- 07 Aug, 2018 40 commits
-
-
Keara Leibovitz authored
Initial set of nat action unit tests. Signed-off-by:
Keara Leibovitz <kleib@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Arun Parameswaran says: ==================== Add Broadcom Omega SoC internal switch and phy The patchset is based on David Miller's "net-next" repo. The patches add support for the Broadcom Omega SoC's internal ethernet switch and the internal gphy. The internal ethernet switch in the Omega is a b53 srab based switch. The support for the switch is added to the b53 driver in the dsa framework. The gphy support is added to the bcm7xxx driver. ==================== Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Arun Parameswaran authored
Add support for the Broadcom Omega SoC internal Combo Ethernet GPHY to the bcm7xxx phy driver. Signed-off-by:
Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Arun Parameswaran authored
Add support for the Broadcom Omega SoC internal ethernet switch to the b53 srab driver in the DSA framework. Signed-off-by:
-
Arun Parameswaran authored
Add compatibility strings for the internal switch in the Broadcom Omega SoC family (BCM5831X/BCM1140X) to B53. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2018-08-07 This series contains updates to i40e and i40evf only. Sergey cleans up a duplicate call to i40e_prep_for_reset() during shutdown. YueHaibing cleans up i40evf by removing code that was never being used or called within the driver. Jake updates the ethtool statistics to use a helper function since many of the statistics use the same basic logic for copying strings into the supplied buffer. Cleaned up the use of a local variable that is no longer needed or used. Fixed additional stats issues, including the failure to update the data pointer which was causing stats to be reported incorrectly. Mariusz fixes a bug where there was an oversight in configuring FEC when link settings were forced which was causing 25G link to be configured incorrectly. Piotr adds a missing return code for when the firmware returns a busy state. Also added the process to command firmware to start rearrangement when switching between old NVM structure to the new flat NVM. ==================== Signed-off-by: -
David S. Miller authored
Denis Bolotin says: ==================== qed: Add Multi-TC RoCE support This patch series adds support for multiple concurrent traffic classes for RoCE. The first three patches enable the required parts of the driver to learn the TC configuration, and the last one makes use of it to enable the feature. Please consider applying this to net-next. V1->V2: ------- Avoid allocation in qed_dcbx_get_priority_tc(). Move qed_dcbx_get_priority_tc() out of CONFIG_DCB section since it doesn't call qed_dcbx_query_params() anymore. v2->V3: ------- patch 1/3: qed_dcbx_get_priority_tc() always returns a valid TC by value. In error cases, it returns QED_DCBX_DEFAULT_TC (currently defined 0). patch 3/3: Cosmetic changes in qed_dev.c. ==================== Signed-off-by: -
Denis Bolotin authored
RoCE qps use a pair of physical queues (pq) received from the Queue Manager (QM) - an offload queue (OFLD) and a low latency queue (LLT). The QM block creates a pq for each TC, and allows RoCE qps to ask for a pq with a specific TC. As a result, qps with different VLAN priorities can be mapped to different TCs, and employ features such as PFC and ETS. Signed-off-by:
Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by:
-
Denis Bolotin authored
Distinguish not set offload_tc from offload_tc 0 and add getters and setters. Signed-off-by:
-
Denis Bolotin authored
The API receives a priority and looks for the TC it is mapped to in the operational DCBX configuration. The API returns QED_DCBX_DEFAULT_TC (0) when DCBX is disabled. Signed-off-by:
-
YueHaibing authored
Fix a static code checker warning: net/rds/ib_frmr.c:82 rds_ib_alloc_frmr() warn: passing zero to 'ERR_PTR' The error path for ib_alloc_mr failure should set err to PTR_ERR. Fixes: 1659185f ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
David S. Miller authored
Claudiu Beznea says: ==================== net: macb: add pad and fcs support In [1] it was reported that UDP checksum is offloaded to hardware no mather it was previously computed in software or not. The proposal on [1] was to disable TX checksum offload. This series (mostly patch 3/3) address the issue described at [1] by setting NOCRC bit to TX buffer descriptor for SKBs that arrived from networking stack with checksum computed. For these packets padding and FCS need to be added (hardware doesn't compute them if NOCRC bit is set). The minimum packet size that hardware expects is 64 bytes (including FCS). This feature could not be used in case of GSO, so, it was used only for no GSO SKBs. For SKBs wich requires padding and FCS computation macb_pad_and_fcs() checks if there is enough headroom and tailroom in SKB to avoid copying SKB structure. Since macb_pad_and_fcs() may change SKB the macb_pad_and_fcs() was places in macb_start_xmit() b/w macb_csum_clear() and skb_headlen() calls. This patch was tested with pktgen in kernel tool in a script like this: (pktgen_sample01_simple.sh is at [2]): minSize=1 maxSize=1500 for i in `seq $minSize $maxSize` ; do copy="$(shuf -i 1-2000 -n 1)" ./pktgen_sample01_simple.sh -i eth0 \ -m <dst-mac-addr> -d <dst-ip-addr> -x -s $i -c $copy done minStep=1 maxStep=200 for i in `seq $minStep $maxStep` ; do copy="$(shuf -i 1-2000 -n 1)" size="$(shuf -i 1-1500 -n 1)" ./pktgen_sample01_simple.sh -i eth0 \ -m <dst-mac-addr> -d <dst-ip-addr> -x -s $size -c $copy done Changes since RFC: - in patch 3/3 order local variables by their lenght (reverse christmas tree format) [1] https://www.spinics.net/lists/netdev/msg505065.html [2] https://github.com/netoptimizer/network-testing/blob/master/pktgen/pktgen_sample01_simple.sh ==================== Signed-off-by:
