- 06 Aug, 2020 13 commits
-
-
Dave Airlie authored
This will allow the driver to control the ordering here better. Eventually the old path will be removed. v2: add docs for new APIs. rename new path to ttm_mem_type_manager_init/set_used(for now) Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200804025632.3868079-14-airlied@gmail.com
-
Dave Airlie authored
This code was assuming there was a drm_mm here, don't do that call the correct API. v2: use the new exported interface. Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Dave Airlie authored
v2: use the new exported interface. This code was poking inside a struct and assuming it was a drm_mm at the start. Call the proper API. Reviewed-by:
-
Dave Airlie authored
Acked-by:
-
Dave Airlie authored
Acked-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Dave Airlie authored
As suggested on review, just export the memory type debug for drivers to use, while also making the debug callback optional (don't need to test for system as it won't init it). rename it to be more consistent with object name for now. (we may rename all the objects later.) Reviewed-by:
-
Dave Airlie authored
The default path for populate/unpopulate is already this. Reviewed-by:
-
Dave Airlie authored
The pattern was repeated a few times, just make an inline for it. Reviewed-by:
-
Dave Airlie authored
Drop the WARN_ON and consolidate the two paths into one. Use the consolidate slowpath in the execbuf utils code. Reviewed-by:
-
Dave Airlie authored
Reviewed-by:
-
Dave Airlie authored
Instead of rolling driver copies of them. v2: cleanup return handling (Ben) Reviewed-by:
-
Dave Airlie authored
The map one was used once, just inline it, and drop them both. Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Dave Airlie authored
These two functions has the same code in them, create a common helper function instead. Reviewed-by:
-
- 05 Aug, 2020 2 commits
-
-
Tom Rix authored
clang static analysis reports this repesentative error pvr2fb.c:1049:2: warning: 1st function call argument is an uninitialized value [core.CallAndMessage] if (*cable_arg) ^~~~~~~~~~~~~~~ Problem is that cable_arg depends on the input loop to set the cable_arg[0]. If it does not, then some random value from the stack is used. A similar problem exists for output_arg. So initialize cable_arg and output_arg. Signed-off-by:Tom Rix <trix@redhat.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200720191845.20115-1-trix@redhat.com
-
Thomas Zimmermann authored
The initial value of the PCI option register got lost while refactoring the driver init code. Restore the setting. Signed-off-by:
kernel test robot <lkp@intel.com> Fixes: 2021708e ("drm/mgag200: Initialize PCI registers early during device setup") Cc: Lyude Paul <lyude@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Emil Velikov <emil.velikov@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200804065158.21049-1-tzimmermann@suse.de
-
- 03 Aug, 2020 20 commits
-
-
Gustavo A. R. Silva authored
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
Linus Walleij authored
The hdmi4.c and hdmi5.c files include the legacy GPIO header <linux/gpio.h> but does not use any of the symbols from this file. What it does use is the implicit inclusion of <linux/of.h> leading to compile errors if we just drop this include. Include the right header. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Thomas Zimmermann authored
Removes trailing whitespaces in several places. Signed-off-by:
-
Thomas Zimmermann authored
This patch adds support for G200 desktop cards. We can reuse the whole memory and modesetting code. A few PCI and DAC register values have to be updated accordingly. The most significant change is in the PLL setup. The driver parses the device's BIOS to retrieve clock limits and reference clocks. With no BIOS found, safe defaults are being used. v2: * copy BIOS ROM to system memory and access with regular load/store; resolves potential HW limitations * fix some stray whitespaces Signed-off-by:
Egbert Eich <eich@suse.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200730102844.10995-9-tzimmermann@suse.de
-
Thomas Zimmermann authored
The unique revision id is only useful for G200SE devices. Store the value in model-specific data within struct mga_device. While at it, the patch also adds an init helper for the value. Signed-off-by:
-
Thomas Zimmermann authored
The modesetting code initialized the memory-related register CRTCEXT4. Move this code to MM initialization. Signed-off-by:
-
Thomas Zimmermann authored
The modesetting code initialized several memory-related flags in the MISC register. Move this code to MM initialization. Signed-off-by:
-
Thomas Zimmermann authored
MGA cards can run in traditional VGA mode or an enhanced MGA mode; with the latter being required for KMS. So far, MGA mode was enabled during modesetting. As it's fundamental for device operation, the patch moves it next to the device register setup. Signed-off-by:
-
Thomas Zimmermann authored
