Add slot and channel count programming to hdmi_chmap object and
move the chmap_ops to core. Use register_chmap_ops API to
register for default ops.  Override specific chmap ops in the
driver.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

With this chmap object is added as private data and new ops are
added to access driver specific chmap.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

chmap object represents multichannel capability and contains chmap
ops. Legacy driver is updated to use this.

With next set of patches chmap object is moved to common to be
reused by other drivers (ex: skylake ASoC hdmi driver).
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

More inspection of code revealed few more typos so fix them as well
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Found few typos while looking at code, so fix them
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Stream states were explained in the code comments but
SNDRV_PCM_STATE_PREPARED was missed so add it
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Allow writes in SNDRV_PCM_STATE_PREPARED state so that more
than one buffer fragment can be written from user space
before calling SNDRV_COMPRESS_START.
Signed-off-by: Eric Laurent <elaurent@google.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This header is used as-is in the alsa-lib userland library,
which is portable to other operating systems.
For this reason, include linux/types.h only on Linux systems.

Add sys/ioctl.h for _IOR/_IOW/etc. (works at least on *BSD and Solaris).
Signed-off-by: Thomas Klausner <wiz@NetBSD.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Resolved the conflicts with the latest HDA HDMI fixes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Defer to register acomp eld notifier until hdmi audio driver
is fully ready.

After registering eld notifier, gfx driver can use this
callback function to notify audio driver the monitor
connection event. However this action may happen when
audio driver is adding the pins or doing other initialization.
This is not always safe, however. For example, using
per_pin->lock before the lock is initialized.

Let's register the eld notifier after the initialization is done.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

To make sure audio_ptr is set before intel_audio_codec_enable()
or intel_audio_codec_disable() calling pin_eld_notify(),
this patch adds wmb barrier to prevent optimizing.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch applies the microphone-related fix created for the Acer
Aspire E1-572 to the E1-472 as well, as it uses the same Realtek ALC282
CODEC and demonstrates the same issues.

This patch allows an external, headset microphone to be used and limits
the gain on the (quite noisy) internal microphone.
Signed-off-by: Simon South <simon@simonsouth.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

While registering pardev, the irq_func was also registered. As a result
when we tried to probe for the card, an interrupt was generated and in
the ISR we tried to dereference private_data. But private_data is still
NULL as we have not yet done portman_create(). Lets probe for the device
after card is created.

Fixes: e6a1b7e8 ("ALSA: portman2x4 - use new parport device model")
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The OSS sequencer client tries to drain the pending events at
releasing.  Unfortunately, as spotted by syzkaller fuzzer, this may
lead to an unkillable process state when the event has been queued at
the far future.  Since the process being released can't be signaled
any longer, it remains and waits for the echo-back event in that far
future.

Back to history, the draining feature was implemented at the time we
misinterpreted POSIX definition for blocking file operation.
Actually, such a behavior is superfluous at release, and we should
just release the device as is instead of keeping it up forever.

This patch just removes the draining call that may block the release
for too long time unexpectedly.

BugLink: http://lkml.kernel.org/r/CACT4Y+Y4kD-aBGj37rf-xBw9bH3GMU6P+MYg4W1e-s-paVD2pg@mail.gmail.comReported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Plantronics DA45 does not support reading the sample rate which leads
to many lines of "cannot get freq at ep 0x4" and "cannot get freq at
ep 0x84". This patch adds the USB ID of the DA45 to quirks.c and
avoids those error messages.
Signed-off-by: Dennis Kadioglu <denk@post.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

hdmi_find_pcm_slot return -EBUSY when not no pcm slot found,
not -ENODEV. So the caller should compare with -EBUSY.

