- 15 Jun, 2017 13 commits
-
-
Madhav Chauhan authored
This patch divides glk_dsi_device_ready() function into two part. First part will program LP wake and MIPI DSI mode to MIPI_CTRL reg using newly defined function glk_dsi_enable_io(). glk_dsi_enable_io() will be called from intel_dsi_pre_enable. Second part will do remaining device ready activities using the existing function glk_dsi_device_ready(). Signed-off-by:
Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497340095-5877-1-git-send-email-madhav.chauhan@intel.com
-
Dhinakaran Pandiyan authored
Maarten and Ville noticed that we are enabling backlight via DP aux very early in the modeset_init path via the intel_dp_aux_setup_backlight() function, since commit e7156c83 ("drm/i915: Add Backlight Control using DPCD for eDP connectors (v9)"). Looks like all we need to do during _setup_backlight() is read the current brightness state instead of modifying it. v2: Rewrote commit message. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Yetunde Adebisi <yetundex.adebisi@intel.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by:
Puthikorn Voravootivat <puthik@chromium.org> Fixes: e7156c83 ("drm/i915: Add Backlight Control using DPCD for eDP connectors (v9)") Link: http://patchwork.freedesktop.org/patch/msgid/1497384239-2965-1-git-send-email-dhinakaran.pandiyan@intel.comSigned-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com>
-
Colin Ian King authored
The function cnl_ddi_dp_set_dpll_hw_state does not need to be in global scope, so make it static. Cleans up sparse warning: "symbol 'cnl_ddi_dp_set_dpll_hw_state' was not declared. Should it be static?" Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170613134751.29196-1-colin.king@canonical.comReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Ville Syrjälä authored
With 830 the only thing needing pipe quirks, we can just drop the quirk defines and replace the checks with IS_I830() checks. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
-
Ville Syrjälä authored
The pipe A force quirk shouldn't needed except on 830. So let's nuke it for the IBM Thinkpad T60 945 machines. This quirk pre-dates KMS so it's usefulness is doubtful at best now. The original bug report [1] describes the symptoms as "system hang on closing T60 panel lid", and we already dropped a similar quirk for another 945 machine in commit 736a69ca ("drm/i915: Drop PIPE-A quirk for 945GSE HP Mini") so I'm hopeful we can drop this one as well. The quirk was added into xf86-video-intel in commit 08903abe4dc0 ("Add pipe a force enable quirk for Lenovo T60") [1] https://bugs.freedesktop.org/show_bug.cgi?id=16494Signed-off-by:
-
Ville Syrjälä authored
The pipe A force quirk shouldn't needed except on 830. So let's nuke it for the Toshiba Protege R-205/S-209 945 machines. This quirk pre-dates KMS so it's usefulness is doubtful at best now. Unfortunately the original bug report [1] isn't very helpful since it doesn't describe the symptoms. And the commit message in xf86-video-intel commit ecdb5963ef68 ("Add pipe A force enable quirk for Toshiba Portege R205-S209") is not much help either. However, if we assume the problem was the typical "closing the lid hangs the box" type of thing, we already nuked the quirk for another 945 machine in commit 736a69ca ("drm/i915: Drop PIPE-A quirk for 945GSE HP Mini") and so I hope we can drop this one as well. [1] https://bugs.freedesktop.org/show_bug.cgi?id=14944Signed-off-by: -
Ville Syrjälä authored
830 more or less requires both pipes and DPLLs to remain on as long as either pipe is needed. However, when neither pipe is actually needed, we can save a bit of power by turning everything off. To do that we add a new "power well" that turns both pipes and DPLLs on and off in the right order. Seems to save ~50mW on my Fujitsu-Siemens Lifebook S6010. This also avoids having to abuse the load detection to force pipe A on at init time. That was never very robust, and it only worked for one pipe, whereas 830 really needs both pipes enabled. As a bonus the 830 pipe quirk is now a bit more isolated from the rest of the mode setting infrastructure, which should mean that it's much less likely someone will accidentally break it in the future. The extra cost is of course slight code duplication, but that seems like a worthwile tradeoff here. v2; s/BIT/BIT_ULL/ Signed-off-by:
-
Ville Syrjälä authored
The magic "enable the DPLL three times" sequence feels like it deserves a loop. Signed-off-by:
