] call_do_irq+0x14/0x24 [c00000ffd4923a90] [c000000000015d94] do_IRQ+0x94/0x110 [c00000ffd4923ae0] [c000000000008d90] hardware_interrupt_common+0x150/0x160 Signed-off-by:
-
Arkadi Sharshevsky authored
Commit 7e26bf45 ("net: bridge: allow SW learn to take over HW fdb entries") added the ability to "take over an entry which was previously learned via HW when it shows up from a SW port". However, if an entry was learned via HW and then a control packet (e.g., ARP request) was trapped to the CPU, the bridge driver will update the entry and remove the externally learned flag, although the entry is still present in HW. Instead, only clear the externally learned flag in case of roaming. Fixes: 7e26bf45 ("net: bridge: allow SW learn to take over HW fdb entries") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Arkadi Sharashevsky <arkadis@mellanox.com> Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
WANG Cong authored
After commit 1215e51e ("ipv4: fix a deadlock in ip_ra_control") we always take RTNL lock for ip_ra_control() which is the only place we update the list ip_ra_chain, so the ip_ra_lock is no longer needed. As Eric points out, BH does not need to disable either, RCU readers don't care. Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
The struct bpf_map_def was extended in commit fb30d4b7 ("bpf: Add tests for map-in-map") with member unsigned int inner_map_idx. This changed the size of the maps section in the generated ELF _kern.o files. Unfortunately the loader in bpf_load.c does not detect or handle this. Thus, older _kern.o files became incompatible, and caused hard-to-debug errors where the syscall validation rejected BPF_MAP_CREATE request. This patch only detect the situation and aborts load_bpf_file(). It also add code comments warning people that read this loader for inspiration for these pitfalls. Fixes: fb30d4b7 ("bpf: Add tests for map-in-map") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Dan Carpenter authored
We recently added a check to see if nla_nest_start() fails. There are two issues with that. First, if it fails then I don't think we should call nla_nest_cancel(). Second, it's slightly convoluted but the current code returns success but we should return -EMSGSIZE instead. Fixes: a50fe0ff ("lwtunnel: check return value of nla_nest_start") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Dan Carpenter authored
Presumably we never hit this return, but static checkers complain that we need to unlock so we may as well fix that. Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
-
Dan Carpenter authored
My static checker complains that we're holding a mutex on this error path. Let's goto exit instead of returning directly. Fixes: b0bccb69 ("qed: Change locking scheme for VF channel") Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
David S. Miller authored
lipeng says: ==================== net: hns: bug fix for HNS driver This patchset add support defered dsaf probe when mdio and mbigen module is not insmod. For more details, please refer to individual patch. change log: V4 - > V5: 1. Float on net-next; 2. Delete patch "net: hns: fixed bug that skb used after kfree" from this patchset; V3 -> V4: 1. Delete redundant commit message; 2. Add Reviewed-by: Matthias Brugger <mbrugger@suse.com>; V2 -> V3: 1. Check return value when platform_get_irq in hns_rcb_get_cfg; V1 -> V2: 1. Return appropriate errno in hns_mac_register_phy; ==================== Signed-off-by: -
lipeng authored
In the hip06 and hip07 SoCs, phy connect to mdio bus.The mdio module is probed with module_init, and, as such, is not guaranteed to probe before the HNS driver. So we need to support deferred probe. We check for probe deferral in the mac init, so we not init DSAF when there is no mdio, and free all resource, to later learn that we need to defer the probe. Signed-off-by:
lipeng <lipeng321@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Reviewed-by:
Matthias Brugger <mbrugger@suse.com> Signed-off-by:
-
lipeng authored
In the hip06 and hip07 SoCs, the interrupt lines from the DSAF controllers are connected to mbigen hw module. The mbigen module is probed with module_init, and, as such, is not guaranteed to probe before the HNS driver. So we need to support deferred probe. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: optimize XDP TX and small fixes This series optimizes the nfp XDP TX performance a little bit. I run quick tests on an Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz. Single core/queue performance for both touch and drop and touch and forward is above 20Mpps @64B packets, drop being 2Mpps faster. I think this is max for a single queue on the low power NFPs. There are also a few minor fixes included for code in net-next. ==================== Signed-off-by: -
Jakub Kicinski authored
For legacy reasons NFP FW may be compiled to DMA packets to a constant offset into the buffer and use the space before it for metadata. This ensures that packets data always start at a certain offset regardless of the amount of preceding metadata. If rx offset is set to 0 there may still be up to 64 bytes of metadata but metadata will start at the beginning of the buffer, instead of: data_start_offset = rx_offset - meta_len Even though we make the buffers larger to accommodate up to 64 bytes of metadata, if there is only N bytes of metadata, we will end up with N bytes of headroom and 64 - N bytes of tailroom. Therefore we can't rely on that space for XDP headroom. Make sure we always allocate full 256 bytes. This, unfortunately, means we can't fit the headroom on an u8 any more. Signed-off-by:Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