Fixes: a76056f2 ('ALSA: hda - hdmi dynamically bind PCM to pin when monitor hotplug')
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

snd-hdsp driver accesses enum item values (int) instead of boolean
values (long) wrongly for some ctl elements.  This patch fixes them.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

HDSPM driver contains a code issuing zero-division potentially in
system sample rate ctl code.  This patch fixes it by not processing
a zero or invalid rate value as a divisor, as well as excluding the
invalid value to be passed via the given ctl element.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

snd-hdspm driver accesses enum item values (int) instead of boolean
values (long) wrongly for some ctl elements.  This patch fixes them.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

SNDRV_SEQ_IOCTL_{GET|SET}_QUEUE_OWNER and *_{GET|SET}_QUEUE_SYNC
ioctls have been never implemented.  Get rid of the definitions from
uapi header file.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Back-merge of for-linus branch for further API/ABI cleanups.

While registering pardev, the irq_func was also registered. As a
result when we tried to probe for the card, an interrupt was generated
and in the ISR we tried to dereference private_data. But private_data
is still NULL as we have not yet done snd_mts64_create(). Lets probe
for the card after mts64 is created.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Fixes: 94a57350 ("ALSA: mts64: use new parport device model")
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

X32 ABI takes the 64bit timespec, thus the timer user status ioctl becomes
incompatible with IA32.  This results in NOTTY error when the ioctl is
issued.

Meanwhile, this struct in X32 is essentially identical with the one in
X86-64, so we can just bypassing to the existing code for this
specific compat ioctl.

Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The timer user status compat ioctl returned the bogus struct used for
64bit architectures instead of the 32bit one.  This patch addresses
it to return the proper struct.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Like the previous fixes for ctl and PCM, we need a fix for
incompatible X32 ABI regarding the rawmidi: namely, struct
snd_rawmidi_status has the timespec, and the size and the alignment on
X32 differ from IA32.

This patch fixes the incompatible ioctl for X32.

Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Instead of open-coding, use the existing helper to copy a 32bit
timespec from/to 64bit.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

X32 ABI uses the 64bit timespec in addition to 64bit alignment of
64bit values.  This leads to incompatibilities in some PCM ioctls
involved with snd_pcm_channel_info, snd_pcm_status and
snd_pcm_sync_ptr structs.  Fix the PCM compat ABI for these ioctls
like the previous commit for ctl API.
Reported-by: Steven Newbury <steve@snewbury.org.uk>
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The X32 ABI takes the same alignment like x86-64, and this may result
in the incompatible struct size from ia32.  Unfortunately, we hit this
in some control ABI: struct snd_ctl_elem_value differs between them
due to the position of 64bit variable array.  This ends up with the
unknown ioctl (ENOTTY) error.

The fix is to add the compat entries for the new aligned struct.
Reported-and-tested-by: Steven Newbury <steve@snewbury.org.uk>
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This commit drops implementation of duplex streams synchronization
from ALSA dice driver, due to a reason of hardware design. This patch
allows dice-based units to generate sounds correctly when isochronous
packet streaming starts at first time.

In IEC 61883-6:2005, CIP packetization layer for AM824 data format
utilizes the value of SYT field in CIP header of received packet for
a reference to phase lock loop. Figure 3 in clause 4.3 describes it.
The value is an offset from cycle_time field of every cycle start packet
from cycle master on IEEE 1394 bus. The time calculated with these two
fields is called as 'presentation timestamp' which represents the time
to play data included in the packet.

Although, this idea includes some problems due to accuracy of timekeep in
cycle master, accuracy of transmission of cycle start packet on the bus
with the other units, accuracy of sampling clock in data transmitter side
and accuracy of replay in data receiver side. In most case, these
accuracies somewhat worse because there's no such ideal hardwares in this
world.

For the issues, ASICs for Dice include Jitter Elimination Technologies
(JET) PLL. The PLL can handle several sources of clock and compensate it
with high-precision internal clock source. The sequence of value in syt
field of received AMDTP packets is one of the sources, therefore
transmitters on IEEE 1394 bus should transfer it.

