- 11 Dec, 2009 40 commits
-
-
Alan Cox authored
Might as well use something short and obvious Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
One by one... Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Larry Finger authored
Now that active development has begun on a mainline version of a driver for the RTL8187SE that should be called rtl8187se, there is a conflict with the driver in staging with the same name. To solve the conflict, rename the driver in staging to r8187se. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Larry Finger authored
The vendor-written driver for the RTL8187SE has a private variable for the card type, even though it only occurs in PCI format. Signed-off-by:
-
Larry Finger authored
When this code is used for the rtl8187se, the value of card_8185 in struct r8180_priv is always 7 or 8. As a result, the program flow can be simplified. Signed-off-by:
Bernhard Schiffner <bernhard@schiffner-limbach.de> Signed-off-by:
-
André Goddard Rosa authored
Signed-off-by:
André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by:
-
Mariusz Ziulek authored
Signed-off-by:
Mariusz Ziulek <mz.mzet@gmail.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Robert P. J. Day authored
Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by:
-
Sebastian Dalfuß authored
This removes superfluous exclamation marks from strings and comments, and also three spelling typos. Signed-off-by:
Sebastian Dalfuß <sd@sedf.de> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Signed-off-by:
-
Amit Kucheria authored
Add driver support for the tsl2563 TAOS ambient light sensor. After looking at discussions on LKML, the driver was modified from a 'hwmon' driver to an 'iio' driver. The sysfs interfaces have been tested on an RX51 (N900) to see if it responds to changing light conditions. The only real reason for submitting this to staging is that it is dependent on the IIO subsystem. Signed-off-by:
Amit Kucheria <amit.kucheria@verdurent.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: linux-omap@vger.kernel.org Signed-off-by:
-
Amit Kucheria authored
Spell-check wouln't catch these :) Signed-off-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Randy Dunlap authored
Fix printk format warning: drivers/staging/sep/sep_driver.c:276: warning: format '%08llx' expects type 'long long unsigned int', but argument 2 has type 'dma_addr_t' and variable may be used uninitialized (correct): drivers/staging/sep/sep_driver.c:1774: warning: 'error' may be used uninitialized in this function Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
-
Randy Dunlap authored
Fix printk format warnings in vt665[56]: drivers/staging/vt6655/wpa.c:150: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int' drivers/staging/vt6655/wpa.c:181: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int' drivers/staging/vt6656/wpa.c:150: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int' drivers/staging/vt6656/wpa.c:181: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int' drivers/staging/vt6656/firmware.c:804: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int' Signed-off-by:
-
Randy Dunlap authored
max1363 uses both the iio hardware ring buffer and software ring buffer interfaces, but its Makefile and Kconfig do not reflect that usage, so its build breaks. Add a new Kconfig symbol to reflect that usage and change max1363.h & Makefile to use the new Kconfig symbol. Signed-off-by:
-
Randy Dunlap authored
USB device driver needs to depend on USB to prevent build errors: ERROR: "usb_kill_urb" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined! ERROR: "usb_deregister" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined! ERROR: "usb_control_msg" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined! ERROR: "usb_submit_urb" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined! ERROR: "usb_register_driver" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined! ERROR: "usb_free_urb" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined! ERROR: "usb_alloc_urb" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined! Signed-off-by:
-
Roel Kluin authored
`|' has a higher precedence than `?' so since MSG_WAITALL is defined 0x100, MSG_MORE was always written to the msg_flag. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Martyn Welch authored
Fix incorrect use of mutex_trylock(). Signed-off-by:
Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by:
-
Martyn Welch authored
The DMA resource allocation function is called "vme_request_dma" while master and slave window allocation functions are called "vme_master_request" and "vme_slave_request" respectively. Rename "vme_request_dma" to "vme_dma_request" to fit the pattern. Signed-off-by:
-
Martyn Welch authored
* Remove message from IACK interrupt handler * Correct clearing of location monitor interrupts * Remove interrupt cleanup code that's duplcated in sub function Signed-off-by:
-
Martyn Welch authored
The vme_lm_free() function is not clearing up the resource created in vme_lm_request(). In addition vme_lm_free() is void function and is used in exit/error paths, we should wait for mutex to become free rather than exiting and not freeing the resource. Signed-off-by:
-
Martyn Welch authored
The TSI148 driver currently does not allow a size of zero to be passed to a window. Zero is a valid value if the window is being disabled. Allow windows to be disabled and their registers cleared. Signed-off-by:
-
Greg Kroah-Hartman authored
It's causing people to ignore problems in the file, so get rid of them so it's obvious something is wrong in the future. Cc: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: -
Martyn Welch authored
Currently the VME callback infrastructure is replicated in each VME driver. Move this common code into the VME core. Rename functions to fit in better with naming of other VME functions. Signed-off-by:
-
Martyn Welch authored
Eric Sesterhenn noticed that vme_user is overflowing an array used by sprintf. Use a bigger array. CC: Eric Sesterhenn <eric.sesterhenn@lsexperts.de> Signed-off-by:
-
Huang Weiyi authored
Remove unused #include <linux/version.h>('s) in drivers/staging/vme/bridges/vme_ca91cx42.c drivers/staging/vme/bridges/vme_tsi148.c drivers/staging/vme/devices/vme_user.c drivers/staging/vme/vme.c Signed-off-by:Huang Weiyi <weiyi.huang@gmail.com> Acked-by:
-
Shawn Bohrer authored
Signed-off-by:
Shawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by:
-
Shawn Bohrer authored
Signed-off-by:
-
Shawn Bohrer authored
Signed-off-by:
-
Shawn Bohrer authored
Signed-off-by:
-
Shawn Bohrer authored
Signed-off-by:
-
Shawn Bohrer authored
The vt6656 driver is integrated in the kernel so it no longer needs the compatibility header. Signed-off-by:
-
Shawn Bohrer authored
The vt6655 driver is integrated in the kernel so it no longer needs the compatibility header. Signed-off-by:
-
Roel Kluin authored
uNodeIndex is unsigned, check whether it is within bounds instead. Signed-off-by:
-
Otavio Salvador authored
Signed-off-by:
Otavio Salvador <otavio@ossystems.com.br> Signed-off-by:
-
Roel Kluin authored
Signed-off-by:
David Daney <ddaney@caviumnetworks.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Sebastian Dalfuß authored
This patch is based on next-20091106. This tiny patch removes a few quite unnecessary extra newlines from DBGPRINT() and printk() strings. Signed-off-by:
-
Sebastian Dalfuß authored
The stuff that tries to read a file from /etc is already removed, so this patch just removes the last remainders. Signed-off-by:
-