-
Ville Syrjälä authored
If intel_crtc_disable_noatomic() were to ever get called during resume we'd end up deadlocking since resume has its own acqcuire_ctx but intel_crtc_disable_noatomic() still tries to use the mode_config.acquire_ctx. Pass down the correct acquire ctx from the top. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: e2c8b870 ("drm/i915: Use atomic helpers for suspend, v2.") Signed-off-by:
-
Ville Syrjälä authored
Pass down the correct acquire context to the pipe A quirk load detect hack during display resume. Avoids deadlocking the entire thing. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: e2c8b870 ("drm/i915: Use atomic helpers for suspend, v2.") Signed-off-by:
-
Chris Wilson authored
Currently the vma has one link member that is used for both holding its place in the execbuf reservation list, and in any eviction list. This dual property is quite tricky and error prone. Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170615081435.17699-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
This has the benefit of not requiring us to manipulate the vma->exec_link list when tearing down the execbuffer, and is a marginally cheaper test to detect the user error. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170615081435.17699-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
Combine the two slightly overlapping parameter structures we pass around the execbuffer routines into one. Signed-off-by:
-
- 14 Jun, 2017 16 commits
-
-
Lionel Landwerlin authored
Add OA support for Geminilake (pretty much identical to Broxton), and also add the associated OA configurations. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
Matthew Auld <matthew.auld@intel.com> Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Link: http://patchwork.freedesktop.org/patch/msgid/20170613112309.4088-2-lionel.g.landwerlin@intel.com
-
Lionel Landwerlin authored
Add OA support for Kabylake (pretty much identical to Skylake), and also add the associated OA configurations. Signed-off-by:
-
Lionel Landwerlin authored
Add macros to detect GT2/GT3 skus so we can apply the proper OA configuration later. Signed-off-by:
-
Robert Bragg authored
In earlier iterations of the i915-perf driver we had a number of callbacks/hooks from other parts of the i915 driver to e.g. notify us when a legacy context was pinned and these could run asynchronously with respect to the stream file operations and might also run in atomic context. dev_priv->perf.hook_lock had been for serialising access to state needed within these callbacks, but as the code has evolved some of the hooks have gone away or are implemented to avoid needing to lock any state. The remaining use of this lock was actually redundant considering how the gen7 oacontrol state used to be updated as part of a context pin hook. Signed-off-by:
Robert Bragg <robert@sixbynine.org> Signed-off-by:
-
Robert Bragg authored
An oa_exponent_to_ns() utility and per-gen timebase constants where recently removed when updating the tail pointer race condition WA, and this restores those so we can update the _PROP_OA_EXPONENT validation done in read_properties_unlocked() to not assume we have a 12.5MHz timebase as we did for Haswell. Accordingly the oa_sample_rate_hard_limit value that's referenced by proc_dointvec_minmax defining the absolute limit for the OA sampling frequency is now initialized to (timestamp_frequency / 2) instead of the 6.25MHz constant for Haswell. v2: Specify frequency of 19.2MHz for BXT (Ville) Initialize oa_sample_rate_hard_limit per-gen too (Lionel) Signed-off-by: -
Robert Bragg authored
These are auto generated from an XML description of metric sets, currently maintained in gputop, ref: https://github.com/rib/gputop > gputop-data/oa-*.xml > scripts/i915-perf-kernelgen.py $ make -C gputop-data -f Makefile.xml Signed-off-by:
-
Robert Bragg authored