-
Claudiu Beznea authored
For packets with computed IP/TCP/UDP checksum there is no need to tell hardware to recompute it. For such kind of packets hardware expects the packet to be at least 64 bytes and FCS to be computed. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
-
Claudiu Beznea authored
Move checksum clearing outside of spinlock. The SKB is protected by networking lock (HARD_TX_LOCK()). Signed-off-by:
-
Claudiu Beznea authored
Use netdev_tx_t return type for ndo_start_xmit function of macb driver. Signed-off-by:
-
David S. Miller authored
Thomas Falcon says: ==================== ibmvnic: Update firmware error reporting This patch set cleans out a lot of dead code from the ibmvnic driver and adds some more. The error ID field of the descriptor is not filled in by firmware, so do not print it and do not use it to query for more detailed information. Remove the unused code written for this. Finally, update the message to print a string explainng the error cause instead of just the error code. ==================== Signed-off-by: -
Thomas Falcon authored
Print a string instead of the error code. Since there is a possibility that the driver can recover, classify it as a warning instead of an error. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
Thomas Falcon authored
When backing device firmware reports an error, it provides an error ID, which is meant to be queried for more detailed error information. Currently, however, an error ID is not provided by the Virtual I/O server and there are not any plans to do so. For now, it is always unfilled or zero, so request_error_information will never be called. Remove it. Signed-off-by:
-
Intiyaz Basha authored
All control commands (soft commands) goes through only Queue 0 (control and data queue). So only queue-0 needs post_lock, other queues are only data queues and does not need post_lock Added a flag to indicate the queue can be used for soft commands. If this flag is set, post_lock must be acquired before posting a command to the queue. If this flag is clear, post_lock is invalid for the queue. Signed-off-by:
Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
-
Shmulik Ladkani authored
When using an ip6tnl device in collect_md mode, the xmit methods ignore the ipv6.src field present in skb_tunnel_info's key, both for route calculation purposes (flowi6 construction) and for assigning the packet's final ipv6h->saddr. This makes it impossible specifying a desired ipv6 local address in the encapsulating header (for example, when using tc action tunnel_key). This is also not aligned with behavior of ipip (ipv4) in collect_md mode, where the key->u.ipv4.src gets used. Fix, by assigning fl6.saddr with given key->u.ipv6.src. In case ipv6.src is not specified, ip6_tnl_xmit uses existing saddr selection code. Fixes: 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by:
Shmulik Ladkani <shmulik.ladkani@gmail.com> Reviewed-by:
Eyal Birger <eyal.birger@gmail.com> Signed-off-by:
-
Vlad Buslov authored
fl_reoffload implementation sets following members of struct tc_cls_flower_offload incorrectly: - masked key instead of mask - key instead of masked key Fix fl_reoffload to provide correct data to offload callback. Fixes: 31533cba ("net: sched: cls_flower: implement offload tcf_proto_op") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
David S. Miller authored
Simon Horman says: ==================== nfp: flower: tunnel TTL & TOS, and Geneve options set & match support this series contains updates for the TC Flower classifier and the offload facility for it in the NFP driver. * Patches 1 & 2: update the NFP driver to allow offload of matching and setting tunnel ToS/TTL of flows using the TC Flower classifier and tun_key action * Patches 3 & 4: enhance the flow dissector and TC Flower classifier to allow match on Geneve options * Patch 5 & 6: update the NFP driver to allow offload of matching and setting Geneve options of flows using the TC Flower classifier and tun_key action ==================== Signed-off-by: -
Pieter Jansen van Vuuren authored
Introduce a new layer for matching on geneve options. This allows offloading filters configured to match geneve with options. Signed-off-by:
Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Pieter Jansen van Vuuren authored
Introduce new push geneve option action. This allows offloading filters configured to entunnel geneve with options. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Pieter Jansen van Vuuren authored