On the other hand, current ALSA dice driver is programmed with a mode of
duplex streams with synchronization. In this mode, the driver outputs
packets after some incoming packets are handled, to re-use the value of
SYT field in incoming packets to the value for outgoing packets. This mode
is enabled when source signal of sampling clock is set to internal, and
this is a major use case. Thus, in most cases, the unit receives no packets
during a short time after packet streaming starts.

As long as I experienced, this causes the units to generate no sounds at
first time to receive packets. This issue occurs only with Dice II. I guess
this is due to a quirk of the PLL. In short, the PLL cannot generate firm
signals to ADCs/DACs or the other ICs when no packets are received in the
beginning of packet streaming. While, on second time or later, the unit
generates sound correctly. I guess that starting packet streaming at first
time sets the PLL correctly.

Well, still based on my hypothesis and no way to prove it, this commit
drops duplex streams synchronization from this driver. At least, the PLL
requires the sequence of value in SYT field of received AMDTP packets as
one of source of clock signals with internal clock source.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

azx_probe_continue() uses pm_runtime_put_noidle() to drop the rpm
usage_count, which means that if it's the last reference the
autosuspend of the controller won't actually happen. So if the codecs
autosuspend before the azx_probe_continue() drops the last
reference we'll fail to autosuspend the controller. This does happen
in practice, but not every time. As can be seen in [1] the controller
autosuspend attempt fails due to the usage_count when suspending the
codecs. A bit later we see the the contoller usage_count dropping to
zero without further attempts at autosuspend.

Fix the problem by using pm_runtime_put_autosuspend() instead, which
will kick off the autosuspend of the controller even if the codecs
are already asleep. As can be seen in [2] the controller autosuspend
still fails while suspending the codecs, but later on we see another
autosuspend attempt after dropping the usage_count to 0.

I was also a bit worried that there might still be a race between the
controller autosuspend and the rest of the code in azx_probe_continue().
So I also tried replacing the the put_noidle() with put_sync_suspend().
No explosions occurred, so I'm somewhat satisfied that there are no
serious problems in this area.

[1]
 kworker/1:2-122   [001] ....    63.661310: __pm_runtime_suspend: hdaudioC0D0 usage_count 0
 kworker/1:2-122   [001] d..2    63.661316: rpm_suspend: hdaudioC0D0 flags-d cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/1:2-122   [001] d..1    63.661317: rpm_check_suspend_allowed: hdaudioC0D0 retval 0
 kworker/1:2-122   [001] d..2    63.661332: rpm_return_int: rpm_suspend+0x406/0x5e8:hdaudioC0D0 ret=0
 kworker/1:1-72    [001] d..2    63.661543: rpm_suspend: hdaudioC0D0 flags-a cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/1:1-72    [001] d..1    63.661544: rpm_check_suspend_allowed: hdaudioC0D0 retval 0
 kworker/1:1-72    [001] ....    63.661545: hda_codec_runtime_suspend: hdaudioC0D0 suspend
 kworker/1:1-72    [001] d..2    63.661614: rpm_idle: 0000:00:03.0 flags-1 cnt-1  dep-0  auto-1 p-0 irq-0 child-0
 kworker/1:1-72    [001] d..1    63.661615: rpm_check_suspend_allowed: 0000:00:03.0 usage_count 1
 kworker/1:1-72    [001] d..1    63.661615: rpm_check_suspend_allowed: 0000:00:03.0 retval -11
 kworker/1:1-72    [001] d..2    63.661616: rpm_return_int: rpm_idle+0x249/0x487:0000:00:03.0 ret=-11
 kworker/1:1-72    [001] d..2    63.661616: rpm_return_int: rpm_suspend+0x406/0x5e8:hdaudioC0D0 ret=0
 kworker/1:2-122   [001] d..2    63.664834: rpm_idle: hdaudioC0D0 flags-8 cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/1:2-122   [001] d..1    63.664835: rpm_check_suspend_allowed: hdaudioC0D0 retval 1
 kworker/1:2-122   [001] d..2    63.664836: rpm_return_int: rpm_idle+0x249/0x487:hdaudioC0D0 ret=-11
 kworker/1:2-122   [001] d..2    63.664841: rpm_idle: hdaudioC0D0 flags-8 cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/1:2-122   [001] d..1    63.664841: rpm_check_suspend_allowed: hdaudioC0D0 retval 1
 kworker/1:2-122   [001] d..2    63.664841: rpm_return_int: rpm_idle+0x249/0x487:hdaudioC0D0 ret=-11
 kworker/1:2-122   [001] ....    63.664842: azx_probe_continue: 0000:00:03.0 usage_count=0