Enables access to OA unit metrics for BDW, CHV, SKL and BXT which all share (more-or-less) the same OA unit design. Of particular note in comparison to Haswell: some OA unit HW config state has become per-context state and as a consequence it is somewhat more complicated to manage synchronous state changes from the cpu while there's no guarantee of what context (if any) is currently actively running on the gpu. The periodic sampling frequency which can be particularly useful for system-wide analysis (as opposed to command stream synchronised MI_REPORT_PERF_COUNT commands) is perhaps the most surprising state to have become per-context save and restored (while the OABUFFER destination is still a shared, system-wide resource). This support for gen8+ takes care to consider a number of timing challenges involved in synchronously updating per-context state primarily by programming all config state from the cpu and updating all current and saved contexts synchronously while the OA unit is still disabled. The driver intentionally avoids depending on command streamer programming to update OA state considering the lack of synchronization between the automatic loading of OACTXCONTROL state (that includes the periodic sampling state and enable state) on context restore and the parsing of any general purpose BB the driver can control. I.e. this implementation is careful to avoid the possibility of a context restore temporarily enabling any out-of-date periodic sampling state. In addition to the risk of transiently-out-of-date state being loaded automatically; there are also internal HW latencies involved in the loading of MUX configurations which would be difficult to account for from the command streamer (and we only want to enable the unit when once the MUX configuration is complete). Since the Gen8+ OA unit design no longer supports clock gating the unit off for a single given context (which effectively stopped any progress of counters while any other context was running) and instead supports tagging OA reports with a context ID for filtering on the CPU, it means we can no longer hide the system-wide progress of counters from a non-privileged application only interested in metrics for its own context. Although we could theoretically try and subtract the progress of other contexts before forwarding reports via read() we aren't in a position to filter reports captured via MI_REPORT_PERF_COUNT commands. As a result, for Gen8+, we always require the dev.i915.perf_stream_paranoid to be unset for any access to OA metrics if not root. v5: Drain submitted requests when enabling metric set to ensure no lite-restore erases the context image we just updated (Lionel) v6: In addition to drain, switch to kernel context & update all context in place (Chris) v7: Add missing mutex_unlock() if switching to kernel context fails (Matthew) v8: Simplify OA period/flex-eu-counters programming by using the batchbuffer instead of modifying ctx-image (Lionel) v9: Back to updating the context image (due to erroneous testing, batchbuffer programming the OA unit doesn't actually work) (Lionel) Pin context before updating context image (Chris) Drop MMIO programming now that we switch to a kernel context with right values in initial context image (Chris) v10: Just pin_map the contexts we want to modify or let the configuration happen on first use (Chris) v11: Update kernel context OA config through the batchbuffer rather than on the fly ctx-image update (Lionel) v12: Rework OA context registers update again by swithing away from user contexts and reconfiguring the kernel context through the batchbuffer and updating all the other contexts' context image. Also take care to lock slice/subslice configuration when OA is on. (Lionel) v13: Request rpcs updates on all engine when updating the OA config (Lionel) v14: Drop any kind of rpcs management now that we monitor sseu configuration changes in a later patch (Lionel) Remove usleep after programming the NOA configs on Gen8+, this doesn't seem to be needed (Lionel) v15: Respect coding style for block comments (Chris) v16: Add missing i915_add_request() in case we fail to emit OA configuration (Matthew) Signed-off-by: -
Robert Bragg authored
Adds a static OA unit, MUX, B Counter + Flex EU configurations for basic render metrics on Broadwell, Cherryview, Skylake and Broxton. These are auto generated from an XML description of metric sets, currently maintained in gputop, ref: https://github.com/rib/gputop > gputop-data/oa-*.xml > scripts/i915-perf-kernelgen.py $ make -C gputop-data -f Makefile.xml WHITELIST=RenderBasic v2: add newlines to debug messages + fix comment (Matthew Auld) Signed-off-by:
-
Lionel Landwerlin authored
Gen8+ might have mux configurations per slices/subslices. Depending on whether slices/subslices have been fused off, only part of the configuration needs to be applied. This change reworks the mux configurations query mechanism to allow more than one set of registers to be programmed. v2: s/n_mux_regs/n_mux_configs/ (Matthew) Signed-off-by:
-