Allow matching on options in Geneve tunnel headers. This makes use of existing tunnel metadata support. The options can be described in the form CLASS:TYPE:DATA/CLASS_MASK:TYPE_MASK:DATA_MASK, where CLASS is represented as a 16bit hexadecimal value, TYPE as an 8bit hexadecimal value and DATA as a variable length hexadecimal value. e.g. # ip link add name geneve0 type geneve dstport 0 external # tc qdisc add dev geneve0 ingress # tc filter add dev geneve0 protocol ip parent ffff: \ flower \ enc_src_ip 10.0.99.192 \ enc_dst_ip 10.0.99.193 \ enc_key_id 11 \ geneve_opts 0102:80:1122334421314151/ffff:ff:ffffffffffffffff \ ip_proto udp \ action mirred egress redirect dev eth1 This patch adds support for matching Geneve options in the order supplied by the user. This leads to an efficient implementation in the software datapath (and in our opinion hardware datapaths that offload this feature). It is also compatible with Geneve options matching provided by the Open vSwitch kernel datapath which is relevant here as the Flower classifier may be used as a mechanism to program flows into hardware as a form of Open vSwitch datapath offload (sometimes referred to as OVS-TC). The netlink Kernel/Userspace API may be extended, for example by adding a flag, if other matching options are desired, for example matching given options in any order. This would require an implementation in the TC software datapath. And be done in a way that drivers that facilitate offload of the Flower classifier can reject or accept such flows based on hardware datapath capabilities. This approach was discussed and agreed on at Netconf 2017 in Seoul. Signed-off-by: -
Simon Horman authored
Allow the existing 'dissection' of tunnel metadata to 'dissect' options already present in tunnel metadata. This dissection is controlled by a new dissector key, FLOW_DISSECTOR_KEY_ENC_OPTS. This dissection only occurs when skb_flow_dissect_tunnel_info() is called, currently only the Flower classifier makes that call. So there should be no impact on other users of the flow dissector. This is in preparation for allowing the flower classifier to match on Geneve options. Signed-off-by:
-
John Hurley authored
The addition of FLOW_DISSECTOR_KEY_ENC_IP to TC flower means that the ToS and TTL of the tunnel header can now be matched on. Extend the NFP tunnel match function to include these new fields. Signed-off-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
-
John Hurley authored
The TTL for encapsulating headers in IPv4 UDP tunnels is taken from a route lookup. Modify this to first check if a user has specified a TTL to be used in the TC action. Signed-off-by:
-
Jacob Keller authored
This function accidentally failed to update the data pointer, which caused the reported stats to be incorrect. Additionally, statistics which follow queue stats in the output would potentially read non-zeroed garbage data from the ethtool buffer. This occurred because the data double pointer was not dereferenced before incrementing the size. Additionally, make sure this issue is more visible by adding a WARN_ONCE to the i40e_get_ethtool_stats function. This warning will trigger whenever the data pointer is not at the expected address, similar to the check that we make in the i40e_get_stat_strings() function. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Piotr Azarewicz authored
During switching between old NVM structure approach (called structured NVM) to new one (called flat NVM) or backward flash needs to be rearranged to required NVM structure. This is a part of transition from one NVM structure to another. The function is introduced to command firmware to start rearrangement process. Signed-off-by:
Piotr Azarewicz <piotr.azarewicz@intel.com> Tested-by:
-
Piotr Azarewicz authored
Firmware can return a busy state, so the function return I40E_ERR_NOT_READY. Signed-off-by:
-
Jacob Keller authored
In commit 147e81ec ("i40e: Test memory before ethtool alloc succeeds") code was added to handle ring allocation on systems with low memory. It shadowed the ring parameter pointer by introducing a local ring pointer inside the for loop. Most of the code in the loop already just accessed the ring via &rx_rings[i]. Since most of the code already does this, just remove the local variable. If someone considers it worth keeping a local around, they should use it for the whole section instead of just a couple of accesses. This fixes a warning when -Wshadow is enabled Signed-off-by:
-
Jacob Keller authored
Commit c61c8fe1 ("i40e: Implement an ethtool private flag to stop LLDP in FW") added an extra for-loop which added a shadowing 'i' variable as the index. However, the local variable i already exists, and we already use it as a loop index. Additionally, at this point, there is no further use of the variable, so it's safe to simply overwrite the variable contents. This fixes a -Wshadow warning which has started being enabled on some distributions Signed-off-by:
Patryk Malek <patryk.malek@intel.com> Tested-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: Support Wake-on-LAN using filters This is technically a v2, but this patch series builds on your feedback and defines the following: - a new WAKE_* bit: WAKE_FILTER which can be enabled alongside other type of Wake-on-LAN to support waking up on a programmed filter (match + action) - a new RX_CLS_FLOW_WAKE flow action which can be specified by an user when inserting a flow using ethtool::rxnfc, similar to the existing RX_CLS_FLOW_DISC The bcm_sf2 and bcmsysport drivers are updated accordingly to work in concert to allow matching packets at the switch level, identified by their filter location to be used as a match by the SYSTEM PORT (CPU/management controller) during Wake-on-LAN. Let me know if this looks better than the previous incarnation of the patch series. Attached is also the ethtool patch that I would be submitting once the uapi changes are committed. Thank you! Changes in v2: - bail out earlier in bcm_sf2_cfp's get_rxnfc if an error is encountered (Andrew) ==================== Signed-off-by: -