[2]
 kworker/0:0-4     [000] ....    50.354567: __pm_runtime_suspend: hdaudioC0D0 usage_count 0
 kworker/0:0-4     [000] d..2    50.354574: rpm_suspend: hdaudioC0D0 flags-d cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:0-4     [000] d..1    50.354575: rpm_check_suspend_allowed: hdaudioC0D0 retval 0
 kworker/0:0-4     [000] d..2    50.354589: rpm_return_int: rpm_suspend+0x406/0x5e8:hdaudioC0D0 ret=0
 kworker/0:2-135   [000] d..2    50.354809: rpm_suspend: hdaudioC0D0 flags-a cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:2-135   [000] d..1    50.354810: rpm_check_suspend_allowed: hdaudioC0D0 retval 0
 kworker/0:2-135   [000] ....    50.354816: hda_codec_runtime_suspend: hdaudioC0D0 suspend
 kworker/0:2-135   [000] d..2    50.354908: rpm_idle: 0000:00:03.0 flags-1 cnt-1  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:2-135   [000] d..1    50.354909: rpm_check_suspend_allowed: 0000:00:03.0 usage_count 1
 kworker/0:2-135   [000] d..1    50.354909: rpm_check_suspend_allowed: 0000:00:03.0 retval -11
 kworker/0:2-135   [000] d..2    50.354909: rpm_return_int: rpm_idle+0x249/0x487:0000:00:03.0 ret=-11
 kworker/0:2-135   [000] d..2    50.354910: rpm_return_int: rpm_suspend+0x406/0x5e8:hdaudioC0D0 ret=0
 kworker/0:0-4     [000] d..2    50.373791: rpm_idle: hdaudioC0D0 flags-8 cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:0-4     [000] d..1    50.373792: rpm_check_suspend_allowed: hdaudioC0D0 retval 1
 kworker/0:0-4     [000] d..2    50.373793: rpm_return_int: rpm_idle+0x249/0x487:hdaudioC0D0 ret=-11
 kworker/0:0-4     [000] d..2    50.373797: rpm_idle: hdaudioC0D0 flags-8 cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:0-4     [000] d..1    50.373798: rpm_check_suspend_allowed: hdaudioC0D0 retval 1
 kworker/0:0-4     [000] d..2    50.373798: rpm_return_int: rpm_idle+0x249/0x487:hdaudioC0D0 ret=-11
 kworker/0:0-4     [000] ....    50.373799: __pm_runtime_suspend: 0000:00:03.0 usage_count 0
 kworker/0:0-4     [000] d..2    50.373800: rpm_suspend: 0000:00:03.0 flags-d cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:0-4     [000] d..1    50.373800: rpm_check_suspend_allowed: 0000:00:03.0 retval 0
 kworker/0:0-4     [000] d..2    50.373803: rpm_return_int: rpm_suspend+0x406/0x5e8:0000:00:03.0 ret=0
 kworker/0:0-4     [000] d..2    50.385164: rpm_suspend: 0000:00:03.0 flags-a cnt-0  dep-0  auto-1 p-0 irq-0 child-0
 kworker/0:0-4     [000] d..1    50.385165: rpm_check_suspend_allowed: 0000:00:03.0 retval 0
 kworker/0:0-4     [000] ....    50.385174: azx_runtime_suspend: 0000:00:03.0 azx suspend releaseing power well
 kworker/0:0-4     [000] ....    50.385179: azx_runtime_suspend: 0000:00:03.0 azx suspend
 kworker/0:0-4     [000] d..2    50.386872: rpm_return_int: rpm_suspend+0x406/0x5e8:0000:00:03.0 ret=0
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Currently the interrupt handler of HD-audio driver assumes that no irq
update is needed while processing the irq.  But in reality, it has
been confirmed that the HW irq is issued even during the irq
handling.  Since we clear the irq status at the beginning, process the
interrupt, then exits from the handler, the lately issued interrupt is
left untouched without being properly processed.