Robert Bragg authored
Assuming a uniform mask across all slices, this enables userspace to determine the specific sub slices can be enabled. This information is required, for example, to be able to analyse some OA counter reports where the counter configuration depends on the HW sub slice configuration. Signed-off-by:
-
Robert Bragg authored
Enables userspace to determine the maximum number of slices that can be enabled on the device and also know what specific slices can be enabled. This information is required, for example, to be able to analyse some OA counter reports where the counter configuration depends on the HW slice configuration. Signed-off-by:
-
Chris Wilson authored
I removed the zapping of the reservation_object->fence array of shared fences prematurely. We don't yet have the code to zap that array when retiring the object, and so currently it remains possible to continually grow the shared array trapping requests when reusing the batch_pool object across many timelines. Signed-off-by:
-
Chris Wilson authored
Having resolved whether or not we would deadlock upon a call to mutex_lock(&dev->struct_mutex), we can then spin for the contended struct_mutex if we are not the owner. We cannot afford to simply block and wait for the mutex, as the owner may itself be waiting for the allocator -- i.e. a cyclic deadlock. This should significantly improve the chance of running the shrinker for other processes whilst the GPU is busy. A more balanced approach would be to optimistically spin whilst the mutex owner was on the cpu and there was an opportunity to acquire the mutex for ourselves quickly. However, that requires support from kernel/locking/ and a new mutex_spin_trylock() primitive. Signed-off-by:
-
Chris Wilson authored
In our first pass, we do not want to use reclaim at all as we want to solely reap the i915 buffer caches (its purgeable pages). But we don't mind it initiates IO or pulls via the FS (but it shouldn't anyway as we say no to reclaim!). Just drop the GFP_IO constraint for simplicity. Signed-off-by:
-
Chris Wilson authored
I tried __GFP_NORETRY in the belief that __GFP_RECLAIM was effective. It struggles with handling reclaim of our dirty buffers and relies on reclaim via kswapd. As a result, a single pass of direct reclaim is unreliable when i915 occupies the majority of available memory, and the only means of effectively waiting on kswapd to amke progress is by not setting the __GFP_NORETRY flag and lopping. That leaves us with the dilemma of invoking the oomkiller instead of propagating the allocation failure back to userspace where it can be handled more gracefully (one hopes). In the future we may have __GFP_MAYFAIL to allow repeats up until we genuinely run out of memory and the oomkiller would have been invoked. Until then, let the oomkiller wreck havoc. v2: Stop playing with side-effects of gfp flags and await __GFP_MAYFAIL v3: Update comments that direct reclaim only appears to be ignoring our dirty buffers! Fixes: 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations") Testcase: igt/gem_tiled_swapping Signed-off-by:
-
Chris Wilson authored
Commit 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations") made the bold decision to try and avoid the oomkiller by reporting -ENOMEM to userspace if our allocation failed after attempting to free enough buffer objects. In short, it appears we were giving up too easily (even before we start wondering if one pass of reclaim is as strong as we would like). Part of the problem is that if we only shrink just enough pages for our expected allocation, the likelihood of those pages becoming available to us is less than 100% To counter-act that we ask for twice the number of pages to be made available. Furthermore, we allow the shrinker to pull pages from the active list in later passes. v2: Be a little more cautious in paging out gfx buffers, and leave that to a more balanced approach from shrink_slab(). Important when combined with "drm/i915: Start writeback from the shrinker" as anything shrunk is immediately swapped out and so should be more conservative. Fixes: 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations") Signed-off-by:
-
- 12 Jun, 2017 11 commits
-
-
Rodrigo Vivi authored