Right now the required Service Process ABI version is still tied to max ID of known commands. For new NSP commands we are adding we are checking if NSP version is recent enough on command-by-command basis. The driver doesn't have to force the device to have the very latest flash, anything newer than 0.8 should do. Signed-off-by:
-
Jakub Kicinski authored
Reading TX queue indexes from the device memory on each interrupt is expensive. It's doubly expensive with XDP running since we have two TX rings to check there. If the software indexes indicate that the TX queue is completely empty, however, we don't need to look at the device completion index at all. The queuing CPU is doing a wmb() before kicking the device TX so we should be safe to assume on the CPU handling the completions will never see old value of the software copy of the index. Signed-off-by:
-
Jakub Kicinski authored
On the RX path we follow the "drop if allocation of replacement buffer fails" rule. With XDP we extended that to the TX action, so if XDP prog returned TX but allocation of replacement RX buffer failed, we will drop the packet. To improve our XDP TX performance extend the idea of rings being always full to XDP TX rings. Pre-fill the XDP TX rings with RX buffers, and when XDP prog returns TX action swap the RX buffer with the next buffer from the TX ring. XDP TX complete will no longer free the buffers but let them sit on the TX ring and wait for swap with RX buffer, instead. Signed-off-by:
-
Jakub Kicinski authored
We will soon allocate RX buffers for caching on XDP TX rings. The rx_ring parameter passed to nfp_net_rx_alloc_one() is not actually used, remove it. Signed-off-by:
-
Jakub Kicinski authored
As Or points out in commit 423b3aec ("net/mlx4: Change ENOTSUPP to EOPNOTSUPP"), ENOTSUPP is NFS specific error. Replace it with EOPNOTSUPP. Signed-off-by:
-
Willem de Bruijn authored
Avoid hashing the tx napi struct into napi_hash[], which is used for busy polling receive queues. Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
David Howells authored
Initialise init_net.count to 1 for its pointer from init_nsproxy lest someone tries to do a get_net() and a put_net() in a process in which current->ns_proxy->net_ns points to the initial network namespace. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Girish Moodalbail authored
Creating a geneve link with 'udpcsum' set results in a creation of link for which UDP checksum will NOT be computed on outbound packets, as can be seen below. 11: gen0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether c2:85:27:b6:b4:15 brd ff:ff:ff:ff:ff:ff promiscuity 0 geneve id 200 remote 192.168.13.1 dstport 6081 noudpcsum Similarly, creating a link with 'noudpcsum' set results in a creation of link for which UDP checksum will be computed on outbound packets. Fixes: 9b4437a5 ("geneve: Unify LWT and netdev handling.") Signed-off-by:Girish Moodalbail <girish.moodalbail@oracle.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Acked-by:
Lance Richardson <lrichard@redhat.com> Signed-off-by:
-
David S. Miller authored
Jiri Benc says: ==================== vxlan: do not error out on disabled IPv6 This patchset fixes a bug with metadata based tunnels when booted with ipv6.disable=1. ==================== Signed-off-by: -
Jiri Benc authored
The message "Cannot bind port X, err=Y" creates only confusion. In metadata based mode, failure of IPv6 socket creation is okay if IPv6 is disabled and no error message should be printed. But when IPv6 tunnel was requested, such failure is fatal. The vxlan_socket_create does not know when the error is harmless and when it's not. Instead of passing such information down to vxlan_socket_create, remove the message completely. It's not useful. We propagate the error code up to the user space and the port number comes from the user space. There's nothing in the message that the process creating vxlan interface does not know. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Jiri Benc authored
When IPv6 is compiled but disabled at runtime, __vxlan_sock_add returns -EAFNOSUPPORT. For metadata based tunnels, this causes failure of the whole operation of bringing up the tunnel. Ignore failure of IPv6 socket creation for metadata based tunnels caused by IPv6 not being available. Fixes: b1be00a6 ("vxlan: support both IPv4 and IPv6 sockets in a single vxlan device") Signed-off-by:
-
Andy Shevchenko authored
Replace pattern int status; ... status = func(...); return status; by return func(...); No functional change intented. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Andy Shevchenko authored
Reuse bnx2x_null_format_ver() in functions where it's appropriated instead of open coded variant. Signed-off-by:
-
Andy Shevchenko authored
Use scnprintf() when printing version instead of custom open coded variants. Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.12-20170427' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2017-04-25 this is a pull request of 1 patch for net-next/master. This patch by Oliver Hartkopp fixes the build of the broad cast manager with CONFIG_PROC_FS disabled. ==================== Signed-off-by:
-
Chenbo Feng authored
The description inside uapi/linux/bpf.h about bpf_get_socket_uid helper function is no longer valid. It returns overflowuid rather than 0 when failed. Signed-off-by:
Chenbo Feng <fengc@google.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
-
Davide Caratti authored
avoid direct access to sk->sk_state when tcp_poll() is called on a socket using active TCP fastopen with deferred connect. Use local variable 'state', which stores the result of sk_state_load(), like it was done in commit 00fd38d9 ("tcp: ensure proper barriers in lockless contexts"). Fixes: 19f6d3f3 ("net/tcp-fastopen: Add new API support") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Acked-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
Eric Dumazet authored
While testing a fix [1] in ___pskb_trim(), addressing the WARN_ON_ONCE() in skb_try_coalesce() reported by Andrey, I found that we had an skb with skb->sk set but no skb->destructor. This invalidated heuristic found in commit 158f323b ("net: adjust skb->truesize in pskb_expand_head()") and in cited patch. Considering the BUG_ON(skb->sk) we have in skb_orphan(), we should restrain the temporary setting to a minimal section. [1] https://patchwork.ozlabs.org/patch/755570/ net: adjust skb->truesize in ___pskb_trim() Fixes: 8f917bba ("bpf: pass sk to helper functions") Signed-off-by:
-
Alexandre Belloni authored
Since 83a77e9e, the phydev irq is explicitly set to PHY_POLL when there is no pdata. It doesn't work on DT enabled platforms because the phydev irq is already set by libphy before. Fixes: 83a77e9e ("net: macb: Added PCI wrapper for Platform Driver.") Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
- 30 Apr, 2017 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-04-30 This series contains updates to i40e and i40evf only. Jake provides majority of the changes in this series, starting with the renaming of a flag to avoid confusion. Then renamed a variable to a more meaningful name to clarify what is actually being done and to reduce confusion. Amortizes the wait time when initializing or disabling lots of VFs by using i40e_reset_all_vfs() and i40e_vsi_stop_rings_no_wait(). Cleaned up a unnecessary delay since pci_disable_sriov() already has its own delay, so need to add a additional delay when removing VFs. Avoid using the same name flags for both vsi->state and pf->state, to make code review easier and assist future work to use the correct state field when checking bits. Use DECLARE_BITMAP() to ensure that we always allocate enough space for flags. Replace hw_disabled_flags with the new _AUTO_DISABLED flags, which are more readable because we are not setting an *_ENABLED flag to disable the feature. Alex corrects a oversight where we were not reprogramming the ports after a reset, which was causing us to lose all of the receive tunnel offloads. Arnd Bergmann moves the declaration of a local variable to avoid a warning seen on architectures with larger pages about an unused variable. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2017-04-30 This series contains updates to e1000e only. Jarod Wilson fixes an issue where the workaround for 82574 & 82583 is needed for i218 as well, so set the appropriate flags. Sasha adds support for the upcoming new i219 devices for the client platform (CannonLake), which includes the support for 38.4MHz frequency to support PTP on CannonLake. ==================== Signed-off-by: -
Sasha Neftin authored
Add support for 38.4MHz frequency is required for PTP on CannonLake. SYSTIM frequency adjustment attributes for TIMINCA are get/set dependent on the hardware clock frequency for a different types of adapters. 38.4MHz frequency supported by CannonLake and active once time synchronisation mechanism was enabled Changed abbreviation from Hz to HZ to be compliant checkpatch code style Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Reviewed-by:
Raanan Avargil <raanan.avargil@intel.com> Reviewed-by:
Dima Ruinskiy <dima.ruinskiy@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Sasha Neftin authored
The propagation of CannonLake mac type to driver functionality Signed-off-by:
-
Sasha Neftin authored
i219 (6) and i219 (7) are the next LOM generations that will be available on the nextIntel Client platform (CannonLake) This patch provides the initial support for these devices Signed-off-by:
-
Jarod Wilson authored
I've got reports that the Intel I-218V NIC in Intel NUC5i5RYH systems used as a PTP slave experiences random ~10 hour clock jumps, which are resolved if the same workaround for the 82574 and 82583 is employed, so set the appropriate flag2 in e1000_pch_lpt_info too. Reported-by:
Rupesh Patel <rupatel@redhat.com> Signed-off-by:
Jarod Wilson <jarod@redhat.com> Tested-by:
-
Arnd Bergmann authored
On architectures with larger pages, we get a warning about an unused variable: drivers/net/ethernet/intel/i40evf/i40evf_main.c: In function 'i40evf_configure_rx': drivers/net/ethernet/intel/i40evf/i40evf_main.c:690:21: error: unused variable 'netdev' [-Werror=unused-variable] This moves the declaration into the #ifdef to avoid the warning. Fixes: dab86afd ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