This patch changes the interrupt handler code to loop over the
check-and-process.  The handler tries repeatedly as long as the IRQ
status are turned on, and either stream or CORB/RIRB is handled.

For checking the stream handling, snd_hdac_bus_handle_stream_irq()
returns a value indicating the stream indices bits.  Other than that,
the change is only in the irq handler itself.
Reported-by: Libin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

HP EliteBook 755 G2 with ALC3228 (ALC280) codec [103c:221c] requires
the known fixup (ALC269_FIXUP_HEADSET_MIC) for making the headset mic
working.  Also, it suffers from the loopback noise problem, so we
should disable aamix path as well.
Reported-by: Derick Eddington <derick.eddington@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

On one of the machines we enable, we found that the actual speaker volume
did not always correspond to the volume set in alsamixer. This patch
fixes that problem.

This patch was orginally written by Kailang @ Realtek, I've rebased it
to fit sound git master.

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1549660Co-Authored-By: Kailang <kailang@realtek.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

After login to the desktop on Dell Inspiron 3162,
there's a very loud background noise comes from the builtin speaker.
The noise does not go away even if the speaker is muted.

The noise disappears after using the aamix fixup.

Codec: Realtek ALC3234
Address: 0
AFG Function Id: 0x1 (unsol 1)
    Vendor Id: 0x10ec0255
    Subsystem Id: 0x10280725
    Revision Id: 0x100002
    No Modem Function Group found

BugLink: http://bugs.launchpad.net/bugs/1549620Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

With a previous commit, ALSA oxfw driver retries transferring MIDI
messages at transaction failure for scs1x. On the other hand, there're
fatal transaction error. Then, no MIDI messages reach to the unit anymore.
In this case, MIDI substream should be terminated.

This commit stops MIDI transmission after the fatal error occurs.
Unfortunately, unlike ALSA PCM functionality, ALSA rawmidi core has no
feature to discontinue MIDI substream runtime in kernel side, thus this
commit just stops MIDI transmission without notifying it to userspace.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Currently, ALSA oxfw driver has a TODO to retry MIDI transferring
at transaction failure.

This commit achieves it. Current implementation uses snd_rawmidi_transmit()
to transfer messages, thus the target MIDI messages are not in buffer when
transaction failure is detected. Although we cannot use a pair of
snd_rawmidi_transmit_peek() and snd_ramwidi_transmit_ack(), the
messages are still in scs1x specific structure and the data is available
for retries.

This commit adds a member to the structure for the length of buffered
messages, and uses the value again at retries.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

eld control is created based on pcm now.
When monitor is connected, eld control will be bound to
pin automatically.
Signed-off-by: Libin Yang <libin.yang@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Since the recent integration of kctl jack and input jack layers, we
can basically build the jack layer even without input devices.  That
is, the jack layer itself can be built with conditional to enable the
input device support or not, while the users may enable always
CONFIG_SND_JACK unconditionally.

For achieving it, this patch changes the following:
- A new Kconfig, CONFIG_SND_JACK_INPUT_DEV, was introduced to indicate
  whether the jack layer supports the input device,
- A few items in snd_jack struct and relevant codes are conditionally
  built upon CONFIG_SND_JACK_INPUT_DEV,
- The users of CONFIG_SND_JACK drop the messy dependency on
  CONFIG_INPUT.

This change also automagically fixes a potential bug in HD-audio
driver Arnd reported, where the NULL or uninitialized jack instance is
dereferenced.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>