All here is pretty much like Kabylake. Including CFL-U has to use same ddi translation table as KBL-U for now. v2: Include missed IS_COFFEELAKE on edp trans table. (DK) Handle CFL-U with same translation table as KBL-U. (DK and confirmed with HW engineers) v3: Adding missed case for IS_CFL_ULT. (DK). v4: Duh! Now with the real IS_CFL_ULT instead of KBL one. (DK) Also use IS_GEN9_BC when possible. (DK) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Kahola, Mika authored
Enable wrpll computation for Cannonlake platform to support pll's required for HDMI output. The patch contains the following features - compute Cannonlake port clock programming dividers P, Q, and K. - compute PLL parameters for Cannonlake. These parameters set the values on DPLL registers. - find the register values to program wrpll for Cannonlake. The reference clock can be either 19.2MHz or 24MHz. v2: rebase v3: squash wrpll patches into one (Rodrigo) v4: switch order of getting even dividers (Paulo) update divider register values for PDiv and KDiv (Paulo) update wrpll computation algorithm (Paulo) v5: Remove ref clock division by 1000. (Rodrigo) v6: Rodrigo rebasing on top of latest code. Signed-off-by:Kahola, Mika <mika.kahola@intel.com> Signed-off-by:
Clint Taylor <Clinton.A.Taylor@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-18-git-send-email-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
There is no platform specific change needed for LSPCON support on Cannonlake. So let's make it gen9+. Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-17-git-send-email-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
Also in a way that reuse bdw+ for all next platforms. Signed-off-by:
-
Rodrigo Vivi authored
As Geminilake scalers Cannonlake also don't need and don't have the "high quality" mode programming. Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
Since we have HAS_CSR tied to the platform definition let's use this instead of checking per platform. One less thing to worry when adding support to new platforms. Signed-off-by:
-
Anusha Srivatsa authored
This patch loads the DMC on CNL.The firmware version is 1.04. v2: (Rodrigo) Remove MODULE_FIRMWARE. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
Animesh Manna <animesh.manna@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-13-git-send-email-rodrigo.vivi@intel.com
-
Clint Taylor authored
vswing programming sequence step 2 requires the Loadgen_select bit to be set in PORT_TX_DW4 lane reigsters per table defined by Bit rate and lane width. Implemented the change that was marked as FIXME in the driver. v2: (Rodrigo) checkpatch fixes. Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1497047175-27250-12-git-send-email-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
This is an important part of the DDI initalization as well as for changing the voltage during DisplayPort link training. This new sequence for Cannonlake is more like Broxton style but still with different registers, different table and different steps. v2: Do not write to DW4_GRP to avoid overwrite individual loadgen. Fix PORT_CL_DW5 SUS Clock Config set. v3: As previous platforms use only eDP table if low voltage was requested. v4: fix Werror:maybe uninitialized (Paulo) v5: Rebase on top of dw2_swing_sel changes on previous patches. v6: Using flexible SCALING_MODE_SEL(x). Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: -
Rodrigo Vivi authored
These tables are used on voltage wswing sequence initialization on Cannonlake. It is a complete new format now in use by the voltage swing team, not following any other standard in use by any other platform. Also the registers are different as well. So let's redefine the translation table for Cannonlake. The table is huge. So we minimized with the fields that are different or might be different anytime soon. The common values will be hardcoded on the voltage swing sequence. v2: Merge the lower and the upper bits to match the spec table and make review easier. This was possible with the good idea for Manasi with a better way to handle it on the bit macro definition presented on previous patch. Credits-to: Manasi Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: -
Rodrigo Vivi authored
This are the registers and bits needed for the voltage swing sequence on Cannonlake. v2: Remove CL_DW5 that was wrongly defined. v3: Use (1 << 1) instead of (1<<1) as Paulo suggested Change DW2 swing sel upper and lower macros to do the bit selection instead of definint a table that doesn't match the spec. It is based on a Manasi version of it. Credits-to: Manasi. v4: Let SCALING_MODE_SEL flexible. (Manasi) Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
