- 25 Jun, 2016 40 commits
-
-
Stephen Rothwell authored
Fixes: 28157164b056 ("tpm: Remove useless priv field in struct tpm_vendor_specific") Signed-off-by:Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Arnd Bergmann authored
The newly added vtpmx driver fails to build if CONFIG_ANON_INODES is disabled: drivers/char/built-in.o: In function `vtpmx_fops_ioctl': (.text+0x97f8): undefined reference to `anon_inode_getfile' This adds a Kconfig 'select' statement to ensure it's always there when we need it. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 794c38e01358 ("tpm: Proxy driver for supporting multiple emulated TPMs") Acked-by:
Stefan Berger <stefanb@linux.vnet.ibm.com> Acked-by:
-
Jason Gunthorpe authored
The devm for the IRQ was placed on the chip, not the pdev. This can cause the irq to be still callable after the pdev has been cleaned up (eg priv kfree'd). Found by CONFIG_DEBUG_SHIRQ=y Reported-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by:
-
Stefan Berger authored
Add documentation for the tpm_vtpm device driver that implements support for providing TPM functionality to Linux containers. Parts of this documentation were recycled from the Xen vTPM device driver documentation. Update the documentation for the ioctl numbers. Signed-off-by:
-
Stefan Berger authored
This patch implements a proxy driver for supporting multiple emulated TPMs in a system. The driver implements a device /dev/vtpmx that is used to created a client device pair /dev/tpmX (e.g., /dev/tpm10) and a server side that is accessed using a file descriptor returned by an ioctl. The device /dev/tpmX is the usual TPM device created by the core TPM driver. Applications or kernel subsystems can send TPM commands to it and the corresponding server-side file descriptor receives these commands and delivers them to an emulated TPM. The driver retrievs the TPM 1.2 durations and timeouts. Since this requires the startup of the TPM, we send a startup for TPM 1.2 as well as TPM 2. Signed-off-by:
-
Stefan Berger authored
Introduce TPM_CHIP_FLAG_VIRTUAL to be used when the chip device has no parent device. Prevent sysfs entries requiring a parent device from being created. Signed-off-by:
-
Jason Gunthorpe authored
The final thing preventing this was the way the sysfs files were attached to the pdev. Follow the approach developed for ppi and move the sysfs files to the chip->dev with symlinks from the pdev for compatibility. Everything in the core now sanely uses container_of to get the chip. Signed-off-by:
-
Christophe Ricard authored
Remove useless priv field in struct tpm_vendor_specific and take benefit of chip->dev.driver_data. As priv is the latest field available in struct tpm_vendor_specific, remove any reference to that structure. Signed-off-by:
Christophe Ricard <christophe-h.ricard@st.com> Reviewed-by:
-
Christophe Ricard authored
Move tpm_vendor_specific data related to TCG PTP specification to tpm_chip. Move all fields directly linked with well known TCG concepts and used in TPM drivers (tpm_i2c_atmel, tpm_i2c_infineon, tpm_i2c_nuvoton, tpm_tis and xen-tpmfront) as well as in TPM core files (tpm-sysfs, tpm-interface and tpm2-cmd) in tpm_chip. Signed-off-by:
-
Christophe Ricard authored
Dropped the field 'locality' from struct tpm_vendor_specific migrated it to the private structures of st33zp24, tpm_i2c_infineon and tpm_tis. Signed-off-by:
-
Christophe Ricard authored
Dropped the field 'read_queue' from struct tpm_vendor_specific and make it available to the various private structures in the drivers. Signed-off-by:
-
Christophe Ricard authored
Dropped the field 'irq' from struct tpm_vendor_specific and make it available to the various private structures in the drivers using irqs. A dedicated flag TPM_CHIP_FLAG_IRQ is added for the upper layers. In st33zp24, struct st33zp24_dev declaration is moved to st33zp24.h in order to make accessible irq from other phy's(i2c, spi). In tpm_i2c_nuvoton, chip->vendor.priv is not directly allocated. We can access irq field from priv_data in a cleaner way. Signed-off-by:
-
Christophe Ricard authored
Dropped the field 'iobase' from struct tpm_vendor_specific and migrated it to the private structures of tpm_atmel and tpm_tis. Signed-off-by:
-
Christophe Ricard authored
Dropped list from struct tpm_vendor_specific as it is not used in any place. It is initialized in tpm_i2c_infineon but not used at all in the code. Signed-off-by:
-
Jarkko Sakkinen authored
Removed the field because it is not used for anything. Signed-off-by:
-
Jarkko Sakkinen authored
Dropped the field 'base' from struct tpm_vendor_specific and migrated it to the private structures of tpm_atmel and tpm_nsc. Signed-off-by:
-
Jarkko Sakkinen authored
Dropped manufacturer_id from struct tpm_vendor_specific and redeclared it in the private struct priv_data that tpm_tis uses because the field is only used tpm_tis. Signed-off-by:
-
Jarkko Sakkinen authored
Introduced a private struct tpm_atmel_priv that contains the variables have_region and region_size that were previously located in struct tpm_vendor_specific. These fields were only used by tpm_atmel. Signed-off-by:
-
Jarkko Sakkinen authored
Drop field int_queue from tpm_vendor_specific as it is used only by tpm_tis. Probably all of the fields should be eventually dropped and moved to the private structures of different drivers but it is better to do this one step at a time in order not to break anything. Signed-off-by:
-
Jarkko Sakkinen authored
Fixes: 20e0152393b41 ("tpm: fix crash in tpm_tis deinitialization") Signed-off-by: -
Jarkko Sakkinen authored
On my Lenovo x250 the following situation occurs: [18697.813871] tpm_crb MSFT0101:00: can't request region for resource [mem 0xacdff080-0xacdfffff] The mapping of the control area overlaps the mapping of the command buffer. The control area is mapped over page, which is not right. It should mapped over sizeof(struct crb_control_area). Fixing this issue unmasks another issue. Command and response buffers can overlap and they do interleave on this machine. According to the PTP specification the overlapping means that they are mapped to the same buffer. The commit has been also on a Haswell NUC where things worked before applying this fix so that the both code paths for response buffer initialization are tested. Cc: stable@vger.kernel.org Fixes: 1bd047be ("tpm_crb: Use devm_ioremap_resource") Signed-off-by:
-
Christophe Ricard authored
We can get rid of tpm_reg variable in get_burstcount. Signed-off-by:
-
Christophe Ricard authored
When st33zp24_spi_acpi_request_resources() gets called we already know that the entries in ->acpi_match_table have matched ACPI ID of the device. In addition spi_device pointer cannot be NULL in any case (otherwise I2C core would not call ->probe() for the driver in the first place). Drop the two useless checks from the driver. Signed-off-by:
-
Christophe Ricard authored
When st33zp24_i2c_acpi_request_resources() gets called we already know that the entries in ->acpi_match_table have matched ACPI ID of the device. In addition I2C client pointer cannot be NULL in any case (otherwise I2C core would not call ->probe() for the driver in the first place). Drop the two useless checks from the driver. Signed-off-by:
-
Jarkko Sakkinen authored
The iomem resource is needed only temporarily so it is better to pass it on instead of storing it permanently. Named the variable as io_res so that the code better documents itself. Signed-off-by:
-
Jarkko Sakkinen authored
rmmod crashes the driver because tpm_chip_unregister() already sets ops to NULL. This commit fixes the issue by moving tpm2_shutdown() to tpm_chip_unregister(). This commit is also cleanup because it removes duplicate code from tpm_crb and tpm_tis to the core. Fixes: 4d3eac5e156a ("tpm: Provide strong locking for device removal") Signed-off-by: -
Jarkko Sakkinen authored
Created a local variable pointing to the INT_ENABLE_x register. The expression clearing INT_ENABLE_x.globalIntEnable is unreadable and hard to modify without surpassing the 80 char boundary. Signed-off-by:
-
Arnd Bergmann authored
A cleanup patch changed the prototype of the regular tpm_bios_log_setup function, but not that of the stub that is used when the TPM is disabled, causing a harmless build warning: drivers/char/tpm/tpm-chip.c: In function 'tpm1_chip_register': drivers/char/tpm/tpm-chip.c:287:38: error: passing argument 1 of 'tpm_bios_log_setup' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] chip->bios_dir = tpm_bios_log_setup(dev_name(&chip->dev)); In file included from ../drivers/char/tpm/tpm-chip.c:30:0: ../drivers/char/tpm/tpm_eventlog.h:83:31: note: expected 'char *' but argument is of type 'const char *' static inline struct dentry **tpm_bios_log_setup(char *name) This changes the stub function to match the normal prototype, avoiding that warning. Signed-off-by:
-
Stefan Berger authored
Replace the device number bitmap with IDR. Extend the number of devices we can create to 64k. Since an IDR allows us to associate a pointer with an ID, we use this now to rewrite tpm_chip_find_get() to simply look up the chip pointer by the given device ID. Protect the IDR calls with a mutex. Signed-off-by:
-
Jason Gunthorpe authored
tpm_chip_alloc becomes a typical subsystem allocate call. Signed-off-by:
-
Stefan Berger authored
Now that the tpm core has strong locking around 'ops' it is possible to remove a TPM driver, module and all, even while user space still has things like /dev/tpmX open. For consistency and simplicity, drop the module locking entirely. Signed-off-by:
-
Jason Gunthorpe authored
Add a read/write semaphore around the ops function pointers so ops can be set to null when the driver un-registers. Previously the tpm core expected module locking to be enough to ensure that tpm_unregister could not be called during certain times, however that hasn't been sufficient for a long time. Introduce a read/write semaphore around 'ops' so the core can set it to null when unregistering. This provides a strong fence around the driver callbacks, guaranteeing to the driver that no callbacks are running or will run again. For now the ops_lock is placed very high in the call stack, it could be pushed down and made more granular in future if necessary. Signed-off-by:
-
Jason Gunthorpe authored
Now that we have a proper struct device just use dev_name() to access this value instead of keeping two copies. Signed-off-by:
-
Jason Gunthorpe authored
This is a hold over from before the struct device conversion. - All prints should be using &chip->dev, which is the Linux standard. This changes prints to use tpm0 as the device name, not the PnP/etc ID. - The few places involving sysfs/modules that really do need the parent just use chip->dev.parent instead - We no longer need to get_device(pdev) in any places since it is no longer used by any of the code. The kref on the parent is held by the device core during device_add and dropped in device_del Signed-off-by:
-
Christophe RICARD authored
Simplify st33zp24_spi_acpi_request_resources, st33zp24_spi_of_request_resources and st33zp24_spi_request_resources to have the same prototype and using spi_get_drvdata. Signed-off-by:
-
Christophe RICARD authored
Simplify st33zp24_i2c_acpi_request_resources, st33zp24_i2c_of_request_resources and st33zp24_i2c_request_resources to have the same prototype and using i2c_get_clientdata. Signed-off-by:
-
Christophe RICARD authored
Add support for acpi probing. SMO3324 is used for st33zp24. It has been tested with the following acpi node on Minnowboard: Device (TPM1) { Name (_ADR, Zero) // _ADR: Address Name (_HID, "SMO3324") // _HID: Hardware ID Name (_CID, "SMO3324") // _CID: Compatible ID Name (_DDN, "SMO TPM") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (SBUF, ResourceTemplate () { SpiSerialBus (0, PolarityLow, FourWireMode, 8, ControllerInitiated, 4000000, ClockPolarityLow, ClockPhaseFirst, "\\_SB.SPI1", 0x00, ResourceConsumer, ,) GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0001 } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0002, } }) Return (SBUF) /* \_SB_.SPI1.TPM1._CRS.SBUF */ } Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } Signed-off-by: -
Christophe RICARD authored
Add support for acpi probing. SMO3324 is used for st33zp24. It has been tested with the following acpi node on Minnowboard: Device (TPM1) { Name (_ADR, Zero) // _ADR: Address Name (_HID, "SMO3324") // _HID: Hardware ID Name (_CID, "SMO3324") // _CID: Compatible ID Name (_DDN, "SMO TPM") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (SBUF, ResourceTemplate () { I2cSerialBus (0x0013, ControllerInitiated, 400000, AddressingMode7Bit, "\\_SB.I2C7", 0x00, ResourceConsumer, ,) GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0001 } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0002, } }) Return (SBUF) /* \_SB_.I2C7.TPM1._CRS.SBUF */ } Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } Signed-off-by: -
Christophe RICARD authored
Extend copyright header to 2016 Signed-off-by:
-
Christophe RICARD authored
Add check in st33zp24_spi_evaluate_latency helping to diagnose if the chip is present or in a bad state. Signed-off-by:
-