So far, PCI option registers were initialized as part of modesetting, which is late in the process. As these registers control fundamental operation, they should be set early. The patch moves the PCI option handling into device register setup, before even the device MMIO memory is being mapped. No functional changes made. Moving the PCI code next to the device-register setup also allows to remove the has_sdram field from struct mga_device. The state is now local to the init helper. Signed-off-by:
-
Thomas Zimmermann authored
The mgag200 driver maps registers into the address space. Move the code into a separate helper function. No functional changes. One small difference is in the handling of SDRAM/SGRAM. MGA devices can come with either SDRAM or SGRAM. So far, the driver checked for SDRAM, which is the common case. The patch moves this code into a separate helper and checks for SGRAM, which is the special case. The test itself is the same as before. Signed-off-by:
-
Thomas Zimmermann authored
SHMEM pages use write-combine caching by default, but can also use the platform's default page caching. Doing so may improve the performance of I/O on the framebuffer. Mgag200's hardware does not access framebuffer pages directly (i.e., via DMA), so enabling caching does not have an effect on consistency of the framebuffer memory or the displayed data. Signed-off-by:
-
Thomas Zimmermann authored
This turns the ast's device cleanup code into a managed release helper function. Note that the code uses devres helpers. The release function switches the device back to VGA mode and therefore runs during HW device cleanup; not at DRM device cleanup. Signed-off-by:
-
Thomas Zimmermann authored
The ast driver keeps a backup copy of the DP501 encoder's firmware. This patch adds managed release of the allocated memory. Signed-off-by:
-
Thomas Zimmermann authored
The ast driver loads firmware for the DP501 display encoder. The patch replaces the removal code with a managed release function. Signed-off-by:
-
Thomas Zimmermann authored
Turns struct ast_private into a subclass of struct drm_device by embedding the latter. This allows for using DRM's managed device allocation. The use of struct drm_device.dev_private is deprecated. The patch converts the last remaining users to to_ast_private(). Signed-off-by:
-
Thomas Zimmermann authored
Several places in ast use ast->dev, when a dev pointer is already available within the function. Remove the extra indirection. No functional changes made. This is just a small cleanup before embedding the DRM device instance in struct ast_private. Signed-off-by:
-
Thomas Zimmermann authored
The ast code still references dev_private in several place when looking up the ast device structure. Convert the remaining locations to use to_ast_private(). Signed-off-by:
-
Thomas Zimmermann authored
The ast driver's load and unload functions are left-overs from when struct drm_driver.load/unload was still in use. The PCI probe helper allocated the DRM device and ran load to initialize it. This patch replaces this code with device create and destroy. The main difference is that the device's create function allocates the DRM device and ast structures in the same place. This will be required for switching ast to managed allocations. Signed-off-by:
-
Thomas Zimmermann authored
Putting the DRM driver to the top of the file and the PCI code to the bottom makes ast_drv.c more readable. While at it, the patch prefixes file-scope variables with ast_. Signed-off-by:
-
Thomas Zimmermann authored
Only single instances of CRTC and connector are supported per device. Embed both in ast's structure and remove the individual memory allocations. DRM's CRTC cleanup helpers replace the rsp. destroy function in ast. While at it, also convert to_ast_connector() to a function. Signed-off-by:
-
- 02 Aug, 2020 5 commits
-
-
Daniel Vetter authored
Userspace can provoke this, we generally don't allow userspace to spam dmesg. Tune it down to debug. Unfortunately we don't have easy access to the drm_device here (not at all without changing a few things), so leave it as old style dmesg output for now. References: https://patchwork.freedesktop.org/series/80146/Acked-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: "Christian König" <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200801092625.1107609-1-daniel.vetter@ffwll.ch
-
Melissa Wen authored
The previous memset operation was not correctly zeroing the alpha channel to compute the crc, and as a result, the IGT subtest kms_cursor_crc/pipe-A-cursor-alpha-transparent fails. Fixes: db7f419c ("drm/vkms: Compute CRC with Cursor Plane") Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Signed-off-by:
-
Marek Vasut authored
Add support for the Chefree CH101OLHLWH-002 10.1" (1280x800) color TFT LCD panel, connected over LVDS. Timings are taken from the datasheet version P0.5. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: dri-devel@lists.freedesktop.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org Signed-off-by:
-
Marek Vasut authored
Add DT bindings for Chefree CH101OLHLWH-002 10.1" 1280x800 LCD. This panel is connected via LVDS. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org Signed-off-by:
-
Marek Vasut authored
The Chefree Technology Corp. is an LCD panel manufacturer. Signed-off-by:
-