Florian Fainelli authored
The SYSTEMPORT MAC allows up to 8 filters to be programmed to wake-up from LAN. Verify that we have up to 8 filters and program them to the appropriate RXCHK entries to be matched (along with their masks). We need to update the entry and exit to Wake-on-LAN mode to keep the RXCHK engine running to match during suspend, but this is otherwise fairly similar to Magic Packet detection. Signed-off-by:
-
Florian Fainelli authored
Allow propagating ethtool::rxnfc programming to the CPU/management port such that it is possible for such a CPU to perform e.g: Wake-on-LAN using filters configured by the switch. We need a tiny bit of cooperation between the switch drivers which is able to do the full flow matching, whereas the CPU/management port might not. The CPU/management driver needs to return -EOPNOTSUPP to indicate an non critical error, any other error code otherwise. Signed-off-by:
-
Florian Fainelli authored
Add the ability to specify through ethtool::rxnfc that a rule location is special and will be used to participate in Wake-on-LAN, by e.g: having a specific pattern be matched. When this is the case, fs->ring_cookie must be set to the special value RX_CLS_FLOW_WAKE. We also define an additional ethtool::wolinfo flag: WAKE_FILTER which can be used to configure an Ethernet adapter to allow Wake-on-LAN using previously programmed filters. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-08-07 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add cgroup local storage for BPF programs, which provides a fast accessible memory for storing various per-cgroup data like number of transmitted packets, etc, from Roman. 2) Support bpf_get_socket_cookie() BPF helper in several more program types that have a full socket available, from Andrey. 3) Significantly improve the performance of perf events which are reported from BPF offload. Also convert a couple of BPF AF_XDP samples overto use libbpf, both from Jakub. 4) seg6local LWT provides the End.DT6 action, which allows to decapsulate an outer IPv6 header containing a Segment Routing Header. Adds this action now to the seg6local BPF interface, from Mathieu. 5) Do not mark dst register as unbounded in MOV64 instruction when both src and dst register are the same, from Arthur. 6) Define u_smp_rmb() and u_smp_wmb() to their respective barrier instructions on arm64 for the AF_XDP sample code, from Brian. 7) Convert the tcp_client.py and tcp_server.py BPF selftest scripts over from Python 2 to Python 3, from Jeremy. 8) Enable BTF build flags to the BPF sample code Makefile, from Taeung. 9) Remove an unnecessary rcu_read_lock() in run_lwt_bpf(), from Taehee. 10) Several improvements to the README.rst from the BPF documentation to make it more consistent with RST format, from Tobin. 11) Replace all occurrences of strerror() by calls to strerror_r() in libbpf and fix a FORTIFY_SOURCE build error along with it, from Thomas. 12) Fix a bug in bpftool's get_btf() function to correctly propagate an error via PTR_ERR(), from Yue. ==================== Signed-off-by: -
Alexander Aring authored
This patch fixes the following sparse warning about mismatch rcu attribute for address space annotation: ... error: incompatible types in comparison expression (different modifiers) error: incompatible types in comparison expression (different address spaces) ... Some __rcu annotation was at non-pointers list head structures and one was missing in edge information which is used by rcu_assign_pointer() to update edge setting information. Cc: Stefan Schmidt <stefan@datenfreihafen.org> Fixes: f25da51f ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by:
Alexander Aring <aring@mojatatu.com> Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Jacob Keller authored
The priority flow control statistics are laid out in the stats structure using arrays. This made it unwieldy to use as part of an i40e_stats array. Add a new structure type, i40e_pfc_stats, and a helper function i40e_get_pfc_stats which can return the stats for a given priority value as an i40e_pfc_stats structure. Use this to create an i40e_stats array, which we'll use to format and copy the strings and stats into the supplied buffers. This reduces even more boiler plate code in i40e_get_ethtool_stats and i40e_get_stat_strings. An alternative would be to modify the structure definition for the pfc stats, but this is more invasive to the rest of the code base. Note that a macro was used to setup the copy of stats from the pf->stats, as this reduces the chance of typos in the code names. It will produce a checkpatch.pl warning due to re-use of a macro argument. In this case, it should be safe, as the macro will fail to compile in cases where the argument is not a simple structure member name, and thus arguments with side effects should not be an issue. Signed-off-by:
-
